MP3 Decoder Board Audio Wireless Bluetooth Module Module Support USB Disk / SD / Bluetooth / FM / LIN Modes (110BT V2.0)

Specification

1. Working voltage:  5V
2. Support:  mp3/Bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Remote for easy handling
5. Can connect speakers directly
6. included JST wire

Bluetooth FM/ USB/ AUX/ TF Card mp3 Module with Remote for Amplifier (90 x 36)mm

Specification

1. Operating voltage: 5V
2. Multiple input options: Bluetooth, FM, USB, AUX, TF Card.
3. Supports MP3 playback for versatile audio sources.
4. Compact dimensions of (90 x 36)mm for easy integration.
5. Includes a remote control for convenient operation with amplifier setups.

Decoder Board Audio Wireless Bluetooth Module Diy Stereo board with support in bluetooth FM,USB,SD-CARD Slot , AUX & TF

Specification

• Connector Type : Bluetooth
• Audio Output Type : Speakers
• Power source : DC
• Material : Plastic
• Dimension : 97 x 16 mm

5V Dual Digital Bluetooth Speaker Module Audio Amplifier

Specifications:-

• Input Voltage: 5Volts
• Output: Audio  Headphone 
• High quality material
• Simple and easy
• Provide good sound quality

KCX BT002 bluetooth 4.2 Wireless stereo audio receiver circuit modules pack of 50pcs

Specification

1. Working voltage:  Dc 3.3V to 5.0 V
2. Provide good sound quality
3. Easy to set up with other amplifiers
4. Very low power consumption
5. Very small size

KCX BT002 bluetooth 4.2 Wireless stereo audio receiver circuit modules pack of 10pcs

Specification

1. Working voltage:  Dc 3.3V to 5.0 V
2. Provide good sound quality
3. Easy to set up with other amplifiers
4. Very low power consumption
5. Very small size and lightweight

Combo of 2.1 Channel 100W Amplifier Board | Bluetooth FM | Remote Control

Specification:-

1. 100% best and high quality product
2. IC name  :  7805
3. Three TDA2030 transistors
4. On board 5V voltage regulator
5. Power rating  :  100 watt
6. It is use in 2.1 home theater
7. Can drive 2 normal size speakers and a subwoofer easily.
8. Bluetooth supports FM/MP3/USB/TF/AUX/FM/BLUETOOTH
9. Enhance remote for best operating ranges

Combo of 250W 2N3055 audio amplifier board with bluetooth module and remote

Specification

1. 100% Best quality tested product
2. 2N3055 transistors for high loads
3. Enjoy best quality sound
4. Upgraded audio amplifier board
5. Two speaker output
6. Input supply range  :  18-0-18 volt to  24-0-24 volt
7. Bluetooth module with digital display and remote

Combo of 100 watt 4440 IC based audio amplifier board with bluetooth module and remote

Specification:-

1. 100% Best quality tested product
2. Enjoy best quality sound
3. 4440 is a two channel audio power amplifier board
4. Working voltage  :   12V DC
5. Parts can be easily replace.
6. High Power up to 100 Watt output
7. Power rating  :  3amp
8. Bluetooth module with remote
9. Also 3 potentiometer of 2 x 47K and 1 x 100K

KCX BT002 bluetooth 4.2 Wireless stereo audio receiver circuit module pack of 1pcs

Specification:-

1. Working voltage  :  Dc 3.3V to 5.0 V
2. Provide good sound quality
3. Easy to set up with other amplifiers
4. Very low power consumption
5. Very small size

Combo of TG113 Bluetooth Circuit Board with 2-Inch 4Ω 5W Metal Woofer Speaker

Specification:-

1. High quality sound production
2. Easy to handle
3. Low price
4. Combo pack
5. Operating voltage : 3.7V-5V DC
6. New and improve microchip technology
7. Support  :  mp3/bluetooth/USB/aux/FM

Combo of 15W+15W Dual Channel Audio Amplifier with Bluetooth 4.2 Module

Specification:-

1. PAM8610
   1. Operating voltage  :  7V to 15V (12V is suitable)
   2. Power rating  :  15W + 15W
   3. Working Mode  :  Class – D
   4. Chip name  :  PAM8610
   5. Mute switch functionality
   6. Low noise power amplifier

2. KCX BT002

   1. Working voltage  :  Dc 3.3V to 5.0 V
   2. Provide good sound quality
   3. Easy to setup with other amplifier
   4. Very low power consumption
   5. Very small size

Combo of 3W+3W Audio Amplifier with Bluetooth MP3 USB FM Decoder & Remote

Specification

1. PAM8403
   1. 2 channels 3 W PAM8403 audio amplifier
   2. Output Power  :  3W + 3W
   3. Working Voltage  :  2.5 to 5.5V
   4. Board Size  :  22 x 18 mm
   5. High amplification efficiency
2. Bluetooth module
   1. Working voltage  :  5V
   2. Support  :  mp3/bluetooth/USB/aux/FM/memory card
   3. Excellent sound quality
   4. Can connect speakers directly
   5. Cheap and easy to install
   6. Remote for easy handling

82D05 5V Stereo dual channel audio bluetooth 2.0 module

Specifications:-

1. Operating voltage : 5V
2. Dual channel stereo
3. Current : 300mA
4. Power rating : 3W
5. Small size

Combo of PAM8403 Amplifier Board with Bluetooth Audio Receiver & Micro USB Battery Charger Module

Specifications:-

1. Working voltage :  DC 3.3V to 5V
2. Charging cut-off voltage  :  4.2V
3. Maximum charging current  :  1000mA
4. Provide good sound quality
5. Easy to set up with other amplifiers
6. Very low power consumption

Bluetooth FM with MIC Slot Big Display USB IR Antenna Slot MP3 Stereo Audio Player Decoder Module Kit with Big Remote

Specification:-

1. Working voltage  :  5V
2. Support  :  mp3/bluetooth/USB/FM/memory card/Mic slot/IR antenna slot/Big digital display/Big remote controller
3. Excellent sound quality
4. Can connect speakers directly
5. Cheap and easy to install
6. Remote for easy handling

5V wireless HI-FI USB/ FM / 5 watt + 5 watt Audio Amplifier Bluetooth Player Module MP3 with in- Built mic

Specification

1. Support:  mp3/Bluetooth/USB/aux/FM/memory card
2. Excellent sound quality
3. Remote for easy handling
4. Can connect speakers directly
5. MODE: Switching of USB/TF/FM/LINE IN/BLUE TOOTH
6. USB: Connect the USB flash drive 
7. In Build Amplifier Module
8. Working voltage    5V
9. output current: 5 watt

Bluetooth FM USB AUX Card MP3 Stereo Audio Player Decoder Module with Remote for Amplifier

Specification

1. Connector Type             Bluetooth
2. Control Method            Remote
3. Audio Output Type      Speakers
4. Material                        Plastic
5. JST wire

5V Bluetooth FM/ USB/ AUX/Mic/ Card MP3 Stereo Audio Player Decoder Module with Remote for Amplifier & IC

Specification

1. working voltage: 5V
2. Connector Type: Bluetooth
3. Control Method: Remote
4. Audio Output Type: Speakers
5. Material :Plastic
6. Power source: DC

Bluetooth Module with Remote for Amplifier and AUX, USB, TF Card (70 x 45)mm

Specification

1. Connector Type          Bluetooth
2. Control Method          Remote
3. Audio Output Type     Speakers
4. Dimension                  70 x 45 mm
5. Power source             DC
6. Material                      Plastic

Decoder Board Audio Wireless Bluetooth Module Diy Stereo board with support in bluetooth FM,USB,SD-CARD Slot , AUX & TF with Remote for Amplifier (97 x 16)

Specification

1. Connector Type         Bluetooth
2. Control Method        Remote
3. Audio Output Type    Speakers
4. Dimension                  97 x 16 mm
5. Power source             DC
6. Material                      Plastic

Decoder Board Audio Wireless Bluetooth Module for amplifier Bluetooth USB/ AUX/ TF card (70x45)mm

Specification

1. Connector Type          Bluetooth
2. Control Method          Remote
3. Audio Output Type     Speakers
4. Dimension                  70 x 45 mm
5. Material                      Plastic
6. voltage rating             5 V

Wireless HI-FI circuit modules with in-Built bluetooth and 5 watt amplifier for direct speaker (75 x 20) mm

Specification:-

• Connector Type: Bluetooth
• Audio Output Type : Speakers
• Dimension : 75 x 20 mm
• Material: Plastic
• Working voltage: 5V
• Output Current: 5 watt
• Single Speaker operator

5V Bluetooth FM/ USB/ AUX/ Card MP3 Stereo Audio Player Decoder Module with Remote for Amplifier

Specification

1. working voltage        5V
2. Connector Type         Bluetooth
3. Control Method         Remote
4. Audio Output Type    Speakers
5. Material                      Plastic

Stereo Bluetooth Speaker Circuit Module Board Kit for DIY Mini FM/ USB/ AUX /TF Card/ MP3 Audio Player Decoder Module Kit with Speaker, Li-lon Battery

Specification

• You Can connect speakers directlys
• Complete DIY Kit for Making Bluetooth Speaker
• Easy to use Bluetooth Speaker Circuit Board
• Best quality and Branded Products
• Better speaker sound 

5V Bluetooth MP3 Decoding Board Module with inbuilt SD Card Slot / USB / FM and 5+5 Watt Amplifier for Direct Speaker

Specification:-

• Output: Double channel Digital Audio Output
• Input :- USB/SD Card Slot/Bluetooth/FM
• DIY speakers and modified audio/car rare weapon
• Support MP3/WMA/WAV/ format music.
• Power Source: USB & Battery.

Digital Audio Player Bluetooth MP3 Decoding Board Module with inbuilt USB/FM/Mic/Ir/Tf

Specification

• Connector Type: Bluetooth
• Special Feature: FM Radio
• Connectivity Technology: Bluetooth, USB
• Color: Multi
• Compatible Devices: Laptop Personal Computer
• Audio Output Type: Speakers

Bluetooth FM USB AUX Card MP3 Stereo Audio Player Decoder Module(105 x 25)

Specification

• Connector Type            Bluetooth
• Color                            Black
• Audio Output Type      Speakers
• Material                        Plastic
• Compatible Devices     All audio input

Bluetooth FM USB AUX Card MP3 Stereo Audio Player Decoder Module with wire and without frame (75 x 20)

Specification

• Connector Type             Bluetooth
• Color                            Black
• Audio Output Type      Speakers
• Material                        Plastic
• JST wire

TDA3116 50w+50w Dual Channel DC 12V Audio Amplifier Board Pack of 1

Specification:-

• Amplifier Chip: TDA3116
• Output Power: 50W + 50W (dual-channel stereo)
• Operating Voltage: DC 12V
• Input Impedance: 20 kΩ (unbalanced)
• Signal-to-Noise Ratio (SNR): >100 dB
• Frequency Response: 20 Hz - 20 kHz
• Dimensions: Compact form factor for easy integration

5V Wireless HI-FI USB/ FM / 5 watt + 5 watt Audio Amplifier Bluetooth Circuit Module with Display

Specification:-

• Working voltage: 5V
• Support:  mp3/Bluetooth/USB/aux/FM/memory card
• Excellent sound quality
• Remote for easy handling
• Can connect speakers directly
• USB: Connect the USB flash drive 

CT14 Bluetooth 4.2 F Class 5W+5W Stereo Audio Amplifier Module with Onboard Micro-USB Battery Charging

Specification:-

• Bluetooth Version: 4.2
• Output Power: 5W + 5W (stereo)
• Operating Voltage: 3.7V to 5V DC
• Charging Port: Micro-USB
• Audio Input: Bluetooth
• Signal-to-Noise Ratio (SNR): >90dB
• Distortion: <0.1% at 1kHz

TPA3116D2 AP55 BT Module 100 Watt Bluetooth Audio Board with Remote

Specification:-

• Support Bluetooth 5.0 Bluetooth name: GD-82EM
• The power supply voltage ranges from 8 to 24V
• Infrared remote control from 4 to 7M
• FM band 87.5-108.0MHZ
• Support external audio source input AUX

5V Wireless HI-FI USB/ FM / 5 watt + 5 watt Audio Amplifier Bluetooth Circuit Module with Display & C-Type Jack

Specification:-

• Working voltage: 5V
• Support:  mp3/Bluetooth/USB/aux/FM/memory card
• Excellent sound quality
• Remote for easy handling
• Can connect speakers directly
• USB: Connect the USB flash drive 

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier module pack of 1pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power  :  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 10pcs

Specification:-

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power:  10W+10W
4. Chip name:  PAM8610
5. Efficiency:  90%
6.  Frequency response:  20Hz to 50KHz

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 50pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier modules pack of 10pcs

Specification

1. Operating voltage:  12V to 24V
2. Output Power:  30W+30W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Supply current  :  more than 3A

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier modules pack of 50pcs

Specification

1. Operating voltage:  12V to 24V
2. Output Power:  30W+30W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Supply current  :  more than 3A

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 10pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 50pcs

Specification

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power  :  10W+10W
4. Chip name  :  PAM8610
5. Efficiency  :  90%
6.  Frequency response  :  20Hz to 50KHz

TPA3110 30W Mono (single) channel digital power amplifier modules pack of 50pcs

Specification

1. Chip name:  TPA3110
2. Working Voltage:  8V to 26 V DC
3. Output Power  :  30W
4. Applicable Speaker Impedance  :  8 Ω is perfect but 4/6 is also good
5. Single-channel digital power amplifier
6. Sound quality is also very good

TPA3110 30W Mono (single) channel digital power amplifier modules pack of 10pcs

Specification

1. Chip name:  TPA3110
2. Working Voltage:  8V to 26 V DC
3. Output Power  :  30W
4. Applicable Speaker Impedance  :  8 Ω is perfect but 4/6 is also good
5. Single-channel digital power amplifier
6. Sound quality is also very good

PAM8610 10W+10W Two channel audio stereo amplifier modules pack of 10pcs

Specification:-

1. Operating voltage  :  7V to 15V (12V is suitable)
2. Current Rating : 2.5Amp
3. Power rating:  10W + 10W
4. Working Mode:  Class - D
5. Chip name:  PAM8610
6. Mute switch functionality
7. Low noise power amplifier
8. It does not require a heatsink

TPA3110 2x15W Dual channel stereo audio power amplifier modules pack of 10pcs

Specification

1. Operating voltage:  8V to 18V
2. Output Power:  15W+15W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Signal to noise ratio  :  100DB
7. Supply current  :  more than 3A

TPA3110 2x15W Dual channel stereo audio power amplifier modules pack of 50pcs

Specification

1. Operating voltage:  8V to 18V
2. Output Power:  15W+15W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Signal to noise ratio  :  100DB
7. Supply current  :  more than 3A

TPA3116 Dual channel stereo 2 x 50W audio amplifier circuit modules pack of 10pcs

Specification

1. Dual channel
2. Output power:  50W+50W
3. New filter less design
4. Excellent sound quality
5. Operating voltage  :  12V to 24V
6. Current handling capacity  :  3A
7. IC name  :  TPA3116
8. Can easily drive small speakers

PAM8610 10W+10W Two channel audio stereo amplifier modules pack of 50pcs

Specification

1. Operating voltage  :  7V to 15V (12V is suitable)
2. Current Rating : 2.5Amp
3. Power rating:  10W + 10W
4. Working Mode  :  Class - D
5. Chip name  :  PAM8610
6. Mute switch functionality
7. Low noise power amplifier
8. Does not require a heatsink

TPA3118 60W Mono (single) channel digital power amplifier modules pack of 50pcs

Specification

1. Operating Voltage:  4.5V to 24V DC
2. Multiple Switching Frequencies
3. Short circuit protection
4. Stereo and Mono Mode
5. Master and Slave Synchronization
6.  Single-Filter Mono Configuration

TPA3116 Dual channel stereo 2 x 50W audio amplifier circuit modules pack of 50pcs

Specification

1. Dual channel
2. Output power:  50W+50W
3. New filter less design
4. Excellent sound quality
5. Operating voltage  :  12V to 24V
6. Current handling capacity  :  3A
7. IC name  :  TPA3116
8. Can easily drive small speakers

PAM8406 5Wx2 dual channel stereo Mini digital amplifier modules with volume control preset pack of 10pcs

Specification

1. Working voltage:  5V
2. Output power:  5W+5W
3. Dual channel stereo
4. High sound quality
5. Excellent noise suppression system
6. Can drive 4 and 8 omega speakers easily
7. Left and Right volume controller

TPA3118 60W Mono (single) channel digital power amplifier module pack of 1pcs

Specification:-

1. Operating Voltage  :  4.5V to 24V DC
2. Multiple Switching Frequencies
3. Short circuit protection
4. Stereo and Mono Mode
5. Master and Slave Synchronization
6.  Single-Filter Mono Configuration

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier module pack of 1pcs

Specification:-

1. operating range: 12 to 24 volts
2. Output Power: Dual Channel, 30W+30W
3. IC code: TPA3110.
4. Impedance of the output: 4 to 8 ohm ()
5. More than 3A in supply current

PAM8610 10W+10W Two channel audio stereo amplifier module pack of 1pcs

Specification

1. Operating voltage  :  7V to 15V (12V is suitable)
2. Current Rating : 2.5Amp
3. Power rating  :  10W + 10W
4. Working Mode  :  Class - D
5. Chip name  :  PAM8610
6. Mute switch functionality
7. Low noise power amplifier
8. Does not require a heatsink

TPA3110 2x15W Dual channel stereo audio power amplifier module pack of 1pcs

Specification

1. Operating voltage:  8V to 18V
2. Output Power:  15W+15W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Signal to noise ratio  :  100DB
7. Supply current  :  more than 3A

PAM8406 5Wx2 dual channel stereo Mini digital amplifier module with volume control preset pack of 1pcs

Specification

1. Working voltage:  5V
2. Output power:  5W+5W
3. Dual channel stereo
4. High sound quality
5. Excellent noise suppression system
6. Can drive 4 and 8 omega speakers easily
7. Left and Right volume controller

PAM8610 10W+10W Dual channel stereo audio amplifier board module pack of 1pcs

Specification:-

1. Dual channel audio amplifier
2. Working voltage  :  12V
3. Output power  :  10W+10W
4. Chip name  :  PAM8610
5. Efficiency  :  90%
6.  Frequency response  :  20Hz to 50KHz

TPA3116 Dual channel stereo 2 x 50W audio amplifier circuit module pack of 1pcs

Specification:-

1. Dual channel
2. Output power:  50W+50W
3. New filterless design
4. Excellent sound quality
5. Operating voltage:  12V to 24V
6. Current handling capacity:  3A
7. IC name:  TPA3116
8. Can easily drive small speakers

MP3-TF-16P MP3 Disk TF Card Module With Serial Port Pack of 1

Specification

1. Support Mp3 and WMV decoding
2. Input supply voltage:  3.2V-5V
3. DAC output  :  24 bit
4. SNR support  :  85db
5. Fully supports FAT16, FAT32 file system
6. Max. supportable card  :   32G TF card
7. Supports sampling rates (kHz)  :  8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48.

Combo of Wireless Hi-Fi Boombox Audio Module with Dual 2-Inch 4Ω 5W Woofer Speaker

Specification:-

1. Working voltage  :  5V
2. Support  :  mp3/bluetooth/USB/aux/FM
3. Excellent sound quality
4. Convenient
5. Cheap and easy to install

Combo of 3W+3W Audio Amplifier Board with Bluetooth Audio Module

Specification:-

1. PAM8403 – GF1002
   1. New and branded quality product
   2. Dual channel
   3. Power output  :  3W+3W
   4. Operating voltage  :  2.5V to 5.5V
   5. Recommended voltage  :  5V
   6. Excellent sound quality
   7. On board switch potentiometer
2. KCX BT002
   1. Working voltage  :  Dc 3.3V to 5.0 V
   2. Provide good sound quality
   3. Easy to setup with other amplifier
   4. Very low power consumption
   5. Very small size

HW-302 XH-M139 2.1 channel digital power amplifier board 12V to 24V wide voltage TPA3116D2 module

Specification

1. Operating voltage : 12V to 24V
2. Power rating : 2*50W + 100W
3. Output load : 4Ω to 8Ω
4. Frequency range : 14KHz to 100KHz
5. Operating frequency : 1.2MHz
6. Number of channels : 3 channels(Left channel + Right channel + Subwoofer)

XH-M543 120W TPA3116D2 Dual channel high power audio amplifier module

Specification:-

1. Model : XH-M543
2. Chip type : TPA3116D2
3. Operating voltage : 12V to 24V
4. Output power : 120W per channel
5. Number of channel : 2
6. High quality sound with low noise

TDA2030A 6V to 12V 18 watt Audio Amplifier Module

Specification:-

1. IC type: TDA2030A
2. Working voltage: 6V to 12V
3. Audio output: 18 watt
4. Onboard 10K resistors for volume adjustment
5. Onboard horn socket
6. Onboard power indicator light

5V-12V Wireless HI-FI Amplifier circuit modules with in-built Mic and Wires

·    Specification

1. Working voltage  :  5V to 12V 
2. Output current  :  5 Watt
3. Support  : MP3/Bluetooth/USB/AUX/FM
4. Excellent sound quality
5. Convenient
6. Cheap and easy to install

12V-20V input 5V output Wireless HI-FI Amplifier circuit modules

Specification

1. Working voltage  : 12V-20V 
2. Output current  :  2x40 Watt
3. Support  :  mp3/ Bluetooth /USB/aux/FM
4. Excellent sound quality
5. Convenient
6. Cheap and easy to install

Decoder Board Audio Wireless Amplifier Module FM, USB, AUX, TF, MP3 Stereo Audio Player Decoder Module with Remote for Amplifier ( 115 x 50)mm

Specification:-

1. Multiple inputs: FM, USB, AUX, TF, MP3.
2. Stereo audio output for amplifier connection.
3. Includes a remote control for easy operation.
4. Compact dimensions: (115 x 50)mm, making it suitable for various audio amplification and playback applications.
5. Input Power : 9-12V DC

PAG-40-BT-V1.0 Digital Amplifier Module With Microphone Bass V0.1

Specification:-

1. Voice recorder, FM Radio
2. Support MP3 WAV
3. Recording Microphone bass 
4. Wire Microphones
5. Buttons: four buttons, multi-directional control, PLAY VOL-/ / VOL+ / MODE
6. With digital display;
7. JST wire

ISD1820 Recording Module Voice Board With On Board Mic and Loud Speaker

Specification

1. Voltage Supply: 3V - 5.5V
2. Recording Duration: 10-20 seconds (adjustable)
3. Onboard Microphone and Loudspeaker
4. Simple Button Controls

Combo of 14-Type Labeled Capacitor Kit (355 pcs) | Assorted Ceramic & Electrolytic Capacitor

Specification:-

• High-Quality Construction
• Perfect for DIY electronics enthusiasts
• Includes a variety of ceramic capacitors for stability.
• Electrolytic capacitors for higher capacitance needs
• Provides protection during transportation and organized storage.

JQ6500 MP3 Audio Voice Serial Port Control Broadcast Module

Specifications:-

• Audio Format: MP3
• Rated current: 20mA
• Input Voltage: 3.2V-5V (best 4.2V)
• Output: Stereo audio output, optional on-board amplifier output
• UART interface: standard serial port, TTL level, baud rate can be set

AM8403 HW104 5V Two Channel Stereo 3W+3W Audio Amplifier Module with JST Connector

Specification:-

• 2 channels 3 W PAM8403 audio amplifier
• Output Power: 3W + 3W
• Working Voltage: 2.5 to 5.5V
• Board Size: 22 x 18 mm 
• JST Connector
• High amplification efficiency

C-Type 2 Channel BT5.0 Stereo Audio Amplifier 3.7-5V MP3 Audio Receiver Module

Specification:-

• Maximum Supply Voltage: 5 Volts
• Minimum Supply Voltage: 3.7 Volts
• Dimensions: 30 x 30 x 1.5 mm
• Support profile: A2DP, AVCTP, AVDTP, HFP
• BT5.0-Audio: Genuine 5.0 Blue tooth audio decoding chip

5V DC MP3 Player Decoder Board with USB, TF Card, AUX & FM | Digital Display Audio Module with Remote Control

Specification:-

• Working voltage:  5V
• Support:  mp3/Bluetooth/USB/aux/FM/memory card
• Audio Formats Supported: MP3
• Input Options: USB, TF Card (Micro SD), AUX IN
• FM Radio: Yes (Built-in FM Receiver)
• Control: Button Control + IR Remote Control
• Excellent sound quality
• Can connect speakers directly
• Remote for easy handling

Two Channel 5W+5W Audio Amplifier Module | DC 5V Mini Stereo Sound Amplifier Board for Home & Car Speakers

Specification:-

• Bluetooth Version: 5.0.
• Voltage: DC 5V
• Chip Type: PAM8403
• Number Of Channels: 2
• Output Power: 2 X 5W
• Magnification: 4 Times
• Amplifier Type: Mini Stereo Sound Amplifier Board

Combo of 6283 IC Stereo Circuit Board and Bluetooth with Remote

Specifications:

• 100% OK Tested Product
• combo of 6283 IC Stereo Circuit Board and Bluetooth FM Audio Player Decoder Module Kit
• In 6284 IC you can give sound input from other sound sources like Mobile, TV, DVD, Computer, Projector
• Bluetooth FM Support MP3/USB/TF/AUX/FM/BLUETOOTH

TDA2030 3 TR 2.1/4.1 Home theater 60 watt audio amplifier circuit board with Inbuilt bluetooth and 3 potentiometer controller

Specifications:-

1. 100% Brand new and premium quality
2. Type: 2.1/4.1 home theater
3. Power rating: 60 Watt
4. Home theater audio board
5. Pleasant sound and bass boosted
6. Bigger heatsink for longer playback
7. Power up to 3 amp support

PAG-5V USD,SD, Mp3 Audio Amplifier Module Board -V2.4

Specification:-

1. MP3,WAV
2. FM Radio, MP3/FM/TF/AUX
3. Resume Function, remote control
4. Pro Audio, Amplifier, Speaker, car audio  
5. Working voltage 5V 
6. JST wire

Digital Audio Power Amplifier Board 12V-24V TPA3110 30W+30W Car for USB Speaker Portable Speaker Bluetooth 4.2

Specifications:-

• Number of channel:  2
• Voltage: 26 Volts, 5 Volts, 16 Volts, 24 Volts, 12 Volts
• Material:    Copper
• Item model number: ‎TPA3110
• output power is 30W X 2 (16v)
• Sound Recorder and Sound Circuit

4 TR 4.1 Home Theater Audio Amplifier Circuit Board

Specifications:-

• Current 1.5 to 3 amp.
• Material: Silicone
• Power up to 3 amp support
• 4.1 channel - 120 Watt Home theater audio board
• 100% Brand new and premium quality

TDA2030 5.1/6.1 Home Theater 100W Audio Amplifier Board with Bluetooth FM | Remote | Bass Boost & Filter Circuit

Specifications:-

• 100% Branded, new and premium quality
• 5.1-channel, 100-watt Watt Home theater audio board
• Bluetooth Module Support: MP3/USB/TF/AUX/FM/BLUETOOTH
• Heavy-channel heatsinks prevent it from heating, increasing the life of the circuit.
• 100% Branded, new and premium quality

Combo of Amplifier Board Combo with 2" Speakers & Volume Knob Control (DIY Kit)

Specification:-

• Dual channel
• Power output:  3W+3W
• Recommended voltage:  5V
• Excellent sound quality
• On-board switch potentiometer
• Diameter of the speaker: 2 inches (53mm)

TDA3110 20w+20w Dual Channel DC 12V Audio Amplifier Board

Specifications:-

• Amplifier Chip: TDA3110
• Output Power: 20W + 20W (dual-channel stereo)
• Operating Voltage: DC 12V
• Input Impedance: 20 kΩ (unbalanced)
• Signal-to-Noise Ratio (SNR): >90 dB
• Frequency Response: 20 Hz - 20 kHz

120W Bass Tube Car Amplifier Board 12V High Power With Bluetooth

Specification:-

• Output power: 120W
• Power Supply: 12DC
• Color: Black
• Channel Type: Mono
• Number of Channels: 2
• Amplifier Class: Class AB
• Frequency Response: 50Hz–21KHz

PIR Motion Detector Sensor Module

Specifications:-

1. Detection Range: Usually between 16 and 23 feet (5 to 7 meters)
2. The angle of detection: is typically 120 degrees
3. Operating Voltage: Typically between 3.3 and 5 volts DC
4. Sensitivity Adjustment: Frequently features sensitivity settings that can be changed.
5. Output Signal: Digital (High/Low) or Analog (Voltage)

Snow Raindrops Humidity Rain Weather Detect Sensor Module For Arduino

Specifications:-

1. Operating voltage : 3.3V to 5V
2. Distribution bit to adjust sensitivity
3. A fixed bolt hole for easy installation
4. Power indicator, the output signal LED indicator
5. A large area of ​​rain board, more appropriate to detect rain
6. Board with positioning holes to facilitate installation

PWM DC Motor Speed Controller Speed Switch Module 6V/12V/24V/28V 3A 1203B

Specification:-

• Model: 1203B
• Input Voltage: 6V–28V DC
• Output Current: Max 3A continuous
• Control Method: PWM (Pulse Width Modulation)
• Speed Adjustment: Rotary potentiometer (knob)
• Compact & lightweight PCB design

DC-DC 0.9V to 5V Converter USB Step Up Power Boost Modules Mini PFM Control pack of 10pcs

Specification:-

1. 100% branded and high quality product
2. Input voltage  :  0.9V to 5V
3. Output voltage :  5V
4. Led indicator
5. Mini PFM control
6. High conversion efficiency