Mini USB Rechargeable Handheld Fan | Multicolour 3 Speed, Portable Cooling Fan

Specifications :-

• function : 3 Speed
• Battery Voltage:3.7
• Output Power : 1.5W
• Input Current : 0.3-0.5A
• Output Voltage: 3-4.5V
• charging Time:2-4h
• Product Weight : 103g
• Interface Type : Type C
• Product Size : 7.5L x 7.5W x 15.5H CM

Note :- This is a multi color product.The color of the item delivered will depend on stock availability.

Mini Portable Handheld Fan USB Rechargeable | Multi color, 3 Speed Modes for Travel & Outdoor Use

Specifications:-

• Input Voltage : 5 V
• Input Current : 1 A
• Output Voltage : 5-9 V
• Output Power : 5 W
• Battery : 14500-3.7 V
• Charging Method: USB Charging
• Control Type: One-Button Operation
• Design: Handheld & Portable

4000rpm 3V-9V DC high speed mini electric motor

Specification:-

1. Motor diameter  :  2.7mm approx.
2. Motor length  :  50mm approx.
3. Working voltage range  :  3V to 9V
4. Power rating  :  1.2W
5. Rated current  ;  0.6A
6. Keep away from children under 15 years

PWM DC Motor Speed Controller Speed Switch Module 6V/12V/24V/28V 3A 1203B

Specification:-

• Model: 1203B
• Input Voltage: 6V–28V DC
• Output Current: Max 3A continuous
• Control Method: PWM (Pulse Width Modulation)
• Speed Adjustment: Rotary potentiometer (knob)
• Compact & lightweight PCB design

4.5V to 35V DC PWM Speed Controller Mini Electrical Motor Control Switch LED Dimmer Module

Specification:-

1. Operating voltage: DC 4.5V to 35V
2. Control power: 90W (maximum)
3. Quiescent current: 0.015A (standby)
4. PWM duty cycle: 1% -100%
5. PWM frequency: 10khz
6. Size: 29mm*23mm
7. Total height: 15mm

3V Small electric DC toy motor with high speed pack of 2pcs

Specifications:-

• Operating voltage:  3V
• Recommended/Rated voltage:  3V
• Current at no load:  70mA
• No-load speed:  1800 rpm
• Loaded current:  250mA (approx.)
• Rated load:  10g*cm

10 channel DC LED chaser with adjustable speed

Specifications:-

• Led chaser circuit with 10 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice projects.

LM393 Motor speed measuring groove coupler sensor module

Specification:-

1. Working voltage  :  3.3V to 5V
2. Output  :  digital switch output (0 and 1)
3. Equipped with a fixed bolt hole, easily install.
4. Small board PCB size  :  3.2 cm x 1.4 cm.
5. Use the LM393 wide voltage comparer.

12V DC 6 pin 3 Way On/Off/On SPCO Rocker Reverse and Forward motor controller switch

Specification:-

1. 100% Original and best quality product
2. Max. current withstand  :  250V
3. Max. power rating  :  6A
4. High temperature withstand
5. Long life approximately 10,000 clicks
6. High wear and tear properties
7. Durable and excellent design

100K potentiometer with 3 pin XH JST male connector for Volume control, Motor speed control

Specifications:-

• Material:- Metal, Plastic
• Resistance Value:- 100K
• Adjustment Type:- Top Adjustment
• Rotary Knob Shaft Length:- 13mm
• Main used to control electrical device such as volume controls on audio equipment

1N914 100V ,DO-34/DO-35 High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 75mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 250mW
• Package : DO-34/DO-35

1N4148 100V ,DO-34/DO-35 High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 150mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 500mW
• Package : DO-34/DO-35

1N4448 100V ,DO-34/DO-35 High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 150mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 500mW
• Package : DO-34/DO-35

LL4448 100V ,MINI MELF High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 150mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 500mW
• Package : MINI MELF

Diy mini Motor speed controller kit ( Battery Holder, Push Connector, Motor, 3Blade Propeller, Cell’s, Motor speed controller) with User Manual and Video Tutorial

Specification

• 100% Best quality and Branded Products
• Diy mini Motor speed controller kit
• The kits are easy to assemble and come with a build guide
• Very easy to make and the parts are easy to find
• Excellent choice for a starter pack

3 channel DC LED chaser with adjustable speed Pack of 1pcs

Specification:-

• High quality
• LED chaser circuit with 3 LED outputs
• 100k Persist for adjust speed and time
• Package include :- 1pcs 3 channel LED chaser
• Best for making electronic projects.

10K potentiometer with 3 pin XH JST male connector for Volume control, Motor speed control

Specifications

• Material: metal, plastic
• Resistance value: 10k ohm
• Adjustment type: top adjustment 
• Knurled shaft: total rotational angle: 300C
• Terminal number : 3 shaft diameter: 6mm
• Rotary knob shaft length: 13mm
• Main used to control electrical devise such as volume controls on audio equipment

3V DC Motor High Speed for Toy Car DIY Motors

Specifications : - 

• Small in size.
• Voltage range: DC 3V 
• Durable and not easy to damage.
• For toy car DIY.
• Metal case body for protection

Mini Electric Motor 5000 to 10000 RPM High Speed Miniature DC Motors 3Vto 6V for Toy Cars pack of 5

Specification:-

• Rated Voltage: 3V 
• Item Type: Mini Electric Moto
• DC motor has strong power
• high efficiency
• large torsion
• high speed
• low noise and long life.

DC 3V 5200RPM High-Speed Micro Mini Vibration Motor

Specifications:-

• Speed: 5200 RPM
• Voltage: 3 Volts
• Material: Metal, Plastic
• Good quality and Suitable to use.
•  Micro Vibration Motor
• Light Weight Motor

6V DC Motor Micro High Speed 360-ST Motor for DIY toy

Specifications:-

• Material: Metal, Copper
• Speed: 3000 RPM
• Voltage: 6 volts
• Excellent working mechanism
• Metal case body for protection
• Produce electricity by converting rotary motion into electric current

4000W 220V PWM High-Power Dimming Speed Regulator

Specifications :-

• Input Voltage: 220V AC.
• Maximum Power: 4000W.
• Adjustable Voltage: 0-220V AC.
• AC frequency: 50-60Hz.

DIY Ultra Robot Smart Car Kit with 4 Speed Encoder, 4 Wheels and 4 AA Cell Battery Holder

Specification:-

• Material: Plastic
• This car is the tachometer encoder.
• It can be used for distance measurement, velocity.
• With a 4 AA battery holder
• The motor power supply is 3V ~ 6V

6V 12V 24V 28V 3A 80W 1203BB DC Motor Speed Controller PWM Reversible Motor Driver Switch

Specification:-

• Voltage: DC 6-28 V.
• Wattage: 80W
• Power and Plug Description: Power Source
• Current: 3A
• Potentiometer with switch function
• DC motor speed controller is connected to DC power supply

25CM USB 90 Degree Cable Type A Male to Female High Speed Connection

Specification

• High performance
• Product Type: USB 2.0 Extension Cable
• Connector Type : Male-to-Female
• Color : Black
• Compatible Devices : Laptop, Scanner, Personal
• Size: 25 cm (approx)

47K potentiometer with 3 pin XH JST male connector for Volume control, Motor speed control

Specifications:-

• Material:- Metal, Plastic
• Resistance Value:- 47K
• Adjustment Type:- Top Adjustment
• Rotary Knob Shaft Length:- 8mm
• Main used to control electrical device such as volume controls on audio equipment

3V 900RPM DC Gear Motor, Slow Speed 4mm Small Shaft Centre Electric Gearbox Motor 2-Wire Connecting

Specifications:-

• Speed: 900 RPM
• Voltage:3 Volts
• Product diameter: 40mm
• Shaft diameter: 4mm

4V Mini Electric Motor 3000 RPM High Speed DC Motor for Toy Cars

Specification:-

• Rated Voltage: 4V 
• Item Type: Mini Electric Moto
• DC motor has strong power
• high efficiency
• large torsion
• high speed
• low noise and long life.

3-12v Dc Small Electric High Speed Motor for DIY Toy

Specifications:-

• Material: Metal, Copper
• Speed: 3000 RPM
• Voltage: 12 volts
• High quality motor
• Excellent working mechanism
• Metal case body for protection

3 channel DC LED chaser with adjustable speed (40mm x 30mm)

Specification:-

• Led chaser circuit with 3 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice projects.

6 channel DC LED chaser with adjustable speed (39mm x 33mm)

Specification:-

• Led chaser circuit with 6 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice projects.

Multi channel DC LED chaser with adjustable speed (53mm x 35mm)

Specification :-

• It is 10-channel circuit
• LED chaser circuit with multi-led outputs
• Variable frequency.
• Best for making electronic projects.
• Ideal for making LED dice projects.
• It has 2 Channel, 3 Channel, 4 Channel, 5 Channel , 6 Channel,  7 Channel, 8 Channel, 9 Channel, and a 10-channel LED Chaser pad

304K/ZL Peristaltic Pump 6000RPM 24V High Speed DC Motor

Specification:-

• Voltage: 24V/2A
• Motor Speed: 6000 rpm
• Motor Type: 775 DC Motor
• Power Source: Corded Electric
• low-noise and long-life
• 304K can load with 3 kinds of motor:  DC Geared Motor, DC Planetary Gear Motor, Stepper Motor and Brushless Motor

Combo of DF50S12M Brushless 12V 0.10A Air Blower Fan With Speed Controller

Specification:-

• Model: DF50S12M DC Motor Speed Regulator
• Speed of 4500 RPM
• Low-Noise Operation
• High-Speed Performance

Combo of Motor PWM Speed Controller with Adjustable Switch | Screwdriver | 2m Copper Wire

Specification:- 

• Voltage: 35 Volts
• PWM Frequency: 20khz
• Current Range: Within 5A
• PWM duty cycle: 1% -100%
• Adjustable Speed Range: 0~100%
• 1.5mm flat-tip stainless steel liner screwdriver

Package Includes: 1 x DC Motor Speed Control Switch 1 x Screwdriver 2 mtr Copper Electrical Wire

Combo of 3.7V 716 Coreless DC Motors with Propellers for Mini Drones (8 Motors + 8 Blades)

Specifications:-

• Voltage: DC 3.7V
• Current: 0.8A
• Speed: 48000 RPM
• Motor length: 16mm
• Propeller length: 45mm

Package Include: 8 x Motor, 8 x Propeller (2xCW and 2xCCW)

15V 360mA Power Supply DC Mi Trimmer Charger Adapter

Specification:-

• Input voltage: 100V to 240V AC
• Output Voltage: 15V
• Max. frequency range: 50 to 60 Hz
• Connector type: 2 pin
• Compatible Devices: Mi Trimmer
• Over-current, overload and short-circuit protection
• High-quality adapter with the latest and advanced technology

AC 220V 2000W High-Power Electric Voltage Regulator Motor Speed Controller

Specification:-

• Type: Integrated circuit module
• Input voltage: 220V.
• Maximum power: 2000W.
• Adjustable voltage: 50–220V AC
• Material: plastic, metal.
• Size: 4.8cm x 5.5cm x 2.7cm.

30mm x 11mm Hard Plastic Build Rubber Cover Wheels for RC Toys Cars with Shaft (Multicolor)

Specification:-

• 100% high-quality branded toy wheels
• Diameter of the revolution: 30mm
• Color: Multicolor
• Shaft Diameter: 2mm
• Perfect for DIY Toy
• High-quality material build
• The material of Wheel: High-strength plastic
• The material of Wheel: Rubber

FK-260SA-09450 2mm Shaft 12V DC High Speed Electric Shaver Toy Motor

Specification:-

• Voltage Range (VDC): 12-24
• No Load Speed (RPM): 5800
• Rated Speed (RPM): 4630
• Made of good material
• Output shaft diameter: 2.0mm
• Motor size: 27mm x 18mm x 24mm

SC4582G A10K 73mm Dual Channel Linear Slide Potentiometer Pack of 5

Specification:-

• Potentiometer type : slide
• Maximum resistance : 10KΩ
• Total length of the pot : 73mm
• Travel length : 58mm
• Power rating : 0.5W
• Element material : carbon
• Actuator type : Lever
• Tolerance : 20%

Combo of L293D Motor Driver and BO Motor with Rubber Wheels & Jumper wire for DIY Smart Car Kit

Specifications:-

• Motor Type: BO Motor
• Wheel Type: BO Wheel
• Motor Driver: L293D
• L293D 4-Channel DC Motor Driver
• Ideal For: Robotics, DIY Projects
• Ease of Use: Easy to assemble and use

Package Included: 1pcs L293D Motor Driver Shield, 4pcs DC Motors, 4pcs Wheels, Jumper wire (Male To Male, Female To Female, Male To Female)-(20pcs Each)

Mini Portable Humidifier Air Conditioner Spray Cooling Fan With 3 Speed Mode

Specification:-

• Input: 5V - 2.0A
• Power: 10W
• Power Source: Electric
• Interface Type: USB Type-C
• Controls Type: Button
• Color: black

Simonk-30A BLDC ESC Electronic Speed Controller with Deans Connector

Specification:-

• Model: SIMONK 30A.
• Constant Current: 30A (Max 40A < 10 sec).
• BEC: 5V 2A.
• Suitable Batteries: 2-3S LiPo.
• Application: BLDC Motors, Multirotor, RC Planes etc.

DC 9-60V 20A PWM DC Motor Speed Controller

Specification:-

• Working voltage: 9-60V
• Voltage: 220 Volts (AC)
• Max current: 20A
• Continuous current: 18A
• Power Source: DC
• Speed control mode: Potentiometer.

1.8V to 12V 2A DC PWM Speed Controller Mini Electrical Motor Control Switch

Specification:-

• Input supply voltage: 1.8V- 15V DC
• The maximum output power: 30W
• Output current : 2A(Max)
• Size: 32mm x 32mm
• Potentiometer with switch function for PWM adjustment

74LS139 High Speed Dual 1-of-4 Decoder/De-Multiplexer SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 34mW
• Supply Voltage: 7V
• Input Voltage: 7V
• Operating Free Air Temperature Range: 0°C to +70°C
• Storage Temperature Range: −65°C to +150°C

AM26LV32 Low-Voltage High-Speed Quadruple Differential Line Receiver SMD IC

Specification:-

• Mounting: SMD
• Number of: 16 Pins
• Input Hysteresis: 50 mV Typical
• Operates From Single 3.3-V Supply
• Ultra-Low Power Dissipation: 27 mW Typical
• Switching Rates Up to 32 MHz
• 235 mW With Four Receivers at 32 MHz

AM26LV31 Low-Voltage High-Speed Quadruple Differential Line Driver SMD IC

Specification:-

• Mounting: SMD
• Number of: 16 Pins
• Switching Rates up to 32 MHz
• Operate From a Single 3.3-V Supply
• Propagation Delay Time: 8 ns Typical
• Pulse Skew Time: 500 ps Typical
• High Output-Drive Current: ±30 mA
• Controlled Rise and Fall Times: 3 ns Typical
• Differential Output Voltage With 100-Ω

MC33078 Dual High Speed Low Noise Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply voltage (VCC+): 18 V
• Supply voltage (VCC-): -18 V
• Input current: ±10 m A
• Supply voltage (VCC+ to VCC-): 36 V
• Low Noise Voltage 4.5 nV/√Hz
• Large Output-Voltage Swing 14.1 V to
• Storage temperature range: –65°C to150 °C

MC34152P MC34152 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: −0.3 to VCC V
• Gate Drive Output-Source Current: 1.5 A
• Maximum Power Dissipation = 50°C: 0.56 W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to +70 °C
• Storage Temperature Range: -65 to +150 °C

MC34151 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: −0.3 to VCC V
• Gate Drive Output-Source Current: 1.5 A
• Maximum Power Dissipation = 50°C: 0.56 W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to +70 °C
• Storage Temperature Range: -65 to +150 °C
• Two Independent Channels with 1.5 A Totem Pole Output

MC33151 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: VEE −0.3 to VCC V
• Totem Pole Sink or Source Current: 1.5 A
• Maximum Power Dissipation  = 50°C: 0.56 W
• Maximum Power Dissipation = 50°C: 1W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to 70 °C
• Storage Temperature Range: -65 to +150 °C

4.5V to 35V DC PWM Speed Controller | Electrical Motor Control Switch LED Dimmer Module Pack of 5

Specification:-

• Operating voltage: DC 4.5V to 35V
• Control power: 90W (maximum)
• Quiescent current: 0.015A (standby)
• PWM duty cycle: 1% -100%
• PWM frequency: 10khz
• Size: 29mm*23mm
• Total height: 15mm

150 ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 1206
2. Resistance : 150
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

MP3 Decoder Board Audio Wireless Bluetooth Module Module Support USB Disk / SD / Bluetooth / FM / LIN Modes (110BT V2.0)

Specification

1. Working voltage:  5V
2. Support:  mp3/Bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Remote for easy handling
5. Can connect speakers directly
6. included JST wire

Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control

Specifications:-

1. Operating Voltage: DC 4.8-6V
2. Offer 3 modes to check servos or ESC
3. Connect to up to 3 servos simultaneously
4. Connect up to 3 ESCs to test and compare their reaction time respectively
5. Built with LED indicators

6 channel DC LED chaser with adjustable speed pack of 1pcs

PRODUCT SPECIFICATIONS:-

• Led chaser circuit with 6 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice project.

6 channel DC LED chaser with adjustable speed pack of 5pcs

PRODUCT SPECIFICATIONS:-

• Led chaser circuit with 6 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice project.

6 channel DC LED chaser with adjustable speed pack of 10pcs

PRODUCT SPECIFICATIONS:

• Led chaser circuit with 6 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice project.

4 channel DC LED chaser with adjustable speed pack of 1pcs

Specifications:-

1. Led chaser circuit with 4 led outputs.
2. Variable frequency.
3. Best for making electronic projects.
4. Ideal for making led dice projects.

12V Electric adjustment switch regulator PWM motor controller switch

Specifications:-

1. Input supply voltage: DC 12V to 40V
2. The maximum output power: is 400W
3. The maximum continuous output current: 8A
4. Static current: 0.02 A (Standby)
5. PWM frequency: 13kHz
6. Duty cycle adjustable: 10% to 100%

RJ45 High speed Ethernet patch LAN cable 10 meter

Specifications

1. Cable type: Ethernet patch cable
2. Connector type: RJ45
3. Solid core: 568B
4. Wire material: Copper
5. Cable length: 10 meters
6. Supports 10 Gigabit Ethernet
7. Better heat dissipation for PoE application
8. Bare copper conductors

RJ45 High speed Ethernet patch LAN cable 5 meter

Specifications

1. Cable type : Ethernet patch cable
2. Connector type : RJ45
3. Solid core : 568B
4. Wire material : Copper
5. Cable length : 5 meter
6. Supports 10 Gigabit Ethernet
7. Better heat dissipation for PoE application
8. Bare copper conductors

LL914 100V ,MINI MELF High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 75mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 250mW
• Package : MINI MELF

LL4148 100V ,MINI MELF High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 150mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 500mW
• Package : MINI MELF

DC Motor, High Speed Shaft Centre Electric Gearbox Motor 2-Wire Connecting

Specifications:-

• High speed gearbox motor.
• Operating voltage : 3V To 5V.
  
• Stable and reliable performance.
• Good quality and Suitable to use.
• Excellent quality and long service life
• These are simple DC motors featuring. 

PWM DC Motor Speed Controller 12V-40V 10A Module

Specification:-

• Input supply voltage:- DC 12V-40V
• The maximum continuous output current:- 8A
• The maximum output power:- 400W
• PWM frequency:- 13kHz

• Material:- Plastic, metal

12V DC Micro Low Speed Small Gear Motor with Shaft

Specification:-

• Voltage : 12 Volts
• Material : Metal
• Type : Gear Motor
• Construction : Permanent Magnet
• Color : silver  ‎

12V DC Copper Motor Multipurpose Brushed for DIY applications

Specifications:-

• Operating Voltage: 12V
• Maximum Current: 2A
• High Torque Rated Voltage Current-DC 12V
• 100% Brand New and High Quality
• Color as show on picture. 

14V 2AMP AC-DC Adaptor Power Supply for DC fan high speed charger

Specification:-

• Input voltage : 90V to 270V AC
• Output voltage : 14V
• Power rating : 2A
• Max. frequency range : 50 to 60 Hz
• Over-current, overload and short circuit protectiona
• High-quality adapter with the latest and advanced technology

DIY Robot Smart Car Kit with Speed Encoder, 2 Wheels and Battery Holder

Specification:-

• Material: Plastic
• This car is the tachometer encoder.
• It can be used for distance measurement, velocity.
• With a 4 AA battery holder
• The motor power supply is 3V ~ 6V

5V Mini Cylindrical Shape Small Shaft High Speed DC Motor

Specification:-

• Diameter  :  33mm
• Shaft diameter  :  2mm
• Shaft length  :  9mm
• Working voltage  :  5V
• Speed : 9200 RPM

W5500 Ethernet Network Modules for Arduinos

Specifications

• Type: Drive IC
• 3.3 V or 5 V level.
• LAN Ethernet: 10/100Mbps
• Module test: test software
• W5500 hardware initialization pen

L298N 1.5A 2V DC Motor Drive Controller Board PWM Speed H-Bridge Stepper Module

Specification

• Module supply voltage: DC 2V-10V
• Signal input voltage: DC 1.8-7V
• Single working current: 1.5A
• Peak current up to 2.5A
• Low standby current (less than 0.1uA)

Mini Electric Motor 16400 RPM High Speed Miniature DC Motors 1.5Vto 4.5V for Toy Cars Pack of 5

Specification:-

• Voltage: 1.5-4.5VDC
• No load RPM: 16400 rpm (Estimated)
• NO load current: 90mA
• Stall Current: 2.9A (3VDC)
• Frame: size130
• Shaft Length: 38mm
• Shaft dia: 2 mm

TYPE-C USB Charging 2-Step Light and Motor Dimming Controller Module

Specification

• Input charging: 5V current limiting 1A
• Button height: 6mm
• C-TYPE USB Charging
• Product size: 35mm x 28mm
• Aperture diameter: approximately 2.5mm
• 2 step dimming mode Function
• Battery Charging Indicator 
• Light and Motor Output Connection

4 channel DC LED chaser with adjustable speed (41mm x 28mm)

Specification:-

• Led chaser circuit with 4 LED outputs
• Variable frequency.
• Best for making electronic projects.
• Ideal for making LED dice projects.

Combo of 12V 555 DC Motor | Drill Chuck Kit | 12V 2 Amp Adapter | DC Female Jack

Specification:-

• Operating voltage: 9V to 12V
• No-load speed: 10000 RPM
• Motor shaft diameter: 6 mm
• 7 pcs of Electric drill chuck set
• Anti-rust and anti-corrosion properties

Package includes: 12V DC RS-555 Motor, Drill Chuck Kit, 12V 2 Ampere Adaptor, and DC Female Jack. 

PMLL4148L 100V MINI MELF High Speed Switching Diodes Pack of 5

Specification:-

• Package: SOD80C
• Mounting Type: SMD
• Part Number: PMLL4148L
• Max. forward voltage: 1V
• Max. forward impulse current: 4A
• Load current: 0.2A
• Max. load current: 0.45A
• Power dissipation: 0.5W

PMLL4148L 100V MINI MELF High Speed Switching Diodes Pack of 50

Specification:-

• Package: SOD80C
• Mounting Type: SMD
• Part Number: PMLL4148L
• Max. forward voltage: 1V
• Max. forward impulse current: 4A
• Load current: 0.2A
• Max. load current: 0.45A
• Power dissipation: 0.5W

PMLL4148L 100V MINI MELF High Speed Switching Diodes Pack of 2500

Specification:-

• Package: SOD80C
• Mounting Type: SMD
• Part Number: PMLL4148L
• Max. forward voltage: 1V
• Max. forward impulse current: 4A
• Load current: 0.2A
• Max. load current: 0.45A
• Power dissipation: 0.5W

Combo of SG90 Hard Plastic Gear Servo Motor & Multi Servo Tester Speed Control

Specification:-

• Digital Multi Servo Tester 
• Connect to up to 3 servos simultaneously
• SG90 Small digital servo motor
• Operating voltage:  3V to 7.2V
• Recommended voltage: 5V
• Stall torque : 1.2 kg/cm (4.8V)
• Max stall torque : 1.6 kg/cm (6V)
• The operating speed is 0.1s/60° (4.8V)

12V 8000 RPM High Speed Brushed DC Motor For RC Toys

Specifications:-

• Type: DC Motors
• Supply Voltage: DC 12V
• Speed: 8000 RPM
• Material: Stainless Steel Metal
• Compact and Lightweight

TC4420 6A High-Speed MOSFET Driver IC

Specification:-

• Supply Voltage: +20V
• Input Voltage: – 5V to VDD + 0.3V
• Input Current (VIN > VDD): 50 mA
• High Capacitive Load Drive Capability: 10,000 pF
• Wide Input Supply Voltage Operating Range: – 4.5V to 18V
• Package Power Dissipation 5-Pin TO-220 (With Heatsink): 12.5W
• Output Voltage Swing to Within 25 mV of Ground or VDD
• Thermal Impedances (To Case) 5-Pin TO-220: 10°C/W

Combo of DC Motor Speed Controller & DC Motor Speed Controller Speed Switch Module

Specification:-

• Voltage: DC 6-28 V.
• Wattage: 80W
• For Speed Control Of all Types of DC Brush Motors
• Current: 3A
• PWM Technology: Ensures smooth and efficient motor speed regulation.
• Adjustable Speed Control: Provides precise control over the motor speed with easy-to-use adjustment mechanisms.

RJ45 Cat6 Ethernet Patch LAN Network Cable (6 Inch, Grey) | Pack of 20

Specification:-

• Cable Type: Ethernet Patch LAN Network Cable
• Category: Cat6
• Connector Type: RJ45
• EIA/TIA TSB-40A ETL Verified
• Cable Length: 6 Inch

RJ45 Cat6 Ethernet Patch LAN Network Cable (6 Inch, Grey) | Pack of 50

Specification:-

• Cable Type: Ethernet Patch LAN Network Cable
• Category: Cat6
• Connector Type: RJ45
• EIA/TIA TSB-40A ETL Verified
• Cable Length: 6 Inch

12V Electric Motor Gear Box for Kids Ride-On Cars | 17000RPM High Speed Replacement Motor | Wear Resistant Gearbox for Toy Vehicles

Specification:-

• Voltage: 12V
• Speed: 17000RPM
• Motor Type: DC Gear Motor
• Material: High Quality Durable Material
• Gear Type: Reduction Gearbox

DSN-VC288 Voltmeter Ammeter

Specifications:-

1. Voltage Range: 0-100V DC
2. Voltage Accuracy: Typically ±1%
3. Current Range: 0-10A DC
4. Dual LED digital display for simultaneous voltage and current readings.
5. Resolution: Typically 0.01V for voltage and 0.01A for current.

12V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.