LilyPad 328 ATmega328P main board 16M compatible with Arduino

Specifications:-

1. Model type : Lilypad
2. Microcontroller chip : ATmega168 or ATmega328V
3. Operating voltage : 2.7V to 5.5V DC
4. Analog I/O Pins : 6
5. Digital I/O Pins : 14
6. PWM Digital I/O Pins : 6
7. Flash memory : 16KB

Arduino Wi-Fi D1 Mini ESP8266 Based Development Board

Specification:-

• Microcontroller: ESP8266
• Operating Voltage: 3.3V
• Digital I/O Pins: 11
• Connectivity: 802.11 b/g/n Wi-Fi
• Flash Memory: 4MB (4M Bytes)
• USB Interface: Micro-USB for power and programming

Pro mini 5V 16Mhz with ATMEGA328P microcontroller chip board

Specification:-

1. Microcontroller: ATMEGA238P
2. Input voltage : 5V to 12V DC
3. Clock frequency: 16Mhz
4. Supports auto-reset
5. Over-current protected
6. Analog input/output pins: 8
7. Digital input/output pins: 14

NANO R3 CH340 development board with ATmega328 microcontroller chip

Specification:-

1. Model name : NANO R3
2. Chip name : ATmega328
3. Operating voltage : 5V
4. Recommended operating voltage range : 5V to 12V
5. Digital input/output pins :  14 (of which 6 provide PWM output)
6. Analog input/output pins : 8
7. Flash memory : 32KB
8. Clock frequency : 16MHz

0.9 inch OLED Screen Display Module 4 pin compatible with Arduino

Specification

• Voltage: 3.3V-5V DC
• Size: 0.9 inch
• Power consumption: 0.04W 
• Number of pins: 4
• It has Super High Contrast
• Easy to install

Combo of UNO Robotics Kit Compatible with Arduino

Specification:-

• Male-to-male jumper wire
• USB Data Charging Cable
• 16 x 2 Yellow/Green color LCD display 
• UNO R3 AVR USB Development Board
• Membrane Keypad Switch-16 Key
• Waterproof Membrane Keypad

FSR402 Resistance Type Pressure Sensor Compatible with Arduino

Specification:-

• Type: Force sensing resistor
• Model: FSR FA402
• Thickness：≤0.3mm
• Dimension：17.47mm*18.3mm
• Sensing dimension：Φ14.68mm
• Force measuring range：100g ~ 10KG
• Force repeatable （part to part)：±20%
• Working temperature：-30℃~60℃

Combo of DIY Electronic Starter Kit Compatible with Arduino Projects

Specification:-

• 5mm LED round shape
• UNO R3 CH340G development board
• 400 points Half-size Solderless breadboard
• 40-pin male-to-male Jumper Wire
• 1k Ohm Through Hole Resistors Axial Lead

Kit includes:-

1 × USB cable, 1 × Development Board, 1 × 400-hole breadboard

5 × LED green, 5 × LED red, 40 × Male-to-male wires 20cm, 10 × Resistance 1K

Combo of DIY Learning Kit Compatible with Arduino for Educational Purpose (113 Item)

Specification:-

• USB Development Board 
• Sensor Modules
• 830 point Breadboard
• Blue color USB Cable
• Jumper Wire
• Electronic Resistors
• 5mm round LED
• 5V Piezoelectric Buzzer

Package Included:- 5 pcs each LED (White, Yellow, Blue, Green, Red), 1 pcs RGB LED, 2 pcs Photoresistor, 1 pcs Thermistor, 2 pcs Diode Rectifier (1N4007), 2 pcs Transistor (TIP31), 1 pcs Tilt Switch, 5 pcs push Button (small), 1 pcs each (IC L293D ,IC 74HC595 ), 1 pcs Active Buzzer, 1 pcs Passive Buzzer, 1 pcs Potentiometer, 1 pcs Joystick Module, 1 pcs 5V Relay, 1 pcs UNO Controller Board, 1 pcs 830 Point Breadboard, 1 pcs Power Supply Module, 1 pcs Ultrasonic Sensor, 1 pcs 3V Servo Motor, 1 pcs Fan Blade, 10 pcs Female to Female Jumper Wire, 10 pcs Male to Male Jumper Wire, 1 pcs USB Cable, 10 pcs Resistor (220K), 10 pcs Resistor (330K), 10 pcs Resistor (1K), 10 pcs Resistor (10K)

Combo of Advanced Starter Kit Compatible with Arduino Projects with Instruction (245 Item)

Specification:-

• Ultrasonic Module
• 830 point Breadboard
• 40 pin Jumper Wire
• 5V Piezoelectric Buzzer
• Blue color USB Cable
• SG90 Small digital servo motor
• 3 Color SMD RGB LED sensor module
• 3.3V-5v Joystick Sensor Module 

Package Included:- 1 Pcs LCD 1602 Module, 1 Pcs Breadboard Expansion Board, 1 Pcs matrix keyboard module, 1 Pcs 830 tie points Breadboard, 1 Pcs Ultrasonic Sensor, 1 Pcs Servo Motor, 2 Pcs potentiometer (10K), 1 Pcs DHT-11 (Temperature and Humidity Sensor), 1 Pcs 5V 1AMP Power supply Adapter, 1 Pcs Touch Sensor, 1 Pcs 5vlt Relay, 1 Pcs Power supply Module, 1 Pcs Joystick Module, 1 Pcs ULN2003 Stepper Motor Driver Board, 1 Pcs IC 74HC595, 1 Pcs 4 Digit 7 segment Display, 1 Pcs 7 segment display, 1 Pcs Stepper motor, 1 Pcs Active Buzzer, 1 Pcs Passive Buzzer, 5 Pcs Small button switch, 1 Pcs Tilt switch, 2 Pcs 2N2222 transistors, 1 Pcs IR receiver, 1 Pcs RGB LED, 2 Pcs Photoresistor, 1 Pcs Thermistor, 2 Pcs Diode Rectifier, 1 Pcs fan with motor, ,1 Pcs USB cable, 1 Pcs IR remote control, 1 Pcs Development Board, 40 pin jumper wire (Male to Male, Male to Female) 40 pcs each, LED (Green, Blue, Red, White, Yellow) 5 pcs each Resistor (10k, 1k, 220Ω, 100Ω, 100KΩ, 10R, 2KΩ, 5.1KΩ, 1MΩ, 330Ω) 10 pcs each 

Uno+WiFi R3 AtMega328p+NodeMCU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO

Specification:-

• USB-TTL converter
• Logic Level: 5V
• Operating Supply Voltage: 5V
• Digital I/O Pins: 14
• Analog I/O Pins: 6
• Operating temperature: −40С°/+125С°

Ultimate UNO R3 Professional Starter Kit | Compatible with Arduino IDE | DIY Electronics Kit (160 Item)

Specification:- 

• Complete Ultimate Arduino Professional Kit with 100+ components.
• Includes an Uno R3 and a large breadboard with a power supply.
• 12 x 12 x 7 mm tactile switches
• ESP8266 Wireless WiFi Transceiver
• L293D 4-Channel DC Motor Driver
• Resistor type: 1/4 watt carbon film resistor
• Modules: ESP8266 Wi-Fi, Bluetooth, RC522 RFID, and IR Remote.
• Sensors: PIR, DHT11, Ultrasonic, IR, Soil, Raindrop, Touch, etc.

Kit Included:

Smart Learning Robotics & IoT Kit | Beginner to Advanced STEM Project Kit | Compatible with Arduino IDE & Uno R3 (154 Item)

Specification:-

• Includes an Uno R3 and a 400 point breadboard
• 12 x 12 x 7 mm tactile switch with cap
• ESP8266 Wireless WiFi Transceiver
• DC toy Motor Driver with wire
• Resistor type: 1/4 watt carbon film resistor
• Sensors: DHT11, Ultrasonic, etc.
• Complete Arduino Kit with 100+ components.

Kit Included: 1 pcs Uno R3 Board | 1 pcs NodeMCU ESP8266 | 1 pcs Breadboard Small Size with 400 Points Solderless | 2 pcs Push Button with Caps | 1 pcs Potentiometer | 1 pcs ESP01 8266 | 1 pcs 7 Segment 1 Digit Cube Display | 1 pcs IC 74HC595 | 1 pcs Transistor PNP2222 | 15 pcs LEDs (Red, Blue, Green) | 1 pcs DHT11 with PCB (3 pin) | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs RGB LED with PCB | 1 pcs 1602 I2C LCD Display | 1 pcs Active Buzzer | 1 pcs Passive Buzzer  | 1 pcs Ultrasonic Sensor HC-SR04 | 1 pcs HC05 Bluetooth Module | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K assorted) | 20 pcs Jumper Wire (Male to Male) | 20 pcs Jumper Wire (Female to Female) | 20 pcs Jumper Wire (Female to Male) | 1 pcs Diode 1N4001 | 1 pcs 5V Relay Module | 2 pcs IR Line Sensor | 2 pcs Photoresistor | 1 pcs L293D Motor Driver Shield with soldered pins | 1 pcs Power Supply Box (6 Cell Holder) | 1 pcs Ultrasonic Sensor Holder | 1 pcs 2WD Car Chassis

Basic Project Starter Kit Compatible with Arduino IDE & Uno R3 | DIY Electronics Kit (127 Item)

Specification:-

• Includes an Uno R3 and 400 point breadboard
• 1602 LCD Display
• 12 x 12 x 7 mm tactile switches
• 5mm round dip LED (Red, Yellow, Blue
• 16 x 2 Blue/White color LCD display
• Blue Short USB Data Charging Cable
• 1/4W Resistor (220K, 330K, 1K, 22K, 15K) 10 Pcs Each Value of Resistor

Kit Included: 1 pcs Compatible Uno R3 Board | 1 pcs USB Cable | 1 pcs Breadboard Small Size with 400 Points (Solderless) | 3 pcs Push Button | 1 pcs Potentiometer 10K | 1 pcs 5V Relay Module | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs Passive Buzzer | 15 pcs LEDs (Assorted Colors – Red, Yellow, Blue) | 1 pcs DHT11 with PCB (4 pin) | 1 pcs Keypad 4×4 | 40 pcs Jumper Wire (Male to Male) | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K) | 1 pcs 1602 LCD Display | 1 pcs 40 Pin Header | 2 pcs NPN Transistor | 2 pcs Diode 1N4001 | 1 pcs RGB LED | 1 pcs Photoresistor | 1 pcs Shift Register

Level-2 Advanced Starter Kit Compatible with Arduino IDE & Uno R3 | RFID, Bluetooth & IoT Learning (114 Item)

Specification:-

• Complete Arduino Kit with 100+ components.
• Includes an Uno R3 and 830-point breadboard
• 12 x 12 x 7 mm tactile switch with cap
• Resistor type: 1/4 watt carbon film resistor
• SG90 Servo Motor
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• Resistor type: 1/4 watt carbon film resistor (220K, 330K, 1K)

Kit Included: 1 pcs Adruino Uno R3 | 1 pcs 830 Points Breadboard | 1 pcs USB Cable | 40 pcs Jumper Wires (Male to Male / Female to Male mix) | 1 pcs 1602 LCD Display | 1 pcs 7 Segment Display (1 Digit) | 1 pcs 4×4 Keypad | 1 pcs Stepper Motor | 1 pcs Stepper Motor Driver Module | 1 pcs Servo Motor (SG90) | 1 pcs Potentiometer (10K) | 1 pcs Active Buzzer | 1 pcs Passive Buzzer | 1 pcs IR Remote + IR Receiver | 1 pcs RTC (Real Time Clock) Module | 1 pcs RFID Module with Tag & Key | 1 pcs Joystick Module | 1 pcs Photoresistor (LDR Sensor) | 1 pcs Flame Sensor | 1 pcs Tilt Switch / Vibration Sensor (small module) | 1 pcs Sound Sensor Module | 1 pcs Water Sensor Module | 1 pcs DHT11 Temperature & Humidity Sensor | 1 pcs RGB LED Module | 1 pcs DC Motor Driver IC Module (L293D based) | 1 pcs 5V Relay Module | 1 pcs Battery Plug (9V Connector) | 30 pcs Resistor Pack (assorted values) | 15 pcs LEDs (Red, Green, Yellow)  | 5 pcs Push Button with Caps

Wireless IoT Starter Kit with NodeMCU ESP8266 | Compatible with Arduino IDE (237 Item)

Specification:-

• 1/4-watt Resistors
• 5V Piezoelectric Buzzer
• 830 points Half-size breadboard 
• 12 x 12 x 7 mm tactile switch
• USB Cable for Arduino Nano
• MB-102 Power Supply Module
• Wi Fi Networking Esp8266 Development Board

Package Included:- 1 pcs NodeMCU ESP8266 | 1 pcs Breadboard (Large) | 1 pcs Breadboard Power Supply Module | 5 pcs Push Button  | 1 pcs Potentiometer 10k | 1 pcs Photoresistor (LDR Sensor) | 1 pcs L293D Motor Driver IC | 3 pcs IC 74HC595 Shift Register | 4 pcs 2N2222 NPN Transistor | 25 pcs LEDs (White, Red, Blue, Yellow, Green)   | 1 pcs Fan (DIY Propeller) | 1 pcs DC Motor | 1 pcs 7 Segment Display (4 Digit) | 1 pcs Ultrasonic Sensor HC-SR04 | 1 pcs DHT11 Temperature & Humidity Sensor | 1 pcs SG90 Servo Motor | 1 pcs Passive Buzzer | 1 pcs Bar Graph LED Module | 1 pcs 5V Relay Module | 1 pcs RGB LED Module | 40 pcs Jumper Male-to-Male | 40 pcs Male-to-Female Jumper Wires | 1 pcs Bidirectional Logic Level Converter (Translator) | 2 pcs 1N4007 Diode | 1 pcs USB Cable | 1 pcs 9V Battery Holder with Connector | 100 pcs Resistor Pack (assorted values) (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

Super Mega 2560 Starter Kit | Complete Beginner’s Learning Kit Compatible with Arduino IDE (136 Item)

Specification:-

• MEGA2560 MCU REV3 development board
• 5mm round shape LED 
• SG90 Servo Motor
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• 12x12x7.3 mm Push Button Switch with Cap 
•  Yellow/Green LCD display module

Kit Included: 1 pcs Aadruino Mega 2560 Board | 1 pcs Mega 2560 Shield | 1 pcs Remote (IR Remote Control) | 1 pcs 1602 LCD Display | 1 pcs 830 Points Breadboard | 1 pcs 40 Pin Header | 1 pcs Potentiometer | 30 pcs LED (Red, Green, Blue) | 1 pcs USB Cable | 20 pcs Jumper Wires (Male to Male) | 20 pcs Jumper Wires (Female to Male) | 1 pcs 9V Battery Supply Connector | 4 pcs Push Button with Caps (Colored) | 1 pcs Stepper Motor with Driver | 1 pcs Mini Breadboard | 1 pcs Servo Motor (SG90 9G) | 1 pcs Active Buzzer | 1 pcs Passive Buzzer | 1 pcs 4-Digit 7 Segment Display | 1 pcs 1-Digit 7 Segment Display | 1 pcs IC 74HC595 | 1 pcs Flame Sensor | 1 pcs Photoresistor (LDR Sensor) | 1 pcs NPN Transistor | 1 pcs IR Receiver Module | 1 pcs Vibration Sensor / Tilt Sensor | 40 pcs Resistors – (1K, 10K, 220Ω, 330Ω)

Proto Shield Kit Compatible for Arduino Mega R3

Specification:

• Compatibility: Arduino Mega R3
• Shield Type: Prototyping Shield with mini breadboard
• Mini Breadboard: Detachable, reusable
• Prototyping Area: Large solderable area with pads
• Onboard Components: Reset switch, power LED
• Connectivity: Breakouts for all Mega R3 pins

3-in-1 Robotics Starter Kit | Multipurpose DIY Robot Kit | Compatible with Arduino Uno R3 (181 Item)

Specification:

• Includes an Uno R3 and a 400 point breadboard
• 12 x 12 x 7.3 mm tactile switch with cap
• ESP8266 Wireless Wi Fi Transceiver
• DC toy Motor Driver with wire
• 1 Digit 7 Segment LED Display
• Jumper Wire Cable 26AWG (21cm)
• Resistor type: 1/4 watt carbon film resistor
• Sensors: DHT11, Ultrasonic, etc.
• Complete Arduino Kit with 100+ components.

Kit Included: 1x Uno R3 Board | 1x Breadboard (400 points) | 1x 7 Segment Display (1 Digit) | 2x Push Buttons (with caps) | 1x Potentiometer | 1x DC Motor | 1x SG90 Servo Motor | 1x RGB LED Module | 2x Transistor PN2222 | 15x LEDs (Red, Green, Blue) | 1x Active Buzzer | 1x Passive Buzzer | 1x HC-SR04 Ultrasonic Sensor | 10x Resistors 220Ω | 10x Resistors 1kΩ | 40x Female-to-Female (F-F) Jumper Wires | 40x Male-to-Female (M-F) Jumper Wires | 40x Male-to-Male (M-M) Jumper Wires | 2x Diode 1N4001 | 1x Relay Module | 2x Line Sensor  | 2x Photoresistor Sensor  | 1x L293D Motor Driver Shield | 1x Battery Power Supply (with holder) | 1x Ultrasonic Sensor Holder | 1x 2WD Car Chassis

Nano Starter Kit | Compatible with Arduino IDE | Beginner DIY Electronics Kit (236 Item)

Specification:-

• Nano R3 development board
• 830-Point Solderless Breadboard
• HC-SR04 Ultrasonic Module
• 5mm LEDs: Assorted Color LEDs
• Switches & Controls: Push Buttons, Potentiometer
• Displays: 7-Segment Display, LED Bar Graph
• Transistors & Diodes: 2N2222 NPN Transistor, 1N4007 Diode
• Motor Driver & ICs: L293D Motor Driver, 74HC595 Shift Register

Kit Included:

1x Nano Microcontroller | 1x 830 Point Breadboard | 1x HC SRO4 | 5x Push Button | 1x Potentiometer | 2x 144007 Diode | 1x Photoresistor | 1x L2930 Motor Driver | 1x IC 74HC595 | 4x 2N2222 NPN Transistor | 25x LEDS | 1x USB Cable | 1x Fan  | 1x DC Motor | 1x 7 Segment 4 Digit | 1x Bar Graph | 1x Relay | 1x IR Receiver | 1x Passive Buzzer | 1x RGB | 1x Thermistor | 40x Jumper Pins Male to Male  | 40x Male to Female Wires | 1x IR Remote | 100x 1/4-watt Resistors (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

Beginner's Kit for Uno R3 | DIY Electronics & STEM Starter Kit | Compatible with Arduino IDE (57 Item)

Specification:-

• Complete Arduino Kit with 100+ components.
• 12 x 12 x 7 mm tactile switch
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• SG90 Servo Motor
• UNO R3 AVR USB Development board
• Light Dependent Resistors sensor
• Resistor type: 1/4 watt carbon film resistor (220K, 330K)

Kit includes:-

1x Uno R3 Board | 1x USB Cable | 20x LEDs (Red, Yellow, Blue, Green) | 1x Potentiometer | 6x Push Button Switch | 2x Photoresistor | 20x Resistor | 1x RGB Led | 1x 7-Segment 1-Digit | 1x Breadboard 400 Point | 1x Buzzer | 1x Servo Motor | 1x Vibration Switch

46-in-1 DIY Sensor Kit (37-in-1 + Extra Modules) | Compatible with Arduino IDE & Raspberry Pi

Specification:-

• Modules Included: 46 modules (37-in-1 sensor kit + 9 additional modules)
• Durability: High-quality, reusable modules designed for long-term experimentation
• Hall effect detection sensor (easily available)
• Joystick sensor Input voltage range: 3.3V to 5V
• Suitable for Arduino, AVR, and PIC microcontroller projects
• The sensor module kit is perfect for various DIY projects and robotics science projects
• Programming Support: Fully supports Arduino IDE, Python, and Scratch-based coding platforms

Package includes:
1x Real time clock | 1x Joystick | 1x 5v relay | 1x Big sound | 1x Small sound | 1x Tracking | 1x Avoidance | 1x Water sensor | 1x Flame sensor | 1x Linear hall | 1x Touch sensor | 1x Digital temperature | 1x Active buzzer | 1x Passive buzzer | 1x  rgb | 1x Ultrasonic sensor | 1x Two color led | 1x Mini two color led | 1x Reed | 1x Mini reed | 1x Mpu 6050 | 1x Heartbeat | 1x 7 Color led | 1x Mp1584en | 1x Push button | 1x Shock sensor | 1x Rotatory encoder | 1x Light cup | 1xTilt switch | 1x Ball switch | 1x Photo resistor | 1x Gas sensor | 1x Analog hall | 1x Magnetic hall | 1x Temp 18b20 | 1x Analog temp | 1x IR Receiver | 1x Light blocking | 1x Sd card reader | 1x IR emitter | 1x Temp and humidity | 1x Laser emitter | 1x Smd rgb | 1x Soil moisture sensor | 1x Tap module | 1x Breadboard power supply.

DIY Self-Balancing Robot Car Kit | Uno R3 + L298N Motor Driver + MPU6050 | Compatible with Arduino IDE

Specification:-

• Main Controller: Uno R3 Board
• Motor Driver: L298N Dual H-Bridge
• Sensor: MPU6050 Gyroscope + Accelerometer
• Power Supply: Battery-powered (holder included)
• Compatibility: Arduino IDE / DIY Robotics Projects

DIY Line Follower Robot Kit | Arduino IDE Compatible | 3-Array IR Sensor | Robotics STEM Learning Kit for Students

Specification:

• Controller: Arduino Uno R3 compatible board
• Sensor: 3-Array IR Line Tracking Module
• Motor Driver: L298N or equivalent
• Motors: DC Gear Motors with wheels
• Chassis: DIY car frame with caster wheel
• Power: Battery holder included
• Programming: Arduino IDE

PZIN51000051 Imported V10 Nodemcu Lua Wi Fi Networking Esp8266 Development Board

Specifications:-

1. Chipset: ESP8266
2. Language Support: Lua scripting
3. Connectivity: Wi-Fi
4. Compatibility: Various sensors and peripherals

ESP8266 5V 1 Channel relay module IOT smart home remote control switch

Specifications:-

1. Transmission Distance (m) : 40m
2. Trigger voltage: 5V DC
3. Switching voltage: 250V @ 10A
4. Switching voltage: 30V @ 10A
5. Relay voltage : 5V (10A/250V AC, 10A/30V DC)
6. Baud rate: 9600

ESP8266MOD NodeMCU V3 WiFi Networking Development Board CH340G

Specification

1. Flash Memory         4Mb
2. Voltage                    3.3V.
3. Power input            4.5V ~ 9V (10VMAX)
4. Temperature           -40℃ ~ + 125 ℃
5. instruction RAM     32KB
6. user data RAM       80KB

ESP8266 Wireless WiFi Transceiver Module

Specification:-

• 1MB Flash Memory
• Wi-Fi Direct (P2P), soft-AP
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW
• Integrated low power 32-bit CPU could be used as an application processor

DIY Combo Kit ESP8266MOD with Breadboard | Jumper Wires | BMP180 Sensor | OLED Display | USB Cable (85 Items)

Specification:-

• Tie points: 400
• ESP8266MOD NodeMCU Development Board
• BMP180 Atmospheric pressure sensor module
• 0.9-inch OLED Screen Display Module
• Male-to-Male 40-Pin Jumper wire
• Male-to-Female 40-Pin Jumper wire

Component List: 1 Pcs B-Type USB Cable, 1 Pcs ESP8266MOD Development Board, 1 Pcs BMP180 - Digital barometer, 1 Pcs OLED Screen Display Module 4-pin, 1 Pcs 400 points Half-size solderless breadboard, 40 Pcs Male-to-Female Jumper wire, 40 Pcs Male to Male Jumper wire

Combo of 2.1 Channel 100W Amplifier Board | Bluetooth FM | Remote Control

Specification:-

1. 100% best and high quality product
2. IC name  :  7805
3. Three TDA2030 transistors
4. On board 5V voltage regulator
5. Power rating  :  100 watt
6. It is use in 2.1 home theater
7. Can drive 2 normal size speakers and a subwoofer easily.
8. Bluetooth supports FM/MP3/USB/TF/AUX/FM/BLUETOOTH
9. Enhance remote for best operating ranges

Combo of 4.1 Channel 150W Amplifier Kit with High-Low Pass Filter | Bluetooth FM | Remote Control

Specifications:

• TDA2030-Based 150W Amplifier Board
• Input voltage 12-0 -12,
• Current 1.5 to 3 amp. Power - 125 watts.
• Bluetooth Module Support MP3/USB/TF/AUX/FM/BLUETOOTH
• Good Bass Circuit, Can Be Used in Both 4.1 

Combo of 100 watt 4440 IC based audio amplifier board with bluetooth module and remote

Specification:-

1. 100% Best quality tested product
2. Enjoy best quality sound
3. 4440 is a two channel audio power amplifier board
4. Working voltage  :   12V DC
5. Parts can be easily replace.
6. High Power up to 100 Watt output
7. Power rating  :  3amp
8. Bluetooth module with remote
9. Also 3 potentiometer of 2 x 47K and 1 x 100K

KY032 - TSOP based Infrared obstacle avoidance proximity sensor module

Specifications:-

1. Distance detection: 2cm to 30cm
2. Working voltage: 3.3V to 5V
3. Low Power High immunity against ambient light.
4. TTL and CMOS compatibility.
5. Output active low.

TDA7265 based high power 100watt Audio amplifier circuit board

Specification:-

1. 100% branded and high-quality audio board
2. It comes with 25V capacitors
3. The IC is enough powerful to drive heavy woofers
4. The output current is also high, giving pleasant sound quality
5. It works with 100-watt power
6. Input Voltage: 12V

TDA7294 based 200 watt heavy duty audio amplifier circuit board

Specification:-

1. 100% branded and high-quality audio board
2. Comes with 4700uf capacitors
3. The IC is enough powerful to drive heavy woofers
4. The output current is also high that giving pleasant sound quality
5. It works with 200-watt power

TDA7297 based heavy duty 400watt Audio amplifier circuit board

Specification:-

1. 100% branded and high-quality audio board
2. Comes with 3300uf capacitors
3. The IC is enough powerful to drive heavy woofers
4. The output current is also high that giving pleasant sound quality
5. It works with a 400-watt power

PIC16F886 Enhanced flash based 8 Bit Microcontrollers with Nano watt technology DIP 28 pin IC

Specification

1. Program memory type: flash
2. Program memory size: 14KB
3. RAM size : 368bytes
4. Supply voltage : 2.2V to 5.5V
5. Power dissipation : 800mW
6. Communication interface : Serial

Thermal paste compound syringe or injection for heat sink carbon-based 0.5g pack of 5pcs

Specification

1. 100% pure carbon compound paste
2. Color : silver
3. Thermal conductivity : >1.93W/m-k
4. Thermal resistance : <0.120°C-in²/W
5. 20% metal oxide compounds
6. Weight 0f the compound : 0.5g

Thermal paste compound syringe or injection for heat sinks carbon-based 0.5g pack of 20pcs

Specification:-

1. 100% pure carbon compound paste
2. Color: Silver
3. Thermal conductivity : >1.93W/m-k
4. Thermal resistance: <0.120°C-in²/W
5. 20% metal oxide compounds
6. Weight 0f the compound: 0.5g

TDA7294 based 200 watt High quality heavy duty audio amplifier circuit board

Specification:-

1. 100% branded and high-quality audio board
2. New and improved design for better performance
3. The two ICs is enough powerful to drive heavy woofers
4. The output current is also high that giving pleasant sound quality
5. It works with 200-watt power

12V LCD-129 850VA PIC16F73 Based Power Home Inverter UPS KIT With LCD Display Square (16X2) And Connector

Specification

1. Model no                         GKE-129 (850VA/12V) 
2. Microcontroller                PIC16F73
3. Input voltage                    DC 12V
4. Output voltage AC            230 V AC
5. Display                             LCD
6. Charging current              Hi-12A Lo-10A
7. Dimension of kit              19.5cmx12cm

50ml Soldering and Desoldering Rosin Based Liquid Flux

Specification : 

• Prevents oxidation 
• Eliminates impurities 
• Gives shine 
• Strong solder bonding
• Excellent wetting 
• Non-corrosive 
• Safe to use of any electronic components 

50ml Rosin Based Liquid Flux & 50ml ISO-Propyl Alcohol Soldering Cleaning

Specification

• Prevents oxidation 
• Eliminates impurities 
• Gives shine 
• Strong solder bonding
• Easy Application
• High-Quality Formulation

AS-10 220V 10A Automatic On Off Light Based photocell Sensor Switch for lighting

Specification:-

• Model : AS-10
• Input Voltage :DC/AC 12V 24V 220V Optional
• Max Load Current : 10A
• Frequency : 50-60HZ
• Easy to install

MOSFET Based 200-watt Stereo Amplifier Circuit Board

Specification:-

• Transistor Type: MOSFET
• Power Source: AC
• Power Output: 200 watts per channel
• Operated at 24-0-24V Ac to 30-0-30V AC with 5 to 7 Amp of current
• Output Sound: 100+100 Watt two Channel Stereo Sound out put.

5V 1 channel relay module compatible with 5V microcontroller

Specification:-

1. Number of channels: 1
2. Supply voltage: 3.75V to 6V
3. Quiescent current: 2mA
4. Trigger voltage: 5V
5. Trigger current: 20mA
6. Current when the relay is active: 70mA
7. Relay maximum contact voltage: 250V AC or 30V DC
8. Relay maximum current:  10A

95mm x 40mm Hard plastic build rubber cover black color 6mm rod compatible heavy duty trolley wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 25Kg of weight
3. Diameter of the wheel : 95mm
4. Width of the wheel : 40mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

80mm x 25mm Hard plastic build rubber cover orange color 6mm rod compatible robot wheel pack of 4pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 20Kg of weight
3. Diameter of the wheel : 80mm
4. Width of the wheel : 25mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

60mm x 25mm Hard plastic build rubber cover yellow color BO motor compatible RC toy car wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 60mm
4. Width : 25mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

60mm x 25mm Hard plastic build rubber cover yellow color BO motor compatible RC toy car wheel pack of 4pcs

Specification:-

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 60mm
4. Width : 25mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

80mm x 25mm Hard plastic build rubber cover orange color 6mm rod compatible robot wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 20Kg of weight
3. Diameter of the wheel : 80mm
4. Width of the wheel : 25mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

70mm x 15mm Hard plastic build rubber cover red color 6mm rod compatible toy truck wheel pack of 4pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width of the wheel : 15mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

70mm x 15mm Hard plastic build rubber cover red color 6mm rod compatible toy truck wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width of the wheel : 15mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

95mm x 40mm Hard plastic build rubber cover black color 6mm rod compatible heavy duty trolley wheel pack of 4pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 25Kg of weight
3. Diameter of the wheel : 95mm
4. Width of the wheel : 40mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

70mm x 13mm Hard plastic build rubber cover red color BO motor compatible toy truck wheel pack of 1pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width of the wheel : 13mm
5. BO motor compatible
6. High-quality material build
7. High ground grip for better performance

75mm x 8mm Hard plastic build rubber cover yellow color BO motor compatible DIY project wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 75mm
4. Width of the wheel : 8mm
5. High-quality material build
6. High ground grip for better performance

75mm x 8mm Hard plastic build rubber cover red color BO motor compatible DIY project wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 75mm
4. Width of the wheel : 8mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

70mm x 15mm Hard plastic build rubber cover red color 6mm rod compatible toy truck wheel pack of 1pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width of the wheel : 15mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

80mm x 25mm Hard plastic build rubber cover orange color 6mm rod compatible robot wheel pack of 1pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 20Kg of weight
3. Diameter of the wheel : 80mm
4. Width of the wheel : 25mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

55mm x 20mm Hard plastic build rubber cover white color 6mm rod compatible disc robot wheel pack of 1pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 55mm
4. Width : 20mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

65mm x 17mm Hard plastic build rubber cover white color 6mm rod compatible DIY project wheel pack of 1pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 65mm
4. Width : 17mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

70mm x 40mm Hard plastic build rubber cover white color 6mm rod compatible robot wheel pack of 1pcs

Specification

1. 100% high-quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width : 40mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

105mm x 20mm Hard plastic build rubber cover white color 6mm rod compatible kids go kart wheel pack of 1pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 105mm
4. Width of the wheel : 20mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

110mm x 40mm Hard plastic build rubber cover white color 6mm rod compatible robotic car wheel pack of 1pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 110mm
4. Width : 40mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

95mm x 40mm Hard plastic build rubber cover black color 6mm rod compatible heavy duty trolley wheel pack of 1pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 25Kg of weight
3. Diameter of the wheel : 95mm
4. Width of the wheel : 40mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

70mm x 17mm Hard plastic build rubber cover yellow color BO motor compatible disc DIY project wheel pack of 1pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width : 17mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

60mm x 25mm Hard plastic build rubber cover yellow color BO motor compatible RC toy car wheel pack of 1pcs

Specification

1. 100% high-quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 60mm
4. Width : 25mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

75mm x 8mm Hard plastic build rubber cover green color BO motor compatible DIY project wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 75mm
4. Width of the wheel : 8mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

45mm x 11mm Hard plastic build rubber cover yellow color BO motor compatible toy car wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 45mm
4. Width : 11mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

60mm x 6mm Hard plastic build rubber cover green color BO motor compatible toy wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 60mm
4. Width of the wheel : 6mm
5. BO motor compatible
6. High-quality material build
7. High ground grip for better performance

65mm x 17mm Hard plastic build rubber cover white color 6mm rod compatible DIY project wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 65mm
4. Width : 17mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

110mm x 40mm Hard plastic build rubber cover white color 6mm rod compatible robotic car wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 110mm
4. Width : 40mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

110mm x 40mm Hard plastic build rubber cover white color 6mm rod compatible robotic car wheel pack of 4pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 110mm
4. Width : 40mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

70mm x 13mm Hard plastic build rubber cover red color BO motor compatible toy truck wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width of the wheel : 13mm
5. BO motor compatible
6. High-quality material build
7. High ground grip for better performance

70mm x 13mm Hard plastic build rubber cover red color BO motor compatible toy truck wheel pack of 4pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width of the wheel : 13mm
5. BO motor compatible
6. High-quality material build
7. High ground grip for better performance

55mm x 20mm Hard plastic build rubber cover white color 6mm rod compatible disc robot wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 55mm
4. Width : 20mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

55mm x 20mm Hard plastic build rubber cover white color 6mm rod compatible disc robot wheel pack of 4pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 55mm
4. Width : 20mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

70mm x 17mm Hard plastic build rubber cover yellow color BO motor compatible disc DIY project wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width : 17mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

70mm x 17mm Hard plastic build rubber cover yellow color BO motor compatible disc DIY project wheel pack of 4pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width : 17mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

75mm x 8mm Hard plastic build rubber cover green color BO motor compatible DIY project wheel pack of 4pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 75mm
4. Width of the wheel : 8mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

75mm x 8mm Hard plastic build rubber cover green color BO motor compatible DIY project wheels pack of 10pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 75mm
4. Width of the wheel : 8mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

75mm x 8mm Hard plastic build rubber cover red color BO motor compatible DIY project wheel pack of 4pcs

Specification

1. 100% high-quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 75mm
4. Width of the wheel : 8mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

75mm x 8mm Hard plastic build rubber cover red color BO motor compatible DIY project wheels pack of 10pcs

Specification

1. 100% high-quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 75mm
4. Width of the wheel : 8mm
5. BO gear motor compatible
6. High-quality material build
7. High ground grip for better performance

105mm x 20mm Hard plastic build rubber cover white color 6mm rod compatible kids go kart wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 105mm
4. Width of the wheel : 20mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

105mm x 20mm Hard plastic build rubber cover white color 6mm rod compatible kids go kart wheel pack of 4pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 105mm
4. Width of the wheel : 20mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

65mm x 17mm Hard plastic build rubber cover white color 6mm rod compatible DIY project wheel pack of 4pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 65mm
4. Width : 17mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

70mm x 40mm Hard plastic build rubber cover white color 6mm rod compatible robot wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 15Kg of weight
3. Diameter of the wheel : 70mm
4. Width : 40mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

70mm x 40mm Hard plastic build rubber cover white color 6mm rod compatible robot wheel pack of 4pcs

Specification:

• 100% high-quality branded toy wheels
• Tested up to 15Kg of weight
• Diameter of the wheel: 70mm
• Width: 40mm
• Compatible with 6mm rod
• High-quality material build
• High-ground grip for better performance