ACS712 - 5A range Current detector Sensor Module

Specifications:-

1. Module Dimensions: 31 x 13 x 14 mm (LxWxH)
2. Weight: 3 gm.
3. Supply Voltage: 4.5V~5.5V DC
4. Measure Current Range: -5A~ 5A
5. Sensitivity: 66mV/A
6. The current sensor chips: ACS712_ELC-05B.
7. Pin 5V power supply, on-board power indicator.

LM3915 Logarithmic LED dot or bar display driver 18 pins IC pack of 50pcs

Specification

1. Analog controlled LED driver IC with logarithmic output
2. Operating Voltage :  3V to 25V
3. Reference Voltage :  1.2V to 12V
4. Power dissipation : 1365 mW
5. Number of pin : 18
6. Number of controllable LED's : 10
7. Drives LEDs, LCDs, or Vacuum Fluorescents

ACS712 - 20A range current detection sensor module

Specifications:-

• Measures both AC and DC current
• Provides isolation from the load
• Easy to integrate with MCU, since it outputs analog voltage
• Scale factor : 100mV/Amp

ACS712 - 30A range current detection sensor module

Specifications:-

• Measures both AC and DC current
• Provides isolation from the load
• Easy to integrate with MCU, since it outputs an analog voltage
• Scale factor : 66mV per Amp

ACS712 - 10A range current detection sensor module

Specifications:-

• Measures both AC and DC current
• Provides isolation from the load
• Easy to integrate with MCU, since it outputs an analog voltage
• Scale factor : 150mV/Amp

High Current Active Alarm Buzzer Driver Module

Specification:-

1. Better than passive buzzer modules
2. Operating voltage:  3.3V - 5V
3. Fixed bolt holes for easy installation
4. Programmable and easy to control
5. This module is driven by an S8550 triode

UC3843AN PWM current mode controller DIP 8 pin IC pack of 2pcs

Specification

1. PWM controller
2. Operating Voltage:  7V to 8V
3. Output pin current :  1A
4. Analog input range  :  -0.3V to 6.3V
5. Oscillation Frequency :  52 approx.
6. Gain value  :  3V
7. Maximum source current :  22mA

UC3843AN PWM current mode controller DIP 8 pins IC pack of 10pcs

Specification

1. PWM controller
2. Operating Voltage :  7V to 8V
3. Output pin current :  1A
4. Analog input range  :  -0.3V to 6.3V
5. Oscillation Frequency :  52 approx.
6. Gain value  :  3V
7. Maximum source current :  22mA

UC3843AN PWM current mode controller DIP 8 pins IC pack of 50pcs

Specification

1. PWM controller
2. Operating Voltage :  7V to 8V
3. Output pin current :  1A
4. Analog input range  :  -0.3V to 6.3V
5. Oscillation Frequency :  52 approx.
6. Gain value  :  3V
7. Maximum source current :  22mA

UC3845BN Current mode PWM controller DIP 8 pin IC pack of 2pcs

Specification

1. Input voltage  : 15V
2. Output voltage : 5V
3. Output current : 200mA
4. Controller IC case style :  DIP
5. Number of pins : 8 pins
6. Frequency range : 150 to 250 KHz

UC3845BN Current mode PWM controller DIP 8 pins IC pack of 10pcs

Specification

1. Input voltage: 15V
2. Output voltage: 5V
3. Output current: 200mA
4. Controller IC case style:  DIP
5. Number of pins: 8 pins
6. Frequency range: 150 to 250 KHz

UC3845BN Current mode PWM controller DIP 8 pins IC pack of 50pcs

Specification

1. Input voltage: 15V
2. Output voltage: 5V
3. Output current : 200mA
4. Controller IC case style :  DIP
5. Number of pins : 8 pins
6. Frequency range : 150 to 250 KHz

UC3842AN Current mode PWM controller DIP 8 pin IC pack of 2pcs

Specification

1. Input voltage  : 30V
2. Output voltage : 5V
3. Output current : 1A
4. Number of pins : 8 pins
5. Frequency range : 500 KHz

UC3842AN Current mode PWM controller DIP 8 pins IC pack of 10pcs

Specification

1. Input voltage  : 30V
2. Output voltage : 5V
3. Output current : 1A
4. Number of pins : 8 pins
5. Frequency range : 500 KHz

UC3842AN Current mode PWM controller DIP 8 pins IC pack of 50pcs

Specification

1. Input voltage  : 30V
2. Output voltage : 5V
3. Output current : 1A
4. Number of pins : 8 pins
5. Frequency range : 500 KHz

XTR105P 4 to 20mA Current transmitter with Sensor excitation and linearization DIP 14 pin IC

Specification

1. Supply voltage range : 7.5V to 36V
2. IC type : Current transmitter
3. Current supply : 20mA
4. Interface : 3 wire
5. Two precision current source
6. Low offset drift
7. Low output current noise

DT830D Digital multimeter for measuring AC and DC voltage, DC current and resistance with LCD display

Specification :-

• Best and the latest product
• Meter type: Digital
• Reliable and easy to use
• Low battery indicator
• Overload protection

Measurement Ranges:

MAS830L Digital multimeter for measuring AC and DC voltage, DC current and resistance with LCD display

Specification :-

• Best and the latest product
• Meter type : Digital
• Reliable and easy to use
• Low battery indicator
• Overload protection

Measurement Ranges:

DT9205A Digital multimeter for measuring AC and DC voltage, AC and DC current, capacitance and resistance

Specification:-

• Best and the latest product
• Meter type : Digital
• Reliable and easy to use
• Low battery indicator

Measurement Ranges:

DT266 Digital clamp multimeter for measuring AC and DC voltage, AC current and resistance with LCD display

Specification:-

1. Best and the latest product
2. Meter type : Digital
3. AC voltage measurement : 750V
4. DC voltage measurement : 1000V
5. AC current measurement : 200A to 1000A
6. Resistance measurement : 200Ω to 20K
7. Reliable and easy to use
8. Low battery indicator
9. Overload protection

HIP4082 80V 1.25A peak current H-bridge FET driver 16 pin IC pack of 2pcs

Specification

1. Supply voltage: 8.5V to 16V
2. Phase slew rate: 20V/ns
3. Operating current: 4A
4. Independently drives 4 N-Channel FET in half-bridge
5. Drives 1000pF load in free air at 50°C

HIP4082 80V 1.25A peak current H-bridge FET driver 16 pins IC pack of 10pcs

Specification

1. Supply voltage : 8.5V to 16V
2. Phase slew rate : 20V/ns
3. Operating current : 4A
4. Independently drives 4 N-Channel FET in half-bridge
5. Drives 1000pF load in free air at 50°C

HIP4082 80V 1.25A peak current H-bridge FET driver 16 pins IC pack of 50pcs

Specification

1. Supply voltage: 8.5V to 16V
2. Phase slew rate: 20V/ns
3. Operating current : 4A
4. Independently drives 4 N-Channel FET in half-bridge
5. Drives 1000pF load in free air at 50°C

12V 2.4W Bright blue color waterproof LED modules pack of 100pcs

Specification

1. Operating voltage: 12V
2. Emerging color: Blue
3. Power rating : 2.4Watt
4. Dimensions of the module : 70mm x 18mm (L x B)
5. LED junction temperature : 125°C

5V 6 channel relay module with light coupling

Specification:-

1. Number of channels : 6
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

50V to 500V 0-100A AC flush panel mount Digital voltage and ampere meter LED Indicator light with Universal current detector

Specifications

1. Digital display for voltage and ampere indication
2. Operating voltage : 50V to 500V AC
3. Operating current : 0A to 100A
4. Viewing angle : 30° to 110°
5. Emerging color : RED
6. Life expectancy : 1,00,000 hours
7. Precise and smart design

12V DC 250V AC 16A 6 Terminal NO HF115F-I/012-1HS3A Switching current PCB panel mount power relay pack of 1pcs

Specifications

1. Rated voltage : 250V AC
2. Max. switching voltage : 400V AC
3. Rated current : 16A
4. Limiting continuous current : 12A
5. Operate/release time max. : 8/6ms

12V DC 250V AC 16A 6 Terminal NO HF115F-I/012-1HS3A Switching current PCB panel mount power relay pack of 5pcs

Specifications

1. Rated voltage : 250V AC
2. Max. switching voltage : 400V AC
3. Rated current : 16A
4. Limiting continuous current : 12A
5. Operate/release time max. : 8/6ms

12V DC 250V AC 16A 6 Terminal NO HF115F-I/012-1HS3A Switching current PCB panel mounts power relay pack of 10pcs

Specifications

1. Rated voltage : 250V AC
2. Max. switching voltage : 400V AC
3. Rated current : 16A
4. Limiting continuous current : 12A
5. Operate/release time max. : 8/6ms

120V AC to 24V DC 2A 6 Terminal LT2S-12VDC-T Subminiature DPDT PCB panel mount power relay pack of 5pcs

Specifications

1. Operating voltage : 12V to 24V DC
2. Maximum voltage : 120V AC
3. Max. operating voltage : 2A
4. Supply current : 0.2A
5. 2 Form C configuration.
6. Bifurcated contacts.
7. Epoxy-sealed.

YX-360TR Multi-tester AC/DC voltage current resistance decibel fuse and diode protection meter tool for Non-magnetic electronic level

Specification

1. Best and the latest product
2. AC voltage measuring range: 10V to 1000V
3. DC voltage measuring range : 10V to 1000V
4. DC current measuring range : 0.25µA to 100µA
5. Reliable and easy to use
6. Overload protection

4.7K ohm 0805 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 0805
2. Resistance : 4.7K ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

20V 0.5 watt BZ X55O20VST Zener diode pack of 2500 pcs

Specifications

• Zener Impedance (Zzt) : 55 Ω
• Diode Configuration : single
• Power Dissipation : 0.5 W
• Zener Voltage (Nom) : 20 V
• Power Dissipation : 500 mW
• Current : 25 mA

TO-92 TL431 (Vref-36) Power Supply Control IC Pack of 5pcs

Specification:-

• Adjustable output voltage: Vref to 36 V
• Sink-current capability: 1 mA to 100 mA
• Operation from −40°C to 125°C
• Low Output Noise

DO-201AD, FR306 800V Fast Recovery Rectifiers Diode pack of 5pcs

Specification 

1. Maximum respective peak reverse voltage : 800v
2. Maximum average rectified current : 3.0A
3. Maxim reverse current : 5.0µA
4. Case :  DO-201AD
5. Non-Repetitive Peak Forward Surge Current : 200A
6. Operating Junction Temperature Range : − 65 to +150°C 
7. Maxim forward voltage : 1.3V
8. Maximum reverse recovery time  500ns

BA157 400V ,DO-41 Fast Recovery Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 400V
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 150ns
• Package : DO-41

BA159 1000V ,DO-41 Fast Recovery Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 1000V
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 500ns
• Package : DO-41

100A Spot Welding Machine DIY Controller Panel Time and Current Control Function with Digital Display

Specification

1. Opto isolation of power and control circuits
2. Adjust the response time with a simple potentiometer
3. Maximum Triac current 100A
4. The digital control interface displays the current time and current settings.
5. Power board 9-12v (AC)
6. Size: 55 x 75 mm / 33 x 35 mm

50V to 500V 0-100A AC Digital voltage and ampere meter Blue LED Indicator light with Universal current detector

Specifications

• Digital display for voltage and ampere indication
• Operating voltage : 50V to 500V AC
• Operating current : 0A to 100A
• Viewing angle : 30° to 110°
• Emerging color : Blue
• Life expectancy : 1,00,000 hours
• Precise and smart design

50V to 500V 0-100A AC Digital voltage and ampere meter Green LED Indicator light with Universal current detector

Specifications

• Digital display for voltage and ampere indication
• Operating voltage : 50V to 500V AC
• Operating current : 0A to 100A
• Viewing angle : 30° to 110°
• Emerging color : Green
• Life expectancy : 1,00,000 hours
• Precise and smart design

50V To 500V 0-100A AC Digital Voltage and Ampere Meter Orange LED Indicator Light with Universal Current Detector

Specifications

• Digital display for voltage and ampere indication
• Operating voltage : 50V to 500V AC
• Operating current : 0A to 100A
• Viewing angle : 30° to 110°
• Emerging color : Orange
• Life expectancy : 1,00,000 hours
• Precise and smart design

50V To 500V 0-100A AC Digital Voltage and Ampere Meter White LED Indicator Light with Universal Current Detector

Specifications

• Digital display for voltage and ampere indication
• Operating voltage : 50V to 500V AC
• Operating current : 0A to 100A
• Viewing angle : 30° to 110°
• Emerging color : White
• Life expectancy : 1,00,000 hours
• Precise and smart design

220V 0-100A AC Round shape Digital Ampere Meter Red LED Indicator Light with Universal Current Detector

Specifications

• Digital display for voltage and ampere indication
• Operating voltage : 220V AC
• Viewing angle : 30° to 110°
• Emerging color : Red
• Life expectancy : 1,00,000 hours
• Precise and smart design

15A 125/250V 50/60Hz DC Automatic Reset Relay Fuse Current Overload Protector

Specifications:-

• Current Rating: 15A
• Voltage: 12V
• High-Amperage Compatibility
• Reliable Relay Fuse Design
• Simple Installation

4S 30A 14.4V 14.8V 16.8V Current Li-ion Lithium Battery 18650 BMS Charger Protection Board Batteries Protecting Module

Specifications:-

• Model number: 4S30ABMS
• Battery: 4 Cell
• Over Current: 20 ~ 30A
• Working Current: 15A
• Item Dimensions : 13 x 8 cm

DIY Combo Kit | Solar |Dynamo Motor & Windmill Motor with Fan Pulley Set (14 Items)

Specification:-

• Operating voltage: 3-9v DC
• Educational Resource
• DIY Project Kit
• Excellent working mechanism
• Dynamo powerful motor and generator in one

Kit includes: 2 pcs Motor, 1 pcs Big Motor, 2 different propeller fan, 3 different size pulley, 2 elastics, and 5 LEDs

PMBT2907A 600mA PNP Transistors 40V (SOT-23 Package) Pack of 10

Specification:-

• Type of transistor: PNP
• Collector-Emitter Voltage, max:  40 V
• Collector-Base Voltage, max: 60 V
• Power Dissipation: 250 mW
• Transition Frequency, min: 200 MHz
• Operating and Storage Junction Temperature Range: -65 to +150 °C
• Package: SOT-23

PMBT2907A 600mA PNP Transistors 40V (SOT-23 Package) Pack of 3000

Specification:-

• Type of transistor: PNP
• Collector-Emitter Voltage, max:  40 V
• Collector-Base Voltage, max: 60 V
• Power Dissipation: 250 mW
• Transition Frequency, min: 200 MHz
• Operating and Storage Junction Temperature Range: -65 to +150 °C
• Package: SOT-23

30 Amp Zatka Machine Ct (Current Transformer) Coil

Specifications:-

• Output Voltage: 1.2 Volts
• Secondary Current: 8 mA.
• Current Range: 30
• Frequency: 50 Hz
• High-Quality Construction
• Sensitivity and Accuracy
• Easy Installation

LM317L Low Current Three Terminal Adjustable Positive Voltage Regulator Pack of 10

Specification:-

• Output Current over 100 mA
• Output Adjustable Between 1.2 V and 37 V
• Standard 3−Lead Transistor Package
• Eliminates Stocking Many Fixed Voltages
• Internal Thermal Overload Protection

10A 125/250V 50/60Hz DC Automatic Reset Relay Fuse Current Overload Protector

Specifications:-

• Current Rating: 10A
• Voltage: 12V
• High-Amperage Compatibility
• Reliable Relay Fuse Design
• Simple Installation

GSR Galvanic Skin Response Module Current Sensor Kit V2.0

Specifications:-

• Input Voltage: 3.3-5V
• Working Current: 1mA
• Output Signal: Analog voltage corresponding to skin conductance
• Electrodes: Reusable, easy-to-attach skin electrodes
• Interface: Analog output to microcontroller ADC 

5A 12V Overcurrent Protection AC Current Detection Sensor Module

Specification :-

• Output mode: Switch signal output
• Operating voltage: DC12V
• Operating current: <20MA
• The current detection range: AC 0.3A-5A
• Operating frequency range: 20Hz ~ 400Hz

LVR040 240V 400mA Tyco Raychem PPTC Resettable Fuse

Specification:-

• Maximum operating voltage of 240VAC
• Maximum interrupt voltage of 265VAC
• Hold currents from 50mA – 550mA
• UL, CSA, and TÜV (IEC) recognised
• Low off state resistance 

SCT-013 30A/1V AC Split Core Current Transformer

Specification:-

• Rated output: 1V
• Input Current: 30A
• Output Mode: 0-1V @ 30mA
• Frequency: 50HZ-150KHZ
• Operating Temperature: -25 ~ 70°C

ZOYI ZT-QB1 4000 Counts Digital Clamp Multimeter Inrush Current & 600A AC Current with Peak Hold Voltage

Specification :-

ZOYI ZT-QB3 4000 Counts Digital Clamp Multimeter 600A AC Current with Flashlight & Backlight

Specification:-

ZOYI ZT-QB4 4000 Counts Digital Clamp Multimeter 600A AC Current with Flashlight & Backlight

Specification:-

ZOYI ZT-QS4 T-RMS 4000 Counts Digital Clamp Multimeter 600A AC Current

Specification:-

ZOYI ZT-QS9 T-RMS 6000 Counts Digital Clamp Multimeter 600V AC/DC Current 600A

Specification:-

ZT-301 8000 Counts Digital Multimeter with Microcurrent & Temperature

Specification:-

ZOYI ZT-S1+ 4000 Counts Professional DC/AC Voltage Current Tester Digital Multimeter

Specification:-

• Item Type: Multimeter
• Frequency:  40HZ-1KHZ
• AC/DC current: 9.999A
• Display Count: 4000 Counts
• Temperature: -20℃~60℃
• AC Voltage: 4V / 40V / 400V / 600V
• Voltage: 4V / 40V / 400V / 600V
• AC Current: 999.9mA / 9.99A
• Current: 999.9mA / 9.99A

ZT-300AB 6000 Bluetooth App Smart Mode Digital Multimeter with Microcurrent & Temperature

Specification:-

• Voltage: AC 750V/ DC 1000V
• Current: AC 10A/ DC 10A
• Resistance: 60.00MΩ: ±(1.5%+3)
• Temperature: -20℃~1000℃ ±(2.5%+5）
• DC Voltage: 60.00mV/600.0mV/6.000V/60.00V/600.0V/1000V  ±(0.5%+3)
• AC Voltage: 60.00mV/600.0mV/6.000V/60.00V/600.0V/750V  ±(1.0%+3)
• DC Current: 600.0μA/6000μA/60.00mA/600.0mA/6.000A/10.00A  ±(1.2%+3)
• AC Current: 600.0μA/6000μA/60.00mA/600.0mA/6.000A/10.00A  ±(1.5%+3)

TD62083 4-Channel High-Current Darlington Sink Driver SMD IC

Specification:-

• Output current (single output) 1.5 A (max)
• High sustaining voltage output 50 V (min)
• Output clamp diodes
• Input compatible with TTL and 5 V CMOS
• GND terminal = Heat sink
• Package type-AFG: HSOP-16 pin

AD694 4-20mA Monolithic Current Transmitter IC

Specification:-

• Supply Voltage: 36 V
• VS to IOUT: 36 V
• Input Voltage: –0.3 V to +36 V
• Reference Short Circuit to Common: Indefinite
• 4 mA On/Off: 0 V to 36 V
• Lead Temperature: 300°C
• Storage Temperature Range: −65°C to +150°C

UC3844 Current Mode PWM Controller IC DIP-8

Specification:-

• Current-Mode PWM controller
• Operating Voltage: 12V to 28V
• Output pin current: 200 mA
• Switching Frequency: 500 kHz
• Duty Cycle - Max: 100 %
• Operating Supply Current:25 mA
• Optimized for Off-line and DC-to-DC Converters

UC3844 SOP-8 Current Mode PWM Controller SMD IC

Specification:-

• Operating Frequency: 500 kHz
• Low Start Up Current
• Maximum Duty Clamp
• UVLO with Hysteresis
• Fixed Frequency Current-Mode PWM Controller

LE-VAP 63A 230V Dual Display Voltage Current Protector with Auto Re-connect LED Display

Specification:-

• Model Name: LE-VAP 63A
• Voltage Rating: 220 VAC
• Under Volage: 80V TO 210V
• Over Voltage: 130V to 300V
• Current Capacity: 63A
• On Delay: Adjustable up to 999 Seconds

19mm High Current Latching Push Button Switch | Waterproof IP67 | Mechanical | 3-Pin

Specification:-

• Model no. HBDS1-D19C-11Z/J/S
• Operating Voltage: 220V
• Mounting Hole Size: 19mm
• Operation Type: Latching
• Waterproof: IP67
• Terminals: Pin terminal
• Durable and Waterproof Design

30mm High Current Latching Push Button Switch | Waterproof IP67 | Mechanical | 5-Pin

Specification:-

• Model no. HBDSl-AGQ30F-11ETZ/J/S/24V/R
• Operating Voltage: 24V
• Mounting Hole Size: 30mm
• Waterproof: IP67
• Terminals: Pin terminal
• Durable and Waterproof Design