JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader

Specification:-

• Model: JT308
• Frequency: 125Khz.
• Power input: Through usb 
• Support for EM4100 cards
• Interface: USB, 106bit / s, no additional driver required.
• Read the first 10 digits of the RFID/Proximity card.

RDM 6300-125KHZ EM4100 RFID Card Reader Module

Specification:-

• Frequency: 125KHZ
• Humidity: 0~95%
• Working voltage: DC 5V(+/-5%)
• Interface: TTL level RS232 format
• Working temperature: -10°C~+70°C

RC522 RFID Card Reader Module 13.56MHz

Specification:-

• Working Current @ 3.3V: 13 – 26mA
• Standby Current @ 3.3V: 10 – 13mA
• Sleep Current: <80μA
• Peak Current: <30mA
• Working Frequency: 13.56MHz
• Card Reading Distance: 0-60mm
• Communication Protocol: SPI
• Data Communication Speed: 10Mbit/s Max

R307 Optical Fingerprint Reader Sensor Module

Specification:-

1. Type: Optical
2. Sensor Life: 100 million times
3. Static indicators: 15KV
4. RS232 communication baud rate: 9600BPS~115200BPS changeable
5. Image Capture Surface 20*15(mm)
6. Verification Speed:  0.2 sec
7. Scanning Speed: 0.3 sec
8. Character file size:  256 bytes

Remote tester radio frequency infrared reader remote key frequency tester

Specifications

1. Operating voltage : 9V
2. RF range : 418MHz 433-434MHz
3. Power consumption : 26mA
4. Precise timing response
5. High radio frequency parameters
6. Easy to use
7. Suitable for a wide range of remote testing applications

R305 Optical Fingerprint Reader Sensor Module

Specification:-

• Type: Optical
• Sensor Life: 100 million times
• Static indicators: 15KV
• Verification Speed: 0.3 sec
• Scanning Speed: 0.5 sec
• Character file size: 256 bytes
• Supply voltage: DC 3.6 ~ 6.0V / 3.3V
• Supply Current: Current: <120mA
• Fingerprint image time: <1.0 seconds

Micro SD Card Reader Module

Specification :-

• Input Voltage: 3.3V/5V
• Current: 0.2~200mA
• Working voltage: VCC 4.5~5.5V
• Micro SDHC up to 32GB
• Supports Micro SD up to 2GB
• Pinouts: GND, VCC, MISO, MOSI, SCK, CS; SPI
• Micro SD Card Slot: Supports standard micro SD cards

Mini Micro SD Card Reader Module

Specification:-

• Operating voltage: DC 2.6 to 3.6V
• Audio output: 16bitDAC and PWM
• Supports FAT file system SD carrier
• Supports playing of 4Bit ADCPM format files
• Pinouts: GND, VCC, MISO, MOSI, SCK, CS
• Supports playing of 4Bit ADCPM format files

13.56MHz RFID Keychain Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency:  13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Blue
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Keychain Pack of 10

Specification:-

• Range: 0-10 cm
• Frequency:  13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Blue
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

Combo of RC522 RFID Door Lock Arduino Project Kit (46 pcs)

Specification :- 

• 13.56MHz RFID Card Reader Module
• Working Current @ 3.3V: 13 – 26mA
• Standby Current @ 3.3V: 10 – 13mA
• UNO R3 AVR USB Development board
• 26AWG Jumper Wire cable 
• 9V battery clip connector with 3.5mm pin jack
• USB Cable for Arduino Nano
• 9V 6F22M Hi-Watt Non-rechargeable battery 

Package Included :- 1 x RC522 RFID 13.56MHZ Reader Writer Module, 1 x Arduino Uno R3 Compatible board, 1 x SG90 Servo Motor, 1 x High Quality 9V Battery, 1 x USB Cable for Arduino Nano , 1 x 9V Battery Clip Connector, 1 x 20cm Male To Male Jumper Cable Wire, 1 x 20cm Male To Female Jumper Cable Wire

13.56MHz RFID Tag with Black Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32-bit Unique ID
• Color: Black
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Green Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Green 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Red Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Red 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Yellow Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Yellow 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Multicolor Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Multicolor 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Multicolor Keychain for Access Control (2 pcs each)

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Multicolor 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

Level-2 Advanced Starter Kit Compatible with Arduino IDE & Uno R3 | RFID, Bluetooth & IoT Learning (114 Item)

Specification:-

• Complete Arduino Kit with 100+ components.
• Includes an Uno R3 and 830-point breadboard
• 12 x 12 x 7 mm tactile switch with cap
• Resistor type: 1/4 watt carbon film resistor
• SG90 Servo Motor
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• Resistor type: 1/4 watt carbon film resistor (220K, 330K, 1K)

Kit Included: 1 pcs Adruino Uno R3 | 1 pcs 830 Points Breadboard | 1 pcs USB Cable | 40 pcs Jumper Wires (Male to Male / Female to Male mix) | 1 pcs 1602 LCD Display | 1 pcs 7 Segment Display (1 Digit) | 1 pcs 4×4 Keypad | 1 pcs Stepper Motor | 1 pcs Stepper Motor Driver Module | 1 pcs Servo Motor (SG90) | 1 pcs Potentiometer (10K) | 1 pcs Active Buzzer | 1 pcs Passive Buzzer | 1 pcs IR Remote + IR Receiver | 1 pcs RTC (Real Time Clock) Module | 1 pcs RFID Module with Tag & Key | 1 pcs Joystick Module | 1 pcs Photoresistor (LDR Sensor) | 1 pcs Flame Sensor | 1 pcs Tilt Switch / Vibration Sensor (small module) | 1 pcs Sound Sensor Module | 1 pcs Water Sensor Module | 1 pcs DHT11 Temperature & Humidity Sensor | 1 pcs RGB LED Module | 1 pcs DC Motor Driver IC Module (L293D based) | 1 pcs 5V Relay Module | 1 pcs Battery Plug (9V Connector) | 30 pcs Resistor Pack (assorted values) | 15 pcs LEDs (Red, Green, Yellow)  | 5 pcs Push Button with Caps

Electronic Sensors Kit with DIY Projects Controller Board, RFID, Ultrasonic, IR, Smoke Components (95 Item)

Specifications:-

• 400 points Half size Solderless breadboard
• UNO R3 AVR USB Development board
• 6V - 12V DC Mini underwater pump
• Humidity Detection Moisture Sensor
• 16 x 2 Yellow/Green color LCD display
• RC522 RFID Card Reader Module
• Flammable gas and smoke detection sensor
• IR Proximity Sensor for Line Follower
  

Component List: 1 Pcs Controller Board, 1 Pcs Breadboard, 1 Pcs 4X4 16 Matrix Membrane Keypad, 1 Pcs USB cable, 1 Pcs Ultrasonic Sensor, 1 Pcs IR Proximity Module 1 Pcs DHT-11 Sensor, 1 Pcs MQ-2 smoke detection sensor module, 1 Pcs RC522 RFID Card Reader Module, 1 Pcs 16x2 LCD, 1 Pcs Soil Hygrometer Humidity, 1 Pcs mini water Pump, 5 pieces each of red, green, and white LEDs, 1 Pcs RGB LED, 10 Pcs Resistor (100K), 1 piece of 9V battery, 2 Pcs 100K ohm vertical preset variable resistors, 1 piece of 1-digit 7-segment Display 1 Pcs Buzzer, 2 Pcs push button switch (12x12x7), 4 Pcs NPN transistor (BC547), 2 Pcs rectifier diodes (1N4007 ), 1 Pcs light-dependent resistor (GL5528), 1 Pcs 9V battery connector, 40 Jumper wires (Male to Female, Male to Male)