W5500 Ethernet Network Modules for Arduinos

Specifications

• Type: Drive IC
• 3.3 V or 5 V level.
• LAN Ethernet: 10/100Mbps
• Module test: test software
• W5500 hardware initialization pen

RJ45 High speed Ethernet patch LAN cable 10 meter

Specifications

1. Cable type: Ethernet patch cable
2. Connector type: RJ45
3. Solid core: 568B
4. Wire material: Copper
5. Cable length: 10 meters
6. Supports 10 Gigabit Ethernet
7. Better heat dissipation for PoE application
8. Bare copper conductors

RJ45 High speed Ethernet patch LAN cable 5 meter

Specifications

1. Cable type : Ethernet patch cable
2. Connector type : RJ45
3. Solid core : 568B
4. Wire material : Copper
5. Cable length : 5 meter
6. Supports 10 Gigabit Ethernet
7. Better heat dissipation for PoE application
8. Bare copper conductors

RJ45 Cat6 Ethernet Patch LAN Network Cable (6 Inch, Grey) | Pack of 20

Specification:-

• Cable Type: Ethernet Patch LAN Network Cable
• Category: Cat6
• Connector Type: RJ45
• EIA/TIA TSB-40A ETL Verified
• Cable Length: 6 Inch

RJ45 Cat6 Ethernet Patch LAN Network Cable (6 Inch, Grey) | Pack of 50

Specification:-

• Cable Type: Ethernet Patch LAN Network Cable
• Category: Cat6
• Connector Type: RJ45
• EIA/TIA TSB-40A ETL Verified
• Cable Length: 6 Inch

4000rpm 3V-9V DC high speed mini electric motor

Specification:-

1. Motor diameter  :  2.7mm approx.
2. Motor length  :  50mm approx.
3. Working voltage range  :  3V to 9V
4. Power rating  :  1.2W
5. Rated current  ;  0.6A
6. Keep away from children under 15 years

Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control

Specifications:-

1. Operating Voltage: DC 4.8-6V
2. Offer 3 modes to check servos or ESC
3. Connect to up to 3 servos simultaneously
4. Connect up to 3 ESCs to test and compare their reaction time respectively
5. Built with LED indicators

PWM DC Motor Speed Controller Speed Switch Module 6V/12V/24V/28V 3A 1203B

Specification:-

• Model: 1203B
• Input Voltage: 6V–28V DC
• Output Current: Max 3A continuous
• Control Method: PWM (Pulse Width Modulation)
• Speed Adjustment: Rotary potentiometer (knob)
• Compact & lightweight PCB design

4.5V to 35V DC PWM Speed Controller Mini Electrical Motor Control Switch LED Dimmer Module

Specification:-

1. Operating voltage: DC 4.5V to 35V
2. Control power: 90W (maximum)
3. Quiescent current: 0.015A (standby)
4. PWM duty cycle: 1% -100%
5. PWM frequency: 10khz
6. Size: 29mm*23mm
7. Total height: 15mm

3V Small electric DC toy motor with high speed pack of 2pcs

Specifications:-

• Operating voltage:  3V
• Recommended/Rated voltage:  3V
• Current at no load:  70mA
• No-load speed:  1800 rpm
• Loaded current:  250mA (approx.)
• Rated load:  10g*cm

6 channel DC LED chaser with adjustable speed pack of 1pcs

PRODUCT SPECIFICATIONS:-

• Led chaser circuit with 6 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice project.

10 channel DC LED chaser with adjustable speed

Specifications:-

• Led chaser circuit with 10 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice projects.

LM393 Motor speed measuring groove coupler sensor module

Specification:-

1. Working voltage  :  3.3V to 5V
2. Output  :  digital switch output (0 and 1)
3. Equipped with a fixed bolt hole, easily install.
4. Small board PCB size  :  3.2 cm x 1.4 cm.
5. Use the LM393 wide voltage comparer.

6 channel DC LED chaser with adjustable speed pack of 5pcs

PRODUCT SPECIFICATIONS:-

• Led chaser circuit with 6 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice project.

6 channel DC LED chaser with adjustable speed pack of 10pcs

PRODUCT SPECIFICATIONS:

• Led chaser circuit with 6 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice project.

4 channel DC LED chaser with adjustable speed pack of 1pcs

Specifications:-

1. Led chaser circuit with 4 led outputs.
2. Variable frequency.
3. Best for making electronic projects.
4. Ideal for making led dice projects.

12V Electric adjustment switch regulator PWM motor controller switch

Specifications:-

1. Input supply voltage: DC 12V to 40V
2. The maximum output power: is 400W
3. The maximum continuous output current: 8A
4. Static current: 0.02 A (Standby)
5. PWM frequency: 13kHz
6. Duty cycle adjustable: 10% to 100%

12V DC 6 pin 3 Way On/Off/On SPCO Rocker Reverse and Forward motor controller switch

Specification:-

1. 100% Original and best quality product
2. Max. current withstand  :  250V
3. Max. power rating  :  6A
4. High temperature withstand
5. Long life approximately 10,000 clicks
6. High wear and tear properties
7. Durable and excellent design

100K potentiometer with 3 pin XH JST male connector for Volume control, Motor speed control

Specifications:-

• Material:- Metal, Plastic
• Resistance Value:- 100K
• Adjustment Type:- Top Adjustment
• Rotary Knob Shaft Length:- 13mm
• Main used to control electrical device such as volume controls on audio equipment

1N914 100V ,DO-34/DO-35 High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 75mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 250mW
• Package : DO-34/DO-35

1N4148 100V ,DO-34/DO-35 High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 150mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 500mW
• Package : DO-34/DO-35

1N4448 100V ,DO-34/DO-35 High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 150mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 500mW
• Package : DO-34/DO-35

LL914 100V ,MINI MELF High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 75mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 250mW
• Package : MINI MELF

LL4148 100V ,MINI MELF High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 150mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 500mW
• Package : MINI MELF

LL4448 100V ,MINI MELF High Speed Switching Diodes Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 150mA
• Maximum reverse recovery time : 4.0ns 
• Power dissipation : 500mW
• Package : MINI MELF

Diy mini Motor speed controller kit ( Battery Holder, Push Connector, Motor, 3Blade Propeller, Cell’s, Motor speed controller) with User Manual and Video Tutorial

Specification

• 100% Best quality and Branded Products
• Diy mini Motor speed controller kit
• The kits are easy to assemble and come with a build guide
• Very easy to make and the parts are easy to find
• Excellent choice for a starter pack

DC Motor, High Speed Shaft Centre Electric Gearbox Motor 2-Wire Connecting

Specifications:-

• High speed gearbox motor.
• Operating voltage : 3V To 5V.
  
• Stable and reliable performance.
• Good quality and Suitable to use.
• Excellent quality and long service life
• These are simple DC motors featuring. 

3 channel DC LED chaser with adjustable speed Pack of 1pcs

Specification:-

• High quality
• LED chaser circuit with 3 LED outputs
• 100k Persist for adjust speed and time
• Package include :- 1pcs 3 channel LED chaser
• Best for making electronic projects.

10K potentiometer with 3 pin XH JST male connector for Volume control, Motor speed control

Specifications

• Material: metal, plastic
• Resistance value: 10k ohm
• Adjustment type: top adjustment 
• Knurled shaft: total rotational angle: 300C
• Terminal number : 3 shaft diameter: 6mm
• Rotary knob shaft length: 13mm
• Main used to control electrical devise such as volume controls on audio equipment

PWM DC Motor Speed Controller 12V-40V 10A Module

Specification:-

• Input supply voltage:- DC 12V-40V
• The maximum continuous output current:- 8A
• The maximum output power:- 400W
• PWM frequency:- 13kHz

• Material:- Plastic, metal

12V DC Micro Low Speed Small Gear Motor with Shaft

Specification:-

• Voltage : 12 Volts
• Material : Metal
• Type : Gear Motor
• Construction : Permanent Magnet
• Color : silver  ‎

12V DC Copper Motor Multipurpose Brushed for DIY applications

Specifications:-

• Operating Voltage: 12V
• Maximum Current: 2A
• High Torque Rated Voltage Current-DC 12V
• 100% Brand New and High Quality
• Color as show on picture. 

3V DC Motor High Speed for Toy Car DIY Motors

Specifications : - 

• Small in size.
• Voltage range: DC 3V 
• Durable and not easy to damage.
• For toy car DIY.
• Metal case body for protection

Mini Electric Motor 5000 to 10000 RPM High Speed Miniature DC Motors 3Vto 6V for Toy Cars pack of 5

Specification:-

• Rated Voltage: 3V 
• Item Type: Mini Electric Moto
• DC motor has strong power
• high efficiency
• large torsion
• high speed
• low noise and long life.

DC 3V 5200RPM High-Speed Micro Mini Vibration Motor

Specifications:-

• Speed: 5200 RPM
• Voltage: 3 Volts
• Material: Metal, Plastic
• Good quality and Suitable to use.
•  Micro Vibration Motor
• Light Weight Motor

6V DC Motor Micro High Speed 360-ST Motor for DIY toy

Specifications:-

• Material: Metal, Copper
• Speed: 3000 RPM
• Voltage: 6 volts
• Excellent working mechanism
• Metal case body for protection
• Produce electricity by converting rotary motion into electric current

4000W 220V PWM High-Power Dimming Speed Regulator

Specifications :-

• Input Voltage: 220V AC.
• Maximum Power: 4000W.
• Adjustable Voltage: 0-220V AC.
• AC frequency: 50-60Hz.

14V 2AMP AC-DC Adaptor Power Supply for DC fan high speed charger

Specification:-

• Input voltage : 90V to 270V AC
• Output voltage : 14V
• Power rating : 2A
• Max. frequency range : 50 to 60 Hz
• Over-current, overload and short circuit protectiona
• High-quality adapter with the latest and advanced technology

DIY Robot Smart Car Kit with Speed Encoder, 2 Wheels and Battery Holder

Specification:-

• Material: Plastic
• This car is the tachometer encoder.
• It can be used for distance measurement, velocity.
• With a 4 AA battery holder
• The motor power supply is 3V ~ 6V

DIY Ultra Robot Smart Car Kit with 4 Speed Encoder, 4 Wheels and 4 AA Cell Battery Holder

Specification:-

• Material: Plastic
• This car is the tachometer encoder.
• It can be used for distance measurement, velocity.
• With a 4 AA battery holder
• The motor power supply is 3V ~ 6V

6V 12V 24V 28V 3A 80W 1203BB DC Motor Speed Controller PWM Reversible Motor Driver Switch

Specification:-

• Voltage: DC 6-28 V.
• Wattage: 80W
• Power and Plug Description: Power Source
• Current: 3A
• Potentiometer with switch function
• DC motor speed controller is connected to DC power supply

25CM USB 90 Degree Cable Type A Male to Female High Speed Connection

Specification

• High performance
• Product Type: USB 2.0 Extension Cable
• Connector Type : Male-to-Female
• Color : Black
• Compatible Devices : Laptop, Scanner, Personal
• Size: 25 cm (approx)

5V Mini Cylindrical Shape Small Shaft High Speed DC Motor

Specification:-

• Diameter  :  33mm
• Shaft diameter  :  2mm
• Shaft length  :  9mm
• Working voltage  :  5V
• Speed : 9200 RPM

47K potentiometer with 3 pin XH JST male connector for Volume control, Motor speed control

Specifications:-

• Material:- Metal, Plastic
• Resistance Value:- 47K
• Adjustment Type:- Top Adjustment
• Rotary Knob Shaft Length:- 8mm
• Main used to control electrical device such as volume controls on audio equipment

3V 900RPM DC Gear Motor, Slow Speed 4mm Small Shaft Centre Electric Gearbox Motor 2-Wire Connecting

Specifications:-

• Speed: 900 RPM
• Voltage:3 Volts
• Product diameter: 40mm
• Shaft diameter: 4mm

L298N 1.5A 2V DC Motor Drive Controller Board PWM Speed H-Bridge Stepper Module

Specification

• Module supply voltage: DC 2V-10V
• Signal input voltage: DC 1.8-7V
• Single working current: 1.5A
• Peak current up to 2.5A
• Low standby current (less than 0.1uA)

Mini Electric Motor 16400 RPM High Speed Miniature DC Motors 1.5Vto 4.5V for Toy Cars Pack of 5

Specification:-

• Voltage: 1.5-4.5VDC
• No load RPM: 16400 rpm (Estimated)
• NO load current: 90mA
• Stall Current: 2.9A (3VDC)
• Frame: size130
• Shaft Length: 38mm
• Shaft dia: 2 mm

4V Mini Electric Motor 3000 RPM High Speed DC Motor for Toy Cars

Specification:-

• Rated Voltage: 4V 
• Item Type: Mini Electric Moto
• DC motor has strong power
• high efficiency
• large torsion
• high speed
• low noise and long life.

TYPE-C USB Charging 2-Step Light and Motor Dimming Controller Module

Specification

• Input charging: 5V current limiting 1A
• Button height: 6mm
• C-TYPE USB Charging
• Product size: 35mm x 28mm
• Aperture diameter: approximately 2.5mm
• 2 step dimming mode Function
• Battery Charging Indicator 
• Light and Motor Output Connection

3-12v Dc Small Electric High Speed Motor for DIY Toy

Specifications:-

• Material: Metal, Copper
• Speed: 3000 RPM
• Voltage: 12 volts
• High quality motor
• Excellent working mechanism
• Metal case body for protection

3 channel DC LED chaser with adjustable speed (40mm x 30mm)

Specification:-

• Led chaser circuit with 3 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice projects.

4 channel DC LED chaser with adjustable speed (41mm x 28mm)

Specification:-

• Led chaser circuit with 4 LED outputs
• Variable frequency.
• Best for making electronic projects.
• Ideal for making LED dice projects.

6 channel DC LED chaser with adjustable speed (39mm x 33mm)

Specification:-

• Led chaser circuit with 6 led outputs.
• Variable frequency.
• Best for making electronic projects.
• Ideal for making led dice projects.

Multi channel DC LED chaser with adjustable speed (53mm x 35mm)

Specification :-

• It is 10-channel circuit
• LED chaser circuit with multi-led outputs
• Variable frequency.
• Best for making electronic projects.
• Ideal for making LED dice projects.
• It has 2 Channel, 3 Channel, 4 Channel, 5 Channel , 6 Channel,  7 Channel, 8 Channel, 9 Channel, and a 10-channel LED Chaser pad

304K/ZL Peristaltic Pump 6000RPM 24V High Speed DC Motor

Specification:-

• Voltage: 24V/2A
• Motor Speed: 6000 rpm
• Motor Type: 775 DC Motor
• Power Source: Corded Electric
• low-noise and long-life
• 304K can load with 3 kinds of motor:  DC Geared Motor, DC Planetary Gear Motor, Stepper Motor and Brushless Motor

Combo of DF50S12M Brushless 12V 0.10A Air Blower Fan With Speed Controller

Specification:-

• Model: DF50S12M DC Motor Speed Regulator
• Speed of 4500 RPM
• Low-Noise Operation
• High-Speed Performance

Combo of 12V 555 DC Motor | Drill Chuck Kit | 12V 2 Amp Adapter | DC Female Jack

Specification:-

• Operating voltage: 9V to 12V
• No-load speed: 10000 RPM
• Motor shaft diameter: 6 mm
• 7 pcs of Electric drill chuck set
• Anti-rust and anti-corrosion properties

Package includes: 12V DC RS-555 Motor, Drill Chuck Kit, 12V 2 Ampere Adaptor, and DC Female Jack. 

Combo of Motor PWM Speed Controller with Adjustable Switch | Screwdriver | 2m Copper Wire

Specification:- 

• Voltage: 35 Volts
• PWM Frequency: 20khz
• Current Range: Within 5A
• PWM duty cycle: 1% -100%
• Adjustable Speed Range: 0~100%
• 1.5mm flat-tip stainless steel liner screwdriver

Package Includes: 1 x DC Motor Speed Control Switch 1 x Screwdriver 2 mtr Copper Electrical Wire

PMLL4148L 100V MINI MELF High Speed Switching Diodes Pack of 5

Specification:-

• Package: SOD80C
• Mounting Type: SMD
• Part Number: PMLL4148L
• Max. forward voltage: 1V
• Max. forward impulse current: 4A
• Load current: 0.2A
• Max. load current: 0.45A
• Power dissipation: 0.5W

PMLL4148L 100V MINI MELF High Speed Switching Diodes Pack of 50

Specification:-

• Package: SOD80C
• Mounting Type: SMD
• Part Number: PMLL4148L
• Max. forward voltage: 1V
• Max. forward impulse current: 4A
• Load current: 0.2A
• Max. load current: 0.45A
• Power dissipation: 0.5W

PMLL4148L 100V MINI MELF High Speed Switching Diodes Pack of 2500

Specification:-

• Package: SOD80C
• Mounting Type: SMD
• Part Number: PMLL4148L
• Max. forward voltage: 1V
• Max. forward impulse current: 4A
• Load current: 0.2A
• Max. load current: 0.45A
• Power dissipation: 0.5W

Combo of SG90 Hard Plastic Gear Servo Motor & Multi Servo Tester Speed Control

Specification:-

• Digital Multi Servo Tester 
• Connect to up to 3 servos simultaneously
• SG90 Small digital servo motor
• Operating voltage:  3V to 7.2V
• Recommended voltage: 5V
• Stall torque : 1.2 kg/cm (4.8V)
• Max stall torque : 1.6 kg/cm (6V)
• The operating speed is 0.1s/60° (4.8V)

Combo of 3.7V 716 Coreless DC Motors with Propellers for Mini Drones (8 Motors + 8 Blades)

Specifications:-

• Voltage: DC 3.7V
• Current: 0.8A
• Speed: 48000 RPM
• Motor length: 16mm
• Propeller length: 45mm

Package Include: 8 x Motor, 8 x Propeller (2xCW and 2xCCW)

15V 360mA Power Supply DC Mi Trimmer Charger Adapter

Specification:-

• Input voltage: 100V to 240V AC
• Output Voltage: 15V
• Max. frequency range: 50 to 60 Hz
• Connector type: 2 pin
• Compatible Devices: Mi Trimmer
• Over-current, overload and short-circuit protection
• High-quality adapter with the latest and advanced technology

AC 220V 2000W High-Power Electric Voltage Regulator Motor Speed Controller

Specification:-

• Type: Integrated circuit module
• Input voltage: 220V.
• Maximum power: 2000W.
• Adjustable voltage: 50–220V AC
• Material: plastic, metal.
• Size: 4.8cm x 5.5cm x 2.7cm.

12V 8000 RPM High Speed Brushed DC Motor For RC Toys

Specifications:-

• Type: DC Motors
• Supply Voltage: DC 12V
• Speed: 8000 RPM
• Material: Stainless Steel Metal
• Compact and Lightweight

30mm x 11mm Hard Plastic Build Rubber Cover Wheels for RC Toys Cars with Shaft (Multicolor)

Specification:-

• 100% high-quality branded toy wheels
• Diameter of the revolution: 30mm
• Color: Multicolor
• Shaft Diameter: 2mm
• Perfect for DIY Toy
• High-quality material build
• The material of Wheel: High-strength plastic
• The material of Wheel: Rubber

FK-260SA-09450 2mm Shaft 12V DC High Speed Electric Shaver Toy Motor

Specification:-

• Voltage Range (VDC): 12-24
• No Load Speed (RPM): 5800
• Rated Speed (RPM): 4630
• Made of good material
• Output shaft diameter: 2.0mm
• Motor size: 27mm x 18mm x 24mm

SC4582G A10K 73mm Dual Channel Linear Slide Potentiometer Pack of 5

Specification:-

• Potentiometer type : slide
• Maximum resistance : 10KΩ
• Total length of the pot : 73mm
• Travel length : 58mm
• Power rating : 0.5W
• Element material : carbon
• Actuator type : Lever
• Tolerance : 20%

Combo of L293D Motor Driver and BO Motor with Rubber Wheels & Jumper wire for DIY Smart Car Kit

Specifications:-

• Motor Type: BO Motor
• Wheel Type: BO Wheel
• Motor Driver: L293D
• L293D 4-Channel DC Motor Driver
• Ideal For: Robotics, DIY Projects
• Ease of Use: Easy to assemble and use

Package Included: 1pcs L293D Motor Driver Shield, 4pcs DC Motors, 4pcs Wheels, Jumper wire (Male To Male, Female To Female, Male To Female)-(20pcs Each)

Mini Portable Humidifier Air Conditioner Spray Cooling Fan With 3 Speed Mode

Specification:-

• Input: 5V - 2.0A
• Power: 10W
• Power Source: Electric
• Interface Type: USB Type-C
• Controls Type: Button
• Color: black

Simonk-30A BLDC ESC Electronic Speed Controller with Deans Connector

Specification:-

• Model: SIMONK 30A.
• Constant Current: 30A (Max 40A < 10 sec).
• BEC: 5V 2A.
• Suitable Batteries: 2-3S LiPo.
• Application: BLDC Motors, Multirotor, RC Planes etc.

DC 9-60V 20A PWM DC Motor Speed Controller

Specification:-

• Working voltage: 9-60V
• Voltage: 220 Volts (AC)
• Max current: 20A
• Continuous current: 18A
• Power Source: DC
• Speed control mode: Potentiometer.

1.8V to 12V 2A DC PWM Speed Controller Mini Electrical Motor Control Switch

Specification:-

• Input supply voltage: 1.8V- 15V DC
• The maximum output power: 30W
• Output current : 2A(Max)
• Size: 32mm x 32mm
• Potentiometer with switch function for PWM adjustment

74LS139 High Speed Dual 1-of-4 Decoder/De-Multiplexer SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 34mW
• Supply Voltage: 7V
• Input Voltage: 7V
• Operating Free Air Temperature Range: 0°C to +70°C
• Storage Temperature Range: −65°C to +150°C

AM26LV32 Low-Voltage High-Speed Quadruple Differential Line Receiver SMD IC

Specification:-

• Mounting: SMD
• Number of: 16 Pins
• Input Hysteresis: 50 mV Typical
• Operates From Single 3.3-V Supply
• Ultra-Low Power Dissipation: 27 mW Typical
• Switching Rates Up to 32 MHz
• 235 mW With Four Receivers at 32 MHz

AM26LV31 Low-Voltage High-Speed Quadruple Differential Line Driver SMD IC

Specification:-

• Mounting: SMD
• Number of: 16 Pins
• Switching Rates up to 32 MHz
• Operate From a Single 3.3-V Supply
• Propagation Delay Time: 8 ns Typical
• Pulse Skew Time: 500 ps Typical
• High Output-Drive Current: ±30 mA
• Controlled Rise and Fall Times: 3 ns Typical
• Differential Output Voltage With 100-Ω

TC4420 6A High-Speed MOSFET Driver IC

Specification:-

• Supply Voltage: +20V
• Input Voltage: – 5V to VDD + 0.3V
• Input Current (VIN > VDD): 50 mA
• High Capacitive Load Drive Capability: 10,000 pF
• Wide Input Supply Voltage Operating Range: – 4.5V to 18V
• Package Power Dissipation 5-Pin TO-220 (With Heatsink): 12.5W
• Output Voltage Swing to Within 25 mV of Ground or VDD
• Thermal Impedances (To Case) 5-Pin TO-220: 10°C/W

MC33078 Dual High Speed Low Noise Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply voltage (VCC+): 18 V
• Supply voltage (VCC-): -18 V
• Input current: ±10 m A
• Supply voltage (VCC+ to VCC-): 36 V
• Low Noise Voltage 4.5 nV/√Hz
• Large Output-Voltage Swing 14.1 V to
• Storage temperature range: –65°C to150 °C

MC34152P MC34152 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: −0.3 to VCC V
• Gate Drive Output-Source Current: 1.5 A
• Maximum Power Dissipation = 50°C: 0.56 W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to +70 °C
• Storage Temperature Range: -65 to +150 °C

MC34151 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: −0.3 to VCC V
• Gate Drive Output-Source Current: 1.5 A
• Maximum Power Dissipation = 50°C: 0.56 W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to +70 °C
• Storage Temperature Range: -65 to +150 °C
• Two Independent Channels with 1.5 A Totem Pole Output

MC33151 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: VEE −0.3 to VCC V
• Totem Pole Sink or Source Current: 1.5 A
• Maximum Power Dissipation  = 50°C: 0.56 W
• Maximum Power Dissipation = 50°C: 1W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to 70 °C
• Storage Temperature Range: -65 to +150 °C

Combo of DC Motor Speed Controller & DC Motor Speed Controller Speed Switch Module

Specification:-

• Voltage: DC 6-28 V.
• Wattage: 80W
• For Speed Control Of all Types of DC Brush Motors
• Current: 3A
• PWM Technology: Ensures smooth and efficient motor speed regulation.
• Adjustable Speed Control: Provides precise control over the motor speed with easy-to-use adjustment mechanisms.

4.5V to 35V DC PWM Speed Controller | Electrical Motor Control Switch LED Dimmer Module Pack of 5

Specification:-

• Operating voltage: DC 4.5V to 35V
• Control power: 90W (maximum)
• Quiescent current: 0.015A (standby)
• PWM duty cycle: 1% -100%
• PWM frequency: 10khz
• Size: 29mm*23mm
• Total height: 15mm

12V Electric Motor Gear Box for Kids Ride-On Cars | 17000RPM High Speed Replacement Motor | Wear Resistant Gearbox for Toy Vehicles

Specification:-

• Voltage: 12V
• Speed: 17000RPM
• Motor Type: DC Gear Motor
• Material: High Quality Durable Material
• Gear Type: Reduction Gearbox

Mini USB Rechargeable Handheld Fan | Multicolour 3 Speed, Portable Cooling Fan

Specifications :-

• function : 3 Speed
• Battery Voltage:3.7
• Output Power : 1.5W
• Input Current : 0.3-0.5A
• Output Voltage: 3-4.5V
• charging Time:2-4h
• Product Weight : 103g
• Interface Type : Type C
• Product Size : 7.5L x 7.5W x 15.5H CM

Note :- This is a multi color product.The color of the item delivered will depend on stock availability.

Mini Portable Handheld Fan USB Rechargeable | Multi color, 3 Speed Modes for Travel & Outdoor Use

Specifications:-

• Input Voltage : 5 V
• Input Current : 1 A
• Output Voltage : 5-9 V
• Output Power : 5 W
• Battery : 14500-3.7 V
• Charging Method: USB Charging
• Control Type: One-Button Operation
• Design: Handheld & Portable

DT-315 3 in 1 Modular connector crimping tool for ethernet network cable connector

Specification

1. 3 in 1 modular connector crimping tool
2. Ethernet cable sizes: 8 pins, 6-pin, and 4 pin
3. Press pliers with sharp blades for cutting the wires
4. Hard plastic insulated handles
5. Separate wire stripper
6. Portable design with perfect shape

NSHL468 RJ45+RJ11 and RJ11+RJ45 LAN ethernet network cable tester master and remote

Specification

1. LAN ethernet network cable tester
2. 2 Modular female connector holes of size 6 pin and 8 pin
3. Easily detachable master and remote
4. Powered by 9V battery
5. Easy indication with green indicator LED light
6. Simple ON/OFF switch

Combo of Crimping Tool with Modular Connectors | 25 Cable Connector | NSHL468 LAN Cable Tester

Specification for DT-315 3 in 1 Modular connector crimping tool:-

1. 3 in 1 modular connector crimping tool
2. Ethernet cable sizes : 8 pins, 6 pin, and 4 pin
3. Press pliers with sharp blades for cutting the wires
4. Hard plastic insulated handles

Specification for NSHL468 LAN ethernet network cable tester:-

1. LAN ethernet network cable tester
2. 2 Modular female connector holes of size 6 pin and 8 pin
3. Easily detachable master and remote
4. Powered by 9V battery

RJ45 Cat6/Cat5e/cat5 Ethernet Connector pack of 5pcs

Specification:

1. cable length: 0.25 to 0.75 cm
2. Cable type: Ethernet
3. Color: Crystal with a gold plating
4. Connectivity technology: RJ45
5. connection transfer rate: 1000 MBps
6. Gauge: 24

Punch Down Tool for Cat6 Cat5 Rj45 Rj11 Telephone Junction Box Impact Cut Tool Terminal Insertion Tools

Specification:-

• Higher-performance crimp tool
• Made of carbon steel
• Easy to Handle
• High-quality IDC block punch-down tool
• A good tool for bt sockets.

RJ45 Connector with Red Boots Cover for Ethernet Network Cable (5 pcs each)

Specification:-

• Type: Wireless
• Material: Silicone
• Color: Red
• Cable Type: Ethernet
• High quality
• Waterproof
• Connectivity technology: RJ45
• Suitable For RJ45 LAN CABLE
• Temperature range : -40°C ~ 70°C

RJ45 Connector with Black Boots Cover for Ethernet Network Cable (5 pcs each)

Specification:-

• Type: Wireless
• Material: Silicone
• Color: Black
• Cable Type: Ethernet
• High quality
• Waterproof
• Connectivity technology: RJ45
• Suitable For RJ45 LAN CABLE
• Temperature range : -40°C ~ 70°C

RJ45 Connector with Yellow Boots Cover for Ethernet Network Cable (5 pcs each)

Specification:-

• Type: Wireless
• Material: Silicone
• Color: Yellow 
• Cable Type: Ethernet
• High quality
• Waterproof
• Connectivity technology: RJ45
• Suitable For RJ45 LAN CABLE
• Temperature range : -40°C ~ 70°C

RJ45 Connector with Blue Boots Cover for Ethernet Network Cable (5 pcs each)

Specification:-

• Type: Wireless
• Material: Silicone
• Color: Blue 
• Cable Type: Ethernet
• High quality
• Waterproof
• Connectivity technology: RJ45
• Suitable For RJ45 LAN CABLE
• Temperature range : -40°C ~ 70°C

RJ45 Cat6 Ethernet Patch LAN Network Cable (1M, Grey)

Specification:-

• Cable Type: Ethernet Patch LAN Network Cable
• Category: Cat6
• Connector Type: RJ45
• EIA/TIA TSB-40A ETL Verified
• Solid core 568B
• Cable Length: 1 Meter

RJ45 Cat6 Ethernet Patch LAN Network Cable (2M, Grey)

Specification:-

• Cable Type: Ethernet Patch LAN Network Cable
• Category: Cat6
• Connector Type: RJ45
• EIA/TIA TSB-40A ETL Verified
• Solid core 568B
• Cable Length: 2 Meter