Jumper Wire cable 40 pin Female to Female High Quality 26AWG (21cm)

Specification

1. Jumper Wire
2. Type- Female to Female
3. Pins - Female Both Side
4. Best quality of product
5. Wire length 21cm

Jumper Wire cable 40 pin male to male High Quality 26AWG (21cm)

Specification

1. Jumper Wire
2. Type- male to male
3. Pins - male both Side
4. Best quality of product
5. Wire length 21cm

Jumper Wire cable 40 pin male to Female High Quality 26AWG (21cm)

Specification

1. Jumper Wire
2. Type- male to Female
3. Pins - Female one Side
4. Best quality of product
5. Wire length 21cm

Type 130 Miniature 6V DC Toy Motor Attached Jumper Wire for Arduino

Specification:-

• Voltage: 6 Volts (DC)
• Speed: 16000 RPM
• Reference current: 0.35-0.4A
• Motor size: 15 x 20 mm
• Shaft diameter: 2.0 mm
• Shaft length : 9 mm
• Come with 6 inch (15cm) black and white wire leads for easy connection
• Perfect for robotics projects, solar/battery-powered cars, brush-bots, fans/windmills, and more.

Combo of Multicolor Jumper Wire Cable (Male To Male, Female To Female, Male To Female)-(20pcs Each)

Specification:-

• Jumper cable length : 200 mm
• Flexible wire design
• High-Quality Material
• Male to Male, Female to Female, Male to Female
• Long-lasting performance in various electronic projects.

Combo of Dual Shaft BO Motor | Rubber Wheels | Male to Male Jumper Wire and 4 AA Cell Holder

Specification:-

• Operating Voltage: 3V-12V DC
• Loaded current: 40-80 mA
• Speed: 300 RPM
• Dual-shaft BO Motor
• Type: male to male Jumper Wire
• 100% high-quality branded toy wheels

Package Include: Pack of 4 x BO Motor Dual Shaft and 4 x BO Wheel Smart Car Robot Gear and 10 x Male to Male Jumper Wire and 1 x 4AA Cell Holder

Combo of Breadboard Solderless 400 Tie Points with 60pcs Jumper Wires (20cm) (Male-Female, Female-Female, Male-Male)

Specification:-

• Solderless Breadboard
• Easy Circuit Prototyping
• Durable Construction
• High-quality materials
• Educational Tool
• Color-Coded Wires

SS-200 0.01mm 150M Copper Soldering Jumper Wire for iPhone Chip

Specification:-

• Material: Copper
• Diameter: 0.01mm
• Length:150m
• High resistance
• Insulate, anti-short circuit.
• Brand new and high quality.
• High efficiency and high noise immunity

Combo of 830 Points Solderless Breadboard with 60pcs Jumper Wires (Male-Male | Male-Female | Female-Female)

Specification:-

• Solderless Breadboard
• Easy Circuit Prototyping
• Durable Construction
• High-quality materials
• Educational Tool
• Color-Coded Wires
• Rainbow-colored jumper wires

Combo of SG90 Micro Servo Motor with Multicolor Jumper Wire Cable Set

Specification:-

• Model: SG90
• Rotation: 0°-180°
• Operating voltage:  3V to 7.2V
• Recommended voltage: 5V
• Gear type: Hard plastic
• Jumper cable length: 200 mm
• High-Quality Material
• Male to Male, Female to Female, Male to Female Jumper wire

Package Includes - 1pcs SG90 Servo Motor and Jumper Wire Cable (Male To Male, Female To Female, Male To Female)-(10pcs Each)

Combo of L293D Motor Driver and BO Motor with Rubber Wheels & Jumper wire for DIY Smart Car Kit

Specifications:-

• Motor Type: BO Motor
• Wheel Type: BO Wheel
• Motor Driver: L293D
• L293D 4-Channel DC Motor Driver
• Ideal For: Robotics, DIY Projects
• Ease of Use: Easy to assemble and use

Package Included: 1pcs L293D Motor Driver Shield, 4pcs DC Motors, 4pcs Wheels, Jumper wire (Male To Male, Female To Female, Male To Female)-(20pcs Each)

Combo of Power Supply Module with Jumper Wire and Battery Clip, 830 & 400 tie-Points Breadboard Kit for Arduino

Specification:-

• Wire Type: 20 pin Male to Male Jumper Wire
• Breadboard Power Supply Module
• Module: Compatible with 5V, 3.3V
• 9V battery clip connector
• Clip connector with 3.5mm jack
• 400 & 830-point half-size Solderless breadboard

Package Included:- 1pcs Power Supply Module, 1pcs Battery Clip, 20pcs Jumper Wire (male to male), 830 & 400 tie-Points Breadboard (1pcs each)

Combo of HC-SR04 Ultrasonic Sensor | Mounting Brackets | Jumper Wires Kit (22 item)

Specification:-

• Module: HC-SR04 Ultrasonic Module
• Operating voltage: 5V DC
• Operating current: 15mA
• Measure angle: 15°
• Ranging distance: 2cm - 400cm
• Working frequency: 40Hz
• Trigger input signal: 10uS TTL pulse
• Wire Type: 20-pin Jumper Wire (Male to Male, Male to Female)

Package Included: HC-SR04, Mounting Bracket 1 pcs each

Jumper Wire (male to male, male to female) 10pcs each 

Combo of HC-SR04 Ultrasonic Sensor | Mounting Brackets | Jumper Wires Kit (30 item)

Specification:-

• Module: HC-SR04 Ultrasonic Module
• Operating voltage: 5V DC
• Operating current: 15mA
• Measure angle: 15°
• Ranging distance: 2cm - 400cm
• Working frequency: 40Hz
• Trigger input signal: 10uS TTL pulse
• Wire Type: 20 pin Jumper Wire (Male to Male, Male to Female)

Package Included: HC-SR04, Mounting Bracket 5 pcs each

Jumper Wire (male to male, male to female) 10 pcs each 

Combo of HC-SR04 Ultrasonic Sensor | Mounting Brackets | Jumper Wires Kit (24 item)

Specification:-

• Module: HC-SR04 Ultrasonic Module
• Operating voltage: 5V DC
• Operating current: 15mA
• Measure angle: 15°
• Ranging distance: 2cm - 400cm
• Working frequency: 40Hz
• Trigger input signal: 10uS TTL pulse
• Wire Type: 20 pin Jumper Wire (Male to Male, Male to Female)

Package Included: HC-SR04, Mounting Bracket 2 pcs each

Jumper Wire (male to male, male to female) 10pcs each 

Combo of Multicolor Jumper Wire Cable (Male To Male, Female To Female, Male To Female)-(10pcs Each)

Specification:-

• Jumper cable length: 200 mm
• Flexible wire design
• High-Quality Material
• Male to Male, Female to Female, Male to Female
• Long-lasting performance in various electronic projects.

Combo of Multicolor Jumper Wire Cable (Male To Male, Female To Female, Male To Female)-(40pcs Each)

Specification:-

• Jumper cable length: 200 mm
• Flexible wire design
• High-Quality Material
• Male to Male, Female to Female, Male to Female
• Long-lasting performance in various electronic projects.

Combo of GL-12 830 points Long size Solderless Breadboard with 30pcs Jumper Wires

Specification:-

• Solderless Breadboard
• Easy Circuit Prototyping
• Durable Construction
• High-quality materials
• Educational Tool
• Color-Coded Wires
• Rainbow-colored jumper wires

Combo of Arduino SMD UNO, Breadboard, LED, Resistor, Jumper Wires DIY Electronic Starter Kit

Specification:-

• 5mm LED round shape
• UNO R3 CH340G development board
• 40-pin Jumper Wire
• 9V clip connector with 3.5mm jack
• 1-digit 7-segment LED display 
• 1K Ohm MF Through Hole Resistors Axial Lead
• HC-SR04 Ultrasonic Module
• 180° gear servo motor
• 5V beep buzzer

Kit includes:-

1 x UNO R3 SMD IC Board, 1 x 9V Battery Snapper Connector With DC Jack, 20 x 5mm Red Led, 10 x 1000 OHM (1K OHM) Resistor, 20 x Male To Male Jumper Wires, 20 x Female To Female Jumper Wires, 10 x Male To Female Jumper Wires, 4 x 7 Segment Led Display, 1 x HC-SR04 Ultrasonic Sensor Module, 1 x SG90 Servo Motor, 1 x B10 Buzzer DC 5V 2 Terminals, 1 x 170 Point Mini Solderless Breadboard

Combo of Science Project kit of DC Motor, Breadboard, Jumper wire, Resistor (147 Item)

Specifications:-

• 5mm round shape LED 
• 5v Piezoelectric Buzzer
• 50V Ceramic Capacitor 
• 8050 NPN transistor
• UNO R3 AVR USB Development-board
• GL-12 830 points breadboard 
• 10K Rotary potentiometer 14mm shaft 
• NE555 DIP-8/SOP-8 Timer IC
• Blue Short USB Data Charging Cable
• 7 segment 0.56 inch 1 digit display

Kit includes:- 

1 Pcs EB UNO R3 Board,1 Pcs Rotary Encoder Module, 1 Pcs DC Motor, 1 Pcs L9110 motor driver, 1 Pcs LCD1602, 1 Pcs I2C Interface Module, 1 Pcs Ultrasonic Distance Sensor, 1 Pcs 7-Segment Display, 1 Pcs NE555 Chip, 1 Pcs Passive Buzzer, 1 Pcs Active buzzer,1 Pcs RGB LED, 2 Pcs Photoresistance, 2 Pcs Thermistor, 2 Pcs Tilt Switch, 2 Pcs Switch 4 Pcs Red LED,4 Pcs Green LED, 4 Pcs Yellow LED, 4 Pcs Blue LED, 16 Pcs Resistor(220O), 10 Pcs Resistor(1 kO), 10 Pcs Resistor(10 kO), 10 Pcs Resistor(10 kO), 5 Pcs Capacitor(104), 2 Pcs Capacitor(10uF), 4 Pcs Button(large),8 Pcs Button(small), 1 Pcs Button cap(red), 1 Pcs Button cap(white), 2 Pcs Button cap(blue), 2 Pcs NPN Transistor(8050), 2 Pcs PNP Transistor(8550),2 Pcs Potentiometer(10KO), 1 Pcs 9V Battery Holder, 1 Pcs Breadboard, 1 Pcs USB Cable, 40 Pcs Male to Male Jumper Wires, 20 Pcs Male to Female Jumper Wires, 1 Pcs 4-Pin Wires,1 Pcs 5-Pin Wires,1 Pcs Band Resistor Card.

Combo of Basic Starter Kit with Capacitor, Diode, Resistor, Transistor, Jumper Wire, 830 Breadboard

Specification:-

• 830-Point Breadboard
• 40-pin Jumper Wires
• 5mm round LED 
• Control current flow and protect circuits from reverse voltage
• 4 digit 7 segment LED display 
• 5v Piezoelectric Buzzer Beeper 
• 12 x 12 x 5mm Tactile Push Button
• 9V battery clip connector

Package Included:-  1x pcs 9V 1A Adapter, 1 x pcs 840 Breadboard, 40 x pcs 40-Pin Male to Male Jumper Wires, 40 x pcs 40-Pin Male to Female Jumper wires, 40 x pcs 40Pin Female to Female Jumper wires, 1 x pcs 4-Digit Digital Display, 10 x pcs 104-cremic Capacitor, 1 x pcs Power Supply Module, 1 x pcs Battery Clip, 1 x pcs Active Buzzer, 1 x pcs Passive Buzzer, 1 x pcs 200-ohm variable resistor, 1 x pcs IC4N35, 10 x pcs 0.22 Ceramic Capacitor, 5 x pcs Capacitor, 1 x pcs RGB LED, 2 x pcs Photoresistor, 2 x pcs pin Header (40 pin),2 x pcs Banana Connector, 5 x pcs Diode Rectifier (1N4007), 5 x pcs NPN Transistor(2N2222), 5 x pcs Electrolytic Capacitor(10UF 50V), 5 x pcs, 10 x pcs 22PF Ceramic Capacitor, 10 x pcs 12 x 12 x 5mm Button (small), LEDs-(White, Yellow, Blue, Green, Red) 10 x pcs each, Resistor-(10k, 100k, 220k, 330k, 1K, 22K, 15K,1M)10 pcs each, Electrolytic Capacitor 50V (22uf, 47uf, 3.3uf, 100uf, 2.2uf, 4.7uf, 220uf, 0.47uf, 0.22uf, 33uf, 10uf, 470uf) 12 x1 pcs 

Combo of Solderless Breadboard Multicolor Jumper Wire Kit with Box (140pcs)

Specification:-

• 22 AWG solid wires
• Type- male to male
• Color: red, orange, yellow, green, blue, gray, brown.
• Box size: 165 × 52 × 15mm (approx)        
• Length: 12.5, 10, 7.5, 4.9, 2.5, 2.2, 2, 1.9, 1.7, 1.4, 1, 0.6, 0.5, 0.3cm    

The Basic Starter kit for Arduino for UNO with Breadboard, LED, Resistor, Jumper Wires and Power Supply (201 Item)

Specification:-

• 5mm round shape LED 
• 5mm 4-pin RGB LED
• L293D 6-pin IC
• 5V 1-channel relay module 
• 5mm Mercury switch tilt angle sensor
• 12 x 12 x 7mm tactile push button switch
• 5v Piezoelectric Buzzer Beeper Alarm
• 10K potentiometer D shaft handle 3 pin
• DC 3.3V-5v Joystick Sensor Module
• UNO R3 USB Development board
• 830 point Solderless breadboard
• MB-102 3.3V/5V Power Supply Module
• HC-SR04 Ultrasonic Module
• Type 130 Miniature 6V DC Toy Motor 
• 26AWG Jumper Wire cable

Package Included: - LED (Red, Blue, Yellow, Green,  White) 5 x Pcs each,1 x Pcs RGB LED, 2 x Pcs Photoresistor (GL12528 ), 1 x Pcs NTC 10K thermistor, 2 x Pcs Diode Rectifier (1N4007), 2 x Pcs 220uf 10V Aluminum Electrolyte, 1 x Pcs Tilt Switch, 5 x Pcs push button switch, 1 x Pcs IC L293D, 1 x Pcs 5V Buzzer, 1 x Pcs 12V Buzzer, 1 x Pcs Potentiometer (10K), 1 x Pcs Joystick Module, 1 x Pcs 5V Relay, 1 x Pcs R3 Controller Board, 1 x Pcs 830 Point Breadboard, 1 x Pcs Power Supply Module, 1 x Pcs Ultrasonic Sensor, 1 x Pcs 3V DC Motor, 40 x Pcs Jumper Wire (male to male), 1 x Pcs USB Cable, 10 x Pcs Female-to-male jumper Wire, Resistor (10K, 100K, 220K, 330K, 1K, 22K, 15K, 27K, 4.7K, 1M) 10 x pcs each.

Combo of BO Motor, Yellow Wheel with UNO Board & Jumper Wire (40 Item)

Specification:-

• UNO R3 development board
• 11 mm Male Berg Strip1 x 40 Pin header 
• HC-SR04 Ultrasonic Sensor
• Male to male Jumper Wire cable
• L293D 4-Channel DC Motor Driver
• IR Proximity Sensor 
• 60mm x 25mm Hard plastic wheel

Package Included:- 1 pcs UNO Board, 1 pcs SG90 Servo Motor, 1 pcs 9V Toy Battery, 1 pcs 9V battery clip connector with 3.5mm pin jack, 1 pcs 40 pin Header, 2 pcs KCD1-B101 6A 250V AC Red Rocker switch, 1 pcs HC-SR04 Ultrasonic Sensor Mounting Bracket, 4 pcs BO motor, 20 pcs Jumper wire, 1 pcs L293D 4-Channel DC Motor Driver, 1 pcs Ultrasonic Module HC-SR04, 1 pcs IR Proximity Sensor, 1 pcs USB Cable, 4 pcs 60mm x 25mm Hard plastic Yellow Wheel

Combo of Jumper wire with UNO Board & Ultrasonic Sensor (123 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 

Package Included:- 40 pcs Male to Male Jumper wire, 40 pcs Female to Female Jumper wire, 40 pcs Male to Female Jumper Wire, 1 pcs Ultrasonic Sensor, 1 pcs USB Cable, 1 Pcs UNO Board

Combo of Jumper wire with L293D Motor Drive & UNO Board (123 Item)

Specification:-

• Driver module : L298N
• Driver chip : Double H bridge
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 

Package Included:- 40 pcs Male to Male Jumper wire, 40 pcs Female to Female Jumper wire, 40 pcs Male to Female Jumper Wire, 1 pcs L298N Motor Driver, 1 pcs USB Cable, 1 Pcs UNO Board

Combo of | MB102 Module | Battery Clip | Alligator Clip | Capacitor | LED | Jumper Wire (77 pcs)

Specification:-

• 3.3V/5V Breadboard Power Supply Module
• 40mm crocodile alligator clip
• Battery clip connector with 3.5mm pin jack
• 26AWG Jumper Wire cable
• 5mm LED (Green, Blue, Red, Yellow, White)

Package Included:- 3pcs power supply module, 3pcs 9V battery clip, 4pcs  Alligator clip, Jumper wire (Female to Female, Male to Female, Male to Male) 10 pcs each, LED (Green, Blue, Red, Yellow, white) 5 pcs each, Capacitor 50V (22uf, 47uf, 33uf, 100uf, 22uf, 4.7uf, 220uf, 10uf, 1uf, 3.3uf, 10uf, 470uf) 12 x pcs 

Combo of Jumper wire with SG90 small Motor & Ultrasonic Module (122 Item)

Specification:-

• Ultrasonic Module HC-SR04 
• Operating voltage: 5V DC
• Operating current: 15 mA
• SG90 Hard plastic gear servo motor
• 40 Pin Female to Female Jumper Wire
• 40 Pin Male to Male Jumper Wire
• 40 Pin Male to Female Jumper Wire

Package Included:- 1 x SR04 Ultrasonic sensor , 1 x SG90 Servo Motor, 40 x Female to Female Jumper Wire, 40 x Male to Male Jumper Wire, 40 x Male to Female Jumper Wire

Combo of Power Supply Module | Jumper Wires | 9V Battery Clip | Alligator Clip (28 pcs)

Specification:-

• MB-102 3.3V/5V Power Supply Module
• Input Voltage: 6.5–12V (DC) or USB Power
• 40mm crocodile alligator clip 
• 26AWG Jumper Wire cable
• 9V battery clip connector with 3.5mm pin jack
• 830 Points Half Size Solderless Breadboard
• 400 points Half-size Solderless breadboard

Package Included:- 1 x 830 Points Breadboard, 1 x 400 point breadboard , 1 x 9V battery clip connector, 1 x MB-102 Power Supply Module, 4 x Crocodile alligator clip, 20 x Male to Male Jumper Wire

Combo of Jumper Wire with UNO Board & Battery Clip Connector (43 Item)

Specification:-

• Model name: UNO R3
• UNO R3 CH340G development board 
• Blue Short USB Data Charging Cable
• 9V battery clip connector with 3.5mm pin jack
• 26AWG 40-pin Jumper Wire cable

Package Included:- 1 x 40 Pcs Male to Female Jumper wire, 1 x UNO Board, 1 x 9V Battery Connector, 1 x USB Cable

Combo of Nano R3 CH340 Development Board with Jumper Wire & Ultrasonic Module HC-SR04 (123 Item)

Specification:-

• Model name : NANO R3
• Recommended operating voltage range : 5V to 12V
• Digital input/output pins : 14 (of which 6 provide PWM output)
• Clock frequency : 16MHz
• Operating voltage: 5V DC
• Measure angle: 15°
• Operating current: 15mA
• Working voltage : 5V(DC)

DIY Water Pump Combo Kit Jumper Wires | 5V Relay & 1m PVC Tubing (62 Items)

Specification:-

• Jumper Wires
• 5V 1-Channel Relay
• DC Mini Water Pump
• 1-meter Flexible PVC Tubing
• Relay Module Functionality
• Compact Water Pump
• Flexible PVC Tubing

Component List: 1 Pcs 5V Relay Module, 1 Pcs DC Mini water pump with 1M Tubing Pipe, 20 pcs male-to-male jumper wire, 20 pcs male-to-female jumper wire, 20 pcs female-to-female jumper wire

DIY Combo Kit ESP8266MOD with Breadboard | Jumper Wires | BMP180 Sensor | OLED Display | USB Cable (85 Items)

Specification:-

• Tie points: 400
• ESP8266MOD NodeMCU Development Board
• BMP180 Atmospheric pressure sensor module
• 0.9-inch OLED Screen Display Module
• Male-to-Male 40-Pin Jumper wire
• Male-to-Female 40-Pin Jumper wire

Component List: 1 Pcs B-Type USB Cable, 1 Pcs ESP8266MOD Development Board, 1 Pcs BMP180 - Digital barometer, 1 Pcs OLED Screen Display Module 4-pin, 1 Pcs 400 points Half-size solderless breadboard, 40 Pcs Male-to-Female Jumper wire, 40 Pcs Male to Male Jumper wire

DIY Combo Kit with Jumper Wires, Development Board & 12V 5A Adapter (123 Items)

Specification:-

• Input Voltage: AC 100-240V
• Output Voltage: DC 12V, 5A
• Connector Size: 5.5mm x 2.5mm Male Plug
• High-quality PVC-coated flexible wires
• Microcontroller: ATmega328P
• Clock Speed: 16 MHz
• USB to Serial: CH340G

Package Included:- 1 Pcs USB Cable,1 Pcs R3 CH340 Development Board,1 Pcs 12V 5A Power supply Adapter,40 Pcs Male to Male Jumper Wire,40 Pcs Male to Female Jumper wire,40 Female to Female Jumper wire

Combo of Electronics DIY Kit | Breadboard | Jumper Wires | DHT11 Sensor | LCD Display & R3 Board (125 Items)

Specification:-

• DHT11 5V Sensor Module
• 16 x 2 LCD Green & Yellow display
• LCD Size : 16 x 2 (16 character x 2 rows)
• 400 point Breadboard 
• Breadboard Dimensions : 82mm x 55mm 
• R3 CH340G 5V development board 
• Model name : UNO R3 

Combo of LM393 LDR Sensor Module with 5V 1 Channel Relay & Jumper Wire (12 Item)

Specification:-

• Operating voltage : 3.3V-5V
• Power indicator : Red
• Digital switch output indicator : Green
• Number of channels: 1
• Quiescent current: 2mA
• Trigger current: 20mA
• Relay maximum current:  10A

Package Included:-  1 Pcs 5V Relay Module, 1 Pcs LDR Sensor Modulem, 10 Pcs Female to Female Jumper wire

Combo of Electronics DIY Kit | 5V Relay | Mini Water Pump | Proximity Sensor | Jumper Wires (48 Items)

Specification:-

• Power Source: DC
• Material: Polyvinyl Chloride
• Power current:  1.9A
• Working voltage:  6V to 12V
• Digital output : logic one (+3.5V DC) logic zero (0V DC)
• Distance measuring range : 2cm to 30cm
• Effective distance range : 2cm to 80 cm
• Number of channels: 1
•  Supply voltage: 3.75V to 6V
• Current when the relay is active: 70m

Package Included:-  2 Pcs 9V Battery, 2 Pcs Battery Clip Connector, 1 Pcs 5V Relay Module, 40 Pcs Female to Female Jumper Wire, 1 Pcs DC Mini Motor Pump with 1M Tubing, 1 Proxmity Sensor

Combo of Rain Detect Sensor for School Project with Jumper Wire|Water Pump & 5V Relay Module (43 Item)

Specification:-

• Working voltage: 6V to 12V
• Power current: 1.9A
• Max. flow : 50 liter/hour
• Distribution bit to adjust sensitivity
• 5V Relay Module – Enables seamless control of electrical devices based on sensor input.

Package Included:- 1 pcs 5V Relay Module, 1 pcs water pump, 1 pcs Rain detect Sensor, 40 pcs Female to Female Jumpere wire

Combo of Jumper Wire & UNO Board with Ultrasonic Sensor Module (64 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 
• G90 Micro digital servo motor 

Package Included: 20 pcs Male to Male Jumper wire | 20 pcs Female to Female Jumper wire | 20 pcs Male to Female Jumper wire | 1 pcs Ultrasonic Sensor | 1 pcs USB Cable | 1 pcs SG90 Servo Motor | 1 pcs UNO R3 AVR USB Development board

Combo of DIY Starter Kit with UNO Board | Resistor & Jumper wire (113 Item)

Specification:-

• Resistor type: carbon film resistor
•  HC-SR04 Ultrasonic Sensor
• 400 points Half size Solderless breadboard 
• 10mm Yellow Dip Led round shape
• 9V battery clip connector
• UNO R3 CH340G development board
• Soil Hygrometer Humidity Detection Moisture Sensor 

Package Included: 1 pcs UNO Board | 1 pcs Breadboard | 1 pcs Ultrasonic Sensor | 1 pcs water sensor | 1 pcs USB Cable | 5 pcs Yellow LED | 5 pcs Red LED | 5 pcs Green LED | 1 pcs 9V battery connector | 2 pcs 1 Digit 7 segment Display | 1 pcs 5V Buzzer | 1 pcs Soil Hygrometer Humidity Sensor | 40 pcs Male to Female Jumper wire | 6 pcs push button switch with Cap (12x12x7mm) | 1 pcs IR Proximity Sensor | 10 pcs Resistor (1K) | 10 pcs Resistor (10K) 10 pcs Resistor | (22K) 10 pcs Resistor | (100K) 1 pcs LDR sensor module (LM393)

150B High quality Stainless steel wire cutter and stripper multipurpose tool with rubber insulated handles

Specification:-

1. High-quality wire cutter and stripper
2. The total length of the tool : 5 inches (130mm)
3. Rubber insulated handles for enhancing comfort and grip
4. High carbon stainless steel body
5. Corrosion resistance properties
6. Cuts wire of different sizes and shapes
7. Spring-loaded for better and easy cutting

315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module

Application of transmitter:

1. Wireless calling system,
2. Burglar alarm,
3. Wireless data transmission,
4. Automated data acquisition system

Application of receiver:

1. Wireless remote control switch,
2. Remote control socket,
3. Data transmission,
4. Remote control toys,
5. Anti-theft alarm host

HC-05 Wireless Bluetooth Transceiver RF Main Module Serial For Arduino

Specifications:-

1. Bluetooth Version: 2.0+EDR (Enhanced Data Rate).
2. Operating Voltage: 3.6V - 6V.
3. Communication Range: Up to 10 meters.
4. Supports various communication modes for flexibility in project integration.

70mm x 70mm 6V 100mAh Square shape polycrystalline mini epoxy solar panels with wires attach pack of 50pcs

Specification:-

1. High-quality product
2. 100% user satisfaction
3. High quality polycrystalline solar panel with wire attached
4. Output voltage : 6V
5. Current range : 100mAh
6. Durable construction
7. Resistance to moisture and environmental pollutants

Light dependent resistors sensor 12 mm (LDR) GL12528 pack of 2pcs

Specification:-

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  250V
5. Max. power  :  200W
6. Package includes : 5 pieces

NRF24L01 antenna V5.0 + PA + LNA SMA wireless Module 8 Pin 1100 meters

Specifications:-

1. Input supply voltage: 3V
2. Working current: 15mA
3. Maximum output power: +20 dBm
4. Power down mode current: 4.2 μA
5. Operating range: 1Km

8 inch (200mm) High carbon stainless steel single cut flat file

Specification

1. The total length of the file : 8 inches (200mm)
2. High carbon stainless steel body
3. Single cut pattern
4. Offers clean and professional results with light pressure
5. Very sharp teeth for excellent performance
6. Corrosion resistance properties for durability and longevity

2 pin SM JST wire connector 2.5mm pitch male and female pair 2517 pack of 2 pair (6 inches)

Specification:-

1. SM series JST connector
2. Number of pins: 2
3. Current rating: 3A
4. Voltage rating: 250V
5. Temperature range : -25°C to +85°C
6. High contact pressure
7. Highly reliable housing construction
8. Secure arm lock mechanism
9. Package includes: 2 pairs ( 2 pieces of male + 2 pieces of female)
10. Wire length: 12 inches

Rainbow Color Flat Cable 10 way (2mtr)

Applications:

1. Data transmission and communications.
2. Computer cable applications.
3. Internal wiring.
4. Robotics.
5. DIY projects.
6. Test and measure equipment.
7. Automated termination equipment.
8. Pick and place equipment as well.

Wireless HI-FI boombox circuit modules with in-built bluetooth and 5 watt amplifier for direct speaker pack of 50pcs

Specification

1. Working voltage:  5V
2. Output current:  5 Watt
3. Support  :  mp3/bluetooth/USB/aux/FM
4. Excellent sound quality
5. Convenient
6. Cheap and easy to install

Wireless HI-FI boombox circuit modules with in-built bluetooth and 5 watt amplifier for direct speaker pack of 10pcs

Specification

1. Working voltage:  5V
2. Output current:  5 Watt
3. Support  :  mp3/bluetooth/USB/aux/FM
4. Excellent sound quality
5. Convenient
6. Cheap and easy to install

Wireless HI-FI Bluetooth MP3 USB FM player module with remote and stereo 5W+5W output for speakers pack of 10pcs

Specification:-

1. Working voltage  :  5V
2. Support  :  mp3/bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Can connect speakers directly
5. Cheap and easy to install
6. Remote for easy handling

Micro USB Female jack wire data charge cable connector white pack of 5pcs

Specifications

1. Type : Female
2. Current rating : 1A
3. Voltage Rating : 5V to 30V (max)
4. Contact resistance : 30mΩ @ 100mA
5. Contact material : Copper
6. Prevents data fluctuation

80mm x 40mm 6V 60mAh Rectangle shape polycrystalline mini epoxy solar panels with wires attach pack of 50pcs

Specification:-

1. High-quality product
2. 100% user satisfaction
3. High quality polycrystalline solar panel with wire attach
4. Output voltage : 6V
5. Current range : 60mAh
6. Durable construction
7. Resistance to moisture and environmental pollutants

KCX BT002 bluetooth 4.2 Wireless stereo audio receiver circuit modules pack of 50pcs

Specification

1. Working voltage:  Dc 3.3V to 5.0 V
2. Provide good sound quality
3. Easy to set up with other amplifiers
4. Very low power consumption
5. Very small size

Wireless HI-FI Bluetooth MP3 USB FM player module with remote and stereo 5W+5W output for speakers pack of 50pcs

Specification

1. Working voltage:  5V
2. Support:  mp3/Bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Can connect speakers directly
5. Cheap and easy to install
6. Remote for easy handling

Combo of 5 type wires 10 meter each (Red, Black, Yellow, Blue, Green)

Specification:-

1. Perfect rubber insulation
2. Longer service life
3. 95% Copper alloy tin coated
4. 10 meter of wire of every color
5. Different color for easy installation
6. High quality for excellent performance
7. Ultra flexible for better connectivity

DIY Combo Kit | 6V 60mAh Mini Solar Panel with Dual Red 5mm LEDs | SPST Rocker Switch & Wire

Specification:

1. Solar panel   
   1. High-quality product
   2. Size: 80mm x 40mm
   3. 100% user satisfaction
   4. High quality polycrystalline solar panel
   5. Output voltage : 6V
   6. Current range : 60mAh
2. LED
   1. 5mm Round Standard LED
   2. Emitting color      : Bright RED
3. Rocker switch
   1. Type  :  single pole, single throw
   2. Max. current withstand  :  250V
   3. Max. power rating  :  6A
4. Wire
   1. High quality wire
   2. Easy to use

KCX BT002 bluetooth 4.2 Wireless stereo audio receiver circuit modules pack of 10pcs

Specification

1. Working voltage:  Dc 3.3V to 5.0 V
2. Provide good sound quality
3. Easy to set up with other amplifiers
4. Very low power consumption
5. Very small size and lightweight

80mm x 40mm 6V 60mAh Rectangle shape polycrystalline mini epoxy solar panels with wire attach pack of 1pcs

Specification:-

1. High-quality product
2. 100% user satisfaction
3. High quality polycrystalline solar panel with wire attach
4. Output voltage : 6V
5. Current range : 60mAh
6. Durable construction
7. Resistance to moisture and environmental pollutants

70mm x 70mm 6V 100mAh Square shape polycrystalline mini epoxy solar panels with wires attach pack of 10pcs

Specification:-

1. High-quality product
2. 100% user satisfaction
3. High quality polycrystalline solar panel with wire attached
4. Output voltage : 6V
5. Current range : 100mAh
6. Durable construction
7. Resistance to moisture and environmental pollutants

14-in-1 DIY Electronics Combo Kit | PCB Board | Male/Female Berg Strip | Wire Connector

Specification:

• General Purpose PCB board directly from the Manufacturer (15*10)
• Material: FR2 PREMIUM QUALITY Copper Clad Phenolic.
• Holes provided: Yes
• PCB Type: General Purpose Copper-Clad
• PCB Size: Standard small prototyping size
• Pitch: 2.54mm standard spacing
• 4 Pieces of wire connector

Quantity:

2 × General Purpose PCB
4 × Male Berg Strip
4 × Female Berg Strip
4 × Wire Connectors

110mm x 40mm 6V 70mAh rectangle shape polycrystalline mini epoxy solar panels with wires attach pack of 50pcs

Specification:

• High-quality product
• 100% user satisfaction
• High quality polycrystalline solar panel with wire attach
• Output voltage : 6V
• Current range : 70mAh
• Durable construction
• Resistance to moisture and environmental pollutants

80mm x 40mm 6V 60mAh Rectangle shape polycrystalline mini epoxy solar panels with wires attach pack of 10pcs

Specification:-

1. High-quality product
2. 100% user satisfaction
3. High quality polycrystalline solar panel with wire attach
4. Output voltage : 6V
5. Current range : 60mAh
6. Durable construction
7. Resistance to moisture and environmental pollutants

18650 3.7V 2 battery holder hard plastic case with wire pack of 100 (3.7V x 2 battery = 7.4Volt)

Specifications:-

1. 100% Branded
2. Holds two 3.7V cells
3. Type : 18650 battery holder
4. Output current : 7.4V
5. High quality plastic material
6. Convenient to use

18650 3.7V 2 battery holder hard plastic case with wire pack of 10 (3.7V x 2 battery = 7.4Volt)

Specifications:-

1. 100% Branded
2. Holds two 3.7V cells
3. Type: 18650 battery holder
4. Output current: 7.4V
5. High-quality plastic material
6. Convenient to use

70mm x 70mm 6V 100mAh Square shape polycrystalline mini epoxy solar panels with wire attach pack of 1pcs

Specification:-

1. High-quality product
2. 100% user satisfaction
3. High quality polycrystalline solar panel with wire attached
4. Output voltage : 6V
5. Current range : 100mAh
6. Durable construction
7. Resistance to moisture and environmental pollutants

Combo of 50m Red & 50m Black Electric Wire Roll for DIY Science Projects

Specification:-

• Product Type: Multi-purpose Electric Wire Combo
• Wire Gauge: Approx. 26 AWG to 28 AWG
• Voltage Rating: Up to 250V
• Red Wire: 50 meters
• Black Wire: 50 meters
• Total Length: 100 meters
• Colour: Red and black

110mm x 40mm 6V 70mAh rectangle shape polycrystalline mini epoxy solar panels with wire attach pack of 1pcs

Specification:-

1. High-quality product
2. 100% user satisfaction
3. High quality polycrystalline solar panel with wire attach
4. Output voltage : 6V
5. Current range : 70mAh
6. Durable construction
7. Resistance to moisture and environmental pollutants

110mm x 40mm 6V 70mAh rectangle shape polycrystalline mini epoxy solar panels with wires attach pack of 10pcs

Specification:-

1. High-quality product
2. 100% user satisfaction
3. High quality polycrystalline solar panel with wire attach
4. Output voltage : 6V
5. Current range : 70mAh
6. Durable construction
7. Resistance to moisture and environmental pollutants

9mm White color polyolefin heat shrink tubes box of 100 meter

Specifications:-

1. Color of the tube : White
2. Diameter of the tube : 9mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

9mm Yellow color polyolefin heat shrink tube pack of 5 meter

Specifications:-

1. Color of the tube : Yellow
2. Diameter of the tube : 9mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

9mm Yellow color polyolefin heat shrink tubes box of 100 meter

Specifications:-

1. Color of the tube : Yellow
2. Diameter of the tube : 9mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

10mm Transparent polyolefin heat shrink tube pack of 5 meter

Specifications

1. Color of the tube: Transparent
2. Diameter of the tube: 10mm
3. Operating temperature: 50°C to 125°C
4. Shrinking temperature: 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio: 2:1
7. Voltage rating: 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

10mm Red color polyolefin heat shrink tube's pack of 50 meter

Specifications

1. Color of the tube: Red
2. Diameter of the tube: 10mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

10mm Blue color polyolefin heat shrink tube pack of 5 meter

Specifications

1. Color of the tube : Blue
2. Diameter of the tube : 10mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

10mm Blue color polyolefin heat shrink tube's pack of 50 meter

Specifications

1. Color of the tube: Blue
2. Diameter of the tube: 10mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

9mm Blue color polyolefin heat shrink tube's pack of 50 meter

Specifications

1. Color of the tube: Blue
2. Diameter of the tube: 9mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

9mm Blue color polyolefin heat shrink tubes box of 100 meter

Specifications

1. Color of the tube: Blue
2. Diameter of the tube: 9mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

9mm Red color polyolefin heat shrink tube's pack of 50 meter

Specifications

1. Color of the tube : Red
2. Diameter of the tube : 9mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

9mm Red color polyolefin heat shrink tubes box of 100 meter

Specifications

1. Color of the tube: Red
2. Diameter of the tube: 9mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

9mm Green color polyolefin heat shrink tube pack of 5 meter

Specifications

1. Color of the tube : Green
2. Diameter of the tube : 9mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

9mm Green color polyolefin heat shrink tubes box of 100 meter

Specifications

1. Color of the tube: Green
2. Diameter of the tube: 9mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.

10mm Green color polyolefin heat shrink tube pack of 5 meter

Specifications

1. Color of the tube: Green
2. Diameter of the tube: 10mm
3. Operating temperature : 50°C to 125°C
4. Shrinking temperature : 90°C
5. Tensile strength : ≥10.4MPa
6. Shrink ratio : 2:1
7. Voltage rating : 600V
8. Very easy to install
9. High flexibility
10. Do not react with chemicals.