DM74LS373WMX D-Type Transparent Latch 1 Channel 8:8 IC Tri-State 20-SOIC

Specification:-

• Package: SOIC20 (0.295", 7.50mm)
• Polarity: Non-Inverting
• Number of Circuits: 1 Circuit
• Propagation Delay Time: 27 ns at 5 V
• High Level Output Current: - 2.6 mA
• Supply Voltage - Min: 4.75 V
• Supply Voltage - Max: 5.25 V

DM74LS573N D-Type Transparent Latch 1 Channel 8:8 IC Tri-State 20-PDIP

Specification:-

• Package: PDIP20 (0.300", 7.62mm) 
• Polarity: Non-Inverting
• Propagation Delay Time: 27 ns at 5 V
• High Level Output Current: - 2.6 mA
• Supply Voltage - Min: 4.75 V
• Supply Voltage - Max: 5.25 V

74ACT373SCX D-Type Transparent Latch 1 Channel 8:8 IC Tri-State 20-SOIC

Specification:-

• Package: SOIC20 (0.295", 7.50mm)
• Polarity: Inverting
• Propagation Delay Time: 10 ns at 5 V
• High Level Output Current: -24 mA
• Supply Voltage - Min: 4.75 V
• Supply Voltage - Max: 5.25 V

74FCT573ATP D-Type Transparent Latch 1-Channel 8:8 IC Tri-State 20-PDIP

Specification:-

• Package: PDIP20 (0.300", 7.62mm) 
• Device Type: 8-bit D-type
• IC Type: Latch 
• Tri-State Outputs
• Low-Power Consumption

74ACT563SCX D-Type Transparent Latch 1 Channel 8:8 IC Tri-State 20-SOIC

Specification:-

• Package: SOIC20 (0.295", 7.50mm)
• Polarity: Inverting
• Propagation Delay Time: 11.5 ns at 5 V
• High Level Output Current: 24 mA
• Supply Voltage - Min: 4.75 V
• Supply Voltage - Max: 5.25 V

74ACT373SC D-Type Transparent Latch 1 Channel 8:8 IC Tri-State 20-SOIC

Specification:-

• Package: SOIC20 (0.295", 7.50mm)
• Polarity: Non-Inverting
• Number of Circuits: 8 Circuit
• Propagation Delay Time: 10 ns at 5 V
• High Level Output Current: - 24 mA
• Supply Voltage - Min: 4.75 V
• Supply Voltage - Max: 5.25 V

74HC573 Octal D-Type Transparent Latch SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage: 2 to 6V
• Supply Voltage: − 0.5 to + 7.0V
• Output Current: ± 35 mA
• Typical tpd = 21 ns
• Operating Temperature: 65°C to 150°C

GD4044B S-R Latch 4 Channel 1:1 IC Tri-State 16-PDIP

Specification:-

• Package: PDIP16 (0.300", 7.62mm)
• No. of Pins: 16
• Supply Voltage-Max (Vsup): 5.5 V
• Supply Voltage-Min (Vsup): 4.5 V
• Supply Voltage-Nom (Vsup): 5 V

CD4044BE S-R Latch 4 Channel 1:1 IC Tri-StateLogic IC 16-PDIP

Specification:-

• Package: PDIP16 (0.300", 7.62mm)
• Quiescent Current: 20 uA
• Low Level Output Current: 32 mA
• High Level Output Current: - 4.2 mA
• Supply Voltage - Min: 3 V
• Supply Voltage - Max: 18 V

74HC573 Octal D-Type Transparent Latch IC DIP-20 Package

Specification:-

• Number of pins: 20
• Mounting: Through Hole
• Wide operating voltage range: 2V–6V
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Input Voltage (VIN):  −1.5V to VCC + 1.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 600 mW
• Operating Temperature (°C): − 65°C to + 150°C

74LS125 Quad Tri-State Buffer IC DIP-14 Package

Specification:-

• Number of pins: 14
• Supply Voltage (VCC: 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C
• Storage temperature range: -65°C to +150°C
• Standard TTL Switching Voltages

74HC244 Octal Buffer/Line Driver with Tri-State Output SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage: 7V
• Input Voltage: 7V
• Typical propagation delay: 12 ns
• Typical operating frequency: 50 MHz
• Temperature Range: -65°C to 150°C
• Typical IOL (sink current) 24 mA
• Typical IOH (source current) −15 mA

CD4043 Quad NOR R-S Latch Tri-state IC (DIP-16 Package)

Specification:-

• Supply Voltage (VDD): −0.5V to +18V
• Input Voltage (VIN):  −0.5V to VDD +0.5V
• Storage Temperature Range (TS):  −65°C to +150°C
• Power Dissipation (PD) Dual-In-Line: 700 mW
• Lead Temperature (TL): 260°C

CD4043 Quad NOR R-S Latch Tri-state SMD IC

Specification:-

• Maximum input current of 1µA at 18V
• NOR and NAND configurations
• Standardized symmetrical output characteristics
• 3-state outputs with common output enable
• 100% Tested for quiescent current at 20V

12V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier module pack of 1pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power  :  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

5V 1 channel relay module compatible with 5V microcontroller

Specification:-

1. Number of channels: 1
2. Supply voltage: 3.75V to 6V
3. Quiescent current: 2mA
4. Trigger voltage: 5V
5. Trigger current: 20mA
6. Current when the relay is active: 70mA
7. Relay maximum contact voltage: 250V AC or 30V DC
8. Relay maximum current:  10A

12V 2 channel relay module with light coupling

Specification:-

1. Number of channels : 2
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 10pcs

Specification:-

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power:  10W+10W
4. Chip name:  PAM8610
5. Efficiency:  90%
6.  Frequency response:  20Hz to 50KHz

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 50pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier modules pack of 10pcs

Specification

1. Operating voltage:  12V to 24V
2. Output Power:  30W+30W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Supply current  :  more than 3A

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier modules pack of 50pcs

Specification

1. Operating voltage:  12V to 24V
2. Output Power:  30W+30W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Supply current  :  more than 3A

PAM8403 - GF1002 3W+3W Dual channel audio amplifier boards with switch potentiometer pack of 50pcs

Specification:

• New and branded quality product
• Dual channel
• Power output:  3W+3W
• Operating voltage:  2.5V to 5.5V
• Recommended voltage:  5V
• Excellent sound quality
• On-board switch potentiometer

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 10pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 50pcs

Specification

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power  :  10W+10W
4. Chip name  :  PAM8610
5. Efficiency  :  90%
6.  Frequency response  :  20Hz to 50KHz

IRF540 100V 33A N-channel HEXFET Power Mosfet

Specifications

1. Type : Small signal N-Channel MOSFET
2. Continuous drain current : 33A at 25°C
3. Pulsed drain current : 110A
4. Minimum gate threshold voltage : 2V
5. The maximum gate threshold voltage : 4V
6. Gate source voltage : ±20V
7. Maximum drain-source voltage : 100V

IRFI630A 200V 9A N-channel Power Mosfet

Specifications

1. Type : N - channel
2. Drain-to-Source breakdown voltage : 200 V
3. Gate-to-Source voltage, max : ±20 V
4. Drain-source On-state resistance, max : 0.400 Ohm
5. Continuous drain current : 9A
6. Total gate charge : 43 nC
7. Power dissipation : 74 W

IRF840 500V 8A N-channel Power Mosfet

Specification:-

1. N-Channel Power MOSFET
2. Continuous drain current : 8A
3. Gate threshold voltage : 10V (limit = ±20V)
4. Drain to source breakdown voltage: 500V
5. Drain source resistance : 0.85 Ohms
6. Rise time and fall time : 23nS and 20nS

IRF520 100V 9.2A N-channel Power Mosfet

Specifications

1. Type: N-Channel
2. Drain-Source Volt (Vds) : 100V
3. Drain-Gate Volt (Vdg) : 100V
4. Gate-Source Volt (Vgs) : 20V
5. Drain Current (Id) : 10A
6. Power Dissipation (Ptot): 70W

TPA3110 30W Mono (single) channel digital power amplifier modules pack of 50pcs

Specification

1. Chip name:  TPA3110
2. Working Voltage:  8V to 26 V DC
3. Output Power  :  30W
4. Applicable Speaker Impedance  :  8 Ω is perfect but 4/6 is also good
5. Single-channel digital power amplifier
6. Sound quality is also very good

TPA3110 30W Mono (single) channel digital power amplifier modules pack of 10pcs

Specification

1. Chip name:  TPA3110
2. Working Voltage:  8V to 26 V DC
3. Output Power  :  30W
4. Applicable Speaker Impedance  :  8 Ω is perfect but 4/6 is also good
5. Single-channel digital power amplifier
6. Sound quality is also very good

PAM8610 10W+10W Two channel audio stereo amplifier modules pack of 10pcs

Specification:-

1. Operating voltage  :  7V to 15V (12V is suitable)
2. Current Rating : 2.5Amp
3. Power rating:  10W + 10W
4. Working Mode:  Class - D
5. Chip name:  PAM8610
6. Mute switch functionality
7. Low noise power amplifier
8. It does not require a heatsink

2N7000 60V 200mA N-channel Power Mosfet pack of 2pcs

Specifications

1. Transistor polarity: N-channel
2. Drain source voltage Vds: 60V
3. Continuous drain current: 200mA
4. Mounting: through hole
5. Power dissipation: 400mW
6. Resistance: 5 ohms (Ω)
7. Package includes: 2 pieces

TPA3110 2x15W Dual channel stereo audio power amplifier modules pack of 10pcs

Specification

1. Operating voltage:  8V to 18V
2. Output Power:  15W+15W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Signal to noise ratio  :  100DB
7. Supply current  :  more than 3A

TPA3110 2x15W Dual channel stereo audio power amplifier modules pack of 50pcs

Specification

1. Operating voltage:  8V to 18V
2. Output Power:  15W+15W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Signal to noise ratio  :  100DB
7. Supply current  :  more than 3A

TPA3116 Dual channel stereo 2 x 50W audio amplifier circuit modules pack of 10pcs

Specification

1. Dual channel
2. Output power:  50W+50W
3. New filter less design
4. Excellent sound quality
5. Operating voltage  :  12V to 24V
6. Current handling capacity  :  3A
7. IC name  :  TPA3116
8. Can easily drive small speakers

PAM8610 10W+10W Two channel audio stereo amplifier modules pack of 50pcs

Specification

1. Operating voltage  :  7V to 15V (12V is suitable)
2. Current Rating : 2.5Amp
3. Power rating:  10W + 10W
4. Working Mode  :  Class - D
5. Chip name  :  PAM8610
6. Mute switch functionality
7. Low noise power amplifier
8. Does not require a heatsink

PAM8403 - GF1002 3W+3W Dual channel audio amplifier boards with switch potentiometer pack of 10pcs

Specification

1. New and branded quality product
2. Dual channel
3. Power output  :  3W+3W
4. Operating voltage  :  2.5V to 5.5V
5. Recommended voltage  :  5V
6. Excellent sound quality
7. On board switch potentiometer

TPA3118 60W Mono (single) channel digital power amplifier modules pack of 50pcs

Specification

1. Operating Voltage:  4.5V to 24V DC
2. Multiple Switching Frequencies
3. Short circuit protection
4. Stereo and Mono Mode
5. Master and Slave Synchronization
6.  Single-Filter Mono Configuration

TPA3118 60W Mono (single) channel digital power amplifier modules pack of 10pcs

Specification

1. Operating Voltage:  4.5V to 24V DC
2. Multiple Switching Frequencies
3. Short circuit protection
4. Stereo and Mono Mode
5. Master and Slave Synchronization
6.  Single-Filter Mono Configuration

6 channel DC LED chaser with adjustable speed pack of 1pcs

PRODUCT SPECIFICATIONS:-

• Led chaser circuit with 6 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice project.

10 channel DC LED chaser with adjustable speed

Specifications:-

• Led chaser circuit with 10 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice projects.

TDA7388 4 Channel Quad bridge car radio amplifier 25 pin IC pack of 2pcs

Specification:-

1. Operating supply voltage : 18V
2. Output peak current : 4.5A
3. Output power : 41 watt
4. Power dissipation : 80 watt
5. Output offset voltage : 80mV
6. Voltage gain : 27dB
7. Number of channel : 4

6 channel AC LED chaser pack of 1pcs

Specification:-

• Operating voltage: 180V to 220V
• Each channel is 20 Watt Operating
• Led chaser circuit with 6 led outputs
• Variable frequency.
• Best for making electronic projects.
• Ideal for making LED projects.

TPA3116 Dual channel stereo 2 x 50W audio amplifier circuit modules pack of 50pcs

Specification

1. Dual channel
2. Output power:  50W+50W
3. New filter less design
4. Excellent sound quality
5. Operating voltage  :  12V to 24V
6. Current handling capacity  :  3A
7. IC name  :  TPA3116
8. Can easily drive small speakers

PAM8406 5Wx2 dual channel stereo Mini digital amplifier modules with volume control preset pack of 10pcs

Specification

1. Working voltage:  5V
2. Output power:  5W+5W
3. Dual channel stereo
4. High sound quality
5. Excellent noise suppression system
6. Can drive 4 and 8 omega speakers easily
7. Left and Right volume controller

BFD-1000 5 channel line follower sensor module

Specifications:-

1. Detecting distance: 0-4cm (black line sensor) 0-5cm (adjustable distance detection)
2. Input voltage: 3.0-5.5V
3. Output Type: Digital output (high and low)

TTP229 - 16 Channel capacitive touch sensor module

Specifications:-

1. Onboard TTP229 capacitive touch sensor
2. Operating voltage 2.4V~5.5V.
3. Built-in regulator.
4. Operating current = 3V no load.
5. At fast mode typical 9.0uA
6. The response time about 100mS at fast mode, 200mS at low power mode

CD4053BE Triple 2 channel analog multiplexer DIP 16 pin IC pack of 2pcs

Specification

1. Wide range of digital and analog signal levels
   1. Digital : 3 V to 20V
   2. Analog : ≤ 20V_P-P
2. Gain bandwidth : 30MHz
3. Current leakage : 100nA
4. Channel to channel matching : 5Ω (ohm)
5. On state resistance : 240 Ω ( ohm )

50K dual gang rotary potentiometer round shaft handle 6 pin pack of 2pcs

Specification:-

1. Type: dual-gang rotary potentiometer
2. Resistance value: 50K
3. Power rating: 0.3W
4. Shaft: 7 mm round shaft
5. Maximum Input Voltage:  200Vdc
6. Rotational Life:  2000K cycles

TDA2009 Dual channel 10W + 10W stereo amplifier 11 pin IC pack of 2pcs

Specification

1. Supply operating voltage: 8V to 28V
2. Output power per channel: 10W
3. Input resistance: 200KΩ
4. Peak output current: 3.5A
5. Power dissipation: 20W

SC458G B50K 75mm Dual channel linear slide potentiometer pack of 1 pcs

Specification

1. Potentiometer type: slide
2. Maximum resistance: 50KΩ
3. Total length of the pot: 75mm
4. Travel length: 60mm
5. Power rating: 0.5W
6. Element material: carbon
7. Actuator type: Lever
8. Tolerance: 20%

SC458G B50K 75mm Dual channel linear slide potentiometers pack of 10 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 50KΩ
3. Total length of the pot : 75mm
4. Travel length : 60mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

CD4052 4 Channel multiplexer and demultiplexer DIP 16 pin IC pack of 2pcs

Specification

1. Nominal voltage : 5V to 15V
2. Maximum operating voltage : 20V
3. Propagation delay : 400ns at 5V
4. Supports both analog and a digital voltage
5. 4:1 Multiplexer IC
6. 1:4 Demultiplexer IC

SC6080GH B20K 75mm Single channel linear slide potentiometer pack of 1pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 20KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC6080GH B20K 75mm Single channel linear slide potentiometers pack of 10pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 20KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC458G A10K 75mm Dual channel linear slide potentiometers pack of 10 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 60mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC458G A10K 75mm Dual channel linear slide potentiometer pack of 1 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 60mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC458G A10K 75mm Dual channel linear slide potentiometer pack of 5 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 60mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC6021N B10K 75mm Single channel linear slide potentiometer pack of 1 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC6021N B10K 75mm Single channel linear slide potentiometer pack of 5 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC6021N B10K 75mm Single channel linear slide potentiometers pack of 10 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC608N B10K 90mm Single channel linear slide potentiometer pack of 1pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 90mm
4. Travel length : 74mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC608N B10K 90mm Single channel linear slide potentiometer pack of 5pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 90mm
4. Travel length : 74mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC608N B10K 90mm Single channel linear slide potentiometers pack of 10pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 90mm
4. Travel length : 74mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC6021G A50K 75mm Dual channel linear slide potentiometer pack of 1 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 50KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC6021G A50K 75mm Dual channel linear slide potentiometer pack of 5 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 50KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC6021G A50K 75mm Dual channel linear slide potentiometers pack of 10 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 50KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC6080GH A50K 75mm Single channel linear slide potentiometer pack of 1pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 50KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC6080GH A50K 75mm Single channel linear slide potentiometers pack of 10pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 50KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC4580GH A10K 60mm Single channel linear slide potentiometer pack of 1 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 60mm
4. Travel length : 52mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC4580GH A10K 60mm Single channel linear slide potentiometer pack of 5 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 60mm
4. Travel length : 52mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC4580GH A10K 60mm Single channel linear slide potentiometers pack of 10 pcs

Specification

1. Potentiometer type: slide
2. Maximum resistance: 10KΩ
3. The total length of the pot: is 60mm
4. Travel length: 52mm
5. Power rating: 0.25W
6. Element material: carbon
7. Actuator type: Lever
8. Tolerance: 20%

SC6080GH A10K 75mm Single channel linear slide potentiometer pack of 1 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC6080GH A10K 75mm Single channel linear slide potentiometer pack of 5 pcs

Specification

1. Potentiometer type: slide
2. Maximum resistance: 10KΩ
3. Total length of the pot: 75mm
4. Travel length: 67mm
5. Power rating: 0.25W
6. Element material: carbon
7. Actuator type: Lever
8. Tolerance: 20%

SC6080GH A10K 75mm Single channel linear slide potentiometers pack of 10 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC608N A10K 90mm Single channel linear slide potentiometer pack of 1pcs

Specification

1. Potentiometer type: slide
2. Maximum resistance: 10KΩ
3. Total length of the pot: 90mm
4. Travel length: 74mm
5. Power rating: 0.25W
6. Element material: carbon
7. Actuator type: Lever
8. Tolerance: 20%

SC608N A10K 90mm Single channel linear slide potentiometer pack of 5pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 90mm
4. Travel length : 74mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SC608N A10K 90mm Single channel linear slide potentiometer pack of 10pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 90mm
4. Travel length : 74mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

TDA2030 5 TR 5.1-6.1 Home theater 100 watt audio amplifier circuit board

Specifications:-

1. 100% Branded, new and premium quality
2. 5.1 channel – 100 Watt Home theater audio board
3. Pleasant sound and bass boosted
4. Bigger heatsink for longer playback
5. Power up to 3 to 5 amp support

TPA3110 30W Mono (single) channel digital power amplifier module pack of 1pcs

Specification:-

1. Chip name: TPA3110
2. Working Voltage: 8V to 26 V DC
3. Output Power: 30W
4. Applicable Speaker Impedance:  8 Ω is perfect but 4/6 is also good
5. Single-channel digital power amplifier
6. The sound quality is also very good

TPA3118 60W Mono (single) channel digital power amplifier module pack of 1pcs

Specification:-

1. Operating Voltage  :  4.5V to 24V DC
2. Multiple Switching Frequencies
3. Short circuit protection
4. Stereo and Mono Mode
5. Master and Slave Synchronization
6.  Single-Filter Mono Configuration

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier module pack of 1pcs

Specification:-

1. operating range: 12 to 24 volts
2. Output Power: Dual Channel, 30W+30W
3. IC code: TPA3110.
4. Impedance of the output: 4 to 8 ohm ()
5. More than 3A in supply current

PAM8610 10W+10W Two channel audio stereo amplifier module pack of 1pcs

Specification

1. Operating voltage  :  7V to 15V (12V is suitable)
2. Current Rating : 2.5Amp
3. Power rating  :  10W + 10W
4. Working Mode  :  Class - D
5. Chip name  :  PAM8610
6. Mute switch functionality
7. Low noise power amplifier
8. Does not require a heatsink

TPA3110 2x15W Dual channel stereo audio power amplifier module pack of 1pcs

Specification

1. Operating voltage:  8V to 18V
2. Output Power:  15W+15W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Signal to noise ratio  :  100DB
7. Supply current  :  more than 3A

PAM8406 5Wx2 dual channel stereo Mini digital amplifier module with volume control preset pack of 1pcs

Specification

1. Working voltage:  5V
2. Output power:  5W+5W
3. Dual channel stereo
4. High sound quality
5. Excellent noise suppression system
6. Can drive 4 and 8 omega speakers easily
7. Left and Right volume controller

PAM8610 10W+10W Dual channel stereo audio amplifier board module pack of 1pcs

Specification:-

1. Dual channel audio amplifier
2. Working voltage  :  12V
3. Output power  :  10W+10W
4. Chip name  :  PAM8610
5. Efficiency  :  90%
6.  Frequency response  :  20Hz to 50KHz

TPA3116 Dual channel stereo 2 x 50W audio amplifier circuit module pack of 1pcs

Specification:-

1. Dual channel
2. Output power:  50W+50W
3. New filterless design
4. Excellent sound quality
5. Operating voltage:  12V to 24V
6. Current handling capacity:  3A
7. IC name:  TPA3116
8. Can easily drive small speakers

PAM8403 - GF1002 3W+3W Dual channel audio amplifier board with switch potentiometer pack of 1pcs

Specification

1. New and branded quality product
2. Dual channel
3. Power output  :  3W+3W
4. Operating voltage  :  2.5V to 5.5V
5. Recommended voltage  :  5V
6. Excellent sound quality
7. On board switch potentiometer

Dual channel 12V DC bass and treble controller circuit board

Specification:-

1. Input power  :  12V DC
2. Dual channel
3. Produce high and rich sound
4. Passive design
5. Can be connected in front of the amplifier
6. Lightweight and easy to install
7. Proper knowledge is mandatory

3 channel 12-0-12 bass, volume and treble tone equalizer pre-amplifier board

Specification:-

1. 100% Brand new and high-quality product
2. 3-channel potentiometer for easy tuning and adjustment
3. Power supply:  12-0-12
4. High-quality potentiometer contacts well and is stable for audio output
5. Produce high and rich sound quality
6. Excellent working capability

2281 Dual channel LED lever meter driver monolithic DIP 16 pin IC pack of 2pcs

Specification

1. 100% Original and new product
2. Wide operating range:  5V to 14V
3. Power dissipation: 600mW
4. Voltage gain: 13.4 dB
5. Capable of driving red, green, and yellow LEDs
6. High input impedance
7. Applicable to 10-dot mono output