KA2281 5-Dot Dual Led Level Meter Driver 16 DIP IC Pack of 2

Specification:-

• Supply Voltage : 16V
• D Terminal Output Current: 30mA
• Power Dissipation: 600mW
• Operating Temperature: -20°C + 70°C
• Storage Temperature: -40°C + 125°C

KA2281 5-Dot Dual Led Level Meter Driver 16 DIP IC Pack of 10

Specification:-

• Supply Voltage: 16V
• D Terminal Output Current: 30mA
• Power Dissipation: 600mW
• Operating Temperature: -20°C + 70°C
• Storage Temperature: -40°C + 125°C

KA2281 5-Dot Dual Led Level Meter Driver 16 DIP IC Pack of 50

Specification:-

• Supply Voltage: 16V
• D Terminal Output Current: 30mA
• Power Dissipation: 600mW
• Operating Temperature: -20°C + 70°C
• Storage Temperature: -40°C + 125°C

B1403 5 dot red green LED lever meter driver SIP 9 pin IC pack of 2pcs

Specification

1.  Capable of generating a bar-display
2. Operates from either AC or DC input voltage
3. Type : SIP LED driver
4. Supply voltage : 6V to 16V
5. Power dissipation  : 1100mW
6. Low noise

2281 Dual channel LED lever meter driver monolithic DIP 16 pin IC pack of 2pcs

Specification

1. 100% Original and new product
2. Wide operating range:  5V to 14V
3. Power dissipation: 600mW
4. Voltage gain: 13.4 dB
5. Capable of driving red, green, and yellow LEDs
6. High input impedance
7. Applicable to 10-dot mono output

2281 Dual channel LED lever meter driver monolithic DIP 16 pins IC pack of 10pcs

Specification

1. 100% Original and new product
2. Wide operating range:  5V to 14V
3. Power dissipation : 600mW
4. Voltage gain : 13.4 dB
5. Capable of driving red, green, and yellow LED's
6. High input impedance
7. Applicable to 10 dot mono output

2281 Dual channel LED lever meter driver monolithic DIP 16 pins IC pack of 50pcs

Specification

1. 100% Original and new product
2. Wide operating range  :  5V to 14V
3. Power dissipation : 600mW
4. Voltage gain : 13.4 dB
5. Capable of driving red, green, and yellow LED's
6. High input impedance
7. Applicable to 10 dot mono output

B1403 5 dot red green LED lever meter driver SIP 9 pins IC pack of 10pcs

Specification

1.  Capable of generating a bar-display
2. Operates from either AC or DC input voltage
3. Type : SIP LED driver
4. Supply voltage : 6V to 16V
5. Power dissipation  : 1100mW
6. Low noise

B1403 5 dot red green LED lever meter driver SIP 9 pins IC pack of 50pcs

Specification

1.  Capable of generating a bar-display
2. Operates from either AC or DC input voltage
3. Type : SIP LED driver
4. Supply voltage : 6V to 16V
5. Power dissipation  : 1100mW
6. Low noise

LM3914 Logarithmic LED dot or bar display driver 18 pins IC pack of 50pcs

Specification

1. Analog controlled LED Driver IC
2. Number of controllable LEDs : 10
3. Operating voltage :  3V to 18V
4. Input analog voltage range : 1.2V to 12V
5. LED sink current :  2mA to 30mA (programmable)
6. Both Dot and Bar display mode available

L293D Quadruple half-H driver or motor driver 16 pin IC pack of 2pcs

Specification

1. Quadruple high current half-H driver IC
2. Or motor driver IC
3. Supply voltage : 5V to 7V
4. Output voltage : 5V to 36V
5. Max. current : 600mA
6. Number of pin : 16
7. Peak output current : 1.2A

LM3915 Logarithmic LED dot or bar display driver 18 pins IC pack of 10pcs

Specification

1. Analog controlled LED driver IC with logarithmic output
2. Operating Voltage :  3V to 25V
3. Reference Voltage :  1.2V to 12V
4. Power dissipation : 1365 mW
5. Number of pin : 18
6. Number of controllable LED's : 10
7. Drives LEDs, LCDs, or Vacuum Fluorescents

LM3915 Logarithmic LED dot or bar display driver 18 pin IC pack of 2pcs

Specification

1. Analog controlled LED driver IC with logarithmic output
2. Operating Voltage :  3V to 25V
3. Reference Voltage :  1.2V to 12V
4. Power dissipation : 1365 mW
5. Number of pin : 18
6. Number of controllable LED's : 10
7. Drives LEDs, LCDs, or Vacuum Fluorescents

LM3914 Logarithmic LED dot or bar display driver 18 pin IC pack of 2pcs

Specification

1. Analog controlled LED Driver IC
2. Number of controllable LEDs : 10
3. Operating voltage :  3V to 18V
4. Input analog voltage range : 1.2V to 12V
5. LED sink current :  2mA to 30mA (programmable)
6. Both Dot and Bar display mode available

LM3915 Logarithmic LED dot or bar display driver 18 pins IC pack of 50pcs

Specification

1. Analog controlled LED driver IC with logarithmic output
2. Operating Voltage :  3V to 25V
3. Reference Voltage :  1.2V to 12V
4. Power dissipation : 1365 mW
5. Number of pin : 18
6. Number of controllable LED's : 10
7. Drives LEDs, LCDs, or Vacuum Fluorescents

AN6884 Logarithmic 5 dot LED driver SIP 9 pins IC pack of 50pcs

Specification

1. 5 dot LED bar logarithmic IC
2. Operating voltage range :  5V to 16 V
3. Circuit voltage : 6V
4. Supply current  : 12A
5. Power dissipation :  1100mW
6. Constant current output :  15 mA
7. Inbuilt high gain amplifier: 26 dB
8. Number of pin : 9
9. Low noise immunity

AN6884 Logarithmic 5 dot LED driver SIP 9 pin IC pack of 2pcs

Specification

1. 5 dot LED bar logarithmic IC
2. Operating voltage range:  5V to 16 V
3. Circuit voltage: 6V
4. Supply current: 12A
5. Power dissipation:  1100mW
6. Constant current output:  15 mA
7. Inbuilt high gain amplifier: 26 dB
8. Number of pins: 9
9. Low noise immunity

LM3914 Logarithmic LED dot or bar display driver 18 pins IC pack of 10pcs

Specification

1. Analog-controlled LED Driver IC
2. Number of controllable LEDs: 10
3. Operating voltage:  3V to 18V
4. Input analog voltage range: 1.2V to 12V
5. LED sink current :  2mA to 30mA (programmable)
6. Both Dot and Bar display modes are available

AN6884 Logarithmic 5 dot LED driver SIP 9 pins IC pack of 10pcs

Specification

1. 5-dot LED bar logarithmic IC
2. Operating voltage range:  5V to 16 V
3. Circuit voltage: 6V
4. Supply current: 12A
5. Power dissipation:  1100mW
6. Constant current output:  15 mA
7. Inbuilt high gain amplifier: 26 dB
8. Number of pins: 9
9. Low noise immunity

L293D Quadruple half-H driver or motor driver 16 pins IC pack of 10pcs

Specification

1. Quadruple high current half-H driver IC
2. Or motor driver IC
3. Supply voltage : 5V to 7V
4. Output voltage : 5V to 36V
5. Max. current : 600mA
6. Number of pin : 16
7. Peak output current : 1.2A

L293D Quadruple half-H driver or motor driver 16 pins IC pack of 50pcs

Specification

1. Quadruple high current half-H driver IC
2. Or motor driver IC
3. Supply voltage : 5V to 7V
4. Output voltage : 5V to 36V
5. Max. current : 600mA
6. Number of pin : 16
7. Peak output current : 1.2A

MOC3021 Opto-isolator TRIAC driver DIP 6 pin IC pack of 2pcs

Specification

1. Forward current: 60mA
2. Power dissipation: 100mW
3. Off-state output terminal voltage : 400V
4. Peak repetitive surge current : 1A
5. Reverse voltage : 3V
6. Excellent IFT stability
7. High isolation voltage

TM1628 Digital LED display driver 28 pin IC pack of 2pcs

Specification:-

1. Advance technology
2. Supply voltage : 5V to 7V
3. Logic input voltage : -0.5 to VD D + 0.5
4. Logic supply voltage : 4.5V to 5.5V
5. Low power consumption
6. Multi-display modes
7. Key scanning (8 x 2 matrix)

TM1628 Digital LED display driver 28 pins IC pack of 10pcs

Specification

1. Advance technology
2. Supply voltage : 5V to 7V
3. Logic input voltage : -0.5 to VD D + 0.5
4. Logic supply voltage : 4.5V to 5.5V
5. Low power consumption
6. Multi-display modes
7. Key scanning (8 x 2 matrix)

TM1628 Digital LED display driver 28 pins IC pack of 50pcs

Specification

1. Advance technology
2. Supply voltage: 5V to 7V
3. Logic input voltage: -0.5 to VD D + 0.5
4. Logic supply voltage: 4.5V to 5.5V
5. Low power consumption
6. Multi-display modes
7. Key scanning (8 x 2 matrix)

UTC2030A 18 Watt HI - FI Amplifier and 35 watt driver 5 pin linear IC pack of 2pcs

Specification

1. Audio power amplifier
2. Power supply range:  6V to 36V
3. Output power : 18 Watts
4. Number of pins : 5
5. Maximum current flow : 900mA
6. Thermal & short circuit protection

UTC2030A 18 Watt HI - FI Amplifier and 35 watt driver 5 pins linear IC pack of 10pcs

Specification

1. Audio power amplifier
2. Power supply range :  6V to 36V
3. Output power : 18 Watts
4. Number of pins : 5
5. Maximum current flow : 900mA
6. Thermal & short circuit protection

UTC2030A 18 Watt HI - FI Amplifier and 35 watt driver 5 pins linear IC pack of 50pcs

Specification

1. Audio power amplifier
2. Power supply range:  6V to 36V
3. Output power: 18 Watts
4. Number of pins: 5
5. Maximum current flow: 900mA
6. Thermal & short circuit protection

HIP4082 80V 1.25A peak current H-bridge FET driver 16 pin IC pack of 2pcs

Specification

1. Supply voltage: 8.5V to 16V
2. Phase slew rate: 20V/ns
3. Operating current: 4A
4. Independently drives 4 N-Channel FET in half-bridge
5. Drives 1000pF load in free air at 50°C

HIP4082 80V 1.25A peak current H-bridge FET driver 16 pins IC pack of 10pcs

Specification

1. Supply voltage : 8.5V to 16V
2. Phase slew rate : 20V/ns
3. Operating current : 4A
4. Independently drives 4 N-Channel FET in half-bridge
5. Drives 1000pF load in free air at 50°C

HIP4082 80V 1.25A peak current H-bridge FET driver 16 pins IC pack of 50pcs

Specification

1. Supply voltage: 8.5V to 16V
2. Phase slew rate: 20V/ns
3. Operating current : 4A
4. Independently drives 4 N-Channel FET in half-bridge
5. Drives 1000pF load in free air at 50°C

MOC3021 Opto-isolator TRIAC driver DIP 6 pins IC pack of 10pcs

Specification

1. Forward current : 60mA
2. Power dissipation : 100mW
3. Off-state output terminal voltage : 400V
4. Peak repetitive surge current : 1A
5. Reverse voltage : 3V
6. Excellent IFT stability
7. High isolation voltage

MOC3021 Opto-isolator TRIAC driver DIP 6 pins IC pack of 50pcs

Specification:

• Forward current : 60mA
• Power dissipation : 100mW
• Off state output terminal voltage : 400V
• Peak repetitive surge current : 1A
• Reverse voltage : 3V
• Excellent IFT stability
• High isolation voltage

Professional Anti Static Screwdriver Tool Kit pack of 6pcs

Specification

• Better performance
• Cheap and easy to use
• Highly insulated
• Manufacture from stainless steel
• Ergonomic soft-grip handle

Dual Stepper Motor Driver Module

Specifications:-

1. MADE IN INDIA
2. High noise immunity inputs.
3. Operating voltage:  5V to 12V
4. High noise immunity inputs.
5. Thermal Shutdown

Combo of Electric Tool Kit | Continuity Tester | Screwdriver | Wire Tape and | Tester & Voltage Testing Pen (5 Items)

Specification:-

• Length of tester: 140mm
• Color of the tester: Yellow
• length of screwdriver: 95mm
• Electrical screwdriver tester
• Stainless steel screwdriver
• Electrical PVC Insulation Tape
• Voltage Detector Sensor Tester Pen

74F244 Octal Buffers/Line Drivers with 3-State Outputs IC DIP-20 Package

Specification:-

• Number of pins: 20
• Supply voltage: 4.5V – 5.5V
• High-level input voltage: 2.0V
• Low-level input voltage: 0.8V
• Input clamp current: -18mA
• High-level output current: -15mA
• Low-level output current: 64mA
• Output current when low: 8mA

74HC244 Octal Buffer Line Driver IC DIP-20 Package

Specification:-

• Number of pins: 20
• Supply voltage: 2.0V – 6.0V
• Input Voltage: 7V
• 8-bit 3 states buffer
• Octal bus interface
• Non-inverting 3-state outputs
• Complies with JEDEC standard no. 7 A

74LS47 BCD to 7-Segment Decoder/Driver IC DIP-16 Package

Specification:-

• Number of pins: 16
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C 
• Storage temperature range: –65°C to +150°C

74LS244 Octal 3-State Buffer/Line Driver IC DIP-20 Package

Specification:-

• Number of pins: 20
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C
• Storage temperature range: –65°C to +150°C
• Typical enable/disable times 18 ns

74HC541 Octal 3-State Buffer/Line Driver IC DIP-20 Package

Specification:-

• Number of pins: 20
• Mounting: Through Hole
• Wide operating voltage range: 2V–6V
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Output Voltage (VOUT): − 0.5 to VCC + 0.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 500 mW
• Operating Temperature (°C): − 65°C to + 150°C

74HC240 Octal Buffer Line Driver IC DIP-20 Package

Specification:-

• Number of pins: 20
• Propagation Delay: 12ns
• Current Rating: 6 mA
• Input Voltage (VIN)  −1.5V to VDD + 1.5V
• Output Voltage (VOUT)  − 0.5 to VCC + 0.5V
• Low quiescent supply current: 80 µA
• Wide operating voltage range: 2 to 6V
• Operating Temperature (°C): − 40°C to + 85°C

CD4511 BCD To 7 Segment Latch Decoder Driver IC (DIP-16 Package)

Specification:-

• Max. input current of 1 µA at 18 V
• 5-V, 10-V, and 15-V parametric ratings
• High-output-sourcing capability up to 25 mA
• 7-segment outputs blanked for BCD input codes > 1001

UDN2981 8-Channel Source Driver IC (DIP-18 Package)

Specification:-

• No. of Channels: No of Output: 8
• Mounting Type: Through Hole
• Package: DIP-18
• No. of Pins: 18
• Current: 500mA
• Type: 8-Channel Driver IC
• Output voltage: 50V

TLC5940 16-Channel PWM Control LED Driver IC (DIP-28 Package)

Specification:-

• No. of Channels: 16
• CMOS Level I/O
• 30 MHz Data Transfer Rate
• Supply voltage range: 3.V to 5.5V
• Drive Capability: 0 mA to 60 mA (VCC < 3.6 V)
• Thermal error flagging

MC34152P MC34152 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: −0.3 to VCC V
• Gate Drive Output-Source Current: 1.5 A
• Maximum Power Dissipation = 50°C: 0.56 W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to +70 °C
• Storage Temperature Range: -65 to +150 °C

MC34151 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: −0.3 to VCC V
• Gate Drive Output-Source Current: 1.5 A
• Maximum Power Dissipation = 50°C: 0.56 W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to +70 °C
• Storage Temperature Range: -65 to +150 °C
• Two Independent Channels with 1.5 A Totem Pole Output

MC33153P Single IGBT Gate Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: VEE −0.3 to VCC V
• Current Sense Input: −0.3 to VCC V
• Blanking/Desaturation Input: −0.3 to VCC V
• Maximum Power Dissipation = 50°C: 0.56W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: -40 to 105 °C
• Storage Temperature Range: -65 to +150 °C

MC33151 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: VEE −0.3 to VCC V
• Totem Pole Sink or Source Current: 1.5 A
• Maximum Power Dissipation  = 50°C: 0.56 W
• Maximum Power Dissipation = 50°C: 1W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to 70 °C
• Storage Temperature Range: -65 to +150 °C

MAX488 RS-485/RS-422 Line Driver/Receiver IC (DIP-8 Package)

Specification:-

• Part Number: MAX488
• Pin Count: 8
• Data Rate: 0.25 (Mbps)
• Slew-Rate Limited
• Number Of Receivers On Bus: 32
• Quiescent current: 120 mA

L6219 Stepper Motor Driver IC (DIP-24 Package)

Specification:-

• Supply voltage: 50 V
• Output current (peak): +-1 V
• Output current (continuous): +-0.75 V
• Output current: 750 mA
• Logic supply voltage: 7 A
• Logic input voltage range: -0.3 to 7 V
• Sense Sense output voltage: 1.5 W
• Junction temperature: 150 °C
• Operating temperature range: -20 to 85 °C
• Storage temperature range: -55 to 150 °C

L298N Dual Full Bridge Driver IC Multiwatt-15 Package

Specification:-

• Supply voltage: 50 V
• Logic supply voltage: 7 V
• Ven-Input and Enable Voltage: -0.3 to 7 V
• Vsens-Sensing Voltage: -1 to 2.3
• Ptot-Total Power Dissipation: 25 W
• Junction temperature range: -25 to 130 °C
• Storage temperature range: -40 to 150 °C

IR2153 Self Oscillating Half Bridge Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side output voltage: -0.3 to VCC+0.3 V
• RT pin voltage: -0.3 to VCC+0.3 V
• Supply current (note 1): 25 mA

IR2113 High and Low Side Driver IC (DIP-14 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic Supply Voltage: -0.3 to VSS+25 V

IR2112 High and Low Side Driver IC (DIP-14 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic Supply Voltage: -0.3 to VSS+25 V

IR2111 Half Bridge Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic input Voltage: -0.3 to VSS+0.3 V

IR2110 High and Low Side Driver IC (DIP-14 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic supply Voltage: -0.3 to VSS+25 V

IR2104 Half Bridge Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic supply Voltage: -0.3 to VSS+0.3 V

IR2101 High and Low Side Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic supply Voltage: -0.3 to VSS+0.3 V

YX-360TR Multi-tester AC/DC voltage current resistance decibel fuse and diode protection meter tool for Non-magnetic electronic level

Specification

1. Best and the latest product
2. AC voltage measuring range: 10V to 1000V
3. DC voltage measuring range : 10V to 1000V
4. DC current measuring range : 0.25µA to 100µA
5. Reliable and easy to use
6. Overload protection

Lead-Acid Digital Battery Capacity Indicator Charge Tester 12V-60V DC Voltmeter

Specification:-

• Voltage Measuring Range: 12-60V DC
• Working Current: 5 ~ 15mA
• Material: Copper + ABS Plastic
• Body Color: Black
• Type: LED Voltage Voltmeter

PS817 General purpose photocoupler DIP 4 Pins IC pack of 50pcs

Specification:-

1. Advance technology
2. Input diode forward voltage  :  1.25V
3. Collector-emitter voltage  :   80V
4. Collector current :  50mA
5. Cut-off frequency :  80 kHz
6. Rise time  :  18us
7. Fall time  :  18us

DC-DC 0.9V to 5V Converter USB Step Up Power Boost Modules Mini PFM Control pack of 10pcs

Specification:-

1. 100% branded and high quality product
2. Input voltage  :  0.9V to 5V
3. Output voltage :  5V
4. Led indicator
5. Mini PFM control
6. High conversion efficiency

6 x 6 x 7mm Red color tactile momentary push buttons switches pack of 1000pcs

Specification

1. Type: Through-hole design.
2. Shaft Shape: Square
3. Mode of Operation   :  Tactile momentary
4. Number of pin : 4
5. Power Rating   :  MAX 50mA 24V DC
6. Insulation Resistance   :  100M ohm (Ω)
7. Operating Force  :  2.55±0.69 N
8. Dimensions are given at the image

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier module pack of 1pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power  :  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

TP4056 Micro USB 5V 1A Lithium battery charging module (b-type) pack of 1pcs

Specifications:-

1. Input supply voltage  ：-0.3V to 8V
2. Short-Circuit Duration  ：Continuous
3. BAT Pin Current  ：1200mA
4. PROG Pin Current  :  1200uA

DC-DC 0.9V to 5V Converter USB Step Up Power Boost Module Mini PFM Control pack of 1pcs

Specification:-

1. 100% branded and high quality product
2. Input voltage  :  0.9V to 5V
3. Output voltage :  5V
4. Led indicator
5. Mini PFM control
6. High conversion efficiency

SS12D00 0.3A 30V SPDT 3 pin metal body panel mount plastic handles slide switches pack of 100pcs

Specification:-

1. 100% Original and best quality product
2. Type  :  single pole, double throw
3. Mode of Operation   :  slide
4. Max. current withstand  :  125V
5. Max. power rating  :  0.5A
6. High temperature withstand
7. Long life approximately 10,000 clicks
8. High wear and tear properties
9. Durable and excellent design

SS13D07 0.3A 30V SP3T 4 pin metal body panel mount plastic handle slide switch pack of 5pcs

Specification

1. 100% Original and best quality product
2. Type:  single pole, triple throw ( one at a time)
3. Mode of Operation:  slide
4. Max. current withstand:  250V
5. Max. power rating:  1A
6. High temperature withstand
7. Long life approximately 10,000 clicks
8. High wear and tear properties
9. Durable and excellent design

6 x 6 x 6mm Red color tactile momentary push buttons switches pack of 1000pcs

Specification

1. Type: Through-hole design.
2. Shaft Shape: Square
3. Mode of Operation   :  Tactile momentary
4. Number of pin : 4
5. Power Rating   :  MAX 50mA 24V DC
6. Insulation Resistance   :  100M ohm (Ω)
7. Operating Force  :  2.55±0.69 N
8. Dimensions are given at the image

SS12F23G5 0.3A 30V SPDT 3 pin metal body panel mount plastic handle slide switches pack of 20pcs

Specification

1. 100% Original and best quality product
2. Type:  single pole, double throw
3. Mode of Operation   :  slide
4. Max. current withstand  :  250V
5. Max. power rating  :  1A
6. High temperature withstand
7. Long life approximately 10,000 clicks
8. High wear and tear properties
9. Durable and excellent design

SS12F23G5 0.3A 30V SPDT 3 pin metal body panel mount plastic handles slide switches pack of 100pcs

Specification

1. 100% Original and best quality product
2. Type:  single pole, double throw
3. Mode of Operation   :  slide
4. Max. current withstand  :  250V
5. Max. power rating  :  1A
6. High temperature withstand
7. Long life approximately 10,000 clicks
8. High wear and tear properties
9. Durable and excellent design

6 x 6 x 11mm Red color tactile momentary push buttons switches pack of 1000pcs

Specification

1. Type : Through hole design.
2. Shaft Shape : Square
3. Mode of Operation   :  Tactile momentary
4. Number of pin : 4
5. Power Rating   :  MAX 50mA 24V DC
6. Insulation Resistance   :  100M ohm (Ω)
7. Operating Force  :  2.55±0.69 N

KF128-5-2P 10A 2 pin 5.0mm pitch PCB mount terminal block connectors pack of 50pcs

Specification

1. Body material  :  Nylon 66
2. Metal use  :  phosphor bronze
3. Pitch spacing  :  5.00mm
4. Number of holes and pins  :  2
5. Type of connector  :  PCB mount terminal block
6. Rated voltage  :  250V
7. Current rating :  10A
8. Package contains  :  50 pieces

KF128-5-2P 10A 2 pin 5.0mm pitch PCB mount terminals block connectors pack of 500pcs

Specification

1. Body material  :  Nylon 66
2. Metal use  :  phosphor bronze
3. Pitch spacing  :  5.00mm
4. Number of holes and pins  :  2
5. Type of connector  :  PCB mount terminal block
6. Rated voltage  :  250V
7. Current rating  :  10A
8. Package contains  :  500 pieces

18650 Triple Lithium battery spacer hard plastic holders for DIY battery pack - 500 pieces

Specifications:-

1. 100% Branded and high-quality product
2. Holds three 18650 lithium batteries
3. Type: 18650 lithium battery spacer
4. High-quality plastic material
5. Convenient to use
6. High wear and tear properties
7. Durable and excellent design

6 x 6 x 7mm Red color tactile momentary push button switches pack of 200pcs

Specification

1. Type: Through-hole design.
2. Shaft Shape: Square
3. Mode of Operation   :  Tactile momentary
4. Number of pin : 4
5. Power Rating   :  MAX 50mA 24V DC
6. Insulation Resistance   :  100M ohm (Ω)
7. Operating Force  :  2.55±0.69 N
8. Dimensions are given at the image

GD4142 Dual USB 5V 1A DC to DC step up booster power bank charging modules pack of 10pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on back
6. Intelligent automatic shutdown

3V DC Small carbon brushed high torque motor pack of 2pcs

Specifications:-

• Operating voltage:  3V
• Recommended/Rated voltage:  3V
• Current at no load:  70mA
• No-load speed:  1800 rpm
• Loaded current:  250mA (approx.)

KF128-5-3P 10A 3 pin 5.0mm pitch PCB mount terminal block connectors pack of 500pcs

Specification

1. Body material:  Nylon 66
2. Metal use:  phosphor bronze
3. Pitch spacing  :  5.00mm
4. Number of holes and pins  :  3
5. Type of connector  :  PCB mount terminal block
6. Rated voltage  :  250V
7. Current rating  :  10A
8. Package contains  :  500 pieces

KF128-5-3P 10A 3 pin 5.0mm pitch PCB mount terminal block connector pack of 10pcs

Specification

1. Body material  :  Nylon 66
2. Metal use  :  phosphor bronze
3. Pitch spacing  :  5.00mm
4. Number of holes and pins  :  3
5. Type of connector  :  PCB mount terminal block
6. Rated voltage  :  250V
7. Current rating  :  10A
8. Package contains  :  10 pieces

3 USB 5V 1A Mobile power bank charger controllers modules pack of 50pcs

Specification:-

1. Charging Voltage:  5V DC
2. Charging Current:  1000mA or 1A
3. LED indication is provided
4. USB Output Voltage:  DC 5V
5. USB Output Current:  1200mA
6. Charging Interface  : 3 Micro USB port

CD4060 14 stage binary ripple counter 16 pin IC pack of 2pcs

Specification

1. 14-bit Binary counter or Divider IC
2. Counting range :  0 to 16383 (In decimal)
3. Operating voltage:  3V to 18V
4. Number of pins: 16
5. Maximum clock frequency: 30MHz at 15V
6. Medium speed operation :  8MHz at VDD = 10V

BT136-600D Transistors Max 600V 4A pack of 10pcs

Specifications

1. Maximum terminal current : 4A
2. On-state gate voltage : 1.4V
3. Gate trigger current : 10mA
4. Max terminal voltage : 600 V
5. Holding current : 2.2mA
6. Latching current : 4mA
7. Package includes : 10 pieces

TIP31 Medium power NPN transistor packs of 50pcs

Specification:-

1. Transistor type Medium power NPN transistor
2. Current gain  :  50
3. Maximum voltage across collector-emitter  :  100V
4. Maximum current allowed through collector  :  3A DC

40mm Insulated crocodile alligator clip or test clamps pack of 20 pair

Specifications

1. Length of the clip  :  40mm.
2. 100% Brand new and high quality.
3. Easy and quick to connect.
4. Rubber insulated.
5. Attractive design and strong teeth for attachment.
6. Easy flow of current.
7. 40 clips (20 clips of red and 20 clips of black)

3 USB 5V 1A Mobile power bank charger controller modules pack of 10pcs

Specification:-

1. Charging Voltage  :  5V DC
2. Charging Current  :  1000mA or 1A
3. LED indication is provided
4. USB Output Voltage  :  DC 5V
5. USB Output Current  :  1200mA
6. Charging Interface  : 3 Micro USB port

0.56 inch 1 digit red display color 7 segment LED display COMMON ANODEs pack of 20pcs

Specification:-

1. Number of digits: 1
2. Display type: 7 segment
3. Configuration: common anode
4. Number of pins: 10
5. LED color: RED
6. Operating current: 10mA
7. Length of the LED: 19mm
8. Width of the LED: 13mm