24V 4 channel relay module with light coupling

Specification:-

1. Number of channels: 4
2. Operating voltage: 24V
3. Max. current: 30mA
4. Trigger voltage: 24V
5. Switching voltage: 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

24V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 24V
3. Max. current : 30mA
4. Trigger voltage : 24V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

24V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 8
2. Operating voltage : 24V
3. Max. current : 30mA
4. Trigger voltage : 24V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

SSR-25DA 3V-32V DC to 24V-380V AC 25A Solid state relay module pack of 1pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 380V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

SSR-25DA 3V-32V DC to 24V-380V AC 25A Solid state relay module pack of 5pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 380V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

SSR-25DA 3V-32V DC to 24V-380V AC 25A Solid state relay modules pack of 10pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 380V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

HW-302 XH-M139 2.1 channel digital power amplifier board 12V to 24V wide voltage TPA3116D2 module

Specification

1. Operating voltage : 12V to 24V
2. Power rating : 2*50W + 100W
3. Output load : 4Ω to 8Ω
4. Frequency range : 14KHz to 100KHz
5. Operating frequency : 1.2MHz
6. Number of channels : 3 channels(Left channel + Right channel + Subwoofer)

10-24V TPA3116D2 3-Channel TPA3116D2 Chip Wireless Amplifier Board

Specification:-

• Chip type: TPA3116D2
• Voltage: 10-24 Volts
• Mounting Type: Surface Mount
• Number of Channels: 3
• Compatible Device: Speaker
• Frequency Response Range: 20Hz-20KHz

12V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 1 channel relay module compatible with 5V microcontroller

Specification:-

1. Number of channels: 1
2. Supply voltage: 3.75V to 6V
3. Quiescent current: 2mA
4. Trigger voltage: 5V
5. Trigger current: 20mA
6. Current when the relay is active: 70mA
7. Relay maximum contact voltage: 250V AC or 30V DC
8. Relay maximum current:  10A

12V 2 channel relay module with light coupling

Specification:-

1. Number of channels : 2
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

16 x 4 Blue/White color LCD display module (JHD539M9)

Specifications

1. Color of display: Blue
2. Color of character: White
3. Size : 16 x 4 (16 character x 4 rows)
4. Power supply : +5V
5. Operating current : 1.65mA
6. Board dimensions  :  88mm x 60mm (LxB)
7. Display dimensions   :   62mm x 26mm (LxB)

GD4142 Dual USB 5V 1A DC to DC step up booster power bank charging module pack of 1pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on the back
6. Intelligent automatic shutdown

5V 1 channel Low level solid state relay module 240V 2A output with resistive fuse

Specification:-

1. Operating voltage : 3V to 5V
2. Trigger voltage : 5V
3. Supply current : 2mA
4. Switching voltage range : 240V at 2A
5. Operating current : 12.5mA

5V 2 channel Low level solid state relay module 240V 2A output with resistive fuse

Specification:-

1. Operating voltage : 3V to 5V
2. Trigger voltage : 5V
3. Supply current : 2mA
4. Switching voltage range : 240V at 2A
5. Operating current : 16mA
6. 2 channel 2 AMP Solid State Relay board
7. Control 2 loads of up to 2 amps each at 100V or 240V AC

5V 4 channel Low level solid state relay module 240V 2A output with resistive fuse

Specification:-

1. Operating voltage : 3V to 5V
2. Trigger voltage : 5V
3. Supply current : 2mA
4. Switching voltage range : 240V at 2A
5. Operating current : 12.5mA
6. 4 channel 2 AMP Solid State Relay board

5V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 2 channel relay module with light coupling

Specification:-

1. Number of channels : 2
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 4 channel relay module with light coupling

Specification:-

1. Number of channels : 4
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 6 channel relay module with light coupling

Specification:-

1. Number of channels : 6
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 4 channel relay module with light coupling

Specification:-

1. Number of channels : 4
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 8
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 16 channel relay module with light coupling and LM2576 power supply

Specification:-

1. Number of channel : 16
2. Operating voltage : 12V
3. Trigger voltage : 12V
4. Switching voltage : 250V at 10A
5. 12V relay with AC contact capacity of 10A 250V and optocoupler protection
6. The onboard power supply module

12V 4 Channel relay module programmable with opto isolated RS485 STM8S103F3

Specification:-

1. Number of channels : 4
2. Operating voltage : 12V
3. Max. current : 20mA
4. 4 Optocoupler isolation
5. 4 relay closed LED indicating lamp
6. 4 input connections
7. RS485 communication connection
8. STM8S103F3 programmable microcontroller

Made in India 5 Volt Single channel isolated relay module

Specification:-

1. Made in India
2. Number of channels : 1
3. Supply voltage : 5 Volts
4. Current when the relay is active : 7A
5. Relay maximum contact voltage : 250V AC or 28V DC
6. Relay Maximum current :  10A

DC 6V to 30V 1 Channel Delay power relay module with Adjustable timing cycle

Specification:-

1. Number of channels : 1
2. Operating voltage : 6V to 30V DC
3. Max. current : 50mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Optocoupler Isolation

ESP8266 5V 1 Channel relay module IOT smart home remote control switch

Specifications:-

1. Transmission Distance (m) : 40m
2. Trigger voltage: 5V DC
3. Switching voltage: 250V @ 10A
4. Switching voltage: 30V @ 10A
5. Relay voltage : 5V (10A/250V AC, 10A/30V DC)
6. Baud rate: 9600

12V DC 250V AC 16A 6 Terminal NO HF115F-I/012-1HS3A Switching current PCB panel mount power relay pack of 1pcs

Specifications

1. Rated voltage : 250V AC
2. Max. switching voltage : 400V AC
3. Rated current : 16A
4. Limiting continuous current : 12A
5. Operate/release time max. : 8/6ms

Single Channel 5V Relay Module low level trigger

Specification

1. Number of channels : 1
2. Operating voltage : 5V
3. Trigger voltage : 10V
4. Switching voltage : 250V at 10A
5. Equipped with high-current relay
6. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V DC 100 Watt Inverter Circuit Board with Relay and Buzzer (110mm x 60mm x 2mm)

Specification

• Input voltage: 12V DC
• Power rating: 100 Watt
• Frequency : 50HZ/60HZ
• Inbuilt over voltage, over current, and short circuit protection
• Simple and easy-to-use design
• Fast transient response
• Dimension: 110 x 60 x 2 mm
• It's capable of operating CFL bulbs, LED bulbs, bulb, Light Charger, etc.
• It's not capable of electromagnetic transformer devices

RF Transmitter 433 Mhz Remote Controls with Wireless Remote Control Switch DC 12V

Specifications:-

• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes, and off.
• 3 mode function : Momentary, Toggle, Latching Mode have inside

DC 12V RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

15A 125/250V 50/60Hz DC Automatic Reset Relay Fuse Current Overload Protector

Specifications:-

• Current Rating: 15A
• Voltage: 12V
• High-Amperage Compatibility
• Reliable Relay Fuse Design
• Simple Installation

DC 12V NE555 Timer Switch Adjustable Disconnect Delay Relay Module

Specification:-

• Module based on the NE555 chip.
• Input voltage: DC 12V
• Adjustable time: 0–10 s
• AC Control voltage: 250V/max. 10A
• DC Control Voltage: 30V/max. 10A
• Max. load: 2200W

Combo of 37 in 1 Ultimate Sensor Kit for Arduino

Specification:-

• 10K resistor Rotary encoder module
• Hall effect detection sensor (easily available)
• Joystick sensor Input voltage range: 3.3V to 5V
• Suitable for Arduino, AVR, and PIC microcontroller projects
• The sensor module kit is perfect for various DIY projects and robotics science projects
• The Arduino sensor kit can be used by both beginners and professionals.
• This is a great sensor kit for getting started with microcontrollers and sensors.

Package includes:- Joystick module, Relay module, Big sound, Small sound, Tracking, Avoid, Flame, Linear hall, Touch, Digital temp, Buzzer, Passive buzzer, RGB led, SMD led, Two color, Two color, Reed switch, Mini reed, Heartbeat, 7-color flash, Laser emit, Button, Shock, Rotary encoders, Light cup, Tilt switch, Ball switch, Photoresistor, Temp and humidlty, Analog hall, Hall magnetic, TEMP 18B20, Analog temp, TR emission, IR receiver, Tap module, and Light blocking Sensors. 

Combo of Timer Relay Module (6V–30V DC) with Adjustable Delay | 6 RPM 220V AC Swing Motor

Specification:-

• Operation Mode: Automatic
• Contact Current Rating: 10 Amps
• 220-240V Swing Motor Gear Motor
• 1 Channel Delay power relay module
• Clear LED display, easy to check the value

DC 12V 1 Channel RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Voltage: DC12V
• Current Rating: 10 Amps
• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

4 Channel Wireless Four Button RF Remote Control Receiver Module

Specifications:-

• Receiver operating voltage: DC 5V.
• Operating mode: Non-Locking
• Transmitter Operating voltage: DC 12V
• Transmission distance (m): 3 to 5
• Easy Integration

10A 125/250V 50/60Hz DC Automatic Reset Relay Fuse Current Overload Protector

Specifications:-

• Current Rating: 10A
• Voltage: 12V
• High-Amperage Compatibility
• Reliable Relay Fuse Design
• Simple Installation

5V 30A 1-Channel Relay Module

Specification:-

• Relay Type: Single channel
• Operating Voltage: 5V DC
• Current Rating: 30 Amps
• Current Capacity: 30A at 250V AC or 30V DC

Pinouts:

• DC+: DC power supply positive pole
• DC-: DC power supply negative pole
• IN: signal triggering pin
• JD+: relay control voltage positive
• JD-: relay control voltage negative

100 Watt Mother Board/PCB of Inverter with Relay Module

Specification:-

• Power Rating: 100 Watts
• Power Source: DC
• Input Voltage: 12V DC (typical)
• Relay: High-current relay for reliable switching
• Dimensions: 105mm x 93mm (approx)

DC 12V Dual Channel Transmitter RF Relay Module with Remote Controller

Specification:-

• Channels: 2
• Voltage: DC12V
• Current Rating: 10 Amps
• Working frequency: 433MHz/315MHz
• Working temperature: -30°c+70°c
• Material: Plastic + Metal

5V 1 Channel Relay Module with High & Low Trigger Option

Specification:-

• Number of channels: 1
• Supply voltage: 3.75V to 5V
• Quiescent current: 2mA
• Trigger voltage: 5V
• Trigger current: 20mA
• Current when the relay is active: 70mA
• Relay maximum contact voltage: 250V AC or 30V DC
• Relay maximum current:  10A
• Product size: 50 x 25mm

DC 12V 2 Channel Transmitter RF Relay Module with Wireless Remote Control Switch

Specification:-

• Voltage: DC12V
• Channels: 2
• Current Rating: 10 Amps
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Control Lights, Motors, Fans, electrically operated.
• Push the remote button, LED flashes on and off.

DIY Combo Kit for Automatic Hand Sanitizer Dispenser | Includes IR Sensor | Relay | Water Pump

Specification:-

• Type: male to male
• 5V 1-channel relay module 
• IR Proximity Sensor
• 2.5mm x 100mm Black cable tie 
• 6V to 12V DC Mini underwater pump

Package Included:- 2 pcs Cable tie, 20 pcs Jumper Wire, 1 pcs Relay Module, 1 pcs IR Sensor, 1 pcs Underwater pump, 2 meter Pipe

Combo of LM393 LDR Sensor Module with 5V 1 Channel Relay & Jumper Wire (12 Item)

Specification:-

• Operating voltage : 3.3V-5V
• Power indicator : Red
• Digital switch output indicator : Green
• Number of channels: 1
• Quiescent current: 2mA
• Trigger current: 20mA
• Relay maximum current:  10A

Package Included:-  1 Pcs 5V Relay Module, 1 Pcs LDR Sensor Modulem, 10 Pcs Female to Female Jumper wire

Combo of Rain Detect Sensor for School Project with Jumper Wire|Water Pump & 5V Relay Module (43 Item)

Specification:-

• Working voltage: 6V to 12V
• Power current: 1.9A
• Max. flow : 50 liter/hour
• Distribution bit to adjust sensitivity
• 5V Relay Module – Enables seamless control of electrical devices based on sensor input.

Package Included:- 1 pcs 5V Relay Module, 1 pcs water pump, 1 pcs Rain detect Sensor, 40 pcs Female to Female Jumpere wire

Combo of LM393 LDR Sensor with 12V 2- Channel Relay Module & 40 Pcs Jumer wire (47 Item)

Specification:-

• Number of channels : 2
• Operating voltage : 12V
• Max. current : 20mA
• 40 Jumper Wires – Provides the necessary connections for easy circuit assembly.
• LM393 LDR Sensor – Detects light levels and triggers responses based on light intensity.

Package Included:- 2 Pcs 9V battery, 2 Pcs battery clip connector, 1 Pcs LDR Sensor Module, 1 Pcs 5V Buzzer, 1 Pcs 12V Relay Module, 40 Pcs Female to Female Jumper wire

DC12V 315MHz 4-CH RF Wireless Relay Module with Remote Controller (White)

Specification:

• Frequency: 315MHz RF
• Operating Voltage (Relay): DC 12V
• Standby Current: 10mA
• Remote Distance: 20-200m
• Relay Channels: 4CH (4 independent relays)
• Remote Control: Approx. 6.8 x 3.8 x 1.5cm/2.7 x 1.5 x 0.6 inch
• Remote Switch : Approx. 7.5 x 5.5 x 2.6cm/3 x 2.2 x 1 inch

1 Channel 12V Relay Module with Optocoupler Isolation, High/Low Level Trigger Pack of 1

Specification:-

• Number of Channels: 1
• Operating Voltage: 12 V DC
• Trigger Voltage: 3.3 V–5 V DC (High/Low Level Trigger)
• Maximum Switching Voltage: 250 V AC / 30 V DC
• Maximum Switching Current: 30 A
• Relay Type: High Current Relay
• Application: Suitable for Home Automation, Arduino, Raspberry Pi, PLC, MCU, and DIY Electronics Projects

24V 7A Sugar cube relay 5 pin pack of 2pcs

Specifications

1. Trigger voltage : 24V
2. Nominal current : 15mA
3. Maximum AC load current : 10A
4. Maximum DC load current : 10A
5. Maximum switching : 300 operating/minute
6. Compact 5-pin configuration

24V 7A Sugar cube relays 5 pin pack of 10pcs

Specifications

1. Trigger voltage : 24V
2. Nominal current : 15mA
3. Maximum AC load current : 10A
4. Maximum DC load current : 10A
5. Maximum switching : 300 operating/minute
6. Compact 5-pin configuration

24V 7A Sugar cube relays 5 pins pack of 100pcs

Specifications

1. Trigger voltage : 24V
2. Nominal current : 15mA
3. Maximum AC load current : 10A
4. Maximum DC load current : 10A
5. Maximum switching : 300 operating/minute
6. Compact 5-pin configuration

120V AC to 24V DC 2A 6 Terminal LT2S-12VDC-T Subminiature DPDT PCB panel mount power relay pack of 1pcs

Specifications

1. Operating voltage : 12V to 24V DC
2. Maximum voltage : 120V AC
3. Max. operating voltage : 2A
4. Supply current : 0.2A
5. 2 Form C configuration.
6. Bifurcated contacts.
7. Epoxy-sealed.

120V AC to 24V DC 2A 6 Terminal LT2S-12VDC-T Subminiature DPDT PCB panel mount power relay pack of 5pcs

Specifications

1. Operating voltage : 12V to 24V DC
2. Maximum voltage : 120V AC
3. Max. operating voltage : 2A
4. Supply current : 0.2A
5. 2 Form C configuration.
6. Bifurcated contacts.
7. Epoxy-sealed.

120V AC to 24V DC 2A 6 Terminal LT2S-12VDC-T Subminiature DPDT PCB panel mount power relays pack of 10pcs

Specifications

1. Operating voltage : 12V to 24V DC
2. Maximum voltage : 120V AC
3. Max. operating voltage : 2A
4. Supply current : 0.2A
5. 2 Form C configuration.
6. Bifurcated contacts.
7. Epoxy-sealed.

EF29-2C-L-24V 2A DPDT 8-Pin Telecom Relay Pack of 1

Specification:-

• Model : EF29-2C-L-DC-12V
• Relay Configuration: DPDT
• Number of Pins: 8
• Mounting Type: PCB
• Coil Voltage Rating: 24VDV
• Current Rating: 2A
• Contact Capacity: 1A~120V AC
• Dimensions: 20mm x 9.5mm x 10.5mm (approx)

EF29-2C-L-24V 2A DPDT 8-Pin Telecom Relay Pack of 5

Specification:-

• Model : EF29 2C L DC 12V
• Relay Configuration: DPDT
• Number of Pins: 8
• Mounting Type: PCB
• Coil Voltage Rating: 24VDV
• Current Rating: 2A
• Contact Capacity: 1A~120V AC
• Dimensions: 20mm x 9.5mm x 10.5mm (approx)

EF29-2C-L-24V 2A DPDT 8-Pin Telecom Relay Pack of 10

Specification:-

• Model : EF29 2C L DC 12V
• Relay Configuration: DPDT
• Number of Pins: 8
• Mounting Type: PCB
• Coil Voltage Rating: 24VDV
• Current Rating: 2A
• Contact Capacity: 1A~120V AC
• Dimensions: 20mm x 9.5mm x 10.5mm (approx)

BA24W-K Signal Relay DPDT 24V 2A Through Hole 8-Pin

Specification:-

• Package: DIP 8-Pin
• Rating (resistive): 0.5 A 125 VAC or 1 A 30 VDC
• Maximum Carrying Current: 2A
• Maximum Switching Power: 62.5 AV, 30 W
• Maximum Switching Voltage: 250 VAC, 220 VDC
• Maximum Switching Current: 2A
• Minimum Switching Load: 0.01 mA 10 mVDC
• Relay Contact Form: 2 Form C (DPDT-NO, NC) 

DIR-S4-124A SPST 24V 1A Through Hole 4-Pin Reed Relay

Specification:-

• Package: DIP 4-Pin
• Type: SPST (Single Pole Single Throw) reed relay
• Coil Operate Voltage(DC): 18 V
• Coil Release Voltage(DC): 2 V
• Coil Resistance: 2150 Ω
• Coil Voltage(DC)-Max: 32 V
• Coil Voltage-Nom: 24 V
• Coil/Input Supply Type: DC
• Contact Current(DC)-Max: 0.5 A

RW-SH 124D 24V 6A Through Hole T73 SPDT 5-Pin Sugarcube Relay

Specification:-

• Package: DIP 5-Pin
• Type: SPDT (Single Pole Double Throw) relay
• Contact current max.: 15A
• Rated coil voltage: 24V DC
• Temperature Range : -30～55°C
• Humidity Range : 45～85% RH.
• Coil Temperature Rise : 35°C Max.

HRG90-S-DC 24V T-Type 6-Pin 20A/30A SPDT Through Hole Relay

Specification:-

• Package: DIP 6-Pin
• Rating voltage: 24V
• Normal open current: 30mA
• Normal close current: 20mA
• Maximum switching: 300 operating/minute
• Compact 6-pin configuration

H93-S-DC 24V 20A/30A Through Hole 5-Pin Box Type SPDT Relay

Specification:-

• Package: DIP 5-Pin
• Rating voltage: 24V
• Normal open current: 30mA
• Normal close current: 20mA
• Maximum switching: 300 operating/minute
• Compact 6-pin configuration

HF115F/024-2HS4 24V 8A Through Hole 6-Pin DPST Miniature High Power Relay

Specification:-

• Package: DIP 6-Pin
• Mounting : PCB-THT
• Coil voltage: 24V DC
• Contact Rating: 8A 
• Rated voltage(V) : 250VAC
• Contact arrangement : 2 Form A
• Contact Configuration: DPST (Double Pole Single Throw)

HF115F/024-2HS4B 24V 8A Through Hole 6-Pin DPST Miniature High Power Relay

Specification:-

• Package: DIP 6-Pin
• Mounting: PCB-THT
• Coil voltage: 24V DC
• Contact Rating: 8A 
• Rated voltage (V): 250 VAC
• Contact arrangement: 2 Form A
• Contact Configuration: DPST (Double Pole Single Throw)

JQX-115F-TH-024-1ZS3A Through Hole 24V 10A 8-Pin SPDT Miniature High Power Relay

Specification:-

• Package: DIP 8-Pin
• Coil voltage: 24V DC
• Contact Rating: 10A 
• Contact arrangement : 1 Form C
• Color : White
• Contact Configuration: SPDT (Single Pole Double Throw)

HF115F/024-1ZS3Through Hole 24V 16A 8-Pin SPDT Miniature High Power Relay

Specification:-

• Package: DIP 8-Pin
• Coil voltage: 24V DC
• Contact Rating: 16A 
• Contact arrangement : 1 Form C
• Contact Configuration: SPDT (Single Pole Double Throw)

HF13F/024-2Z5(016) Through Hole 24V 10A 8-Pin DPDT Miniature Intermediate Relay

Specification:-

• Package: DIP 8-Pin
• Coil voltage: 24V DC
• Contact Rating: 10A 
• Coil Power: 0.4W
• Contact arrangement: 2 Form C
• Contact Configuration: DPDT (Double Pole Double Throw)

HF118F/024-1D6 Through Hole 24V 10A 4-Pin SPST (1 Form A) Miniature Power Relay

Specification:-

• Package: DIP 4-Pin
• Mounting Type PCB Mount
• Coil voltage: 24V DC
• Contact Rating: 10A 
• Contact arrangement: 1 Form A
• Contact Configuration: SPST (Single Pole Single Throw)

HF49FD/024-1H22GFL Through Hole 4-Pin 24V 5A SPST Miniature Power Relay

Specification:-

• Package: DIP 4-Pin
• Coil Voltage: 24VDC
• Switching Current: 5A
• Switching Voltage: 250V AC
• Switching Voltage: 30VDC
• Contact arrangement: 1 Form A
• Contact Configuration: SPST (Single Pole Single Throw)

HF49FD/024-1H12F Through Hole 4-Pin 24V 5A SPST Miniature Power Relay

Specification:-

• Package: DIP 4-Pin
• Coil Voltage: 24VDC
• Switching Current: 5A
• Switching Voltage: 250V AC
• Switching Voltage: 30VDC
• Contact arrangement: 1 Form A
• Contact Configuration: SPST (Single Pole Single Throw)

HF68F/024-1HSB Through Hole 4-Pin 24V 8A SPST Miniature Power Relay

Specification:-

• Package: DIP 4-Pin
• Coil Voltage: 24VDC
• Switching Current: 8A
• Max Switching Voltage: 120V DC
• Max Switching Voltage: 240V AC
• Contact arrangement: 1 Form A
• Contact Configuration: SPST (Single Pole Single Throw)

HF49FD/024-1H12F Through Hole 4-Pin 24V 5A SPST Miniature Power Relay With Relay Socket

Specification:-

• Package: DIP 4-Pin
• Coil Voltage: 24V DC
• Switching Current: 5A
• Coil Consumed Power : 450mW
• Contact arrangement: 1 Form A
• Contact Configuration: SPST (Single Pole Single Throw)

HFD3/24-S1R Surface Mount 8-Pin 24V 2A DPDT Signal Relay

Specification:-

• Package: SMD 8-PIN
• Rated coil voltage: 12V DC
• Contact current max: 2A
• AC contacts rating: 0.5A / 125V AC
• DC contacts rating: 2A / 30V DC
• Switched voltage: max. 220V DC, max. 250V AC
• Contacts configuration: DPDT
• Coil power consumption: 140mW
• Operating temperature: -40°C to 85°C

HFD3/24-L1SR(131) Surface Mount 8-Pin 24V 2A DPDT Signal Latching Relay

Specification:-

• Package: SMD 8-PIN
• Rated coil voltage: 12V DC
• Contact current max: 2A
• AC contacts rating: 0.5A / 125V AC
• DC contacts rating: 2A / 30V DC
• Switched voltage: max. 220V DC, max. 250V AC
• Contacts configuration: DPDT
• Coil power consumption: 140mW
• Operating temperature: -40°C to 85°C

HFS32D/24D-24D3M-N Through Hole 4-Pin SPST 24V DC 100mA Solid State Relay

Specification:-

• Package: DIP 4-Pin
• Input Current: 100 mA
• Output Voltage: 24V DC
• Configuration: SPST (Single Pole Single Throw)
• Low Power Consumption

HFS32D/24D-48D0R1T-N Through Hole 4-Pin SPST Input 24V DC Output 48V DC 100mA Solid State Relay

Specification:-

• Package: DIP 4-Pin
• Input Current: 100mA
• Input Voltage: 24V DC
• Output Voltage: 48V DC
• Contact arrangement: 1 Form A
• Configuration: SPST (Single Pole Single Throw)

JQC3FF-24VDC-1ZTS Through Hole 5-Pin 18V 10A SPDT Sugarcube Relay

Specification:-

• Package: DIP 5-Pin
• Control Voltage: 18V DC
• Load Current Capacity: Up to 10A
• Contact arrangement: 1 Form A
• Maximum Switching Power: 2770VA / 210W
• Contact Configuration: SPDT (Single Pole Double Throw)

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier module pack of 1pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power  :  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 50pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

TCRT5000 Dual Channel Line Tracking sensor module

Specifications:-

1. Module model : TCRT5000
2. Working voltage : DC 3.5V to 5V
3. Output channel : 0/1
4. Detect distance : 1-25mm
5. Focal distance : 2.5mm
6. IC name : LM393
7. Inbuilt indicator light
8. Also, built in potentiometer for sensitivity

PAM8403 - GF1002 3W+3W Dual channel audio amplifier boards with switch potentiometer pack of 50pcs

Specification:

• New and branded quality product
• Dual channel
• Power output:  3W+3W
• Operating voltage:  2.5V to 5.5V
• Recommended voltage:  5V
• Excellent sound quality
• On-board switch potentiometer

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 10pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 50pcs

Specification

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power  :  10W+10W
4. Chip name  :  PAM8610
5. Efficiency  :  90%
6.  Frequency response  :  20Hz to 50KHz

IRF540 100V 33A N-channel HEXFET Power Mosfet

Specifications

1. Type : Small signal N-Channel MOSFET
2. Continuous drain current : 33A at 25°C
3. Pulsed drain current : 110A
4. Minimum gate threshold voltage : 2V
5. The maximum gate threshold voltage : 4V
6. Gate source voltage : ±20V
7. Maximum drain-source voltage : 100V

IRFI630A 200V 9A N-channel Power Mosfet

Specifications

1. Type : N - channel
2. Drain-to-Source breakdown voltage : 200 V
3. Gate-to-Source voltage, max : ±20 V
4. Drain-source On-state resistance, max : 0.400 Ohm
5. Continuous drain current : 9A
6. Total gate charge : 43 nC
7. Power dissipation : 74 W

IRF840 500V 8A N-channel Power Mosfet

Specification:-

1. N-Channel Power MOSFET
2. Continuous drain current : 8A
3. Gate threshold voltage : 10V (limit = ±20V)
4. Drain to source breakdown voltage: 500V
5. Drain source resistance : 0.85 Ohms
6. Rise time and fall time : 23nS and 20nS

IRF520 100V 9.2A N-channel Power Mosfet

Specifications

1. Type: N-Channel
2. Drain-Source Volt (Vds) : 100V
3. Drain-Gate Volt (Vdg) : 100V
4. Gate-Source Volt (Vgs) : 20V
5. Drain Current (Id) : 10A
6. Power Dissipation (Ptot): 70W

TPA3110 2x15W Dual channel stereo audio power amplifier modules pack of 50pcs

Specification

1. Operating voltage:  8V to 18V
2. Output Power:  15W+15W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Signal to noise ratio  :  100DB
7. Supply current  :  more than 3A

PAM8406 5Wx2 dual channel stereo Mini digital amplifier modules with volume control preset pack of 50pcs

Specification

1. Working voltage:  5V
2. Output power:  5W+5W
3. Dual channel stereo
4. High sound quality
5. Excellent noise suppression system
6. Can drive 4 and 8 omega speakers easily
7. Left and Right volume controller