5V 2 channel Low level solid state relay module 240V 2A output with resistive fuse

Specification:-

1. Operating voltage : 3V to 5V
2. Trigger voltage : 5V
3. Supply current : 2mA
4. Switching voltage range : 240V at 2A
5. Operating current : 16mA
6. 2 channel 2 AMP Solid State Relay board
7. Control 2 loads of up to 2 amps each at 100V or 240V AC

5V 1 channel Low level solid state relay module 240V 2A output with resistive fuse

Specification:-

1. Operating voltage : 3V to 5V
2. Trigger voltage : 5V
3. Supply current : 2mA
4. Switching voltage range : 240V at 2A
5. Operating current : 12.5mA

5V 4 channel Low level solid state relay module 240V 2A output with resistive fuse

Specification:-

1. Operating voltage : 3V to 5V
2. Trigger voltage : 5V
3. Supply current : 2mA
4. Switching voltage range : 240V at 2A
5. Operating current : 12.5mA
6. 4 channel 2 AMP Solid State Relay board

SSR-25DA 3V-32V DC to 24V-380V AC 25A Solid state relay module pack of 1pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 380V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

SSR-25DA 3V-32V DC to 24V-380V AC 25A Solid state relay module pack of 5pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 380V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

SSR-25DA 3V-32V DC to 24V-380V AC 25A Solid state relay modules pack of 10pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 380V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

15A 125/250V 50/60Hz DC Automatic Reset Relay Fuse Current Overload Protector

Specifications:-

• Current Rating: 15A
• Voltage: 12V
• High-Amperage Compatibility
• Reliable Relay Fuse Design
• Simple Installation

1 Channel 12V Relay Module with Optocoupler Isolation, High/Low Level Trigger Pack of 1

Specification:-

• Number of Channels: 1
• Operating Voltage: 12 V DC
• Trigger Voltage: 3.3 V–5 V DC (High/Low Level Trigger)
• Maximum Switching Voltage: 250 V AC / 30 V DC
• Maximum Switching Current: 30 A
• Relay Type: High Current Relay
• Application: Suitable for Home Automation, Arduino, Raspberry Pi, PLC, MCU, and DIY Electronics Projects

IRF3205 55V 110A N-channel power mosfet

Specification 

1. Type                                   N channel
2. Drain- source voltage          55V
3. Gate-source voltage            ±20V
4. Drain current                       110A
5. Power Dissipation                200W

SSR-25DA 3V-32V DC 25A solid state relay pack of 1pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 480V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

SSR-25DA 3V-32V DC 25A solid state relay pack of 5pcs

Specifications:-

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 480V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

SSR-25DA 3V-32V DC 25A solid state relays pack of 10pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 480V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

SSR-40DA 3V-32V DC 40A solid state relay pack of 1pcs

Specifications

1. Load current rate: 40A
2. Trigger voltage: 3V to 32V
3. Switching voltage : 24V to 480V AC at 40A
4. Type: DC to AC single phase
5. Maximum offset time: 10ms

SSR-40DA 3V-32V DC 40A solid state relay pack of 5pcs

Specifications

1. Load current rate : 40A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 480V AC at 40A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

SSR-40DA 3V-32V DC 40A solid state relays pack of 10pcs

Specifications

1. Load current rate: 40A
2. Trigger voltage: 3V to 32V
3. Switching voltage : 24V to 480V AC at 40A
4. Type: DC to AC single phase
5. Maximum offset time: 10ms

120V AC to 24V DC 2A 6 Terminal LT2S-12VDC-T Subminiature DPDT PCB panel mount power relays pack of 10pcs

Specifications

1. Operating voltage : 12V to 24V DC
2. Maximum voltage : 120V AC
3. Max. operating voltage : 2A
4. Supply current : 0.2A
5. 2 Form C configuration.
6. Bifurcated contacts.
7. Epoxy-sealed.

HFS41/1D-380A5PS-NG Through Hole 4-Pin SCR Solid State Relay

Specification:-

• Package: DIP 4-Pin
• Type: DC to AC
• Configuration: 4-pin through-hole 
• Input Control Voltage: 3VDC to 15V DC
• Output Load Capacity: 5A at 380V AC

HFS32D/24D-24D3M-N Through Hole 4-Pin SPST 24V DC 100mA Solid State Relay

Specification:-

• Package: DIP 4-Pin
• Input Current: 100 mA
• Output Voltage: 24V DC
• Configuration: SPST (Single Pole Single Throw)
• Low Power Consumption

HFS32D/24D-48D0R1T-N Through Hole 4-Pin SPST Input 24V DC Output 48V DC 100mA Solid State Relay

Specification:-

• Package: DIP 4-Pin
• Input Current: 100mA
• Input Voltage: 24V DC
• Output Voltage: 48V DC
• Contact arrangement: 1 Form A
• Configuration: SPST (Single Pole Single Throw)

HFS32D/60D-48D0R1T-N Through Hole 4-Pin SPST Input 60V DC Output 48V DC 100mA Solid State Relay

Specification:-

• Package: DIP 4-Pin
• Input Current: 100 mA
• Input Voltage: 60V DC
• Output Voltage: 48V DC
• Contact arrangement: 1 Form A
• Configuration: SPST (Single Pole Single Throw)

Single Channel 5V Relay Module low level trigger

Specification

1. Number of channels : 1
2. Operating voltage : 5V
3. Trigger voltage : 10V
4. Switching voltage : 250V at 10A
5. Equipped with high-current relay
6. It can control both AC and DC appliances such as Motors, lights, fans, etc.

BFD-1000 5 channel line follower sensor module

Specifications:-

1. Detecting distance: 0-4cm (black line sensor) 0-5cm (adjustable distance detection)
2. Input voltage: 3.0-5.5V
3. Output Type: Digital output (high and low)

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier module pack of 1pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power  :  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

5V 1 channel relay module compatible with 5V microcontroller

Specification:-

1. Number of channels: 1
2. Supply voltage: 3.75V to 6V
3. Quiescent current: 2mA
4. Trigger voltage: 5V
5. Trigger current: 20mA
6. Current when the relay is active: 70mA
7. Relay maximum contact voltage: 250V AC or 30V DC
8. Relay maximum current:  10A

5V 2 channel relay module with light coupling

Specification:-

1. Number of channels : 2
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

82D05 5V Stereo dual channel audio bluetooth 2.0 module

Specifications:-

1. Operating voltage : 5V
2. Dual channel stereo
3. Current : 300mA
4. Power rating : 3W
5. Small size

ESP8266 5V 1 Channel relay module IOT smart home remote control switch

Specifications:-

1. Transmission Distance (m) : 40m
2. Trigger voltage: 5V DC
3. Switching voltage: 250V @ 10A
4. Switching voltage: 30V @ 10A
5. Relay voltage : 5V (10A/250V AC, 10A/30V DC)
6. Baud rate: 9600

IRFZ44N 55V 49A To-220 N-Channel Transistor Mosfet

Specifications

• Package Type: TO-220B (Through-Hole)
• Drain-to-Source Breakdown Voltage : 55V
• Continuous Drain Current :49A
• Static Drain-to-Source On-Resistance : 17.5mΩ
• Power Dissipation: 94W
• Total Gate Charge: 63nC
• Gate Threshold Voltage : 4V

5V 30A 1-Channel Relay Module

Specification:-

• Relay Type: Single channel
• Operating Voltage: 5V DC
• Current Rating: 30 Amps
• Current Capacity: 30A at 250V AC or 30V DC

Pinouts:

• DC+: DC power supply positive pole
• DC-: DC power supply negative pole
• IN: signal triggering pin
• JD+: relay control voltage positive
• JD-: relay control voltage negative

P75NF758 75V 80A N-Channel Power Mosfet Pack of 5

Specification:-

• Model: P75NF758
• Type: N-Channel Power MOSFET
• Drain-to-source voltage: VDSS = 75 V
• Gate-to-source voltage: VGSS = ± 20 V
• Drain current: ID = 80 A
• Channel temperature: Tch = 150 °C
• Storage temperature: Tstg = -55 to +175 °C

IRF4905 55V 74A P-Channel HEXFET Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: P-Channel
• Drain-Source Breakdown Voltage (Vds): 55V
• Continuous Drain Current (Id): 74A
• Drain-Source Resistance (Rds On): 20mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 180 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 200W

P80NF55 55V 80A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 55V
• Continuous Drain Current (Id): 80A
• Drain-Source Resistance (Rds On): 8Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 155 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 300W

IRF1407 75V 130A N-Channel HEXFET Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 75V
• Continuous Drain Current (Id): 130A
• Drain-Source Resistance (Rds On): 7.8mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 250 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 330W

IRF5305 55V 31A P-Channel HEXFET Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: P-Channel
• Drain-Source Breakdown Voltage (Vds): -55V
• Continuous Drain Current (Id): -31A
• Drain-Source Resistance (Rds On): 60mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 63 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 110W

IRFP054N 55V 81A N-Channel HEXFET Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 55V
• Continuous Drain Current (Id): 81A
• Drain-Source Resistance (Rds On): 0.012 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 130 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 170W

IRFP044N 55V 53A N-Channel HEXFET Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 55V
• Continuous Drain Current (Id): 53A
• Drain-Source Resistance (Rds On): 0.020 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 61 nC
• Operating Temperature Range: -55 to 175°C
• Power Dissipation (Pd): 120W

IRF2807 75V 82A N-Channel HEXFET Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 75V
• Continuous Drain Current (Id): 82A
• Drain-Source Resistance (Rds On): 13mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 160 nC
• Operating Temperature Range: -55 to 150°C
• Power Dissipation (Pd): 230W

IRFZ48N 55V 64A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 55V
• Continuous Drain Current (Id): 64A
• Drain-Source Resistance (Rds On): 0.014 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 81 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 130W

IRFP2907 75V 209A N-Channel Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 75V
• Continuous Drain Current (Id): 209A
• Drain-Source Resistance (Rds On): 4.5mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 620 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 470W

IRF1405 55V 169A N-Channel HEXFET Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 55V
• Continuous Drain Current (Id): 169A
• Drain-Source Resistance (Rds On): 5.3mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 260 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 330W

C-Type 2 Channel BT5.0 Stereo Audio Amplifier 3.7-5V MP3 Audio Receiver Module

Specification:-

• Maximum Supply Voltage: 5 Volts
• Minimum Supply Voltage: 3.7 Volts
• Dimensions: 30 x 30 x 1.5 mm
• Support profile: A2DP, AVCTP, AVDTP, HFP
• BT5.0-Audio: Genuine 5.0 Blue tooth audio decoding chip

DIY Water Pump Combo Kit Jumper Wires | 5V Relay & 1m PVC Tubing (62 Items)

Specification:-

• Jumper Wires
• 5V 1-Channel Relay
• DC Mini Water Pump
• 1-meter Flexible PVC Tubing
• Relay Module Functionality
• Compact Water Pump
• Flexible PVC Tubing

Component List: 1 Pcs 5V Relay Module, 1 Pcs DC Mini water pump with 1M Tubing Pipe, 20 pcs male-to-male jumper wire, 20 pcs male-to-female jumper wire, 20 pcs female-to-female jumper wire

Combo of LM393 LDR Sensor Module with 5V 1 Channel Relay & Jumper Wire (12 Item)

Specification:-

• Operating voltage : 3.3V-5V
• Power indicator : Red
• Digital switch output indicator : Green
• Number of channels: 1
• Quiescent current: 2mA
• Trigger current: 20mA
• Relay maximum current:  10A

Package Included:-  1 Pcs 5V Relay Module, 1 Pcs LDR Sensor Modulem, 10 Pcs Female to Female Jumper wire

12V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 2 channel relay module with light coupling

Specification:-

1. Number of channels : 2
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

16 x 4 Blue/White color LCD display module (JHD539M9)

Specifications

1. Color of display: Blue
2. Color of character: White
3. Size : 16 x 4 (16 character x 4 rows)
4. Power supply : +5V
5. Operating current : 1.65mA
6. Board dimensions  :  88mm x 60mm (LxB)
7. Display dimensions   :   62mm x 26mm (LxB)

GD4142 Dual USB 5V 1A DC to DC step up booster power bank charging module pack of 1pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on the back
6. Intelligent automatic shutdown

5V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 4 channel relay module with light coupling

Specification:-

1. Number of channels : 4
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 6 channel relay module with light coupling

Specification:-

1. Number of channels : 6
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 4 channel relay module with light coupling

Specification:-

1. Number of channels : 4
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 8
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 16 channel relay module with light coupling and LM2576 power supply

Specification:-

1. Number of channel : 16
2. Operating voltage : 12V
3. Trigger voltage : 12V
4. Switching voltage : 250V at 10A
5. 12V relay with AC contact capacity of 10A 250V and optocoupler protection
6. The onboard power supply module

24V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 24V
3. Max. current : 30mA
4. Trigger voltage : 24V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

24V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 8
2. Operating voltage : 24V
3. Max. current : 30mA
4. Trigger voltage : 24V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

24V 4 channel relay module with light coupling

Specification:-

1. Number of channels: 4
2. Operating voltage: 24V
3. Max. current: 30mA
4. Trigger voltage: 24V
5. Switching voltage: 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 4 Channel relay module programmable with opto isolated RS485 STM8S103F3

Specification:-

1. Number of channels : 4
2. Operating voltage : 12V
3. Max. current : 20mA
4. 4 Optocoupler isolation
5. 4 relay closed LED indicating lamp
6. 4 input connections
7. RS485 communication connection
8. STM8S103F3 programmable microcontroller

Made in India 5 Volt Single channel isolated relay module

Specification:-

1. Made in India
2. Number of channels : 1
3. Supply voltage : 5 Volts
4. Current when the relay is active : 7A
5. Relay maximum contact voltage : 250V AC or 28V DC
6. Relay Maximum current :  10A

DC 6V to 30V 1 Channel Delay power relay module with Adjustable timing cycle

Specification:-

1. Number of channels : 1
2. Operating voltage : 6V to 30V DC
3. Max. current : 50mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Optocoupler Isolation

12V DC 250V AC 16A 6 Terminal NO HF115F-I/012-1HS3A Switching current PCB panel mount power relay pack of 1pcs

Specifications

1. Rated voltage : 250V AC
2. Max. switching voltage : 400V AC
3. Rated current : 16A
4. Limiting continuous current : 12A
5. Operate/release time max. : 8/6ms

12V DC 100 Watt Inverter Circuit Board with Relay and Buzzer (110mm x 60mm x 2mm)

Specification

• Input voltage: 12V DC
• Power rating: 100 Watt
• Frequency : 50HZ/60HZ
• Inbuilt over voltage, over current, and short circuit protection
• Simple and easy-to-use design
• Fast transient response
• Dimension: 110 x 60 x 2 mm
• It's capable of operating CFL bulbs, LED bulbs, bulb, Light Charger, etc.
• It's not capable of electromagnetic transformer devices

RF Transmitter 433 Mhz Remote Controls with Wireless Remote Control Switch DC 12V

Specifications:-

• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes, and off.
• 3 mode function : Momentary, Toggle, Latching Mode have inside

DC 12V RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

DC 12V NE555 Timer Switch Adjustable Disconnect Delay Relay Module

Specification:-

• Module based on the NE555 chip.
• Input voltage: DC 12V
• Adjustable time: 0–10 s
• AC Control voltage: 250V/max. 10A
• DC Control Voltage: 30V/max. 10A
• Max. load: 2200W

Combo of 37 in 1 Ultimate Sensor Kit for Arduino

Specification:-

• 10K resistor Rotary encoder module
• Hall effect detection sensor (easily available)
• Joystick sensor Input voltage range: 3.3V to 5V
• Suitable for Arduino, AVR, and PIC microcontroller projects
• The sensor module kit is perfect for various DIY projects and robotics science projects
• The Arduino sensor kit can be used by both beginners and professionals.
• This is a great sensor kit for getting started with microcontrollers and sensors.

Package includes:- Joystick module, Relay module, Big sound, Small sound, Tracking, Avoid, Flame, Linear hall, Touch, Digital temp, Buzzer, Passive buzzer, RGB led, SMD led, Two color, Two color, Reed switch, Mini reed, Heartbeat, 7-color flash, Laser emit, Button, Shock, Rotary encoders, Light cup, Tilt switch, Ball switch, Photoresistor, Temp and humidlty, Analog hall, Hall magnetic, TEMP 18B20, Analog temp, TR emission, IR receiver, Tap module, and Light blocking Sensors. 

Combo of Timer Relay Module (6V–30V DC) with Adjustable Delay | 6 RPM 220V AC Swing Motor

Specification:-

• Operation Mode: Automatic
• Contact Current Rating: 10 Amps
• 220-240V Swing Motor Gear Motor
• 1 Channel Delay power relay module
• Clear LED display, easy to check the value

DC 12V 1 Channel RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Voltage: DC12V
• Current Rating: 10 Amps
• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

4 Channel Wireless Four Button RF Remote Control Receiver Module

Specifications:-

• Receiver operating voltage: DC 5V.
• Operating mode: Non-Locking
• Transmitter Operating voltage: DC 12V
• Transmission distance (m): 3 to 5
• Easy Integration

10A 125/250V 50/60Hz DC Automatic Reset Relay Fuse Current Overload Protector

Specifications:-

• Current Rating: 10A
• Voltage: 12V
• High-Amperage Compatibility
• Reliable Relay Fuse Design
• Simple Installation

100 Watt Mother Board/PCB of Inverter with Relay Module

Specification:-

• Power Rating: 100 Watts
• Power Source: DC
• Input Voltage: 12V DC (typical)
• Relay: High-current relay for reliable switching
• Dimensions: 105mm x 93mm (approx)

DC 12V Dual Channel Transmitter RF Relay Module with Remote Controller

Specification:-

• Channels: 2
• Voltage: DC12V
• Current Rating: 10 Amps
• Working frequency: 433MHz/315MHz
• Working temperature: -30°c+70°c
• Material: Plastic + Metal

5V 1 Channel Relay Module with High & Low Trigger Option

Specification:-

• Number of channels: 1
• Supply voltage: 3.75V to 5V
• Quiescent current: 2mA
• Trigger voltage: 5V
• Trigger current: 20mA
• Current when the relay is active: 70mA
• Relay maximum contact voltage: 250V AC or 30V DC
• Relay maximum current:  10A
• Product size: 50 x 25mm

DC 12V 2 Channel Transmitter RF Relay Module with Wireless Remote Control Switch

Specification:-

• Voltage: DC12V
• Channels: 2
• Current Rating: 10 Amps
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Control Lights, Motors, Fans, electrically operated.
• Push the remote button, LED flashes on and off.

DIY Combo Kit for Automatic Hand Sanitizer Dispenser | Includes IR Sensor | Relay | Water Pump

Specification:-

• Type: male to male
• 5V 1-channel relay module 
• IR Proximity Sensor
• 2.5mm x 100mm Black cable tie 
• 6V to 12V DC Mini underwater pump

Package Included:- 2 pcs Cable tie, 20 pcs Jumper Wire, 1 pcs Relay Module, 1 pcs IR Sensor, 1 pcs Underwater pump, 2 meter Pipe

Combo of Rain Detect Sensor for School Project with Jumper Wire|Water Pump & 5V Relay Module (43 Item)

Specification:-

• Working voltage: 6V to 12V
• Power current: 1.9A
• Max. flow : 50 liter/hour
• Distribution bit to adjust sensitivity
• 5V Relay Module – Enables seamless control of electrical devices based on sensor input.

Package Included:- 1 pcs 5V Relay Module, 1 pcs water pump, 1 pcs Rain detect Sensor, 40 pcs Female to Female Jumpere wire

Combo of LM393 LDR Sensor with 12V 2- Channel Relay Module & 40 Pcs Jumer wire (47 Item)

Specification:-

• Number of channels : 2
• Operating voltage : 12V
• Max. current : 20mA
• 40 Jumper Wires – Provides the necessary connections for easy circuit assembly.
• LM393 LDR Sensor – Detects light levels and triggers responses based on light intensity.

Package Included:- 2 Pcs 9V battery, 2 Pcs battery clip connector, 1 Pcs LDR Sensor Module, 1 Pcs 5V Buzzer, 1 Pcs 12V Relay Module, 40 Pcs Female to Female Jumper wire

DC12V 315MHz 4-CH RF Wireless Relay Module with Remote Controller (White)

Specification:

• Frequency: 315MHz RF
• Operating Voltage (Relay): DC 12V
• Standby Current: 10mA
• Remote Distance: 20-200m
• Relay Channels: 4CH (4 independent relays)
• Remote Control: Approx. 6.8 x 3.8 x 1.5cm/2.7 x 1.5 x 0.6 inch
• Remote Switch : Approx. 7.5 x 5.5 x 2.6cm/3 x 2.2 x 1 inch

High Current Active Alarm Buzzer Driver Module

Specification:-

1. Better than passive buzzer modules
2. Operating voltage:  3.3V - 5V
3. Fixed bolt holes for easy installation
4. Programmable and easy to control
5. This module is driven by an S8550 triode

CD40109 CMOS Quad Low-to-High Voltage Level Shifter IC (DIP-16 Package)

Specification:-

• Noise Margin (Full Package-Temperature Range):
• 1 V at VCC = 5 V, VDD = 10 V
• 2 V at VCC = 10 V, VDD = 15 V
• 5-V, 10-V, and 15-V Parametric Ratings
• 1 µA at 18 V Over Full Package-Temperature Range
• 100 nA at 18 V and 25°C
• 100% Tested for Quiescent Current at 20 V

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 10pcs

Specification:-

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power:  10W+10W
4. Chip name:  PAM8610
5. Efficiency:  90%
6.  Frequency response:  20Hz to 50KHz

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier modules pack of 10pcs

Specification

1. Operating voltage:  12V to 24V
2. Output Power:  30W+30W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Supply current  :  more than 3A

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier modules pack of 50pcs

Specification

1. Operating voltage:  12V to 24V
2. Output Power:  30W+30W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Supply current  :  more than 3A

PAM8403 - GF1002 3W+3W Dual channel audio amplifier boards with switch potentiometer pack of 50pcs

Specification:

• New and branded quality product
• Dual channel
• Power output:  3W+3W
• Operating voltage:  2.5V to 5.5V
• Recommended voltage:  5V
• Excellent sound quality
• On-board switch potentiometer

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 50pcs

Specification

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power  :  10W+10W
4. Chip name  :  PAM8610
5. Efficiency  :  90%
6.  Frequency response  :  20Hz to 50KHz

IRFI630A 200V 9A N-channel Power Mosfet

Specifications

1. Type : N - channel
2. Drain-to-Source breakdown voltage : 200 V
3. Gate-to-Source voltage, max : ±20 V
4. Drain-source On-state resistance, max : 0.400 Ohm
5. Continuous drain current : 9A
6. Total gate charge : 43 nC
7. Power dissipation : 74 W

IRF520 100V 9.2A N-channel Power Mosfet

Specifications

1. Type: N-Channel
2. Drain-Source Volt (Vds) : 100V
3. Drain-Gate Volt (Vdg) : 100V
4. Gate-Source Volt (Vgs) : 20V
5. Drain Current (Id) : 10A
6. Power Dissipation (Ptot): 70W

PAM8610 10W+10W Two channel audio stereo amplifier modules pack of 10pcs

Specification:-

1. Operating voltage  :  7V to 15V (12V is suitable)
2. Current Rating : 2.5Amp
3. Power rating:  10W + 10W
4. Working Mode:  Class - D
5. Chip name:  PAM8610
6. Mute switch functionality
7. Low noise power amplifier
8. It does not require a heatsink

2N7000 60V 200mA N-channel Power Mosfet pack of 2pcs

Specifications

1. Transistor polarity: N-channel
2. Drain source voltage Vds: 60V
3. Continuous drain current: 200mA
4. Mounting: through hole
5. Power dissipation: 400mW
6. Resistance: 5 ohms (Ω)
7. Package includes: 2 pieces