74LS74 Dual D-type Positive Edge-triggered Flip-Flops IC DIP-16 Package

Specification:-

• Number of pins: 16
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C 
• Storage temperature range: –65°C to +150°C

74LCX74MX Flip Flop 2-Element D-Type Logic IC 1-Bit Positive Edge 14-SOIC

Specification:- 

• SOIC14 (0.154", 3.90mm)
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 2 Circuit
• Propagation Delay Time: 8 ns
• High Level Output Current: - 24 mA
• Low Level Output Current: 24 mA
• Supply Voltage - Min: 2 V
• Supply Voltage - Max: 3.6 V

74LS76 Dual JK Flip-Flop with Set and Clear IC DIP-16 Package

Specification:-

• Number of pins: 16
• Supply Voltage: 4.75 – 5.25Vdc
• Maximum Clock Frequency: 40Mhz
• Output Current: 8m A
• Propagation Delay: 10nS
• Power Dissipation: 2mW/gate @100kHz

74LS73 Dual JK Flip-Flop with Clear IC DIP-14 Package

Specification:-

• Number of pins: 14
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C 
• Storage temperature range: –65°C to +150°C

74LS109 Dual J-K Positive Edge-Triggered Flip-Flop IC DIP-16 Package

Specification:-

• Number of pins: 16
• IC Type: Flip Flop
• No. of Bits: 2
• Input Voltage (VCC: 4.75 to 5.25V
• Propagation delay (Max): 20ns
• Operating free-air temperature range: 0°C to +70°C

74LS10 Dual J-K Positive Edge-Triggered Flip-Flop IC DIP-16 Package

Specification:-

• Number of pins: 16
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to 70°C
• Storage temperature range: -65°C to 150°C

74HC574 Tri State Octal D-Type Flip-Flop IC DIP-20 Package

Specification:-

• Number of pins: 20
• Mounting: Through Hole
• Wide operating voltage range: 2V–6V
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Input Voltage (VIN):  −1.5V to VCC + 1.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 600 mW
• Operating Temperature (°C): − 65°C to + 150°C

74HC374 3-State Output Octal D-Type Flip-Flop IC DIP-20 Package

Specification:-

• Number of pins: 20
• Frequency: 70MHz
• Current Rating: 7.8mA
• Propagation Delay: 20ns
• Wide operating voltage range: 2 to 6V
• Operating Temperature (°C): − 40°C to + 85°C

74HC273 Octal D-Type Flip-Flop with Reset IC DIP-20 Package

Specification:-

• Number of pins: 20
• Propagation Delay: 18ns
• Frequency: 20MHz
• Current Rating: 5.2mA
• Wide operating voltage range: 2 to 6V
• Operating Temperature (°C): − 40°C to + 85°C

74HC174 Hex D-type Flip-Flop with Reset IC DIP-16 Package

Specification:-

• Number of pins: 16
• Propagation Delay: 16ns
• Current Rating: 5.2 mA
• Wide operating voltage range: 2 to 6V
• Operating Temperature (°C): − 40°C to + 85°C

74LS74 Dual D-type Positive Edge-triggered Flip-Flops SMD IC

Specification:-

• Mounting: SMD
• Input levels: CMOS level
• Supply Voltage range: 4.5 to 5.5V
• Output Current: -0.4mA
• Output Current: 8mA
• Operating Temperature: 0°C to 70°C

74LS73 Dual JK Flip-Flop SMD IC

Specification:-

• Mounting: SMD
• Input levels: CMOS level
• Supply Voltage range: 4.5 to 5.5V
• Output Current: -0.4mA
• Output Current: 8mA
• Operating Temperature: 0°C to 70°C

74HC574 Tri State Octal D Type Flip-Flop SMD IC

Specification:-

• Mounting: SMD
• Operating Voltage Range: 2 V – 6 V
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Diode Current: ±20 mA
• DC Output Diode Current: ±20 mA
• Operating Temperature: 65°C to 150°C

74HC374 3-State Output Octal D-Type Flip-Flop SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Voltage:  − 1.5 to VCC + 1.5V
• DC Output Voltage: − 0.5 to VCC + 0.5V
• Clamp Diode Current: ± 20
• Operating Temperature: -65°C to 150°C

74HC273 Octal D-Type Flip-Flop with Reset SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Voltage:  − 1.5 to VCC + 1.5V
• Operating Temperature: -65°C to 150°C
• Typical propagation delay: 18 ns

74HC174 Hex D-type Flip-Flop with Reset SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Typical propagation delay: 16 ns
• Wide operating voltage range: 2–6V
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Voltage: − 1.5 to VCC + 1.5V
• DC Output Voltage: − 0.5 to VCC + 0.5V
• Temperature Range − 65°C to + 150°C

74HC109 Dual J-K Positive-Edge-Triggered Flip-Flops SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• Input Clamping Current: ±20 mA
• Output Clamping Current: ±20 mA
• J and K inputs for easy D-type flip-flop
• Storage Temperature Range : −65°C to + 150°C

CD40175 Quad D-Type FlipFlop IC (DIP-16 Package)

Specification:-

• DC Supply Voltage Range, (VDD): -0.5V to +20V
• Input Voltage Range, All Inputs: -0.5V to VDD +0.5V
• Operating Temperature Range: -55°C to +125°C
• DC Input Current, Any One Input: ±10mA
• Storage Temperature Range (TSTG): -65°C to +150°C
• Lead Temperature (During Soldering): +265°C

CD4027 Dual JK Flip Flop IC (DIP-16 Package)

Specification:-

• Supply Voltage:  3V to +18V
• Noise margin (full package-temperature range) =
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• 5-V, 10-V, and 15-V parametric ratings
• Maximum input current of 1 µA at 18 V
• Temperature range; 100 nA at 18 V and 25°C

CD4013 Dual D Type Flip-Flop IC (DIP-14 Package)

Specification:-

• Output type: Push-Pull
• Input type: Standard CMOS
• Wide supply voltage range: 3V to 18V
• Noise Margin (Over Full Package Temperature Range):
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• Medium-Speed Operation: 16 MHz (Typical) 

CD4013 Dual D Type Flip-Flop SMD IC

Specification:-

• Wide supply voltage range: 3.0V to 15V
• High noise immunity: 0.45 VDD (typ.)
• DC Supply Voltage: -0.5 VDC to +18 VDC
• Input Voltage: 0.5 VDC to VDD +0.5 VDC
• Storage Temperature: -65°C to +150°C
• Power Dissipation: 700 mW
• Lead Temperature: 260°C

DM74ALS175N Flip Flop 1-Element D-Type Logic IC 4-Bit Positive Edge 16-PDIP

Specification:- 

• Package: PDIP16 (0.300", 7.62mm)
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 4 Circuit
• Input Type: Single-Ended
• Polarity: Inverting/Non-Inverting
• Low Level Output Current: 8 mA
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

DM74LS175N Flip Flop 1-Element D-Type Logic IC 4-Bit Positive Edge 16-PDIP

Specification:- 

• Package: PDIP16 (0.300", 7.62mm)
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 4 Circuit
• Input Type: Single-Ended
• Polarity: Inverting/Non-Inverting
• Low Level Output Current: 8 mA
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

74ACT175SCX Flip Flop 1-Element D-Type Logic IC 4-Bit Positive Edge 16-PDIP

Specification:- 

• Package: SOIC16 (0.154", 3.90mm)
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 4 Circuit
• Input Type: Single-Ended
• Polarity: Inverting/Non-Inverting
• High Level Output Current: - 24 mA
• Low Level Output Current: 24 mA
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

DM74174N Flip Flop 1-Element D-Type Logic IC 6-Bit Positive Edge 16-PDIP

Specification:- 

• Package: PDIP14 (0.300", 7.62mm)
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 4 Circuit
• Input Type: Single-Ended
• Polarity: Non-Inverting
• Propagation Delay Time: 25 ns
• High Level Output Current: - 800 uA
• Low Level Output Current: 16 mA
• Supply Voltage - Min: 4.75 V
• Supply Voltage - Max: 5.25 V

74F174PC Flip Flop 1-Element D-Type Logic IC 6-Bit Positive Edge 16-PDIP

Specification:- 

• Package: PDIP16 (0.300", 7.62mm)
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 4 Circuit
• Input Type: Single-Ended
• Polarity: Non-Inverting
• Propagation Delay Time: 10 ns
• High Level Output Current: - 1 mA
• Low Level Output Current: 20 mA
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

74F374N Flip Flop 1-Element D-Type Logic IC 8-Bit Positive Edge 20-PDIP

Specification:- 

• Package: PDIP20 (0.300", 7.62mm) 
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 4 Circuit
• Input Type: Single-Ended
• Polarity: Non-Inverting
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

74ACT374PC Flip Flop 1-Element D-Type Logic IC 8-Bit Positive Edge 20-PDIP

Specification:- 

• Package: PDIP20 (0.300", 7.62mm) 
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 8 Circuit
• Input Type: Single-Ended
• Polarity: Non-Inverting
• High Level Output Current: - 24 mA
• Low Level Output Current: 24 mA
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

74F273PC Flip Flop 1-Element D-Type Logic IC 8-Bit Positive Edge 20-PDIP

Specification:- 

• Package: PDIP20 (0.300", 7.62mm) 
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 8 Circuit
• Input Type: Single-Ended
• Polarity: Non-Inverting
• Propagation Delay Time: 9 ns
• High Level Output Current: - 1 mA
• Low Level Output Current: 20 mA
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

DM74ALS273WMX Flip Flop 1-Element D-Type Logic IC 8-Bit Positive Edge 20-PDIP

Specification:- 

• Package: SOIC20 (0.295", 7.50mm)
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 8 Circuit
• Input Type: Single-Ended
• Polarity: Non-Inverting
• Propagation Delay Time: 15 ns
• High Level Output Current: - 2.6 mA
• Low Level Output Current: 24 mA
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

74ACT377SCX Flip Flop 1-Element D-Type Logic IC 8-Bit Positive Edge 20-PDIP

Specification:- 

• Package: SOIC20 (0.295", 7.50mm)
• Logic Type: D-Type Flip-Flop
• Number of Circuits: 8 Circuit
• Input Type: Single-Ended
• Polarity: Non-Inverting
• High Level Output Current: - 24 mA
• Low Level Output Current: 24 mA
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

74HCT74N Flip Flop 2-Element D-Type Logic IC 1-Bit Positive Edge 14-PDIP

Specification:- 

• Package: PDIP14 (0.300", 7.62mm)
• Logic Type: D-Type Flip-Flop
• Propagation Delay: 15ns
• Output Current: 4mA
• Supply Voltage Max: 5.5V
• Supply Voltage Min: 4.5V
• Frequency: 59MHz

DM74S112N Flip Flop 2 Element JK-Type Logic IC 1 Bit Negative Edge 16-PDIP

Specification:- 

• Package: PDIP16 (0.300", 7.62mm)
• Logic Type: J-K Type Flip-Flop
• Input Type: Single-Ended
• Polarity: Inverting/Non-Inverting
• Propagation Delay Time: 12 ns
• High Level Output Current: - 1 mA
• Low Level Output Current: 20 mA
• Supply Voltage - Min: 4.75 V
• Supply Voltage - Max: 5.25 V

DM74LS109N Flip Flop 2 Element JK-Type Logic IC 1 Bit Positive Edge 16-PDIP

Specification:- 

• Package: PDIP16 (0.300", 7.62mm)
• Logic Type: J-K Type Flip-Flop
• Mounting Type: Through Hole
• Low Level Output Current: 8 mA
• Supply Voltage - Min: 4.75 V
• Supply Voltage - Max: 5.25 V

GD74HCT174E Flip Flop 1-Element D-Type 6-Bit Logic IC Positive Edge 16-PDIP

Specification:-

• Package: PDIP16 (0.300", 7.62mm)
• Number of Terminals: 16
• Number of Bits: 6
• Supply Voltage-Max (Vsup): 5.5 V
• Supply Voltage-Min (Vsup): 4.5 V
• Supply Voltage-Nom (Vsup): 5 V

CD74HCT175E Flip Flop 1 Element D-Type Logic IC 4 Bit Positive Edge 16-PDIP

Specification:-

• Package: PDIP16 (0.300", 7.62mm)
• Number of Circuits: 4 Circuit
• Propagation Delay Time: 33 ns
• High Level Output Current: - 4 mA
• Low Level Output Current:  4 mA
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

74ACT374E Flip Flop 1 Element D-Type Logic IC 8 Bit Positive Edge 20-PDIP

Specification :-

• Package: PDIP20 (0.300", 7.62mm) 
• Polarity: Non-Inverting
• Propagation Delay Time: 11.2 ns
• High Level Output Current: - 24 mA
• Low Level Output Current: 24 mA
• Supply Voltage - Min: 4.5 V
• Supply Voltage - Max: 5.5 V

VC921 4000 Counts Pocket Type Digital Multimeter with The Flipped Cover

Specification:-

• High Voltage Range: AC 400V / DC 600V 
• Resistance Range: 40.00MΩ
• AC/DC current: 20A
• Display Count: 4000 Counts
• DC Voltage:  400.0mV/4.000V/40.00V ±(0.5%+4)
• 400.0V/600V  ±(0.8%+4)
• AC Voltage: 400.0mV/4.000V/40.00V/400.0V  ±(1.2%+4)
• 600V  ±(1.5%+4)

4000rpm 3V-9V DC high speed mini electric motor

Specification:-

1. Motor diameter  :  2.7mm approx.
2. Motor length  :  50mm approx.
3. Working voltage range  :  3V to 9V
4. Power rating  :  1.2W
5. Rated current  ;  0.6A
6. Keep away from children under 15 years

PS817 General purpose photocoupler DIP 4 Pins IC pack of 50pcs

Specification:-

1. Advance technology
2. Input diode forward voltage  :  1.25V
3. Collector-emitter voltage  :   80V
4. Collector current :  50mA
5. Cut-off frequency :  80 kHz
6. Rise time  :  18us
7. Fall time  :  18us

Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control

Specifications:-

1. Operating Voltage: DC 4.8-6V
2. Offer 3 modes to check servos or ESC
3. Connect to up to 3 servos simultaneously
4. Connect up to 3 ESCs to test and compare their reaction time respectively
5. Built with LED indicators

1000KV Brushless Motor 3.17mm Shaft Electric Motor

Specifications:-

1. KV (rpm/volt)  :  1000
2. Thrust:  900/4
3. Efficiency:  80%
4. Efficiency current  :  4-10A (>75%)
5. Current capacity:  12A/the 60s
6. Load current at 10v:  0.5A
7. Working voltage:  7V-12V

4.5V to 35V DC PWM Speed Controller Mini Electrical Motor Control Switch LED Dimmer Module

Specification:-

1. Operating voltage: DC 4.5V to 35V
2. Control power: 90W (maximum)
3. Quiescent current: 0.015A (standby)
4. PWM duty cycle: 1% -100%
5. PWM frequency: 10khz
6. Size: 29mm*23mm
7. Total height: 15mm

TP4056 Micro USB 5V 1A Lithium battery charging module (b-type) pack of 1pcs

Specifications:-

1. Input supply voltage: -0.3V to 8V
2. Short-Circuit Duration: Continuous
3. BAT Pin Current: 1200 mA
4. PROG Pin Current: 1200 uA

Laser Transmitter Module For Arduino AVR PIC

Specifications 

1. Operating Voltage: 5V.
2. Output Power: 5mW.
3. Wavelength: 650nm (red laser).
4. Suitable for Arduino, AVR, and PIC microcontroller projects.

UNO R3 AVR USB Development board with ATMEG16U2 microcontroller chip

Specification:-

1. Model name : UNO Rev3
2. Chip name : ATmega16U2
3. Operating voltage : 5V
4. Recommended voltage range : 5V to 12V
5. Digital input/output pins : 14 (of which 6 provide PWM output).
6. Analog input/output pins : 6

5V 1 channel relay module compatible with 5V microcontroller

Specification:-

1. Number of channels: 1
2. Supply voltage: 3.75V to 6V
3. Quiescent current: 2mA
4. Trigger voltage: 5V
5. Trigger current: 20mA
6. Current when the relay is active: 70mA
7. Relay maximum contact voltage: 250V AC or 30V DC
8. Relay maximum current:  10A

SS12D00 0.3A 30V SPDT 3 pin metal body panel mount plastic handles slide switches pack of 100pcs

Specification:-

1. 100% Original and best quality product
2. Type  :  single pole, double throw
3. Mode of Operation   :  slide
4. Max. current withstand  :  125V
5. Max. power rating  :  0.5A
6. High temperature withstand
7. Long life approximately 10,000 clicks
8. High wear and tear properties
9. Durable and excellent design

SS13D07 0.3A 30V SP3T 4 pin metal body panel mount plastic handle slide switch pack of 5pcs

Specification

1. 100% Original and best quality product
2. Type:  single pole, triple throw ( one at a time)
3. Mode of Operation:  slide
4. Max. current withstand:  250V
5. Max. power rating:  1A
6. High temperature withstand
7. Long life approximately 10,000 clicks
8. High wear and tear properties
9. Durable and excellent design

SS12F23G5 0.3A 30V SPDT 3 pin metal body panel mount plastic handle slide switches pack of 20pcs

Specification

1. 100% Original and best quality product
2. Type:  single pole, double throw
3. Mode of Operation   :  slide
4. Max. current withstand  :  250V
5. Max. power rating  :  1A
6. High temperature withstand
7. Long life approximately 10,000 clicks
8. High wear and tear properties
9. Durable and excellent design

SS12F23G5 0.3A 30V SPDT 3 pin metal body panel mount plastic handles slide switches pack of 100pcs

Specification

1. 100% Original and best quality product
2. Type:  single pole, double throw
3. Mode of Operation   :  slide
4. Max. current withstand  :  250V
5. Max. power rating  :  1A
6. High temperature withstand
7. Long life approximately 10,000 clicks
8. High wear and tear properties
9. Durable and excellent design

Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino

Specifications:-

1. Connects to Arduino using standard SPI pins.
2. Supports Micro SD and TF card formats.
3. Includes a built-in voltage level shifter for 5V and 3.3V systems.
4. Easily interfaces with Arduino for data storage and retrieval.

18650 Triple Lithium battery spacer hard plastic holders for DIY battery pack - 500 pieces

Specifications:-

1. 100% Branded and high-quality product
2. Holds three 18650 lithium batteries
3. Type: 18650 lithium battery spacer
4. High-quality plastic material
5. Convenient to use
6. High wear and tear properties
7. Durable and excellent design

Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducer Sensor DC 5V 2-450cm

Specification:-

1. Operating voltage: 5V DC
2. Operating current: 15mA
3. Measure angle: 15°
4. Ranging distance: 2cm - 400cm
5. Working frequency: 40Hz
6. Trigger input signal: 10uS TTL pulse
7. Echo output signal: Input TTL lever signal and the range in proportion
8. Working voltage : 5V(DC)
9. Static current: Less than 2mA.
10. Output signal: Electric frequency signal, high-level 5V, low-level 0V.

R307 Optical Fingerprint Reader Sensor Module

Specification:-

1. Type: Optical
2. Sensor Life: 100 million times
3. Static indicators: 15KV
4. RS232 communication baud rate: 9600BPS~115200BPS changeable
5. Image Capture Surface 20*15(mm)
6. Verification Speed:  0.2 sec
7. Scanning Speed: 0.3 sec
8. Character file size:  256 bytes

Microphone Sound Sensor, Voice Sensor High Sensitivity Sound Detection, Whistle Module

Specification:-

1. Operating voltage : 3.3V to 5V DC
2. LM393 comparator with threshold preset
3. Induction distance: 0.5 Meter
4. Operating current:  4 to 5 mA
5. Microphone sensitivity (1kHz): 52 to 48 dB
6. Easy to use with Microcontrollers or even with normal Digital/Analog IC

LM3914 Logarithmic LED dot or bar display driver 18 pins IC pack of 50pcs

Specification

1. Analog controlled LED Driver IC
2. Number of controllable LEDs : 10
3. Operating voltage :  3V to 18V
4. Input analog voltage range : 1.2V to 12V
5. LED sink current :  2mA to 30mA (programmable)
6. Both Dot and Bar display mode available

Micro size 8520 1500KV brushed coreless motor

Specifications:-

1. Product name  :  Coreless Motor
2. Motor diameter  :  5.0mm
3. Motor length  :  20mm
4. Shaft diameter  :  1.0mm
5. Cable length  :  70mm

CD4060 14 stage binary ripple counter 16 pin IC pack of 2pcs

Specification

1. 14-bit Binary counter or Divider IC
2. Counting range :  0 to 16383 (In decimal)
3. Operating voltage:  3V to 18V
4. Number of pins: 16
5. Maximum clock frequency: 30MHz at 15V
6. Medium speed operation :  8MHz at VDD = 10V

BT136-600D Transistors Max 600V 4A pack of 10pcs

Specifications

1. Maximum terminal current : 4A
2. On-state gate voltage : 1.4V
3. Gate trigger current : 10mA
4. Max terminal voltage : 600 V
5. Holding current : 2.2mA
6. Latching current : 4mA
7. Package includes : 10 pieces

40mm Insulated crocodile alligator clip or test clamps pack of 20 pair

Specifications

1. Length of the clip  :  40mm.
2. 100% Brand new and high quality.
3. Easy and quick to connect.
4. Rubber insulated.
5. Attractive design and strong teeth for attachment.
6. Easy flow of current.
7. 40 clips (20 clips of red and 20 clips of black)

0.56 inch 1 digit red display color 7 segment LED display COMMON ANODEs pack of 20pcs

Specification:-

1. Number of digits: 1
2. Display type: 7 segment
3. Configuration: common anode
4. Number of pins: 10
5. LED color: RED
6. Operating current: 10mA
7. Length of the LED: 19mm
8. Width of the LED: 13mm

5.6v 0.5 watt 1N4734A Zener diodes ±5% voltage tolerance box of 2500

Features:-

• Type: BZX55C5V6 ST
• Nominal Zener Voltage (VZ): 5.6V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 162mA

LM741 Operational amplifier 8 pin IC pack of 2pcs

Specification

1. Operational amplifier
2. Number of pins: 8
3. Supply voltage: 18V
4. Differential input voltage: 15V
5. Differential voltage amplification:  200V/mv
6. Supply current:  1.5mA
7. Short circuit and overload protection
8. Low power consumption

NE555P Precision timer DIP 8 pins IC chip pack of 10pcs

Specification

1. Supply voltage: 5V to 16V
2. Supply current : 3 to 6 mA
3. Output current: 200mA
4. Power dissipation: 600W
5. Accurate time delays and oscillation

L293D Quadruple half-H driver or motor driver 16 pin IC pack of 2pcs

Specification

1. Quadruple high current half-H driver IC
2. Or motor driver IC
3. Supply voltage : 5V to 7V
4. Output voltage : 5V to 36V
5. Max. current : 600mA
6. Number of pin : 16
7. Peak output current : 1.2A

LM3915 Logarithmic LED dot or bar display driver 18 pins IC pack of 10pcs

Specification

1. Analog controlled LED driver IC with logarithmic output
2. Operating Voltage :  3V to 25V
3. Reference Voltage :  1.2V to 12V
4. Power dissipation : 1365 mW
5. Number of pin : 18
6. Number of controllable LED's : 10
7. Drives LEDs, LCDs, or Vacuum Fluorescents

35mm crocodile alligator clip or test clamp pack of 5 pair

Specifications

1. Length of the clip  :  35mm.
2. 100% Brand new and high quality.
3. Easy and quick to connect.
4. Plastic insulation on the top.
5. Attractive design and strong teeth for attachment.
6. Easy flow of current.
7. 10 clips (5 clips of red and 5 clips of black)

LM3915 Logarithmic LED dot or bar display driver 18 pin IC pack of 2pcs

Specification

1. Analog controlled LED driver IC with logarithmic output
2. Operating Voltage :  3V to 25V
3. Reference Voltage :  1.2V to 12V
4. Power dissipation : 1365 mW
5. Number of pin : 18
6. Number of controllable LED's : 10
7. Drives LEDs, LCDs, or Vacuum Fluorescents

KCD1 6A 250V black color 3 pin SPCO small plastic rocker switch pack of 5pcs

Specification

1. 100% Original and best quality product
2. Type  :  single pole, changeover, or triple throw
3. Max. current withstand  :  250V
4. Max. power rating  :  6A
5. It offers on/off switching one at a time
6. High temperature withstand
7. Long life approximately 10,000 clicks
8. High wear and tear properties
9. Durable and excellent design

KCD1-B101 6A 250V AC red color 2 pin SPST small plastic rocker switch pack of 5pcs

Specification

1. 100% Original and best quality product
2. Type  :  single pole, single throw
3. Max. current withstand  :  250V
4. Max. power rating  :  6A
5. High temperature withstand
6. Long life approximately 10,000 clicks
7. High wear and tear properties
8. Durable and excellent design

470 uf 25V Polarized electrolytic capacitors pack of 100pcs

Specifications

1. Type  :  electrolytic
2. Polarity  :  negative and positive terminal
3. Capacitance value  :  470uf
4. Voltage value  :  25V
5. Temp. range  :  40° C to 105° C
6. Offer long life
7. Package include  :  100 pieces

95mm x 40mm Hard plastic build rubber cover black color 6mm rod compatible heavy duty trolley wheel pack of 2pcs

Specification

1. 100% high quality branded toy wheels
2. Tested up to 25Kg of weight
3. Diameter of the wheel : 95mm
4. Width of the wheel : 40mm
5. Compatible to 6mm rod
6. High-quality material build
7. High ground grip for better performance

16 Pin 2.54mm DIP IC Socket Solder Type Adaptors Pack of 5

Applications:

1. In notebook and desktop computers = These sockets features a robust plate for reliable connection to the microprocessor package while limiting PCB bowing during compression.
2. In servers = These IC's offers zero insertion interface to the microprocessor and to the PCB with surface-mount technology soldering.
3. CPU = These IC sockets are designed for higher performance.

CD4017 Decade counter noise immunity DIP 16 pin IC pack of 2pcs

Specifications:-

1. Type : Decade counter IC
2. Supply voltage range : 5V to 15V
3. Power dissipation : 700mW
4. Supports 10 decoded outputs
5. High noise immunity : 0.45
6. Low power : 10 µW
7. Maximum clock frequency :  5.5Mhz

LM358 Dual operational amplifier 8 pin IC pack of 2pcs

Specifications

1. Dual operational amplifier
2. Number of amplifiers: 2
3. Number of pins: 8
4. Wide power supply range
5. Singe supply: 3V to 32V
6. Dual supply: 1.5V to 16V
7. Low supply current – 700uA
8. Short circuit protection outputs

2W10 - 2A 1000V Bridge Rectifier diode pack of 5pcs

Specifications

• Max Surge Current:2A
• Reverse Voltage:1000V
• Forward Voltage VF Max: 1.1V
• Operating Temperature Max: 125°C
• Operating Temperature Min: -55 °C

BT136-600D Transistor TRIAC 600V 4A pack of 5pcs

Specifications

1. Maximum terminal current: 4A
2. On-state gate voltage: 1.4V
3. Gate trigger current: 10mA
4. Max terminal voltage: 600 V
5. Holding current: 2.2mA
6. Latching current: 4mA
7. Package includes: 5 pieces

LM3914 Logarithmic LED dot or bar display driver 18 pin IC pack of 2pcs

Specification

1. Analog controlled LED Driver IC
2. Number of controllable LEDs : 10
3. Operating voltage :  3V to 18V
4. Input analog voltage range : 1.2V to 12V
5. LED sink current :  2mA to 30mA (programmable)
6. Both Dot and Bar display mode available

BD140 General purpose PNP transistor packs of 100pcs

Specification:-

1. Transistor Type  :  PNP transistor
2. Max Collector Current  :  -1.5A
3. Max Collector-Emitter Voltage  :  –80V
4. Max Collector-Base Voltage  :  –80V
5. Max Emitter-Base Voltage  :  –5V

BC558 Bipolar amplifier PNP transistor pack of 20pcs

Specifications:-

1. Transistor type  :  PNP Amplifier Transistor
2. DC Current Gain  :  800
3. Continuous Collector current  :  100mA
4. Peak Collector current  :  200mA
5. Emitter Base Voltage  :  5V
6. Base Current  :  200mA peak

100K ohm ( Ω ) vertical preset variable resistors ( 104 ) pack of 50pcs

Specifications

1. Type: preset variable resistor (trim pot)
2. Resistance value: 100K Ω
3. Max. operating voltage: 50V DC
4. Rotation: single turn
5. Resistance Tolerance: ±30%
6. Rotational cycles: 20 cycles

LM3915 Logarithmic LED dot or bar display driver 18 pins IC pack of 50pcs

Specification

1. Analog controlled LED driver IC with logarithmic output
2. Operating Voltage :  3V to 25V
3. Reference Voltage :  1.2V to 12V
4. Power dissipation : 1365 mW
5. Number of pin : 18
6. Number of controllable LED's : 10
7. Drives LEDs, LCDs, or Vacuum Fluorescents

6 x 6 x 14mm Red color tactile momentary push button switches pack of 200pcs

Specification

1. Type : Through-hole design.
2. Shaft Shape : Square
3. Mode of Operation   :  Tactile momentary
4. Number of pin : 4
5. Power Rating   :  MAX 50mA 24V DC
6. Insulation Resistance   :  100M ohm (Ω)
7. Operating Force  :  2.55±0.69 N
8. Dimensions are given at the image

1000 uf 100V Polarized electrolytic capacitors pack of 100pcs

Specifications

1. Type  :  electrolytic
2. Polarity  :  negative and positive terminal
3. Capacitance value  :  1000uf
4. Voltage value  :  100V
5. Temp. range  :  40° C to 105° C
6. Offer long life
7. Package include  :  100 pieces

Dual USB Output 5V 2.1A Power bank charging modules with digital 7 segment display indicators pack of 50pcs

Specifications:

• Material: Alloy.
• Type: Single screwdriver.
• Handle PVC Molded.
• Total length: 130 mm.
• External rod length: 75 mm.
• Rod thickness: 3 mm.
• Weight: 15 gms.

AN6884 Logarithmic 5 dot LED driver SIP 9 pins IC pack of 50pcs

Specification

1. 5 dot LED bar logarithmic IC
2. Operating voltage range :  5V to 16 V
3. Circuit voltage : 6V
4. Supply current  : 12A
5. Power dissipation :  1100mW
6. Constant current output :  15 mA
7. Inbuilt high gain amplifier: 26 dB
8. Number of pin : 9
9. Low noise immunity

JRC2068D Low noise dual operation amplifier DIP 8 pin IC pack of 2pcs

Specifications

1. Supply voltage:  4V to 18V
2. Differential input voltage range:  30V
3. Power dissipation: 500mW
4. Voltage gain:  90 to 120 dB
5. Max. output voltage:  12V
6. Slew rate:  6V/µs