433MHz RF Transmitter and Receiver Wireless Module Kit

Specification:-

RF ASK Transmitter

• Frequency Range: 433.92 MHz
• Supply Voltage : 3V ~ 12V
• Output Power: 4 ~ 12 dBm
• Standard Operating Voltage: 5V

RF ASK Receiver

• Receiver Frequency: 433.92 MHz
• Typical Sensitivity: 105 dBm
• Supply Voltage : 3V ~ 12V
• Supply Current: 3.5 mA
• Standard Operating Voltage: 5V

RF Transmitter 433 Mhz Remote Controls with Wireless Remote Control Switch DC 12V

Specifications:-

• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes, and off.
• 3 mode function : Momentary, Toggle, Latching Mode have inside

RF Transmitter 433 Mhz Remote Controls with Wireless Remote Control Switch AC 220V / 30A / 18-10AWG

Specifications:-

• Operating voltage: AC 220V – 300V
• Switch Type: Remote Control
• Material: plastic and metal.
• Wiring type: fixed terminal.
• Control lights, motors, and fans are electrically operated.
• Push the remote button, and the LED flashes on and off.

433Mhz RF Wireless Transmitter and Receiver Module for Arduino

Specification:-

Receiver Module

• Operating voltage: DC5V
• Quiescent Current: 4MA
• Receiving frequency: 433.92MHZ
• Receiver sensitivity: -105DB

Transmitter Module

• Operating voltage: 3.5-12V
• Transmitting frequency: 433M
• Pinout from left-right: (DATA; VCC; GND)

433Mhz RF Transmitter | DC 12V 1CH Remote Control | 5 Universal Wireless Remote Control Switches

Specification:-

• Wireless control and easy to install.
• Control Lights, Motors, and fans electrically.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes, and off.
• 3 mode function : Momentary, Toggle, Latching Mode have inside

433MHz 4-CH ABCD RF Remote Control | Universal Wireless Transmitter for Smart Door System

Specification:-

• Frequency: 433MHz
• Channel: 4 (A, B, C, D)
• Control Mode: RF Wireless Transmitter
• Range: Up to 50–100 meters (open area)
• Power Supply: Button cell battery (included)
• Material: ABS plastic + metal keychain hook
• Dimensions: Compact pocket size
• Weight: Lightweight and portable
• Compatibility: Works with all standard 433MHz receivers
• Compatible Devices: Garage and Smart Door

433MHz 4CH Wireless RF Remote Control Switch DC 12V Relay | Transmitter & Receiver

Specification:-

• Frequency: 433 MHz
• Channels: 4CH (relay outputs)
• Operating Voltage (Relay): DC 12V
• Range: Up to 100m (open area)
• Transmitter Power Supply: 12V A23 battery
• Operating Temperature: -10°C to +60°C
• Material: ABS housing (remote) + FR4 PCB (receiver)
• Relay Contact Capacity: 10A/250VAC or 10A/30VDC (typical)

3.7V/12V Remote Relay 1-CH 433MHz Manual Switch | Wireless RF Latching Switch | 12V Transmitter and Receiver

Specification:

• Operating Voltage (Receiver): DC 3.7V–12V
• Relay Output: 1 Channel
• Frequency: 433MHz RF
• Working Modes: Toggle / Momentary / Latching (programmable)
• Control Range: 50–100m (open area)
• Transmitter Battery: 12V A23 battery (typical)
• Receiver Size: Compact, space-saving module
• Pairing System: Learning code (secure, easy setup)

315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module

Application of transmitter:

1. Wireless calling system,
2. Burglar alarm,
3. Wireless data transmission,
4. Automated data acquisition system

Application of receiver:

1. Wireless remote control switch,
2. Remote control socket,
3. Data transmission,
4. Remote control toys,
5. Anti-theft alarm host

433MHz 1 Channel RF Remote 500m Long Range Wireless Remote Control

Specification:-

• Signal Transmission: RF Remote Control
• Frequency: 433MHZ
• Transmission Distance: 500m
• Material: Plastic + Metal.
• Size: 92mm*40mm*12mm
• Control Lights, Motors, and fans are electrically operated.

433MHz 4-Button RF Wireless Remote Control | EV1527 Learning Code | ABS Remote

Specification:-

• Frequency: 433 MHz
• Channel: 4 (A, B, C, D)
• Control Mode: RF Wireless Transmitter
• Range: Up to 30–100 meters (open area)
• Material: ABS plastic + metal keychain hook
• Dimensions: Compact pocket size
• Weight: Lightweight and portable
• Compatibility: Works with all standard 433MHz receivers
• Compatible Devices: Drone, Fan, Garage Door, Home Theater, Streaming Device

433MHz RF Wireless 4CH Remote | EV1527 Learning Code | DC 12V Transmission Code Remote

Specification:-

• Frequency: 433 MHz
• Channel: 4 Channel (4CH)
• Encoding Chip: EV1527 learning code
• Power Supply: DC 12V (A23 battery)
• Material: ABS plastic + metal keychain hook
• Dimensions: Compact pocket size
• Weight: Lightweight and portable
• Compatible Devices: Garage Door

DC 12V RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

DC 12V 1 Channel RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Voltage: DC12V
• Current Rating: 10 Amps
• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

DC 12V Dual Channel Transmitter RF Relay Module with Remote Controller

Specification:-

• Channels: 2
• Voltage: DC12V
• Current Rating: 10 Amps
• Working frequency: 433MHz/315MHz
• Working temperature: -30°c+70°c
• Material: Plastic + Metal

DC 12V 2 Channel Transmitter RF Relay Module with Wireless Remote Control Switch

Specification:-

• Voltage: DC12V
• Channels: 2
• Current Rating: 10 Amps
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Control Lights, Motors, Fans, electrically operated.
• Push the remote button, LED flashes on and off.

RC522 RFID Card Reader Module 13.56MHz

Specification:-

• Working Current @ 3.3V: 13 – 26mA
• Standby Current @ 3.3V: 10 – 13mA
• Sleep Current: <80μA
• Peak Current: <30mA
• Working Frequency: 13.56MHz
• Card Reading Distance: 0-60mm
• Communication Protocol: SPI
• Data Communication Speed: 10Mbit/s Max

13.56MHz RFID Keychain Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency:  13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Blue
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Keychain Pack of 10

Specification:-

• Range: 0-10 cm
• Frequency:  13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Blue
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

MMBT3904-7-F Bipolar 300MHz Surface Mount NPN Transistor SOT-23-3

Specification:-

• Package: SOT-23-3 / TO-236-3 / SC-59
• No. of Pins: 3Pins
• Transistor Mounting: Surface Mount
• Collector Emitter Voltage Max: 40V
• Continuous Collector Current: 200mA
• Power Dissipation: 250mW
• Transition Frequency: 300MHz

MMBT4126-7-F Bipolar 250MHz Surface Mount PNP Transistor SOT-23-3

Specification:-

• Package: SOT-23-3 / TO-236-3 / SC-59
• No. of Pins: 3Pins
• Transistor Mounting: Surface Mount
• Continuous Collector Current: 200mA
• Power Dissipation: 250mW
• Transition Frequency: 300MHz

MMBT3906-7-F Bipolar 250MHz Surface Mount PNP Transistor SOT-23-3

Specification:-

• Package: SOT-23-3 / TO-236-3 / SC-59
• No. of Pins: 3Pins
• Transistor Mounting: Surface Mount
• Continuous Collector Current: 200mA
• Power Dissipation: 250mW
• Transition Frequency: 300MHz

PZT3904 40V 200mA 300MHz 1W Surface Mount Bipolar Transistor NPN SOT-223-4 (3 Leads + Tab)

Specification:-

• Package/Case: SOT-223-4 (3 Leads + Tab) / TO-261-4 / TO-261AA
• Mounting Style: SMD/SMT
• Transistor Polarity: NPN
• Maximum DC Collector Current: 200 mA
• Collector- Emitter Voltage Max: 40V
• Collector- Base Voltage: 60V
• Emitter- Base Voltage: 6V
• Pd - Power Dissipation: 10W

PZT3906 40V 200 mA 250MHz 1W Surface Mount PNP Bipolar Transistor SOT-223-4 (3 Leads + Tab)

Specification:-

• Package/Case: SOT-223-4 (3 Leads + Tab) / TO-261-4 / TO-261AA
• Type of transistor: PNP
• Polarisation: Bipolar
• Maximum DC Collector Current: 200 mA
• Collector- Emitter Voltage Max: 40 V
• Collector- Base Voltage: 60 V
• Emitter- Base Voltage: 5 V
• Collector-Emitter Saturation Voltage: 400 mV
• Pd - Power Dissipation: 1W
• Gain Bandwidth Product fT: 250 MHz

KSH45H11TM 80V 8A 40MHz 1.75W Surface Mount PNP Bipolar Transistor SOT-223-4 (3 Leads + Tab)

Specification:-

• Package/Case: TO-252-3 (2 Leads + Tab) / DPAK
• Type of Transistor: PNP
• Polarisation: Bipolar
• Maximum DC Collector Current: 8 A
• Collector- Emitter Voltage VCEO Max: 80 V
• Emitter- Base Voltage VEBO: 5 V
• Collector-Emitter Saturation Voltage: 1 V
• Pd - Power Dissipation: 20 W
• Gain Bandwidth Product fT: 40 MHz

BCX53E 80V 1A 125MHz 2W Surface Mount Bipolar Transistor SOT-89

Specification:-

• Package: TO-243AA / SOT-89
• Maximum DC Collector Current: 1 A
• Collector- Emitter Voltage VCEO Max: 80 V
• Collector- Base Voltage VCBO: 100 V
• Emitter- Base Voltage VEBO: 5 V
• Collector-Emitter Saturation Voltage: 500 mV
• Pd - Power Dissipation: 1.3 W
• Gain Bandwidth Product fT: 125 MHz

BCW61D 80V 32V 100mA 100MHz 250mW Surface Mount PNP Bipolar Transistor SOT-23

Specification:-

• Package: SOT-23-3 / TO-236-3 / SC-59
• Mounting Style: SMD/SMT
• Transistor Polarity: PNP
• Maximum DC Collector Current: 100 mA
• Collector- Emitter Voltage VCEO Max: 32 V
• Collector- Base Voltage VCBO: 32 V
• Emitter- Base Voltage VEBO: 5 V
• Collector-Emitter Saturation Voltage: 550 mV
• Pd - Power Dissipation: 250 mW
• Gain Bandwidth Product fT: 100 MHz

BC807-40W 45V 500mA 80MHz 200mW Surface Mount PNP Bipolar Transistor SOT-323

Specification:-

• Package: SC-70 / SOT-323
• Mounting Style: SMD/SMT
• Transistor Polarity: PNP
• Maximum DC Collector Current: 500 mA
• Collector- Emitter Voltage VCEO Max: 45 V
• Collector- Base Voltage VCBO: 50 V
• Emitter- Base Voltage VEBO: 5 V
• Collector-Emitter Saturation Voltage: 700 mV
• Pd - Power Dissipation: 200 mW
• Gain Bandwidth Product fT: 80 MHz

13.56MHz RFID Tag with Black Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32-bit Unique ID
• Color: Black
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Green Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Green 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Red Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Red 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Yellow Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Yellow 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Multicolor Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Multicolor 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Multicolor Keychain for Access Control (2 pcs each)

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Multicolor 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

DC12V 315MHz 4-CH RF Wireless Relay Module with Remote Controller (White)

Specification:

• Frequency: 315MHz RF
• Operating Voltage (Relay): DC 12V
• Standby Current: 10mA
• Remote Distance: 20-200m
• Relay Channels: 4CH (4 independent relays)
• Remote Control: Approx. 6.8 x 3.8 x 1.5cm/2.7 x 1.5 x 0.6 inch
• Remote Switch : Approx. 7.5 x 5.5 x 2.6cm/3 x 2.2 x 1 inch

HC-12 433Mhz SI4463/SI4438 Wireless Serial Port Module

Specification:-

• Model Number: HC-12
• Operating Voltage: 3.2V-5V
• Transmit Power Max: 20dBm
• Operating Frequency: 433.4MHz to 473.0MHz
• Communication Distance: About 1000 meters

Laser Transmitter Module For Arduino AVR PIC

Specifications 

1. Operating Voltage: 5V.
2. Output Power: 5mW.
3. Wavelength: 650nm (red laser).
4. Suitable for Arduino, AVR, and PIC microcontroller projects.

Light dependent resistors sensor 12 mm (LDR) GL12528 pack of 2pcs

Specification:-

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  250V
5. Max. power  :  200W
6. Package includes : 5 pieces

27 mm diameter Piezoelectric sensor plate pack of 5pcs

Specification

1. Converts Mechanical Force Into Electrical Output
2. Impedance value  :   ≤500Ω.
3. Low soldering temperature.
4. Strain sensitivity  :  5V/µƐ
5. Package includes : 5 pieces

High quality Infrared Transmitter & Receiver diode pack of 10 pair

Specification

1. Working voltage  :  2.7~5.5V
2. Forward voltage  :  1.2-1.5V
3. Forward current  :  100mA
4. Power  :  100mW
5. Frequency  : 38KHz
6. Receiver angle  :  ñ45ø
7. Lens color  :  blue and black
8. Operate distance  :  18~20m
9. Pin length  :  Approx. 25mm / 0.98"
10. Package includes : 10 pair ( 10 Transmitter + 10 Receiver)

High quality Infrared Transmitter & Receiver diodes pack of 20 pair

Specification

1. Working voltage  :  2.7~5.5V
2. Forward voltage  :  1.2-1.5V
3. Forward current  :  100mA
4. Power  :  100mW
5. Frequency  : 38KHz
6. Receiver angle  :  ñ45ø
7. Lens color  :  blue and black
8. Operate distance  :  18~20m
9. Pin length  :  Approx. 25mm / 0.98"
10. Package includes : 20 pair ( 20 Transmitter + 20 Receivers)

High quality Infrared Transmitter & Receiver diodes pack of 50 pair

Specification

1. Working voltage  :  2.7~5.5V
2. Forward voltage  :  1.2-1.5V
3. Forward current  :  100mA
4. Power  :  100mW
5. Frequency  : 38KHz
6. Receiver angle  :  ñ45ø
7. Lens color  :  blue and black
8. Operate distance  :  18~20m
9. Pin length  :  Approx. 25mm / 0.98"
10. Package includes : 50 pair ( 50 Transmitter + 50 Receivers)

MPX5010DP Pressure 0-10KPa transmitter sensor module

Specifications:-

1. Model name : MPX5010DP
2. Input voltage : 4.75V – 5.25V
3. Operating pressure range : 0 - 10k/pa
4. Pressure type : Differential
5. Number of pins : 6
6. Operating temp. range : -40°C to +125°C

Light dependents resistor sensor 20 mm (LDR) GL20528 pack of 2pcs

Specification:-

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  500V
5. Max. power  :  500W
6. Package includes : 2 pieces

TSOP1838 Infrared receiver silver plating shield (1838B) pack of 5pcs

Specification:-

1. Operating voltage:  2.5V to 5.5V
2. IR detection:  38kHz
3. Operating current:  5mA
4. High range and wide coverage area
5. Improved immunity
6. The package includes: 5 pieces

NTC 10K wire thermistor sensor DS18B20 pack of 1pcs

Specifications:-

1. Programmable Temperature Sensor
2. 1-Wire method
3. Operating voltage  :   5V
4. Temperature range   :  -55°C to +125°C
5. The package include : single piece

MQ3 Alcohol, Ethanol and smoke detections sensor pack of 10pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Sensing resistance  :  2kΩ to 20KΩ
4. Load resistance  :  200kΩ (Adjustable)
5. Heating consumption  :  lower than 750mW
6. Concentration scope : 200 to 10,000ppm

Light dependents resistor sensors 20 mm (LDR) GL20528 pack of 10pcs

Specification

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  500V
5. Max. power  :  500W
6. Package includes : 10 pieces

DHT11 Temperature and humidity sensor pack of 5pcs

Specification

1. Operating Voltage  :  5V
2. Operating current  :  0.3mA
3. Temperature Range  :  0°C to 50°C
4. Humidity Range  :  20% to 90%
5. Package includes : 20 pieces

DHT11 Temperature and humidity sensors pack of 10pcs

Specification

1. Operating voltage  :  5V
2. Operating current  :  0.3mA
3. Temperature range  :  0°C to 50°C
4. Humidity range  :  20% to 90%
5. Package includes : 100 pieces

MQ4 Methane, CNG and flammable gas detections sensors pack of 10pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Target gas : Methane
4. Sensing resistance  :  2kΩ to 20KΩ
5. Load resistance  :  200kΩ (Adjustable)
6. Heating consumption  :  lower than 750mW
7. Concentration scope : 200 to 10,000ppm

MQ5 LPG and Natural flammable gas detection sensors pack of 5pcs

Specification:-

1. High-quality aluminum oxide body
2. Operating voltage:  5V
3. Target gas: LPG
4. Sensing resistance:  2kΩ to 20KΩ
5. Load resistance:  200kΩ (Adjustable)
6. Heating consumption:  lower than 800mW
7. Concentration scope: 200 to 10,000ppm

NTC 10K wire thermistors sensors DS18B20 pack of 10pcs

Specifications

1. Programmable Temperature Sensor
2. 1-Wire method
3. Operating voltage  :   5V
4. Temperature range   :  -55°C to +125°C
5. Package includes : 10 pieces

TSOP1838 Infrared receivers silver plating shield (1838B) pack of 10pcs

Specification

1. Operating Voltage  :  2.5V to 5.5V
2. IR detection  :  38kHz
3. Operating current  :  5mA
4. High Range and wide coverage area.
5. Improved immunity
6. Package includes : 10 pieces

TSOP1838 Infrared receivers silver plating shields (1838B) pack of 50pcs

Specification:-

1. Operating voltage  :  2.5V to 5.5V
2. IR detection  :  38kHz
3. Operating current  :  5mA
4. High Range and wide coverage area.
5. Improved immunity
6. Package includes : 50 pieces

XTR105P 4 to 20mA Current transmitter with Sensor excitation and linearization DIP 14 pin IC

Specification

1. Supply voltage range : 7.5V to 36V
2. IC type : Current transmitter
3. Current supply : 20mA
4. Interface : 3 wire
5. Two precision current source
6. Low offset drift
7. Low output current noise

8 Section AM FM Radio Universal antenna stainless steel replacement antenna Silver color

Specifications:

• Frequency: 45 to 450MHZ
• Material: Chromium Copper
• Number of sections: 8
• Maximum stretch length: 54cm / 21 in
• Shortest contraction length: 12.8cm / 5 in
• 360° rotatable

Transmissive Optical switch sensor with Phototransistor Output photo interrupter sensor

Specifications

1. Operating voltage range : 4.5V to 12V DC
2. Forward current : 50mA
3. Reverse voltage : 4V
4. Forward voltage : 1.2V
5. Aperture width : 0.5mm
6. Sensor mounting : Through hole
7. Power dissipation : 100mW

10K NTC Thermistor temperatures sensor

Specifications:-

1. Output : 2 wires XH(2.54) -2Y
2. Type : NTC 10k±1% 3950
3. Size of probe : 5mm x 25mm
4. Length of wire : 500 mm
5. Measurement range : -30°C to 120°C

5V DC Qi Standard Micro USB Input PCBA circuit board transmitter with coil for Wireless phone charging

Specifications:-

1. Operating voltage : 5V DC
2. Input current : 2A
3. Charging voltage : 5V
4. Charging current : 1.5A
5. Power rating : 10 watt
6. Charging distance : 10mm
7. Compact design and easy to use
8. Micro USB input

4CH RC remote control 27MHz circuit PCB transmitter & receiver board with antenna Radio system for toy car

Specification:-

• Receiver operating voltage: 3.7–6V
• Transmitter operating voltage: 3.7-9V (HW Battery)
• Transmitter Range: 12-15 (approx)
• Color: Brown
• Material: fiberglass
• Electronic frequency: 27MHZ
• Dimensions: pad 3 * 9 cm, receiving plate 3.5 * 2 cm, Antenna, 19 cm
• Item Weight: 16g

Wire is only for referral purposes. (Not Compulsory)

Bluetooth FM USB AUX Card MP3 Stereo Audio Player Decoder Module(105 x 25)

Specification

• Connector Type            Bluetooth
• Color                            Black
• Audio Output Type      Speakers
• Material                        Plastic
• Compatible Devices     All audio input

CT6B 6 Channel RC Remote Control Transmitter 2.4GHZ, 12V DC with FS-R6B Receiver system

Specification

• Channels: 6 
• RF range: 2.4055-2.475GHZ
• Bandwidth: 500KHZ
• RF power: less than 20 dBm
• Display mode: LED indicator 
• FB-R6B 6 channels 
• Power: 4.0-6.5V
• Weight: 13g

4CH RC Remote Control 27MHz Circuit PCB Transmitter And Receiver Board with Antenna

Specification:-

• Electronic frequency: 27MHZ
• Material: Fiberglass
• Color: Green Receiver
• Size: app. 4.1×2.7cm
• Transmitter Size: app. 3.8×5.6cm
• Receiver operating voltage: 3.7-6V
• Transmitter operating voltage: 3.7-9V (HW Battery)
• Transmitter Range 12–15 (approx)

Wire is only for referral purposes. (Not Compulsory)

ESP8266 Wireless WiFi Transceiver Module

Specification:-

• 1MB Flash Memory
• Wi-Fi Direct (P2P), soft-AP
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW
• Integrated low power 32-bit CPU could be used as an application processor

Combo of Electronic Components Project Kit or Breadboard | Capacitor | Resistor | LED & | Switch | Comes in a Box

Specification:-

• 5mm LED round shape
• 830 Points Half-Size Solderless Breadboard
• Cylindrical-shaped mini-shaft RC motor
• 0.25W power audio woofer speaker 
• 3-Terminal Positive Voltage Regulator
• Self-Lock latching mini push button
• 5v Piezoelectric Buzzer Beeper Alarm
• Aluminum Electrolytic Capacitors
• Multilayer Ceramic Capacitor

Kit includes: 9V Battery-1pcs, 9V Battery connector-1pcs, 830 points breadboard-1pcs, cylindrical shape Motor-1pcs, Diode(1N4007)-10pcs each, Zener Diode(3.3v)-10pcs, Single core Red & Black Wire-1mtr each, 1.2inch 16-ohm speaker-1pcs, Push Button-2pcs

Transistor (2N3906, BC557, BC558, 2N2222)5pcs each, Voltage Regulator (7805,7809,7812)-1pcs each, 5v Buzzer-1pcs, 5mm LED (red, blue, green, yellow, white)-5pcs each, IR Transmitter & Receiver-5pcs each, Variable Resistor (10k, 100k,1k,2k,5k)1pcs each, Ic's (4017, 555 timer)-1pcs each, Electrolytic Capacitor (1uf, 2.2uf, 4.7uf,47uf, 220uf, 100uf, 10uf)5pcs each, Ceramic Capacitor (104, 103, 101, 100, 102); 10 pieces each, 1/4-watt resistor (5.6, 15k, 470, 2.2, 390, 220)-10 pieces each

27MHz 4CH RC Remote Control Board Two-Way RC Radio Transmitter and Receiver Board with Antenna for Toy Car

Specification:-

• Receiver operating voltage: 3.7–6V
• Transmitter operating voltage: 3.7-9V (HW Battery)
• Communication Distance: 10 meters/33 feet
• Electronic frequency: 27MHZ
• Material: fiberglass
• Color: Brown

Wire is only for referral purposes. (Not Compulsory)

DC 12V Wireless Relay 1 Channel with Remote Control Receiver And Transmitter Switch

Specification :-

• Voltage: 12V DC
• Contact Material: Nickel
• Contact Type: Normally Open
• Current Rating: 10 Amps
• Mounting Type: Door Mount

5V DC Qi Standard C-Type Micro USB Input PCBA Circuit Board Transmitter with Coil for Wireless Phone Charging

Specification:-

• Input voltage: 5VDC
• Input current: 2A
• Output Power:5W 7.5W 10W 15W
• Working frequency:105Khz ~ 205Khz
• Usage: Mobile Phone

AD694 4-20mA Monolithic Current Transmitter IC

Specification:-

• Supply Voltage: 36 V
• VS to IOUT: 36 V
• Input Voltage: –0.3 V to +36 V
• Reference Short Circuit to Common: Indefinite
• 4 mA On/Off: 0 V to 36 V
• Lead Temperature: 300°C
• Storage Temperature Range: −65°C to +150°C

27MHz 4CH RC Car Remote Control Circuit PCB Transmitter and Receiver Board with Antenna

Specification:-

• Receiver operating voltage: 3.7–6V
• Transmitter operating voltage: 3.7-9V (HW Battery)
• Communication Distance: 10 meters/33 feet
• Electronic frequency: 27 MHz
• Material: fiberglass
• Color: Brown

Wire is only for referral purposes. (Not Compulsory)

4CH RC Remote Control 27MHz C-Type Circuit PCB Transmitter And Receiver Board with Antenna

Specification:-

• Receiver operating voltage: 3.7-6V
• Electronic frequency: 27 MHZ
• Transmitter operating voltage: 3.7-9
• Transmitter Range: 12-15 (approx)
• Transmitter Size: 25mm x 90mm (approx)
• Receiver size: 28.3mm x 48.3mm
• Antenna size: 19cm
• Material: fiberglass

2CH RC Remote Control 27MHz Circuit PCB Transmitter and Receiver Board with Antenna

Specification:-

• Receiver operating voltage: 3.7–6V
• Transmitter operating voltage: 3.7-9V (HW Battery)
• Transmitter Range: 12-15 (approx)
• Color: Brown
• Material: fiberglass
• Electronic frequency: 27 MHz

Combo of BO Motor | Rubber Wheels | 4CH Transmitter & Battery Holder (11 Item)

Specification:-

• 4CH RC remote control
• Diameter of the wheel : 60mm
• BO gear motor compatible
• High-quality material build
• AA 4 cell battery holder
• AA 2 cell battery holder
• Transmitter operating voltage: 3.7-9V (HW Battery)
• Transmitter Range: 12-15 (approx)

HC-05 Wireless Bluetooth Transceiver RF Main Module Serial For Arduino

Specifications:-

1. Bluetooth Version: 2.0+EDR (Enhanced Data Rate).
2. Operating Voltage: 3.6V - 6V.
3. Communication Range: Up to 10 meters.
4. Supports various communication modes for flexibility in project integration.

NRF24L01 antenna V5.0 + PA + LNA SMA wireless Module 8 Pin 1100 meters

Specifications:-

1. Input supply voltage: 3V
2. Working current: 15mA
3. Maximum output power: +20 dBm
4. Power down mode current: 4.2 μA
5. Operating range: 1Km

IRF540 100V 33A N-channel HEXFET Power Mosfet

Specifications

1. Type : Small signal N-Channel MOSFET
2. Continuous drain current : 33A at 25°C
3. Pulsed drain current : 110A
4. Minimum gate threshold voltage : 2V
5. The maximum gate threshold voltage : 4V
6. Gate source voltage : ±20V
7. Maximum drain-source voltage : 100V

IRFI630A 200V 9A N-channel Power Mosfet

Specifications

1. Type : N - channel
2. Drain-to-Source breakdown voltage : 200 V
3. Gate-to-Source voltage, max : ±20 V
4. Drain-source On-state resistance, max : 0.400 Ohm
5. Continuous drain current : 9A
6. Total gate charge : 43 nC
7. Power dissipation : 74 W

IRF840 500V 8A N-channel Power Mosfet

Specification:-

1. N-Channel Power MOSFET
2. Continuous drain current : 8A
3. Gate threshold voltage : 10V (limit = ±20V)
4. Drain to source breakdown voltage: 500V
5. Drain source resistance : 0.85 Ohms
6. Rise time and fall time : 23nS and 20nS

IRF520 100V 9.2A N-channel Power Mosfet

Specifications

1. Type: N-Channel
2. Drain-Source Volt (Vds) : 100V
3. Drain-Gate Volt (Vdg) : 100V
4. Gate-Source Volt (Vgs) : 20V
5. Drain Current (Id) : 10A
6. Power Dissipation (Ptot): 70W

2N3773 Powerful 4TR 250W high quality audio amplifier circuit board

Specifications:-

• The 2N3773 power transistors are designed for high-power audio
• Powerful Stereo HI-FI Sound, 2 channel Stereo Input & Output
• It is an upgraded version of the circuit board with more power and sound quality
• Input Supply: 18-0-18 volt, 5 Amp
• NOTE: Don't connect with 12-0-12 volt
• Premium-quality circuit board connected with all volume, base, & triple potentiometers.

4V-12V DC powerful Dynamo motor and generator

Specifications;-

1. Dynamo powerful motor and generator in one
2. Works both as motor and generator
3. Produce electricity by converting rotary motion into electric current
4. Works fine in the range of 4V to 12V
5. Excellent working mechanism
6. Metal case body for protection

12V - 24V 4500rpm Powerful heavy duty Mitsumi DC motor

Specification:-

1. 100% Brand New and High Quality
2. Rpm:  4500 rpm
3. Working voltage:  12V-24V
4. No Load Speed: 10000RPM
5. Cylindrical shape
6. Main Color:  Silver Tone

3.5mm Female to 2 RCA female dual splitter interface audio connector pack of 1pcs

Specification

1. 100% branded and new product
2. Dual splitter 3.5mm female to two RCA female
3. Contact material  : high-quality copper
4. Prevent data fluctuation
5. High carbon steel body with silver plating
6. Hard plastic insulation on top and inside

3.5mm Female to 2 RCA female dual splitter interface audio connector pack of 5pcs

Specification

1. 100% branded and new product
2. Dual splitter 3.5mm female to two RCA female
3. Contact material  :  high quality copper
4. Prevent data fluctuation
5. High carbon steel body with silver plating
6. Hard plastic insulation on top and inside

3.5mm Female to 2 RCA female dual splitter interface audio connectors pack of 20pcs

Specification

1. 100% branded and new product
2. Dual splitter 3.5mm female to two RCA female
3. Contact material  :  high quality copper
4. Prevent data fluctuation
5. High carbon steel body with silver plating
6. Hard plastic insulation on top and inside

3.5mm Female to 2 RCA Male dual splitter interface audio connector pack of 1pcs

Specification

1. 100% branded and new product
2. Dual splitter 3.5mm female to two RCA male
3. Contact material  :  high quality copper
4. Prevent data fluctuation
5. High carbon steel body with silver plating
6. Hard plastic insulation on top and inside

3.5mm Female to 2 RCA Male dual splitter interface audio connector pack of 5pcs

Specification

1. 100% branded and new product
2. Dual splitter 3.5mm female to two RCA male
3. Contact material  :  high quality copper
4. Prevent data fluctuation
5. High carbon steel body with silver plating
6. Hard plastic insulation on top and inside

3.5mm Female to 2 RCA Male dual splitter interface audio connectors pack of 20pcs

Specification

1. 100% branded and new product
2. Dual splitter 3.5mm female to two RCA male
3. Contact material  :  high quality copper
4. Prevent data fluctuation
5. High carbon steel body with silver plating
6. Hard plastic insulation on top and inside

Single RCA male to 2 RCA female dual splitter interface audio connector pack of 1pcs

Specification

1. 100% branded and new product
2. Dual splitter single RCA male to two RCA female
3. Contact material  :  high quality copper
4. Prevent data fluctuation
5. High carbon steel body with silver plating
6. Hard plastic insulation on top and inside

Single RCA male to 2 RCA female dual splitter interface audio connector pack of 5pcs

Specification

1. 100% branded and new product
2. Dual splitter single RCA male to two RCA female
3. Contact material  :  high quality copper
4. Prevent data fluctuation
5. High carbon steel body with silver plating
6. Hard plastic insulation on top and inside