Linear Magnetic Hall Effect Sensor Module

Specifications:-

• Adjustable sensitivity
• Fine technology used to make it
• Has the signal output instructions. Single signal output.
• Single Channel Signal Output

11 mm Reed switch magnetic sensor pack of 2pcs

Specification

1. Hard glass protection
2. Small, cheap and easily available
3. Current Rating :  0.1a
4. Power/Voltage :  30v dc
5. Switch Configuration :  SPST
6. Package includes : 5 pieces

20 mm Reed switch magnetic sensor pack of 2pcs

Specification

1. Hard glass protection
2. Small, cheap, and easily available
3. Current Rating :  0.1a
4. Power/Voltage :  30v dc
5. Switch Configuration :  SPST
6. Package includes : 5 pieces

11 mm Reed switch magnetic sensors pack of 10pcs

Specification

1. Hard glass protection
2. Small, cheap, and easily available
3. Current Rating :  0.1a
4. Power/Voltage :  30v dc
5. Switch Configuration :  SPST
6. Package includes : 20 pieces

11 mm Reed switches magnetic sensors pack of 100pcs

Specification:

• Hard glass protection
• Small, cheap, and easily available
• Current Rating : 0.1a
• Power/Voltage : 30v dc
• Switch Configuration : SPST
• Package includes : 100 pieces

20 mm Reed switch magnetic sensors pack of 10pcs

Specification

1. Hard glass protection
2. Small, cheap, and easily available
3. Current Rating :  0.1a
4. Power/Voltage :  30v dc
5. Switch Configuration :  SPST
6. Package includes : 20 pieces

20 mm Reed switches magnetic sensors pack of 100pcs

Specification:-

1. Hard glass protection
2. Small, cheap, and easily available
3. Current Rating:  0.1a
4. Power/Voltage:  30v dc
5. Switch Configuration:  SPST
6. The package includes: 100 pieces

100V Wired Door Window Sensor Magnetic Switch For Home Alarm System (25 x10 x 5)mm pack of 2 pcs

Specification

1. Material: plastic
2. Color: white
3. Voltage: 100V
4. Rated Power (W): 10 watts
5. Cable length:  27 cm
6. Dimensions:  25 x 10 x 5 mm

100V Wired Door Window Sensor Magnetic Switch For Home Alarm System (25 x10 x 5)mm pack of 10 pcs

Specification

1. Material: plastic
2. Color: white
3. Voltage: 100V
4. Rated Power (W): 10watt
5. Cable length:  27 cm
6. Dimension:  25 x 10 x 5 mm

100V Wired Door Window Sensor Magnetic Switch For Home Alarm System (25 x10 x 5)mm pack of 100 pcs

Specification

1. Material: plastic
2. Color: white
3. Voltage: 100V
4. Rated Power (W): 10watt
5. Cable length:  27 cm
6. Dimensions:  25 x 10 x 5 mm

PIR Motion Detector Sensor Module

Specifications:-

1. Detection Range: Usually between 16 and 23 feet (5 to 7 meters)
2. The angle of detection: is typically 120 degrees
3. Operating Voltage: Typically between 3.3 and 5 volts DC
4. Sensitivity Adjustment: Frequently features sensitivity settings that can be changed.
5. Output Signal: Digital (High/Low) or Analog (Voltage)

Snow Raindrops Humidity Rain Weather Detect Sensor Module For Arduino

Specifications:-

1. Operating voltage : 3.3V to 5V
2. Distribution bit to adjust sensitivity
3. A fixed bolt hole for easy installation
4. Power indicator, the output signal LED indicator
5. A large area of ​​rain board, more appropriate to detect rain
6. Board with positioning holes to facilitate installation

TCS3200 Color Recognition Sensor Module

Specification

1. Sensor Type: Color Recognition Sensor (TCS3200).
2. Voltage Range: 2.7V - 5.5V.
3. Output Formats: RGB, HSV, and Grayscale.
4. Compact and Lightweight Module.

OV7670 Camera Image sensor module

Specifications:-

1. Photosensitive Array: 640 x 480.
2. IO Voltage: 2.5V to 3.0V.
3. Operating Power: 60mW/15fpsVGAYUV.
4. Sleeping Mode: <20μA
5. Lens Size: 1/6″.
6. Vision Angle: 25 degrees.
7. Max. Frame Rate: 30fps VGA.
8. Electronic Exposure: 1 to 510 row.
9. Pixel Coverage: 3.6μm x 3.6μm.
10. Duck Current: 12 mV/s at 60℃.

Water Sensor Module for Arduino Moisture / Drop / Depth of Water Test - Red

Features:-

1. Sensor Type: Water sensor module.
2. Purpose: Detects moisture, water depth, or water drops.
3. Compatibility: Designed for Arduino and similar platforms.
4. Color: Red.
5. Versatile for various water-related applications in DIY electronics and projects.

Laser Transmitter Module For Arduino AVR PIC

Specifications 

1. Operating Voltage: 5V.
2. Output Power: 5mW.
3. Wavelength: 650nm (red laser).
4. Suitable for Arduino, AVR, and PIC microcontroller projects.

Soil Hygrometer Humidity Detection Moisture Sensor For Arduino

Specifications:-

1. Operating voltage: 3.3V to 5V
2. Dual output mode, analog output more accurate
3. With power indicator (red) and digital switching output indicator (green)
4. Having an LM393 comparator chip, stable

Pulse Sensor - Heart Rate Detector

Specifications:-

1. Biometric Pulse Rate or Heart Rate detecting sensor
2. Plug and Play type sensor
3. Operating Voltage: +5V or +3.3V
4. Current Consumption: 4mA
5. Inbuilt Amplification and Noise cancellation circuit.

MQ-2 Flammable gas and smoke detection sensor module

Specifications:-

1. Operating voltage:  5V DC
2. Interface type:  Analog and Digital
3. High sensitivity to smoke and combustible gasses like Hydrogen, LPG & Propane.
4. Low Cost
5. Stable & Long Life.
6. Board Power indication

MQ-3 Alcohol Ethanol and Breath gas detection module for Arduino

Specifications:-

1. IC name : LM393
2. Operating voltage : DC 3V to 5V
3. Response time: ≤10s (70% Response)
4. Recovery time: ≤30s (70% Response)
5. Heating resistance: 31Ω±3Ω
6. Heating current: ≤180mA
7. Heating voltage: 5V±0.2V
8. Heating power: ≤900mW
9. Detect voltage: ≤15V
10. Ambient temperature: -10℃ to 65℃
11. Humidity: ≤95%RH

Digital Capacitive Touch Switch Module For Arduino - TTP223B

Specifications:-

1. Power supply voltage(VCC): 2.0, 3, 5.5 V.
2. Output high VOH: 0.8VCC V
3. Output low VOL: 0.3VCC V
4. Response time (touch mode): 60 mS
5. Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
6. Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
7. Response time (low power mode): 220 mS
8. Size : 2.4 x 2.4

Flame Sensor infrared receiver ignition source detection module

Specifications:-

1. Output channel : 1
2. Power supply : 3.5V to 5V
3. High Photo Sensitivity
4. Fast Response Time
5. Sensitivity adjustable
6. Working voltage : 3.3V to 5V
7. Detect range : 60 degrees
8. Digital/Analog output
9. On-board LM393 chip

Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducer Sensor DC 5V 2-450cm

Specification:-

1. Operating voltage: 5V DC
2. Operating current: 15mA
3. Measure angle: 15°
4. Ranging distance: 2cm - 400cm
5. Working frequency: 40Hz
6. Trigger input signal: 10uS TTL pulse
7. Echo output signal: Input TTL lever signal and the range in proportion
8. Working voltage : 5V(DC)
9. Static current: Less than 2mA.
10. Output signal: Electric frequency signal, high-level 5V, low-level 0V.

R307 Optical Fingerprint Reader Sensor Module

Specification:-

1. Type: Optical
2. Sensor Life: 100 million times
3. Static indicators: 15KV
4. RS232 communication baud rate: 9600BPS~115200BPS changeable
5. Image Capture Surface 20*15(mm)
6. Verification Speed:  0.2 sec
7. Scanning Speed: 0.3 sec
8. Character file size:  256 bytes

Microphone Sound Sensor, Voice Sensor High Sensitivity Sound Detection, Whistle Module

Specification:-

1. Operating voltage : 3.3V to 5V DC
2. LM393 comparator with threshold preset
3. Induction distance: 0.5 Meter
4. Operating current:  4 to 5 mA
5. Microphone sensitivity (1kHz): 52 to 48 dB
6. Easy to use with Microcontrollers or even with normal Digital/Analog IC

ACS712 - 5A range Current detector Sensor Module

Specifications:-

1. Module Dimensions: 31 x 13 x 14 mm (LxWxH)
2. Weight: 3 gm.
3. Supply Voltage: 4.5V~5.5V DC
4. Measure Current Range: -5A~ 5A
5. Sensitivity: 66mV/A
6. The current sensor chips: ACS712_ELC-05B.
7. Pin 5V power supply, on-board power indicator.

TSOP1738 Infrared receiver 3 pin (SM0038) pack of 2pcs

Specification

1. Working voltage  :  5V
2. IR signal detection range  :  38khz
3. Operating current  :  5mA
4. High Range and wide coverage area.
5. Low power consumption
6. Has in-built pre amplifier
7. Package includes : 2 pieces

Light dependent resistors sensor 12 mm (LDR) GL12528 pack of 2pcs

Specification:-

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  250V
5. Max. power  :  200W
6. Package includes : 5 pieces

TCRT5000 Dual Channel Line Tracking sensor module

Specifications:-

1. Module model : TCRT5000
2. Working voltage : DC 3.5V to 5V
3. Output channel : 0/1
4. Detect distance : 1-25mm
5. Focal distance : 2.5mm
6. IC name : LM393
7. Inbuilt indicator light
8. Also, built in potentiometer for sensitivity

IR Proximity Sensor for Line Follower

Specifications:-

1. Operating voltage : 3.6V to 5V DC
2. Digital output : logic one (+3.5V DC) logic zero (0V DC)
3. Mounting hole size : 3mm
4. IC model name : 393
5. Distance measuring range : 2cm to 30cm
6. Effective distance range : 2cm to 80 cm

27 mm diameter Piezoelectric sensor plate pack of 5pcs

Specification

1. Converts Mechanical Force Into Electrical Output
2. Impedance value  :   ≤500Ω.
3. Low soldering temperature.
4. Strain sensitivity  :  5V/µƐ
5. Package includes : 5 pieces

9 mm Electret condenser microphone sound sensors pack of 20pcs

Specification:-

1. Operating Voltage  :  2V to 10V
2. Current consumption  :  0.5mA (max)
3. Recommended operating voltage  :  2V
4. Operating Frequency  :  20Hz to 16,000Hz
5. Impedance  :  <2.2kΩ
6. Package includes : 20 pieces

9 mm Electret condenser microphone sound sensor pack of 5pcs

Specification:-

1. Operating Voltage  :  2V to 10V
2. Current consumption  :  0.5mA (max)
3. Recommended operating voltage  :  2V
4. Operating Frequency  :  20Hz to 16,000Hz
5. Impedance  :  <2.2kΩ
6. Package includes : 5 pieces

Light dependent resistor sensor 5 mm (LDR) GL5528 pack of 5pcs

Specification

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap, and easily available
4. Max. voltage  :  150V
5. Max. power  :  90W
6. Package includes : 5 pieces

Infrared Obstacle Avoidance Sensor Module

Specifications:-

1. Working voltage : 3V to 5V DC
2. Screw holes : 3mm
3. IC name: LM393
4. Inbuilt indicator lights
5. Easy to assemble and use
6. Onboard detection indication
7. The effective distance range of 2cm to 80cm
8. Preset knob to fine-tune distance range

9 mm Electret condenser microphone sounds sensors pack of 100pcs

Specification:-

1. Operating Voltage  :  2V to 10V
2. Current consumption  :  0.5mA (max)
3. Recommended operating voltage  :  2V
4. Operating Frequency  :  20Hz to 16,000Hz
5. Impedance  :  <2.2kΩ
6. Package includes : 100 pieces

BFD-1000 5 channel line follower sensor module

Specifications:-

1. Detecting distance: 0-4cm (black line sensor) 0-5cm (adjustable distance detection)
2. Input voltage: 3.0-5.5V
3. Output Type: Digital output (high and low)

TTP223 Digital Capacitive Touch Switch Module-red Pack of 20

Specifications:-

1. Supports momentary or latching/toggle modes.
2. Supports Active High or Active Low output signal modes.
3. Input voltage : 2V to 5.5V DC
4. The response time max: 60mS in fast mode, ~220mS at low power mode @VDD=3V.
5. Sensitivity can adjust by the capacitance(0~50pF).
6. Have two kinds of sampling length by pad option

TTP224 - 4 channel Digital capacitive touch sensor module

Specifications:-

1. Onboard TTP224 capacitive touch sensor IC's
2. 4 board-level sensor indicator
3. Working voltage: 2.4V - 5.5V
4. Low power selection

TTP226 - 8 Channel capacitive touch sensor module

Specifications:-

1. Onboard TTP226 capacitive touch sensor IC
2. 8 board-level sensor indicator
3. Working voltage: 2.4V - 5.5V
4. Low power selection

TTP229 - 16 Channel capacitive touch sensor module

Specifications:-

1. Onboard TTP229 capacitive touch sensor
2. Operating voltage 2.4V~5.5V.
3. Built-in regulator.
4. Operating current = 3V no load.
5. At fast mode typical 9.0uA
6. The response time about 100mS at fast mode, 200mS at low power mode

MQ-4 Methane and smoke gas detector sensor module

Specifications:-

1. Operating voltage : 3V to 5V
2. Wide detecting scope
3. Fast response and High sensitivity
4. Stable and long life
5. Detect/Measure : Methane, Natural gases, etc.

MQ-5 Gas leakage detection sensor module

Specifications:-

1. Working voltage: 3V to 5V
2. Detecting concentration: 10000ppm
3. Sensing Resistance: 60kΩ
4. Heating consumption: 800mW

MQ-6 Butane, LPG and smoke detection sensor module

Specifications:-

1. Operating Voltage: +5V
2. Can be used to detect LPG or Butane gas
3. Analog output voltage: 0V to 5V
4. Digital Output Voltage : 0V or 5V (TTL Logic)
5. Preheat duration 20 seconds
6. Can be used as a Digital or analog sensor

MQ-7 Carbon monoxide gas detection sensor module

Specifications:-

1. Sensor type: semiconductor
2. Target gas: carbon monoxide
3. Detection range: 10～500ppm CO
4. Working voltage: 5V
5. Heat resistance: normal room temperature

MQ-8 Hydrogen gas detection sensor module

Specifications:-

1. Sensor type : Semiconductor
2. Target gas : Hydrogen
3. Working voltage : 24V
4. Heater voltage : 5V
5. Detection range : 100～1000ppm(H2 gas)

MQ-9 Carbon monoxide, Methane and LPG gas detection sensor module

Specifications:-

1. Operating voltage : 5V
2. Heat consumption : 340mW
3. Heat resistance : 33Ω±5%
4. Sensing resistance : 2 - 20000Ω
5. Detecting concentration : 10000ppm

MQ-135 Air quality and Gas detection sensor module

Specifications:-

1. Wide detecting scope
2. Fast response and High sensitivity
3. Stable and long life
4. Operating voltage : 3V to 5V
5. Detect/Measure NH3, NOx, alcohol, Benzene, smoke, CO2, etc.

ACS712 - 20A range current detection sensor module

Specifications:-

• Measures both AC and DC current
• Provides isolation from the load
• Easy to integrate with MCU, since it outputs analog voltage
• Scale factor : 100mV/Amp

ACS712 - 30A range current detection sensor module

Specifications:-

• Measures both AC and DC current
• Provides isolation from the load
• Easy to integrate with MCU, since it outputs an analog voltage
• Scale factor : 66mV per Amp

ACS712 - 10A range current detection sensor module

Specifications:-

• Measures both AC and DC current
• Provides isolation from the load
• Easy to integrate with MCU, since it outputs an analog voltage
• Scale factor : 150mV/Amp

P43 - Liquid and Water level float switch sensor module

Specifications:-

1. Maximum Load: 50 W
2. Max Switching Voltage: 100V DC
3. Minimum Voltage: 250V DC
4. Maximum Switching Current: 0.5 A
5. Max Load Current: 1.0 A
6. Max Contact Resistance: 0.4 ΩTemp Rating: -20~ 80 degree

Voltage detection sensor module 25V

Specifications:-

1. Input Voltage: 0 to 25V
2. Voltage Detection Range:  0.02445 to 25
3. Analog Voltage Resolution: 0.00489V
4. Needs no external components
5. Easy to use with Microcontrollers
6. Small, cheap, and easily available

GP2Y1010AU0F Dust and smoke particle detection sensor module

Specifications:-

1. Sensitivity : 0.5V/(100μg/m3)
2. Measurement range : 500μg/m3
3. Power : 2.5V to 5.5V
4. Operating current : 20mA(max)
5. Operating temperature : -10℃ to 65℃

Reed switch sensor module

Specifications:-

1. Working voltage: 3.3V ~ 5V
2. Current: Up to 1.2A
3. Comparator output
4. Clean signal
5. Great waveform
6. Strong driving ability
7. Digital switch output (0 and 1)

MPU6050 Gyroscope and Accelerometer sensor module

Specifications:-

1. 3-aixs accelerometer and 3-axis gyroscope values combined
2. Power supply : 3V to 5V
3. Communication : I2C protocol
4. Built-in 16-bit ADC provides high accuracy
5. Built-in DMP provides high computational power
6. Can be used to interface with other IIC devices like a magnetometer

SW520D - Tilt sensor module

Specifications:-

1. Supply voltage: 3.3 V to 5V
2. Maximum output current : 15mA
3. Can work on low voltages
4. Maximum operating temperature: 0°C to + 80°C
5. Easy interface
6. Long life

BMP180 - Digital barometer or Atmospheric pressure sensor module

Specifications:-

1. Low power consumption (3uA)
2. Pressure conversion time: 5msec
3. Potable size
4. Operating  voltage : 1.3V – 3.6V
5. Input voltage : 3.3V to 5.5V
6. Peak current : 1000uA

SW420 - Vibration detection sensor module

Specifications:-

1. Operating Voltage: 3.3V to 5V DC
2. Operating Current: 15mA
3. Bolt holes for easy installation
4. Small, cheap, and easily available
5. LEDs indicating output and power

BH1750 - Light detection or Lux sensor module

Specifications:-

1. Power Supply : 2.4V-3.6V
2. Less current consumption : 0.12mA
3. Measuring Range : 1 - 65535lx
4. Very small effect of IR radiation
5. Responsive near to the human eye.

LM393 Photosensitive light dependent resistor LDR sensor module

Specifications:-

1. Operating voltage : 3.3V-5V
2. Power indicator : Red
3. Digital switch output indicator : Green
4. Bolt hole for easy installation

MAX30100 - Pulse Oximeter Heart rate detector sensor module

Specifications:-

1. Working voltage: 1.8V to 5.5V
2. Integrated Ambient Light Cancellation
3. High Sample Rate Capability
4. Fast Data Output Capability
5. Advanced Functionality Improves Measurement Performance

AD8232 - Electrocardiography or ECG sensor module

Specifications:-

1. Qualified for automotive application
2. Single-supply operation: 2.0 V to 3.5
3. Fast restore feature improves filter settling
4. Fully integrated single-lead ECG front end
5. Two or three-electrode configurations

KY032 - TSOP based Infrared obstacle avoidance proximity sensor module

Specifications:-

1. Distance detection: 2cm to 30cm
2. Working voltage: 3.3V to 5V
3. Low Power High immunity against ambient light.
4. TTL and CMOS compatibility.
5. Output active low.

HX711 - Load cell voltage amplifier sensor module

Specifications:-

1. Input voltage: ±40mV
2. Data accuracy: 24 bit
3. Refresh frequency: 10 to 80 Hz
4. Operating voltage : 2.7V to 5V DC
5. Operating current: 10 mA

MPX5010DP Pressure 0-10KPa transmitter sensor module

Specifications:-

1. Model name : MPX5010DP
2. Input voltage : 4.75V – 5.25V
3. Operating pressure range : 0 - 10k/pa
4. Pressure type : Differential
5. Number of pins : 6
6. Operating temp. range : -40°C to +125°C

A3144 - Hall effect detection sensor module

Specifications:-

1. Operating voltage: 5V DC
2. Output Current: 25mA
3. Power Consumption at Rest: 3mA
4. Detector type: Magnetic Sensing Hall effect
5. Detecting range: 7 mm
6. Easy to use with Microcontrollers
7. Small, cheap, and easily available

RCWL0516 - Microwave radar sensor module

Specifications:-

1. Operating Voltage : 28V
2. Operating Current : 2.8mA
3. Detecting Range : 5 - 9 m
4. Transmitting Power : 20mW

1K ohm ( Ω ) multi turn trimpot variable resistor 3296W-1-102LF pack of 5pcs

Specifications

1. Type                              : multi turn variable resistor
2. Resistance value        : 1K Ω
3. Tolerance                    : ±10 %
4. Temperature Range  : -55 °C to +125 °C
5. Rotational Life           : 200 cycles

2M ohm ( Ω ) multi turn trimpot variable resistor 3296W-1-205LF pack of 5pcs

Specifications:-

1. Type: multi-turn variable resistor
2. Resistance value: 2M Ω
3. Tolerance: ±10 %
4. Temperature Range: -55 °C to +125 °C
5. Rotational Life: 200 cycles

Light dependents resistor sensor 20 mm (LDR) GL20528 pack of 2pcs

Specification:-

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  500V
5. Max. power  :  500W
6. Package includes : 2 pieces

TSOP1838 Infrared receiver silver plating shield (1838B) pack of 5pcs

Specification:-

1. Operating voltage:  2.5V to 5.5V
2. IR detection:  38kHz
3. Operating current:  5mA
4. High range and wide coverage area
5. Improved immunity
6. The package includes: 5 pieces

5 mm infrared receiver black color 2 pin pack of 5pcs

Specification:-

1. Spectral range  :  700-1050
2. Light Current  :   ≥3mA
3. Breakdown Voltage  :  30
4. Maximum forward current   :  25mA
5. Power dissipation  :  100
6. Maximum reverse voltage  :  5V
7. Maximum Forward Voltage  :  1.2 V-1.3V
8. Package includes : 5 pieces

TSOP38238 Infrared receiver 3 pin pack of 5pcs

Specification:-

1. Operating Voltage  :  2.5V to 5.5V
2. Operating Current  :  350μA
3. Output Current  :  5mA
4. Carrier Frequency  :  40 kHz
5. Transmission Distance  :  40 m
6. Package includes : 5 pieces

MQ3 Alcohol, Ethanol and smoke detection sensor pack of 1pcs

Specification

1. High-quality aluminium oxide body
2. Operating voltage  :  5V
3. Sensing resistance  :  2kΩ to 20KΩ
4. Load resistance  :  200kΩ (Adjustable)
5. Heating consumption  :  lower than 750mW
6. Concentration scope : 200 to 10,000ppm

MQ4 Methane, CNG and flammable gas detection sensor pack of 1pcs

Specification

1. High quality aluminum oxide body
2. Operating voltage  :  5V
3. Target gas : Methane
4. Sensing resistance  :  2kΩ to 20KΩ
5. Load resistance  :  200kΩ (Adjustable)
6. Heating consumption  :  lower than 750mW
7. Concentration scope : 200 to 10,000ppm

MQ5 LPG and Natural flammable gas detection sensor pack of 1pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Target gas : LPG
4. Sensing resistance  :  2kΩ to 20KΩ
5. Load resistance  :  200kΩ (Adjustable)
6. Heating consumption  :  lower than 800mW
7. Concentration scope : 200 to 10,000ppm

MQ2 Methane, Butane, LPG and smoke detection sensor pack of 1pcs

Specification

1. High-quality aluminium oxide body
2. Operating voltage  :  5V
3. Sensing resistance  :  10kΩ to 30KΩ
4. Load resistance  :  20kΩ (Adjustable)
5. Heating consumption  :  lower than 800mW
6. Concentration scope : 200 to 10,000ppm

35 mm diameter Piezoelectric sensor plate pack of 5pcs

Specification:-

1. Converts Mechanical Force Into Electrical Output
2. Impedance value:   ≤500Ω.
3. Low soldering temperature.
4. Strain sensitivity:  5V/µƐ
5. The package includes: 5 pieces

A3144 Hall effect sensor pack of 2pcs

Specification

1. Operating voltage  :  5V
2. Output Current  :  25mA
3. Output voltage is equal to operating voltage
4. Operating temperature: -40°C to 85°C
5. Package includes : 5 pieces

AH49E Hall effect sensor pack of 2pcs

Specification

1. Power Consumption  :  3.5mA
2. Energy Efficient
3. Single Current Sourcing Output
4. Stable and Accurate Output
5. Temperature Range  :   -40oC to 85oC
6. Package includes : 2 pieces

GP2Y0A21YK0F - Sharp distance measuring sensor pack of 1pcs

Specification

1. Operating voltage  :   5V
2. Current consumption  :  30mA
3. Output type  :  analog voltage
4. Detection range  :  10 to 80 cm
5. Package includes : 5 pieces

NTC 10K metal oxide thermistor sensor pack of 5pcs

Specification:-

1. Thermistor temperature range -55 °C to 125 °C
2. Resistance  :   10K
3. Thermistor cost is economical
4. Good stability, durability in the environment
5. Copper leads have a coating of tin.
6. Package includes : 5 pieces

NTC 10K Glass oxide thermistor sensor pack of 5pcs

Specification

1. Glass body with steel wires
2. Operating temperature range  :  - 40℃ ~ +200℃
3. Designed for accurate temperature measurement
4. Fast thermal response time
5. Long term stability
6. Package includes : 5 pieces

NTC 10K wire thermistor sensor DS18B20 pack of 1pcs

Specifications:-

1. Programmable Temperature Sensor
2. 1-Wire method
3. Operating voltage  :   5V
4. Temperature range   :  -55°C to +125°C
5. The package include : single piece

DHT11 Temperature and humidity sensor pack of 1pcs

Specification

1. Operating Voltage  :  5V
2. Operating current  :  0.3mA
3. Temperature Range  :  0°C to 50°C
4. Humidity Range  :  20% to 90%
5. Package includes : 5 pieces

SEN0193 Digital capacitive soil moisture sensor V2.0

Specification:-

1. Operating Voltage: 3.3V - 5V.
2. Output: Digital signal.
3. Sensitivity Range: Adjustable.
4. Dimensions: 60mm x 20mm.

YFS201 water flow calculator sensor module

Specification:-

1. Module name  :  YF-S201
2. Sensor Type  :  Hall effect
3. Working Voltage  :  5 to 18V DC
4. Max current draw  :  15mA @ 5V
5. Output Type  :  5V
6. Working Flow Rate  :  1 to 30 Liters/Minute
7. Working Temperature range: -25 to +80℃

DHT11 Temperature and humidity detection sensor module

Specification:-

1. Operating Voltage:  3.5V to 5.5V
2. Operating current:   0.3mA
3. Output:  Serial data
4. Temperature Range  :  0°C to 50°C
5. Humidity Range:  20% to 90%

HMC5883L Magnetometer sensor module (GY273)

Specification:-

1. Operating voltage  :  3V to 6V DC
2. I2C interface
3. 1-2 degree heading accuracy
4. Integrated 12-bit ADC
5. 160Hz max data rate
6. Needs no external components
7. Easy to use module

LM393 Motor speed measuring groove coupler sensor module

Specification:-

1. Working voltage  :  3.3V to 5V
2. Output  :  digital switch output (0 and 1)
3. Equipped with a fixed bolt hole, easily install.
4. Small board PCB size  :  3.2 cm x 1.4 cm.
5. Use the LM393 wide voltage comparer.

MPR121 V12 Capacitive touch sensor controller module

Specification:-

1. Operating voltage  :  2.5V to 3.6V DC
2. 29μA supply current at 16ms sample period
3. Shutdown current  :  3μA
4. 12 electrodes
5. Operating temperature range  :  -40°C to +85°C