Combo of Science Project kit of DC Motor, Breadboard, Jumper wire, Resistor (147 Item)

Specifications:-

• 5mm round shape LED 
• 5v Piezoelectric Buzzer
• 50V Ceramic Capacitor 
• 8050 NPN transistor
• UNO R3 AVR USB Development-board
• GL-12 830 points breadboard 
• 10K Rotary potentiometer 14mm shaft 
• NE555 DIP-8/SOP-8 Timer IC
• Blue Short USB Data Charging Cable
• 7 segment 0.56 inch 1 digit display

Kit includes:- 

1 Pcs EB UNO R3 Board,1 Pcs Rotary Encoder Module, 1 Pcs DC Motor, 1 Pcs L9110 motor driver, 1 Pcs LCD1602, 1 Pcs I2C Interface Module, 1 Pcs Ultrasonic Distance Sensor, 1 Pcs 7-Segment Display, 1 Pcs NE555 Chip, 1 Pcs Passive Buzzer, 1 Pcs Active buzzer,1 Pcs RGB LED, 2 Pcs Photoresistance, 2 Pcs Thermistor, 2 Pcs Tilt Switch, 2 Pcs Switch 4 Pcs Red LED,4 Pcs Green LED, 4 Pcs Yellow LED, 4 Pcs Blue LED, 16 Pcs Resistor(220O), 10 Pcs Resistor(1 kO), 10 Pcs Resistor(10 kO), 10 Pcs Resistor(10 kO), 5 Pcs Capacitor(104), 2 Pcs Capacitor(10uF), 4 Pcs Button(large),8 Pcs Button(small), 1 Pcs Button cap(red), 1 Pcs Button cap(white), 2 Pcs Button cap(blue), 2 Pcs NPN Transistor(8050), 2 Pcs PNP Transistor(8550),2 Pcs Potentiometer(10KO), 1 Pcs 9V Battery Holder, 1 Pcs Breadboard, 1 Pcs USB Cable, 40 Pcs Male to Male Jumper Wires, 20 Pcs Male to Female Jumper Wires, 1 Pcs 4-Pin Wires,1 Pcs 5-Pin Wires,1 Pcs Band Resistor Card.

Combo of DC MotorBattery Rocker Switch & Flexible Wire Science Project Educational Kit (100 Item)

Specification:-

• 5mm round shape Led
• 2 Blade Fan Propeller
• 40mm diameter 4-blade propeller 
• 40mm Insulated crocodile alligator
• 1.5V Non rechargeable battery cell 
• 9V battery clip connector
• AA 2 cells Battery holder
• 3-pin slide switch
• Round Black Magnets

Kit includes:- 12 pcs LED (Red, Yellow, Green), 4 Pcs DC round motor, 4 Pcs core wire, 12 Pcs Rocker switch, 4 pcs slide switch, 12 Pcs resistor, 8 pcs ring Magnet, 4 Pcs 9vlt HYW battery, 8 pcs AA battery, 4 Pcs 9vlt connector, 8 pcs crocodile connecting clips, 4 Pcs plastic fan,4 pcs mini plastic fan, 4 Pcs Dc Toy motor, 4 Pcs Dc Double shaft round motor, 4 Pcs cell battery holder

Combo of Basic Learning Kit for DIY Experiments with ESP32 ESP-32S WiFi IOT Development Board (95 Item)

Specification:-

• ESP32 Development Board
• Sensor Modules
• 830 point Breadboard
• USB Cable
• Jumper Wire
• Electronic Resistors
• 5mm round LED

Package Included:- 1pcs * ESP32 Development Board, 1pcs * 0.96 inch OLED, 1pcs * DHT11 Temperature and Humidity Module, 1pcs * HC-SR501 PIR Motion Sensor, 1pcs * 5V 2-channel Relay Module, 1pcs * Photoresistor Module, 1pcs * Obstacle Avoidance Module, 1pcs* 830 Breadboard, 1pcs * Micro USB Cable, 10pcs * F-M DuPont Cable, 10pcs * F-F DuPont Cable, 10pcs * M-M DuPont Cable, 5pcs * LED Red, 5pcs*LED Yellow, 5pcs * LED Green, 2pcs * RGB LED, 1pcs *(10K) Potentiometer, 1pcs * Passive buzzer, 1pcs * Active Buzzer, 6pcs * Pushbutton Switches, 30pcs * Resistors (220R/1K/10K)

Combo of DIY Learning Kit Compatible with Arduino for Educational Purpose (113 Item)

Specification:-

• USB Development Board 
• Sensor Modules
• 830 point Breadboard
• Blue color USB Cable
• Jumper Wire
• Electronic Resistors
• 5mm round LED
• 5V Piezoelectric Buzzer

Package Included:- 5 pcs each LED (White, Yellow, Blue, Green, Red), 1 pcs RGB LED, 2 pcs Photoresistor, 1 pcs Thermistor, 2 pcs Diode Rectifier (1N4007), 2 pcs Transistor (TIP31), 1 pcs Tilt Switch, 5 pcs push Button (small), 1 pcs each (IC L293D ,IC 74HC595 ), 1 pcs Active Buzzer, 1 pcs Passive Buzzer, 1 pcs Potentiometer, 1 pcs Joystick Module, 1 pcs 5V Relay, 1 pcs UNO Controller Board, 1 pcs 830 Point Breadboard, 1 pcs Power Supply Module, 1 pcs Ultrasonic Sensor, 1 pcs 3V Servo Motor, 1 pcs Fan Blade, 10 pcs Female to Female Jumper Wire, 10 pcs Male to Male Jumper Wire, 1 pcs USB Cable, 10 pcs Resistor (220K), 10 pcs Resistor (330K), 10 pcs Resistor (1K), 10 pcs Resistor (10K)

Combo of IOT Starter Learning Kit Compatible with Electronic Component

Specification:-

• Ultrasonic Module
• 830 point Breadboard
• IR remote
• Jumper Wire
• 5V Piezoelectric Buzzer
• SG90 Small digital servo motor
• 3 Color SMD RGB LED sensor module

Package Included:- 1X Breadboard,1X Ultrasonic Sensor,1X Servo motor, 1X push button switch,1X RGB led module,1X 5V Buzzer, 1X 12V Buzzer, 1X Potentiometer (100K),1X Sound sensor,1X MQ2, 1X 5V Channel relay,1X DHT11, 1X Dc motor,1X Fan,1X IR receiver ,1X IR remote, 1X I2C 16x2 LCD,10X Male to Male Jumper wire, 40X Male to Female Jumper wire,1X Light dependent resistors (GL12528 )

Combo of Advanced Starter Kit Compatible with Arduino Projects with Instruction (245 Item)

Specification:-

• Ultrasonic Module
• 830 point Breadboard
• 40 pin Jumper Wire
• 5V Piezoelectric Buzzer
• Blue color USB Cable
• SG90 Small digital servo motor
• 3 Color SMD RGB LED sensor module
• 3.3V-5v Joystick Sensor Module 

Package Included:- 1 Pcs LCD 1602 Module, 1 Pcs Breadboard Expansion Board, 1 Pcs matrix keyboard module, 1 Pcs 830 tie points Breadboard, 1 Pcs Ultrasonic Sensor, 1 Pcs Servo Motor, 2 Pcs potentiometer (10K), 1 Pcs DHT-11 (Temperature and Humidity Sensor), 1 Pcs 5V 1AMP Power supply Adapter, 1 Pcs Touch Sensor, 1 Pcs 5vlt Relay, 1 Pcs Power supply Module, 1 Pcs Joystick Module, 1 Pcs ULN2003 Stepper Motor Driver Board, 1 Pcs IC 74HC595, 1 Pcs 4 Digit 7 segment Display, 1 Pcs 7 segment display, 1 Pcs Stepper motor, 1 Pcs Active Buzzer, 1 Pcs Passive Buzzer, 5 Pcs Small button switch, 1 Pcs Tilt switch, 2 Pcs 2N2222 transistors, 1 Pcs IR receiver, 1 Pcs RGB LED, 2 Pcs Photoresistor, 1 Pcs Thermistor, 2 Pcs Diode Rectifier, 1 Pcs fan with motor, ,1 Pcs USB cable, 1 Pcs IR remote control, 1 Pcs Development Board, 40 pin jumper wire (Male to Male, Male to Female) 40 pcs each, LED (Green, Blue, Red, White, Yellow) 5 pcs each Resistor (10k, 1k, 220Ω, 100Ω, 100KΩ, 10R, 2KΩ, 5.1KΩ, 1MΩ, 330Ω) 10 pcs each 

Combo of UNO Educational Starter Kit with Basic Component (134 Item)

Specification:-

• 5mm round shape LED 
• 5V beep buzzer
• Blue Short USB Data Charging Cable
• UNO R3 AVR USB Development Board 
• 400 points Half size Solderless breadboard
• 12 x 12 x 7mm push button switch 

Package Included:- 1 Pcs UNO R3 Controller Board, 1 Pcs USB Cable,1 Pcs Breadboard, 1 Pcs IC L293D, 1 Pcs Active Buzzer, 1 Pcs Tilt Switch ,1 Pcs Photoresist (GL12528), 6 Pcs Yellow LED, 6 Pcs Blue LED, 6 Pcs Green LED, 6 Pcs Red LED, 6 Pcs White LED, 2 Pcs RGB LED, 5 Push Button Switch, 10 Pcs Female-to-male DuPont Wire, Resistor 1/4 watt (1K, 10K, 100K, 220K, 15K, 330K, 22K, 1M) 10 pcs each

The Basic Starter kit for Arduino for UNO with Breadboard, LED, Resistor, Jumper Wires and Power Supply (201 Item)

Specification:-

• 5mm round shape LED 
• 5mm 4-pin RGB LED
• L293D 6-pin IC
• 5V 1-channel relay module 
• 5mm Mercury switch tilt angle sensor
• 12 x 12 x 7mm tactile push button switch
• 5v Piezoelectric Buzzer Beeper Alarm
• 10K potentiometer D shaft handle 3 pin
• DC 3.3V-5v Joystick Sensor Module
• UNO R3 USB Development board
• 830 point Solderless breadboard
• MB-102 3.3V/5V Power Supply Module
• HC-SR04 Ultrasonic Module
• Type 130 Miniature 6V DC Toy Motor 
• 26AWG Jumper Wire cable

Package Included: - LED (Red, Blue, Yellow, Green,  White) 5 x Pcs each,1 x Pcs RGB LED, 2 x Pcs Photoresistor (GL12528 ), 1 x Pcs NTC 10K thermistor, 2 x Pcs Diode Rectifier (1N4007), 2 x Pcs 220uf 10V Aluminum Electrolyte, 1 x Pcs Tilt Switch, 5 x Pcs push button switch, 1 x Pcs IC L293D, 1 x Pcs 5V Buzzer, 1 x Pcs 12V Buzzer, 1 x Pcs Potentiometer (10K), 1 x Pcs Joystick Module, 1 x Pcs 5V Relay, 1 x Pcs R3 Controller Board, 1 x Pcs 830 Point Breadboard, 1 x Pcs Power Supply Module, 1 x Pcs Ultrasonic Sensor, 1 x Pcs 3V DC Motor, 40 x Pcs Jumper Wire (male to male), 1 x Pcs USB Cable, 10 x Pcs Female-to-male jumper Wire, Resistor (10K, 100K, 220K, 330K, 1K, 22K, 15K, 27K, 4.7K, 1M) 10 x pcs each.

Combo of Smart Dustbin Project Kit for School College Project (26 Item)

Specification:-

• HC-SR04 Ultrasonic Sensor 
• UNO R3 CH340G development board 
• 9V battery clip connector
• 9V 6F22M Hi-Watt Non-rechargeable heavy duty battery 
• SG90  Hard plastic gear servo motor
• Blue Short USB Data Charging Cable

Component List: 1xPcs UNO Board, 1xpcs 9V Battery, 1xpc 9V battery Connector, 1xpcs Ultrasonic Sensor, 1xpcs SG90 Servo Motor, 1xpcs USB Cable, 20xpcs Female to Male Jumper wire

Combo of BO Motor, Yellow Wheel with UNO Board & Jumper Wire (40 Item)

Specification:-

• UNO R3 development board
• 11 mm Male Berg Strip1 x 40 Pin header 
• HC-SR04 Ultrasonic Sensor
• Male to male Jumper Wire cable
• L293D 4-Channel DC Motor Driver
• IR Proximity Sensor 
• 60mm x 25mm Hard plastic wheel

Package Included:- 1 pcs UNO Board, 1 pcs SG90 Servo Motor, 1 pcs 9V Toy Battery, 1 pcs 9V battery clip connector with 3.5mm pin jack, 1 pcs 40 pin Header, 2 pcs KCD1-B101 6A 250V AC Red Rocker switch, 1 pcs HC-SR04 Ultrasonic Sensor Mounting Bracket, 4 pcs BO motor, 20 pcs Jumper wire, 1 pcs L293D 4-Channel DC Motor Driver, 1 pcs Ultrasonic Module HC-SR04, 1 pcs IR Proximity Sensor, 1 pcs USB Cable, 4 pcs 60mm x 25mm Hard plastic Yellow Wheel

Combo of Mega Robotic kit with Basic Component (162 Item)

Specification:-

• UNO R3 development board
• Blue Short USB Data Charging Cable
• 830 points Solderless breadboard
• SG90 Hard plastic gear servo motor
• 5V DC small stepper motor
• Light dependent resistors
• RC522 RFID Card Reader Module
• RTC I2c Modules DS1307 Digital Clock
• 5mm round shape  LED 

Package Included:- 1 Pcs UNO Controller Board, 1 Pcs Cable USB, 1 Pcs Breadboard, 1 Pcs16x2 LCD, 1 Pcs servo motor, 1 Pcs Stepper Motor 1 Pcs motor driver circut, 1 Pcs Dot matrix display 32X8, 1 Pcs Module joystick, 1 Pcs RC522 RFID Card Reader Module with keychain, 1 Pcs 5v buzzer 1 Pcs 12V buzzer, 1 Pcs Module LED RGB, 1 Pcs DHT11 Temperature and humidity sensor 1 Pcs 5V 1 channel relay module 1 Pcs RTC I2c Modules DS1307 1 Pcs sound Sensor 2 Pcs Light dependent resistors(GL12528 ), 1 Pcs 1 Digit 7 Segment display 1 Pcs 4 Digit 7 Segment display, 4 Pcs push button switch with cap 2 Pcs LED RGB, 5 Pcs Red LED 5 Pcs Yellow LED, 5 Pcs Green LED 1 Pcs Water Sensor Module 1 Pcs Potentiometer(100KΩ) 1 Pcs IC L293D 1 Pcs 1N4007 Diode 2 Pcs NTC 10K Glass oxide thermistor 1 Pcs 40 Pin header 10 pcs 1K Resistor 10 pcs 10K Resistor 10 pcs 100K Resistor 10 pcs 220K Resistor, 40 Pcs Jumper wire (Female to Female) 40, Pcs Jumper wire (male to Female) 

Electronic Starter Kit Combo for Arduino with Breadboard | LED | Resistor | Capacitor | Power Module (298 Items)

Specification:-

• 5V Piezoelectric Buzzer
• 400 points Half-size breadboard 
• 3.3V/5V Breadboard Power Supply Module
• Female-to-Female Jumper Wire 
• 1 x 40-pin header 
• 1/4-watt Resistors
• Multilayer Ceramic Capacitor
• 2N2222 General purpose NPN transistor  
• 5mm Oval Shape Dip LED

Package Included:- 1 pcs Power Suppy Module, 1 pcs Breadboard, 65 pcs Jumper Wires, 20 pcs M/F Dupont Wire, 1 pcs 5V Buzzer, 2 pcs 40 Pin Header, 1 pcs IC L293D, 1 pcs Precision Potentiometer, 1 pcs IC4N35, 1 pcs 12V Buzzer, 1 pcs RGB LED, 2 pcs Photoresistor (GL5528 ), 1 pcs Thermistor, 10 pcs Elecytolytic Capacitor 0.22 uF 50V, 10 pcs Electrolytic Capacitor 0.1 uF 50V, 10 pcs (12 x 12 x 5mm) Switch Button, 10 Pcs each (Red, White, Yellow, Green, Blue), 5 pcs NPN Transistor (2N2222 ), 5 pcs Diode Rectifier (1N4007), 5 pcs 0.1uF Ceramic Capacitor, 5 pcs 0.22uF Ceramic Capacitor, 100 pcs 1/4W 10 Pcs Each Value Resistor (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

Combo of Jumper wire with UNO Board & Ultrasonic Sensor (123 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 

Package Included:- 40 pcs Male to Male Jumper wire, 40 pcs Female to Female Jumper wire, 40 pcs Male to Female Jumper Wire, 1 pcs Ultrasonic Sensor, 1 pcs USB Cable, 1 Pcs UNO Board

Combo of Jumper wire with L293D Motor Drive & UNO Board (123 Item)

Specification:-

• Driver module : L298N
• Driver chip : Double H bridge
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 

Package Included:- 40 pcs Male to Male Jumper wire, 40 pcs Female to Female Jumper wire, 40 pcs Male to Female Jumper Wire, 1 pcs L298N Motor Driver, 1 pcs USB Cable, 1 Pcs UNO Board

Combo of Jumper wire with SG90 small Motor & Ultrasonic Module (122 Item)

Specification:-

• Ultrasonic Module HC-SR04 
• Operating voltage: 5V DC
• Operating current: 15 mA
• SG90 Hard plastic gear servo motor
• 40 Pin Female to Female Jumper Wire
• 40 Pin Male to Male Jumper Wire
• 40 Pin Male to Female Jumper Wire

Package Included:- 1 x SR04 Ultrasonic sensor , 1 x SG90 Servo Motor, 40 x Female to Female Jumper Wire, 40 x Male to Male Jumper Wire, 40 x Male to Female Jumper Wire

Combo of Jumper Wire with UNO Board & Battery Clip Connector (43 Item)

Specification:-

• Model name: UNO R3
• UNO R3 CH340G development board 
• Blue Short USB Data Charging Cable
• 9V battery clip connector with 3.5mm pin jack
• 26AWG 40-pin Jumper Wire cable

Package Included:- 1 x 40 Pcs Male to Female Jumper wire, 1 x UNO Board, 1 x 9V Battery Connector, 1 x USB Cable

Combo of Nano R3 CH340 Development Board with Jumper Wire & Ultrasonic Module HC-SR04 (123 Item)

Specification:-

• Model name : NANO R3
• Recommended operating voltage range : 5V to 12V
• Digital input/output pins : 14 (of which 6 provide PWM output)
• Clock frequency : 16MHz
• Operating voltage: 5V DC
• Measure angle: 15°
• Operating current: 15mA
• Working voltage : 5V(DC)

DIY Water Pump Combo Kit Jumper Wires | 5V Relay & 1m PVC Tubing (62 Items)

Specification:-

• Jumper Wires
• 5V 1-Channel Relay
• DC Mini Water Pump
• 1-meter Flexible PVC Tubing
• Relay Module Functionality
• Compact Water Pump
• Flexible PVC Tubing

Component List: 1 Pcs 5V Relay Module, 1 Pcs DC Mini water pump with 1M Tubing Pipe, 20 pcs male-to-male jumper wire, 20 pcs male-to-female jumper wire, 20 pcs female-to-female jumper wire

DIY Combo Kit ESP8266MOD with Breadboard | Jumper Wires | BMP180 Sensor | OLED Display | USB Cable (85 Items)

Specification:-

• Tie points: 400
• ESP8266MOD NodeMCU Development Board
• BMP180 Atmospheric pressure sensor module
• 0.9-inch OLED Screen Display Module
• Male-to-Male 40-Pin Jumper wire
• Male-to-Female 40-Pin Jumper wire

Component List: 1 Pcs B-Type USB Cable, 1 Pcs ESP8266MOD Development Board, 1 Pcs BMP180 - Digital barometer, 1 Pcs OLED Screen Display Module 4-pin, 1 Pcs 400 points Half-size solderless breadboard, 40 Pcs Male-to-Female Jumper wire, 40 Pcs Male to Male Jumper wire

DIY Combo Kit with Jumper Wires, Development Board & 12V 5A Adapter (123 Items)

Specification:-

• Input Voltage: AC 100-240V
• Output Voltage: DC 12V, 5A
• Connector Size: 5.5mm x 2.5mm Male Plug
• High-quality PVC-coated flexible wires
• Microcontroller: ATmega328P
• Clock Speed: 16 MHz
• USB to Serial: CH340G

Package Included:- 1 Pcs USB Cable,1 Pcs R3 CH340 Development Board,1 Pcs 12V 5A Power supply Adapter,40 Pcs Male to Male Jumper Wire,40 Pcs Male to Female Jumper wire,40 Female to Female Jumper wire

Combo of XH-W1209 Temperature Controller | Probe | 3.5" 24V Cooling Fan | 12V 1A Power Adapter (5 Items)

Specification:-

1.XH-W1209

• Temperature Range: -50°C to 110°C
• Operating Voltage: 12V DC
• Temperature Control Mode: Heating & Cooling
• Accuracy: ± 0.1°C
• Relay Output: Supports up to 10A load

2. 24V DC Cooling Fan

• Operating Voltage: 24V DC
• Compact Size: 3.5 inches for versatile cooling applications
• High-Speed Airflow: Ensures efficient cooling for electronics and enclosures
• Low Noise Operation: Provides effective cooling with minimal noise
• Durable & Reliable Build: Ideal for continuous operation

3.DC Power Supply Adapter

• Input Voltage: AC 100-240V
• Output Voltage: DC 12V, 1A
• Connector Type: Standard 5.5mm x 2.1mm DC plug
• Short-Circuit & Overload Protection for device safety
• Lightweight & Compact Design for easy portability

Combo of Electronics DIY Kit | Breadboard | Jumper Wires | DHT11 Sensor | LCD Display & R3 Board (125 Items)

Specification:-

• DHT11 5V Sensor Module
• 16 x 2 LCD Green & Yellow display
• LCD Size : 16 x 2 (16 character x 2 rows)
• 400 point Breadboard 
• Breadboard Dimensions : 82mm x 55mm 
• R3 CH340G 5V development board 
• Model name : UNO R3 

DIY Fire Detector Project Kit with Water Pump | Learing Kit for School Project (27 Item)

Specification:-

• Model name : 6F22M
• High-performance battery
• Power Source: DC
• Working voltage:  6V to 12V
• Power current:  1.9A
• Output channel : 1
• Detect range : 60 degrees
• On-board LM393 chip

Package Included:- 1 Pcs PCB Board, 1 Pcs 9V Toy battery, 1 pcs battery clip connector, 1 pcs TIP 31C IC, 1 pcs multicolor Ribon Cable, 1 pcs Flame Sensor, 10 pcs 1/4w 1Ohm Resistor, 1 pcs Water pump with 1m PVC Tubing, 10 Pcs Female to Female Jumper wire

Combo of LM393 LDR Sensor Module with 5V 1 Channel Relay & Jumper Wire (12 Item)

Specification:-

• Operating voltage : 3.3V-5V
• Power indicator : Red
• Digital switch output indicator : Green
• Number of channels: 1
• Quiescent current: 2mA
• Trigger current: 20mA
• Relay maximum current:  10A

Package Included:-  1 Pcs 5V Relay Module, 1 Pcs LDR Sensor Modulem, 10 Pcs Female to Female Jumper wire

DIY Rain Sensor Kit for Science Experiment | Learning Kit (27 Item)

Specification:-

• Operating voltage : 3.3V to 5V
• Quiescent current: 2mA
• Model name : 6F22M
• Nominal voltage : 9V
• Power indicator, the output signal LED indicator
• Type: Piezoelectric Buzzer
• Length: 9.5mm
• Diameter: 12 mm
• Current: <25MA

Package Included:-  1 Pcs 5V Buzzer, 1 pcs 9V toy battery, 1 pcs 9v Battery clip connector, 5 pcs 10 Ohm Resistor, 5 pcs white 5mm LED, 10 Pcs Female to Female Jumper wire, 1 pcs TIP 31C IC, 1 pcs multicolor Ribon Color 1 pcs Rain Weather Detect Sensor, 1 pcs PCB Board

Combo of Electronics DIY Kit | 5V Relay | Mini Water Pump | Proximity Sensor | Jumper Wires (48 Items)

Specification:-

• Power Source: DC
• Material: Polyvinyl Chloride
• Power current:  1.9A
• Working voltage:  6V to 12V
• Digital output : logic one (+3.5V DC) logic zero (0V DC)
• Distance measuring range : 2cm to 30cm
• Effective distance range : 2cm to 80 cm
• Number of channels: 1
•  Supply voltage: 3.75V to 6V
• Current when the relay is active: 70m

Package Included:-  2 Pcs 9V Battery, 2 Pcs Battery Clip Connector, 1 Pcs 5V Relay Module, 40 Pcs Female to Female Jumper Wire, 1 Pcs DC Mini Motor Pump with 1M Tubing, 1 Proxmity Sensor

DIY Alcohol Ethanol and Breath Gas Dectection Kit|Science Project Kit (52 Item)

Specification:-

• IC name : LM393
• Operating voltage : DC 3V to 5V
• Ambient temperature: -10℃ to 65℃
• Working voltage: 6V to 12V
• Max. flow : 50 liter/hour

Package Included:- 1 Pcs 9V Battery, 1 Pcs 9V Battery Clip connector, 1 Pcs TIP 31C, 1 Pcs Multicolore Ribon Cable, 1 Pcs PCB Board, 1 Pcs water motor pump with 1M Pipe ,1 Pcs Gas Detection Module, 5 Pcs 1/4w 100 Ohm Resistor, 40 Pcs Female to Female Jumper wire

Combo of DIY Science Project Kit for Kids | DC Motor | Battery | Clip & Fan (40 Items)

Specification:-

• High-performance battery
• Nominal voltage : 9V
• Non-rechargeable
• Working voltage : 9V
• Power rating : 1A
• Length of the wire : 6cm
• DC Motor: Rated Voltage: 4V 
• Item Type: Mini Electric Moto
• DC motor has strong power

Package Included:-  10 Pcs 9V Toy Battery, 10 Pcs Battery Clip Connector, 10 Pcs DC 4V Motor, 3 Pcs Yellow 4 Blade Fan, 3 Pcs Green 4 Blade Fan, 4 Pcs Red 4 Blade Fan

Combo of MQ-2 Sensor LPG Gas Detector Project with Alarm (57 Item)

Specification:-

• Operating voltage: 5V DC
• Interface type:  Analog and Digital
• Copper clad coating PCB
• Dimension : 7.8cm x 5.1cm
• Board thickness : 1 mm
• High-performance battery
• Power rating : 1A
• Wire color : Red and Black
• Type: Piezoelectric Buzzer
• Length: 9.5mm
• Current: <25MA
• Resistance : 100 ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance : 5%
• Power rating: 1/4Watt

Package Included:-  1 Pcs PCB Board, 1 Pcs 9V battery, 1 Pcs Battery clip connector, 5 Pcs 1/4w 100 Ohm Resistor, 5 Pcs 5mm LED(1 Pcs each Red, Blue,Green,Yellow,White), 1 Pcs Multicolore Ribon Cable, 1 Pcs TIP42C IC, 1 Pcs 5V Buzzer, 1 Pcs Gas detection sensor, 40 Pcs Female to Female Jumper wire

Combo of Rain Detect Sensor for School Project with Jumper Wire|Water Pump & 5V Relay Module (43 Item)

Specification:-

• Working voltage: 6V to 12V
• Power current: 1.9A
• Max. flow : 50 liter/hour
• Distribution bit to adjust sensitivity
• 5V Relay Module – Enables seamless control of electrical devices based on sensor input.

Package Included:- 1 pcs 5V Relay Module, 1 pcs water pump, 1 pcs Rain detect Sensor, 40 pcs Female to Female Jumpere wire

Combo of LM393 LDR Sensor with 12V 2- Channel Relay Module & 40 Pcs Jumer wire (47 Item)

Specification:-

• Number of channels : 2
• Operating voltage : 12V
• Max. current : 20mA
• 40 Jumper Wires – Provides the necessary connections for easy circuit assembly.
• LM393 LDR Sensor – Detects light levels and triggers responses based on light intensity.

Package Included:- 2 Pcs 9V battery, 2 Pcs battery clip connector, 1 Pcs LDR Sensor Module, 1 Pcs 5V Buzzer, 1 Pcs 12V Relay Module, 40 Pcs Female to Female Jumper wire

Combo of Mini Water Pump & 9V Battery with Soil Moisture Sensor for Automatic Watering System Manager (47 Item)

Specification:-

• Operating voltage: 3.3V to 5V
• Power Source: DC
• Material: Polyvinyl Chloride
• Number of channels: 1
• Relay maximum current:  10A
• Length of the wire : 6cm
• Wire color : Red and Black

Package Included:- 1 Pcs 5V Relay Module 2 pcs 9V Battery 2 pcs Battery Clip Connector 1 Pcs Soil Moisture Sensor 1 pcs Water Pump with 1 Meter Tubing 40 pcs Female to Female Jumer wire.

Combo of DIY DC Motor Learning Science Experiment | Educational Kit For Kids (64 Item)

Specification:-

• High-performance battery
• Working voltage: 12V to 50V DC
• Material Safety: Non-toxic, lead-free components
• Current at no load:  70mA
• Max. current withstand  :  250V
• Max. Power Rating :  6A
• Long life approximately 10,000 clicks

Package Included:-  4 Pcs 3V Small Electric DC Toy Motor,1 Pcs 5V Buzzer,4 Pcs 4 Blade Fan Propeller, 3 pcs 9V Battery Clip Connector,4 pcs KCD1-B101 6A 250V AC Rocker Switch,1 Pcs 2 Cell Battery Holder,2 pcs 9V Battery,10 pcs 1K Resistor,5 Pcs 5mm Red LED,5 Pcs 5mm Blue LED,5 Pcs 5mm Yellow LED,5 Pcs 5mm Green LED,1 Pcs RGB LED,1 Pcs Screw Base Torch Bulb with Holder,1 Pcs Black wire 2M,1 Pcs Red wire 2M,1 Pcs 70mm x 70mm 6V 100mAh Solar Pannel,4 Pcs Crocodile Clip,1 Pcs 4V-12V DC Dynamo Motor,1 Pcs 4 Blade 96mm Fan Propeller ,1 Pcs 152mm 2 Blade Fan Propeller, 1 Pcs 152mm 3 Blade Fan Propeller,1 Pcs 134mm 3 Blade Fan Propeller,1 Pcs Push Button Horn Switch

Combo of DC Motor|Vibration Motor|Dual Shaft DC Motor|Science Project Kit for School (14 Item)

Specification:-

• Power Source: DC
• Material: Metal
• Dual Shaft Design
• Speed = ~8000 RPM
• Works fine in the range of 4V to 12V
• Type of Product: Mini Drone DC Dual Shaft Motor

Package Included:- 2 Pcs 4 Blade Fan, 1 Pcs 9V Battery Clip Connector, 1 Pcs 9V Battery, 1 Pcs DC Dynamo Motor, 1 Pcs 2 Blade fan, 1 Pcs Horn switch, 1 Pcs Rocker switch, 1 Pcs KAN-28 8mm switch, 1 Pcs 4.2V Dual Shaft DC Motor, 1 Pcs 4V Electric Toy Motor, 1 Pcs Micro N20 Vibration Motor, 1 Pcs Red wire (5M), 1 Pcs Black wire (5M)

Combo of DC Motor Learning Kit for Science Project Experiment|Educational STEM Activities Kit (68 Item)

Specification:-

• BO Motor Operating voltage:  3V to 9V
• Current at no load:  70mA
• Water Pump Power Source: DC
• Working voltage:  6V to 12V
• Power current:  1.9A
• Material: Metal, Copper
• Solar Panel Current range: 100mAh
• Output voltage: 6V
• Use of high-quality materials, quality assurance
• Rocker Switch Max. Power Rating  :  6A
• Long life approximately 10,000 clicks
• Max. Current Withstand  :  250V

Package Included:-

2 X Mini 16400 RPM DC Motors,1 X 3-12v DC Toy Motor,1 X 020 Micro Small Electronic DC Motor,1 X Cylindrical shape RC motor,1 X Dual Shaft DC Motor 8000 RPM, 4 X AA 1.5V Non rechargeable battery cell,8 X 5mm LED Blue,Green,Yellow,Red (Each 2 Pcs),1 X BC547 100mA NPN transistor,1 X LDR Sensor(GL5528),1 X 5v Piezoelectric Buzzer,1 X Red wire( 2M),1 X Black wire( 2M),1 X horn switch,1 X AA 2 cell battery holder,10 X  1/4 watt 1k Ohm Resistors, 1 X 152mm diameter 3 blade propeller, 1 X 6V-12V DC Mini water pump,2 X 35mm crocodile alligator clip,6 X 18mm x 4mm Round Black Magnets,1 X 70mm x 70mm 6V 100mAh solar panel,2 X 9V battery clip connector,1 X 2 linesplice push lock connector, 2 X 9V Battery, 4 X Motor Mounting brackets(28x25x30mm),2 X 60mm x 25mm wheel,2 X 75mm x 8mm wheel, 4 X KCD1-B101 6A 250V Rocker switch,1 X 40mm 4 blade propeller,2 X 30mm 2 blade propeller, 2 X Dual shaft  BO motor 

Ultimate Starter Learning Kit with HC-SR04 Ultrasonic Distance Sensor, LED Displays (128 Item)

Specifications:-

• Operating voltage: 5V DC
• Operating current: 15mA
• Color of display: Green
• Working frequency: 40Hz
• Output high VOH: 0.8VCC V
• Output low VOL: 0.3VCC V
• Response time (touch mode): 60 mS
• Size : 16 x 2 (16 character x 2 rows)
• Power supply voltage(VCC): 2.0, 3, 5.5 V.
• Thermistor temperature range -55 °C to 125 °C

Package Include:- 20 pcs LED 5pcs Each Value( Green, Yellow, Red, Blue), 1 pcs Ultrasonic Sensor, 1 pcs 1 Digit 7 Segment Display, 1 pcs 4 Digit 7 Segment Display, 1 pcs 16x2 LCD, 1 pcs SG90 Servo Motor, 1 pcs 5 mm infrared receive, 1 pcs LDR (GL5528), 1 pcs NTC 10K metal oxide thermistor, 1 pcs RGB LED,1 pcs 100 uf 25V Polarized electrolytic capacitor, 1 pcs Touch Switch Module, 2 pcs IC L293D,1 pcs DHT 11 Sensor,10 pcs Resistor ( 1K ), 10 pcs Resistor ( 10K), 10 pcs Resistor ( 22K), 10 pcs Resistor ( 100K), 3 pcs Potentiometer (10K, 4 pcs Push Button switch with Cap  (12x12x7mm), 1 pcs 5V Buzzer, 1 Pcs 12V Buzzer, 1 Pcs Breadboard, 20 pcs Male to Male Jumer wire , 20 pcs Male to Female Jumper wire, 1 pcs 5V 1 channel relay module, 1 pcs 3V DC Small carbon motor, 1 pcs 4 Blade fan,1 pcs Soil Hygrometer Humidity.

Combo of Jumper Wire & UNO Board with Ultrasonic Sensor Module (64 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 
• G90 Micro digital servo motor 

Package Included: 20 pcs Male to Male Jumper wire | 20 pcs Female to Female Jumper wire | 20 pcs Male to Female Jumper wire | 1 pcs Ultrasonic Sensor | 1 pcs USB Cable | 1 pcs SG90 Servo Motor | 1 pcs UNO R3 AVR USB Development board

Combo of DIY Starter Kit with UNO Board | Resistor & Jumper wire (113 Item)

Specification:-

• Resistor type: carbon film resistor
•  HC-SR04 Ultrasonic Sensor
• 400 points Half size Solderless breadboard 
• 10mm Yellow Dip Led round shape
• 9V battery clip connector
• UNO R3 CH340G development board
• Soil Hygrometer Humidity Detection Moisture Sensor 

Package Included: 1 pcs UNO Board | 1 pcs Breadboard | 1 pcs Ultrasonic Sensor | 1 pcs water sensor | 1 pcs USB Cable | 5 pcs Yellow LED | 5 pcs Red LED | 5 pcs Green LED | 1 pcs 9V battery connector | 2 pcs 1 Digit 7 segment Display | 1 pcs 5V Buzzer | 1 pcs Soil Hygrometer Humidity Sensor | 40 pcs Male to Female Jumper wire | 6 pcs push button switch with Cap (12x12x7mm) | 1 pcs IR Proximity Sensor | 10 pcs Resistor (1K) | 10 pcs Resistor (10K) 10 pcs Resistor | (22K) 10 pcs Resistor | (100K) 1 pcs LDR sensor module (LM393)

Ultimate UNO R3 Professional Starter Kit | Compatible with Arduino IDE | DIY Electronics Kit (160 Item)

Specification:- 

• Complete Ultimate Arduino Professional Kit with 100+ components.
• Includes an Uno R3 and a large breadboard with a power supply.
• 12 x 12 x 7 mm tactile switches
• ESP8266 Wireless WiFi Transceiver
• L293D 4-Channel DC Motor Driver
• Resistor type: 1/4 watt carbon film resistor
• Modules: ESP8266 Wi-Fi, Bluetooth, RC522 RFID, and IR Remote.
• Sensors: PIR, DHT11, Ultrasonic, IR, Soil, Raindrop, Touch, etc.

Kit Included:

Basic Project Starter Kit Compatible with Arduino IDE & Uno R3 | DIY Electronics Kit (127 Item)

Specification:-

• Includes an Uno R3 and 400 point breadboard
• 1602 LCD Display
• 12 x 12 x 7 mm tactile switches
• 5mm round dip LED (Red, Yellow, Blue
• 16 x 2 Blue/White color LCD display
• Blue Short USB Data Charging Cable
• 1/4W Resistor (220K, 330K, 1K, 22K, 15K) 10 Pcs Each Value of Resistor

Kit Included: 1 pcs Compatible Uno R3 Board | 1 pcs USB Cable | 1 pcs Breadboard Small Size with 400 Points (Solderless) | 3 pcs Push Button | 1 pcs Potentiometer 10K | 1 pcs 5V Relay Module | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs Passive Buzzer | 15 pcs LEDs (Assorted Colors – Red, Yellow, Blue) | 1 pcs DHT11 with PCB (4 pin) | 1 pcs Keypad 4×4 | 40 pcs Jumper Wire (Male to Male) | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K) | 1 pcs 1602 LCD Display | 1 pcs 40 Pin Header | 2 pcs NPN Transistor | 2 pcs Diode 1N4001 | 1 pcs RGB LED | 1 pcs Photoresistor | 1 pcs Shift Register

Level-2 Advanced Starter Kit Compatible with Arduino IDE & Uno R3 | RFID, Bluetooth & IoT Learning (114 Item)

Specification:-

• Complete Arduino Kit with 100+ components.
• Includes an Uno R3 and 830-point breadboard
• 12 x 12 x 7 mm tactile switch with cap
• Resistor type: 1/4 watt carbon film resistor
• SG90 Servo Motor
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• Resistor type: 1/4 watt carbon film resistor (220K, 330K, 1K)

Kit Included: 1 pcs Adruino Uno R3 | 1 pcs 830 Points Breadboard | 1 pcs USB Cable | 40 pcs Jumper Wires (Male to Male / Female to Male mix) | 1 pcs 1602 LCD Display | 1 pcs 7 Segment Display (1 Digit) | 1 pcs 4×4 Keypad | 1 pcs Stepper Motor | 1 pcs Stepper Motor Driver Module | 1 pcs Servo Motor (SG90) | 1 pcs Potentiometer (10K) | 1 pcs Active Buzzer | 1 pcs Passive Buzzer | 1 pcs IR Remote + IR Receiver | 1 pcs RTC (Real Time Clock) Module | 1 pcs RFID Module with Tag & Key | 1 pcs Joystick Module | 1 pcs Photoresistor (LDR Sensor) | 1 pcs Flame Sensor | 1 pcs Tilt Switch / Vibration Sensor (small module) | 1 pcs Sound Sensor Module | 1 pcs Water Sensor Module | 1 pcs DHT11 Temperature & Humidity Sensor | 1 pcs RGB LED Module | 1 pcs DC Motor Driver IC Module (L293D based) | 1 pcs 5V Relay Module | 1 pcs Battery Plug (9V Connector) | 30 pcs Resistor Pack (assorted values) | 15 pcs LEDs (Red, Green, Yellow)  | 5 pcs Push Button with Caps

Wireless IoT Starter Kit with NodeMCU ESP8266 | Compatible with Arduino IDE (237 Item)

Specification:-

• 1/4-watt Resistors
• 5V Piezoelectric Buzzer
• 830 points Half-size breadboard 
• 12 x 12 x 7 mm tactile switch
• USB Cable for Arduino Nano
• MB-102 Power Supply Module
• Wi Fi Networking Esp8266 Development Board

Package Included:- 1 pcs NodeMCU ESP8266 | 1 pcs Breadboard (Large) | 1 pcs Breadboard Power Supply Module | 5 pcs Push Button  | 1 pcs Potentiometer 10k | 1 pcs Photoresistor (LDR Sensor) | 1 pcs L293D Motor Driver IC | 3 pcs IC 74HC595 Shift Register | 4 pcs 2N2222 NPN Transistor | 25 pcs LEDs (White, Red, Blue, Yellow, Green)   | 1 pcs Fan (DIY Propeller) | 1 pcs DC Motor | 1 pcs 7 Segment Display (4 Digit) | 1 pcs Ultrasonic Sensor HC-SR04 | 1 pcs DHT11 Temperature & Humidity Sensor | 1 pcs SG90 Servo Motor | 1 pcs Passive Buzzer | 1 pcs Bar Graph LED Module | 1 pcs 5V Relay Module | 1 pcs RGB LED Module | 40 pcs Jumper Male-to-Male | 40 pcs Male-to-Female Jumper Wires | 1 pcs Bidirectional Logic Level Converter (Translator) | 2 pcs 1N4007 Diode | 1 pcs USB Cable | 1 pcs 9V Battery Holder with Connector | 100 pcs Resistor Pack (assorted values) (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

Super Mega 2560 Starter Kit | Complete Beginner’s Learning Kit Compatible with Arduino IDE (136 Item)

Specification:-

• MEGA2560 MCU REV3 development board
• 5mm round shape LED 
• SG90 Servo Motor
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• 12x12x7.3 mm Push Button Switch with Cap 
•  Yellow/Green LCD display module

Kit Included: 1 pcs Aadruino Mega 2560 Board | 1 pcs Mega 2560 Shield | 1 pcs Remote (IR Remote Control) | 1 pcs 1602 LCD Display | 1 pcs 830 Points Breadboard | 1 pcs 40 Pin Header | 1 pcs Potentiometer | 30 pcs LED (Red, Green, Blue) | 1 pcs USB Cable | 20 pcs Jumper Wires (Male to Male) | 20 pcs Jumper Wires (Female to Male) | 1 pcs 9V Battery Supply Connector | 4 pcs Push Button with Caps (Colored) | 1 pcs Stepper Motor with Driver | 1 pcs Mini Breadboard | 1 pcs Servo Motor (SG90 9G) | 1 pcs Active Buzzer | 1 pcs Passive Buzzer | 1 pcs 4-Digit 7 Segment Display | 1 pcs 1-Digit 7 Segment Display | 1 pcs IC 74HC595 | 1 pcs Flame Sensor | 1 pcs Photoresistor (LDR Sensor) | 1 pcs NPN Transistor | 1 pcs IR Receiver Module | 1 pcs Vibration Sensor / Tilt Sensor | 40 pcs Resistors – (1K, 10K, 220Ω, 330Ω)

3-in-1 Robotics Starter Kit | Multipurpose DIY Robot Kit | Compatible with Arduino Uno R3 (181 Item)

Specification:

• Includes an Uno R3 and a 400 point breadboard
• 12 x 12 x 7.3 mm tactile switch with cap
• ESP8266 Wireless Wi Fi Transceiver
• DC toy Motor Driver with wire
• 1 Digit 7 Segment LED Display
• Jumper Wire Cable 26AWG (21cm)
• Resistor type: 1/4 watt carbon film resistor
• Sensors: DHT11, Ultrasonic, etc.
• Complete Arduino Kit with 100+ components.

Kit Included: 1x Uno R3 Board | 1x Breadboard (400 points) | 1x 7 Segment Display (1 Digit) | 2x Push Buttons (with caps) | 1x Potentiometer | 1x DC Motor | 1x SG90 Servo Motor | 1x RGB LED Module | 2x Transistor PN2222 | 15x LEDs (Red, Green, Blue) | 1x Active Buzzer | 1x Passive Buzzer | 1x HC-SR04 Ultrasonic Sensor | 10x Resistors 220Ω | 10x Resistors 1kΩ | 40x Female-to-Female (F-F) Jumper Wires | 40x Male-to-Female (M-F) Jumper Wires | 40x Male-to-Male (M-M) Jumper Wires | 2x Diode 1N4001 | 1x Relay Module | 2x Line Sensor  | 2x Photoresistor Sensor  | 1x L293D Motor Driver Shield | 1x Battery Power Supply (with holder) | 1x Ultrasonic Sensor Holder | 1x 2WD Car Chassis

Nano Starter Kit | Compatible with Arduino IDE | Beginner DIY Electronics Kit (236 Item)

Specification:-

• Nano R3 development board
• 830-Point Solderless Breadboard
• HC-SR04 Ultrasonic Module
• 5mm LEDs: Assorted Color LEDs
• Switches & Controls: Push Buttons, Potentiometer
• Displays: 7-Segment Display, LED Bar Graph
• Transistors & Diodes: 2N2222 NPN Transistor, 1N4007 Diode
• Motor Driver & ICs: L293D Motor Driver, 74HC595 Shift Register

Kit Included:

1x Nano Microcontroller | 1x 830 Point Breadboard | 1x HC SRO4 | 5x Push Button | 1x Potentiometer | 2x 144007 Diode | 1x Photoresistor | 1x L2930 Motor Driver | 1x IC 74HC595 | 4x 2N2222 NPN Transistor | 25x LEDS | 1x USB Cable | 1x Fan  | 1x DC Motor | 1x 7 Segment 4 Digit | 1x Bar Graph | 1x Relay | 1x IR Receiver | 1x Passive Buzzer | 1x RGB | 1x Thermistor | 40x Jumper Pins Male to Male  | 40x Male to Female Wires | 1x IR Remote | 100x 1/4-watt Resistors (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

Beginner's Kit for Uno R3 | DIY Electronics & STEM Starter Kit | Compatible with Arduino IDE (57 Item)

Specification:-

• Complete Arduino Kit with 100+ components.
• 12 x 12 x 7 mm tactile switch
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• SG90 Servo Motor
• UNO R3 AVR USB Development board
• Light Dependent Resistors sensor
• Resistor type: 1/4 watt carbon film resistor (220K, 330K)

Kit includes:-

1x Uno R3 Board | 1x USB Cable | 20x LEDs (Red, Yellow, Blue, Green) | 1x Potentiometer | 6x Push Button Switch | 2x Photoresistor | 20x Resistor | 1x RGB Led | 1x 7-Segment 1-Digit | 1x Breadboard 400 Point | 1x Buzzer | 1x Servo Motor | 1x Vibration Switch

Super Starter UNO R4 Minima Kit | DIY Electronics & Robotics Kit for Beginners to Advanced Users (105 Item)

Specification:-

• Compatible with UNO R4 Minima Board
• Fully supports Arduino IDE programming environment
• Includes a wide range of electronic components, sensors, and modules
• Plug-and-play breadboard for easy prototyping without soldering
• Durable and reusable components for multiple projects
• Suitable for beginners, hobbyists, and intermediate learners

Kit Included:
1x Compatible R4-Lite Minima Board | 1x Type-C Cable | 1x 830 Point Breadboard | 1x Servo Motor | 40x Male-to-Male & Male-to-Female Jumper Wires | 1x 0.96 inch OLED Display | 1x Photoresistor (LDR) | 1x DHT11 Temperature & Humidity Sensor | 1x Potentiometer 10K | 30x Resistor Pack – 220Ω, 1KΩ, 10KΩ | 1x Active Buzzer | 1x Passive Buzzer | 1x Ultrasonic Sensor (HC-SR04) | 6x Push Switch with caps | 1x RGB LED Module | 15x LEDs (Red, Green, Yellow) 1x Tilt Sensor | 1x IR Sensor | 1x Flame Sensor

Combo of BO Motor | Rubber Wheels | 4CH Transmitter & Battery Holder (11 Item)

Specification:-

• 4CH RC remote control
• Diameter of the wheel : 60mm
• BO gear motor compatible
• High-quality material build
• AA 4 cell battery holder
• AA 2 cell battery holder
• Transmitter operating voltage: 3.7-9V (HW Battery)
• Transmitter Range: 12-15 (approx)

Electronic Sensors Kit with DIY Projects Controller Board, RFID, Ultrasonic, IR, Smoke Components (95 Item)

Specifications:-

• 400 points Half size Solderless breadboard
• UNO R3 AVR USB Development board
• 6V - 12V DC Mini underwater pump
• Humidity Detection Moisture Sensor
• 16 x 2 Yellow/Green color LCD display
• RC522 RFID Card Reader Module
• Flammable gas and smoke detection sensor
• IR Proximity Sensor for Line Follower
  

Component List: 1 Pcs Controller Board, 1 Pcs Breadboard, 1 Pcs 4X4 16 Matrix Membrane Keypad, 1 Pcs USB cable, 1 Pcs Ultrasonic Sensor, 1 Pcs IR Proximity Module 1 Pcs DHT-11 Sensor, 1 Pcs MQ-2 smoke detection sensor module, 1 Pcs RC522 RFID Card Reader Module, 1 Pcs 16x2 LCD, 1 Pcs Soil Hygrometer Humidity, 1 Pcs mini water Pump, 5 pieces each of red, green, and white LEDs, 1 Pcs RGB LED, 10 Pcs Resistor (100K), 1 piece of 9V battery, 2 Pcs 100K ohm vertical preset variable resistors, 1 piece of 1-digit 7-segment Display 1 Pcs Buzzer, 2 Pcs push button switch (12x12x7), 4 Pcs NPN transistor (BC547), 2 Pcs rectifier diodes (1N4007 ), 1 Pcs light-dependent resistor (GL5528), 1 Pcs 9V battery connector, 40 Jumper wires (Male to Female, Male to Male)

DIY Science Experiment Starter Kit with DC Motor | Resistor (96 Item)

Specification:-

• High-performance battery
• Non-rechargeable
• Motor & Fan DIY Kit
• Mini Electric Motor 
• 9V battery 
• Hook up single-core wires.
• 1k Ohm Through-Hole Resistors
• AA 1.5V Nonrechargeable battery cell
• Multicolor 4 blade hard plastic build propeller 

Package Included: 2 Pcs 9V Battery, 6 Pcs DC Mini Motor, 5 Pcs Fan Blades, 4 Pcs Rocker Switches, 5 Pcs Green Led, 5 Pcs red Led, 25 Pcs 1K Resistors, 3 Pcs Colored Wire, 2 Pcs 9V Battery Clip Connector, 20 pcs Jumper wire male to mala, 1CS Buzzer, 1 pcs RC motor, 6 pcs 3v motor, 2 pcs battery holder, 2 pcs 7 LED strip aluminium Light Bulbs, 4 pcs AA 1.5V Non rechargeable 

Combo of DIY Starter Kit with 7-Segment Display & Resistor, LED's (110 Item)

Specifications:-

• Arduino UNO Board
• 16x2 LCD Display Module
• 7-Segment Display
• Breadboard 
• Relay Module
• Joystick Module
• 5v Piezoelectric Buzzer
• Servo Motor
• Male-to-Female jumper wire
• Blue Short USB Data Charging Cable
• Usage: Electronics Learning, DIY Projects & Circuit Experiments

Light dependent resistors sensor 12 mm (LDR) GL12528 pack of 2pcs

Specification:-

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  250V
5. Max. power  :  200W
6. Package includes : 5 pieces

100K ohm ( Ω ) vertical preset variable resistors ( 104 ) pack of 50pcs

Specifications

1. Type: preset variable resistor (trim pot)
2. Resistance value: 100K Ω
3. Max. operating voltage: 50V DC
4. Rotation: single turn
5. Resistance Tolerance: ±30%
6. Rotational cycles: 20 cycles

Electronic Spices 5000Pcs 4.7M Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 4.7M MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 4.7M ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 50Pcs 150k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 150k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 150K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 50Pcs 27k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 27k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 27K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 390 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 390 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 390 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 50Pcs 18k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 18k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 18K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 270k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 270k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 270K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

100K ohm ( Ω ) vertical preset variable resistor ( 104 ) pack of 5pcs

Specifications:-

1. Type : preset variable resistor (trimpot)
2. Resistance value: 100K Ω
3. Max. operating voltage : 50V DC
4. Rotation: single turn
5. Resistance Tolerance : ±30%
6. Rotational cycles: 20 cycles

10K ohm ( Ω ) vertical preset variable resistors ( 103 ) pack of 20pcs

Specifications

1. Type                                  : preset variable resistor (trimpot)
2. Resistance value             : 10K Ω
3. Max. operating voltage : 50V DC
4. Rotation                           : single turn
5. Resistance Tolerance    : ±30%
6. Rotational cycles            : 20 cycles

Electronic Spices 5000Pcs 220k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 220k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 220K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 50Pcs 1 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 1 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 1 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%.
4. Power rating: 1/4Watt.

Electronic Spices 5000Pcs 2.2 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 2.2 MR Ω ohm MF Through Hole Resistors Axial Lead

Electronic Spices 50Pcs 390k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 390k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 390K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 50Pcs 1M Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 1M MR Ω ohm MF Through Hole Resistors Axial Lead

Electronic Spices 5000Pcs 22 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 22MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 22 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 3.3M Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 3.3M MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 3.3M ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 470k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 470k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 470K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 100 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 100 MR Ω ohm MF Through Hole Resistors Axial Lead

Electronic Spices 50Pcs 150 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 150 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 150 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 50Pcs 10k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 10k MR Ω ohm MF Through Hole Resistors Axial Lead

Electronic Spices 5000Pcs 2.7k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 2.7k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 2.7K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 50Pcs 33k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 33k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 33K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 4.7k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 4.7k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 4.7K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 33 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 33 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 33 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 1M Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 1M MR Ω ohm MF Through Hole Resistors Axial Lead

Electronic Spices 50Pcs 2.7k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 2.7k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 2.7K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 330k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 330k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance: 330K ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%
• Power rating: 1/4Watt
• Maximum working voltage: 250V

Electronic Spices 50Pcs 4.7k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 4.7k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance: 4.7K ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%
• Power rating: 1/4Watt
• Maximum working voltage: 250V

Electronic Spices 5000Pcs 1 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 1 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

• Resistance: 1 ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%.
• Power rating: 1/4Watt.

Electronic Spices 50Pcs 220 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 220 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 220 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 50Pcs 330 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 330 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 330 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 4.7 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 4.7 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 4.7 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 50Pcs 47k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 47k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance: 47K ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%
• Power rating: 1/4Watt
• Maximum working voltage: 250V

Electronic Spices 5000Pcs 5.6 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 5.6 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 5.6 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 50Pcs 2.2k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 2.2k MR Ω ohm MF Through Hole Resistors Axial Lead

Electronic Spices 50Pcs 3.3k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 3.3k MR Ω ohm MF Through Hole Resistors Axial Lead