12V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 1 channel relay module compatible with 5V microcontroller

Specification:-

1. Number of channels: 1
2. Supply voltage: 3.75V to 6V
3. Quiescent current: 2mA
4. Trigger voltage: 5V
5. Trigger current: 20mA
6. Current when the relay is active: 70mA
7. Relay maximum contact voltage: 250V AC or 30V DC
8. Relay maximum current:  10A

12V 2 channel relay module with light coupling

Specification:-

1. Number of channels : 2
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

GD4142 Dual USB 5V 1A DC to DC step up booster power bank charging module pack of 1pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on the back
6. Intelligent automatic shutdown

5V 1 channel Low level solid state relay module 240V 2A output with resistive fuse

Specification:-

1. Operating voltage : 3V to 5V
2. Trigger voltage : 5V
3. Supply current : 2mA
4. Switching voltage range : 240V at 2A
5. Operating current : 12.5mA

5V 2 channel Low level solid state relay module 240V 2A output with resistive fuse

Specification:-

1. Operating voltage : 3V to 5V
2. Trigger voltage : 5V
3. Supply current : 2mA
4. Switching voltage range : 240V at 2A
5. Operating current : 16mA
6. 2 channel 2 AMP Solid State Relay board
7. Control 2 loads of up to 2 amps each at 100V or 240V AC

5V 4 channel Low level solid state relay module 240V 2A output with resistive fuse

Specification:-

1. Operating voltage : 3V to 5V
2. Trigger voltage : 5V
3. Supply current : 2mA
4. Switching voltage range : 240V at 2A
5. Operating current : 12.5mA
6. 4 channel 2 AMP Solid State Relay board

5V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 2 channel relay module with light coupling

Specification:-

1. Number of channels : 2
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 4 channel relay module with light coupling

Specification:-

1. Number of channels : 4
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 6 channel relay module with light coupling

Specification:-

1. Number of channels : 6
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

5V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 4 channel relay module with light coupling

Specification:-

1. Number of channels : 4
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 8
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 16 channel relay module with light coupling and LM2576 power supply

Specification:-

1. Number of channel : 16
2. Operating voltage : 12V
3. Trigger voltage : 12V
4. Switching voltage : 250V at 10A
5. 12V relay with AC contact capacity of 10A 250V and optocoupler protection
6. The onboard power supply module

24V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 24V
3. Max. current : 30mA
4. Trigger voltage : 24V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

24V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 8
2. Operating voltage : 24V
3. Max. current : 30mA
4. Trigger voltage : 24V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

24V 4 channel relay module with light coupling

Specification:-

1. Number of channels: 4
2. Operating voltage: 24V
3. Max. current: 30mA
4. Trigger voltage: 24V
5. Switching voltage: 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V 4 Channel relay module programmable with opto isolated RS485 STM8S103F3

Specification:-

1. Number of channels : 4
2. Operating voltage : 12V
3. Max. current : 20mA
4. 4 Optocoupler isolation
5. 4 relay closed LED indicating lamp
6. 4 input connections
7. RS485 communication connection
8. STM8S103F3 programmable microcontroller

Made in India 5 Volt Single channel isolated relay module

Specification:-

1. Made in India
2. Number of channels : 1
3. Supply voltage : 5 Volts
4. Current when the relay is active : 7A
5. Relay maximum contact voltage : 250V AC or 28V DC
6. Relay Maximum current :  10A

DC 6V to 30V 1 Channel Delay power relay module with Adjustable timing cycle

Specification:-

1. Number of channels : 1
2. Operating voltage : 6V to 30V DC
3. Max. current : 50mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Optocoupler Isolation

ESP8266 5V 1 Channel relay module IOT smart home remote control switch

Specifications:-

1. Transmission Distance (m) : 40m
2. Trigger voltage: 5V DC
3. Switching voltage: 250V @ 10A
4. Switching voltage: 30V @ 10A
5. Relay voltage : 5V (10A/250V AC, 10A/30V DC)
6. Baud rate: 9600

12V DC 250V AC 16A 6 Terminal NO HF115F-I/012-1HS3A Switching current PCB panel mount power relay pack of 1pcs

Specifications

1. Rated voltage : 250V AC
2. Max. switching voltage : 400V AC
3. Rated current : 16A
4. Limiting continuous current : 12A
5. Operate/release time max. : 8/6ms

SSR-25DA 3V-32V DC to 24V-380V AC 25A Solid state relay module pack of 1pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 380V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

SSR-25DA 3V-32V DC to 24V-380V AC 25A Solid state relay module pack of 5pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 380V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

SSR-25DA 3V-32V DC to 24V-380V AC 25A Solid state relay modules pack of 10pcs

Specifications

1. Load current rate : 25A
2. Trigger voltage : 3V to 32V
3. Switching voltage : 24V to 380V AC at 25A
4. Type : DC to AC single phase
5. Maximum offset time : 10ms

Single Channel 5V Relay Module low level trigger

Specification

1. Number of channels : 1
2. Operating voltage : 5V
3. Trigger voltage : 10V
4. Switching voltage : 250V at 10A
5. Equipped with high-current relay
6. It can control both AC and DC appliances such as Motors, lights, fans, etc.

12V DC 100 Watt Inverter Circuit Board with Relay and Buzzer (110mm x 60mm x 2mm)

Specification

• Input voltage: 12V DC
• Power rating: 100 Watt
• Frequency : 50HZ/60HZ
• Inbuilt over voltage, over current, and short circuit protection
• Simple and easy-to-use design
• Fast transient response
• Dimension: 110 x 60 x 2 mm
• It's capable of operating CFL bulbs, LED bulbs, bulb, Light Charger, etc.
• It's not capable of electromagnetic transformer devices

RF Transmitter 433 Mhz Remote Controls with Wireless Remote Control Switch DC 12V

Specifications:-

• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes, and off.
• 3 mode function : Momentary, Toggle, Latching Mode have inside

DC 12V RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

15A 125/250V 50/60Hz DC Automatic Reset Relay Fuse Current Overload Protector

Specifications:-

• Current Rating: 15A
• Voltage: 12V
• High-Amperage Compatibility
• Reliable Relay Fuse Design
• Simple Installation

DC 12V NE555 Timer Switch Adjustable Disconnect Delay Relay Module

Specification:-

• Module based on the NE555 chip.
• Input voltage: DC 12V
• Adjustable time: 0–10 s
• AC Control voltage: 250V/max. 10A
• DC Control Voltage: 30V/max. 10A
• Max. load: 2200W

Combo of 37 in 1 Ultimate Sensor Kit for Arduino

Specification:-

• 10K resistor Rotary encoder module
• Hall effect detection sensor (easily available)
• Joystick sensor Input voltage range: 3.3V to 5V
• Suitable for Arduino, AVR, and PIC microcontroller projects
• The sensor module kit is perfect for various DIY projects and robotics science projects
• The Arduino sensor kit can be used by both beginners and professionals.
• This is a great sensor kit for getting started with microcontrollers and sensors.

Package includes:- Joystick module, Relay module, Big sound, Small sound, Tracking, Avoid, Flame, Linear hall, Touch, Digital temp, Buzzer, Passive buzzer, RGB led, SMD led, Two color, Two color, Reed switch, Mini reed, Heartbeat, 7-color flash, Laser emit, Button, Shock, Rotary encoders, Light cup, Tilt switch, Ball switch, Photoresistor, Temp and humidlty, Analog hall, Hall magnetic, TEMP 18B20, Analog temp, TR emission, IR receiver, Tap module, and Light blocking Sensors. 

Combo of Timer Relay Module (6V–30V DC) with Adjustable Delay | 6 RPM 220V AC Swing Motor

Specification:-

• Operation Mode: Automatic
• Contact Current Rating: 10 Amps
• 220-240V Swing Motor Gear Motor
• 1 Channel Delay power relay module
• Clear LED display, easy to check the value

DC 12V 1 Channel RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Voltage: DC12V
• Current Rating: 10 Amps
• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

10A 125/250V 50/60Hz DC Automatic Reset Relay Fuse Current Overload Protector

Specifications:-

• Current Rating: 10A
• Voltage: 12V
• High-Amperage Compatibility
• Reliable Relay Fuse Design
• Simple Installation

5V 30A 1-Channel Relay Module

Specification:-

• Relay Type: Single channel
• Operating Voltage: 5V DC
• Current Rating: 30 Amps
• Current Capacity: 30A at 250V AC or 30V DC

Pinouts:

• DC+: DC power supply positive pole
• DC-: DC power supply negative pole
• IN: signal triggering pin
• JD+: relay control voltage positive
• JD-: relay control voltage negative

100 Watt Mother Board/PCB of Inverter with Relay Module

Specification:-

• Power Rating: 100 Watts
• Power Source: DC
• Input Voltage: 12V DC (typical)
• Relay: High-current relay for reliable switching
• Dimensions: 105mm x 93mm (approx)

DC 12V Dual Channel Transmitter RF Relay Module with Remote Controller

Specification:-

• Channels: 2
• Voltage: DC12V
• Current Rating: 10 Amps
• Working frequency: 433MHz/315MHz
• Working temperature: -30°c+70°c
• Material: Plastic + Metal

5V 1 Channel Relay Module with High & Low Trigger Option

Specification:-

• Number of channels: 1
• Supply voltage: 3.75V to 5V
• Quiescent current: 2mA
• Trigger voltage: 5V
• Trigger current: 20mA
• Current when the relay is active: 70mA
• Relay maximum contact voltage: 250V AC or 30V DC
• Relay maximum current:  10A
• Product size: 50 x 25mm

DC 12V 2 Channel Transmitter RF Relay Module with Wireless Remote Control Switch

Specification:-

• Voltage: DC12V
• Channels: 2
• Current Rating: 10 Amps
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Control Lights, Motors, Fans, electrically operated.
• Push the remote button, LED flashes on and off.

DIY Combo Kit for Automatic Hand Sanitizer Dispenser | Includes IR Sensor | Relay | Water Pump

Specification:-

• Type: male to male
• 5V 1-channel relay module 
• IR Proximity Sensor
• 2.5mm x 100mm Black cable tie 
• 6V to 12V DC Mini underwater pump

Package Included:- 2 pcs Cable tie, 20 pcs Jumper Wire, 1 pcs Relay Module, 1 pcs IR Sensor, 1 pcs Underwater pump, 2 meter Pipe

Combo of Rain Detect Sensor for School Project with Jumper Wire|Water Pump & 5V Relay Module (43 Item)

Specification:-

• Working voltage: 6V to 12V
• Power current: 1.9A
• Max. flow : 50 liter/hour
• Distribution bit to adjust sensitivity
• 5V Relay Module – Enables seamless control of electrical devices based on sensor input.

Package Included:- 1 pcs 5V Relay Module, 1 pcs water pump, 1 pcs Rain detect Sensor, 40 pcs Female to Female Jumpere wire

Combo of LM393 LDR Sensor with 12V 2- Channel Relay Module & 40 Pcs Jumer wire (47 Item)

Specification:-

• Number of channels : 2
• Operating voltage : 12V
• Max. current : 20mA
• 40 Jumper Wires – Provides the necessary connections for easy circuit assembly.
• LM393 LDR Sensor – Detects light levels and triggers responses based on light intensity.

Package Included:- 2 Pcs 9V battery, 2 Pcs battery clip connector, 1 Pcs LDR Sensor Module, 1 Pcs 5V Buzzer, 1 Pcs 12V Relay Module, 40 Pcs Female to Female Jumper wire

DC12V 315MHz 4-CH RF Wireless Relay Module with Remote Controller (White)

Specification:

• Frequency: 315MHz RF
• Operating Voltage (Relay): DC 12V
• Standby Current: 10mA
• Remote Distance: 20-200m
• Relay Channels: 4CH (4 independent relays)
• Remote Control: Approx. 6.8 x 3.8 x 1.5cm/2.7 x 1.5 x 0.6 inch
• Remote Switch : Approx. 7.5 x 5.5 x 2.6cm/3 x 2.2 x 1 inch

1 Channel 12V Relay Module with Optocoupler Isolation, High/Low Level Trigger Pack of 1

Specification:-

• Number of Channels: 1
• Operating Voltage: 12 V DC
• Trigger Voltage: 3.3 V–5 V DC (High/Low Level Trigger)
• Maximum Switching Voltage: 250 V AC / 30 V DC
• Maximum Switching Current: 30 A
• Relay Type: High Current Relay
• Application: Suitable for Home Automation, Arduino, Raspberry Pi, PLC, MCU, and DIY Electronics Projects

16 x 4 Blue/White color LCD display module (JHD539M9)

Specifications

1. Color of display: Blue
2. Color of character: White
3. Size : 16 x 4 (16 character x 4 rows)
4. Power supply : +5V
5. Operating current : 1.65mA
6. Board dimensions  :  88mm x 60mm (LxB)
7. Display dimensions   :   62mm x 26mm (LxB)

4 Channel Wireless Four Button RF Remote Control Receiver Module

Specifications:-

• Receiver operating voltage: DC 5V.
• Operating mode: Non-Locking
• Transmitter Operating voltage: DC 12V
• Transmission distance (m): 3 to 5
• Easy Integration

Combo of LM393 LDR Sensor Module with 5V 1 Channel Relay & Jumper Wire (12 Item)

Specification:-

• Operating voltage : 3.3V-5V
• Power indicator : Red
• Digital switch output indicator : Green
• Number of channels: 1
• Quiescent current: 2mA
• Trigger current: 20mA
• Relay maximum current:  10A

Package Included:-  1 Pcs 5V Relay Module, 1 Pcs LDR Sensor Modulem, 10 Pcs Female to Female Jumper wire

PIR Motion Detector Sensor Module

Specifications:-

1. Detection Range: Usually between 16 and 23 feet (5 to 7 meters)
2. The angle of detection: is typically 120 degrees
3. Operating Voltage: Typically between 3.3 and 5 volts DC
4. Sensitivity Adjustment: Frequently features sensitivity settings that can be changed.
5. Output Signal: Digital (High/Low) or Analog (Voltage)

Snow Raindrops Humidity Rain Weather Detect Sensor Module For Arduino

Specifications:-

1. Operating voltage : 3.3V to 5V
2. Distribution bit to adjust sensitivity
3. A fixed bolt hole for easy installation
4. Power indicator, the output signal LED indicator
5. A large area of ​​rain board, more appropriate to detect rain
6. Board with positioning holes to facilitate installation

PWM DC Motor Speed Controller Speed Switch Module 6V/12V/24V/28V 3A 1203B

Specification:-

• Model: 1203B
• Input Voltage: 6V–28V DC
• Output Current: Max 3A continuous
• Control Method: PWM (Pulse Width Modulation)
• Speed Adjustment: Rotary potentiometer (knob)
• Compact & lightweight PCB design

DC-DC 0.9V to 5V Converter USB Step Up Power Boost Modules Mini PFM Control pack of 10pcs

Specification:-

1. 100% branded and high quality product
2. Input voltage  :  0.9V to 5V
3. Output voltage :  5V
4. Led indicator
5. Mini PFM control
6. High conversion efficiency

TCS3200 Color Recognition Sensor Module

Specification

1. Sensor Type: Color Recognition Sensor (TCS3200).
2. Voltage Range: 2.7V - 5.5V.
3. Output Formats: RGB, HSV, and Grayscale.
4. Compact and Lightweight Module.

OV7670 Camera Image sensor module

Specifications:-

1. Photosensitive Array: 640 x 480.
2. IO Voltage: 2.5V to 3.0V.
3. Operating Power: 60mW/15fpsVGAYUV.
4. Sleeping Mode: <20μA
5. Lens Size: 1/6″.
6. Vision Angle: 25 degrees.
7. Max. Frame Rate: 30fps VGA.
8. Electronic Exposure: 1 to 510 row.
9. Pixel Coverage: 3.6μm x 3.6μm.
10. Duck Current: 12 mV/s at 60℃.

4.5V to 35V DC PWM Speed Controller Mini Electrical Motor Control Switch LED Dimmer Module

Specification:-

1. Operating voltage: DC 4.5V to 35V
2. Control power: 90W (maximum)
3. Quiescent current: 0.015A (standby)
4. PWM duty cycle: 1% -100%
5. PWM frequency: 10khz
6. Size: 29mm*23mm
7. Total height: 15mm

315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module

Application of transmitter:

1. Wireless calling system,
2. Burglar alarm,
3. Wireless data transmission,
4. Automated data acquisition system

Application of receiver:

1. Wireless remote control switch,
2. Remote control socket,
3. Data transmission,
4. Remote control toys,
5. Anti-theft alarm host

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier module pack of 1pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power  :  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

Water Sensor Module for Arduino Moisture / Drop / Depth of Water Test - Red

Features:-

1. Sensor Type: Water sensor module.
2. Purpose: Detects moisture, water depth, or water drops.
3. Compatibility: Designed for Arduino and similar platforms.
4. Color: Red.
5. Versatile for various water-related applications in DIY electronics and projects.

TP4056 Micro USB 5V 1A Lithium battery charging module (b-type) pack of 1pcs

Specifications:-

1. Input supply voltage: -0.3V to 8V
2. Short-Circuit Duration: Continuous
3. BAT Pin Current: 1200 mA
4. PROG Pin Current: 1200 uA

DC-DC 0.9V to 5V Converter USB Step Up Power Boost Module Mini PFM Control pack of 1pcs

Specification:-

1. 100% branded and high quality product
2. Input voltage  :  0.9V to 5V
3. Output voltage :  5V
4. Led indicator
5. Mini PFM control
6. High conversion efficiency

Laser Transmitter Module For Arduino AVR PIC

Specifications 

1. Operating Voltage: 5V.
2. Output Power: 5mW.
3. Wavelength: 650nm (red laser).
4. Suitable for Arduino, AVR, and PIC microcontroller projects.

RepRap Stepper Motor Driver Module A4988

Specifications:-

• Minimum operating voltage: 8V
• Maximum operating voltage: 35V
• Continuous current per phase: 1 Amp
• Maximum current per phase: 2 Amp
• Minimum logic voltage: 3V
• Maximum logic voltage: 5.5V
• Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16

MQ-2 Flammable gas and smoke detection sensor module

Specifications:-

1. Operating voltage:  5V DC
2. Interface type:  Analog and Digital
3. High sensitivity to smoke and combustible gasses like Hydrogen, LPG & Propane.
4. Low Cost
5. Stable & Long Life.
6. Board Power indication

MQ-3 Alcohol Ethanol and Breath gas detection module for Arduino

Specifications:-

1. IC name : LM393
2. Operating voltage : DC 3V to 5V
3. Response time: ≤10s (70% Response)
4. Recovery time: ≤30s (70% Response)
5. Heating resistance: 31Ω±3Ω
6. Heating current: ≤180mA
7. Heating voltage: 5V±0.2V
8. Heating power: ≤900mW
9. Detect voltage: ≤15V
10. Ambient temperature: -10℃ to 65℃
11. Humidity: ≤95%RH

Digital Capacitive Touch Switch Module For Arduino - TTP223B

Specifications:-

1. Power supply voltage(VCC): 2.0, 3, 5.5 V.
2. Output high VOH: 0.8VCC V
3. Output low VOL: 0.3VCC V
4. Response time (touch mode): 60 mS
5. Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
6. Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
7. Response time (low power mode): 220 mS
8. Size : 2.4 x 2.4

Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino

Specifications:-

1. Connects to Arduino using standard SPI pins.
2. Supports Micro SD and TF card formats.
3. Includes a built-in voltage level shifter for 5V and 3.3V systems.
4. Easily interfaces with Arduino for data storage and retrieval.

Flame Sensor infrared receiver ignition source detection module

Specifications:-

1. Output channel : 1
2. Power supply : 3.5V to 5V
3. High Photo Sensitivity
4. Fast Response Time
5. Sensitivity adjustable
6. Working voltage : 3.3V to 5V
7. Detect range : 60 degrees
8. Digital/Analog output
9. On-board LM393 chip

GD4142 Dual USB 5V 1A DC to DC step up booster power bank charging modules pack of 10pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on back
6. Intelligent automatic shutdown

Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducer Sensor DC 5V 2-450cm

Specification:-

1. Operating voltage: 5V DC
2. Operating current: 15mA
3. Measure angle: 15°
4. Ranging distance: 2cm - 400cm
5. Working frequency: 40Hz
6. Trigger input signal: 10uS TTL pulse
7. Echo output signal: Input TTL lever signal and the range in proportion
8. Working voltage : 5V(DC)
9. Static current: Less than 2mA.
10. Output signal: Electric frequency signal, high-level 5V, low-level 0V.

R307 Optical Fingerprint Reader Sensor Module

Specification:-

1. Type: Optical
2. Sensor Life: 100 million times
3. Static indicators: 15KV
4. RS232 communication baud rate: 9600BPS~115200BPS changeable
5. Image Capture Surface 20*15(mm)
6. Verification Speed:  0.2 sec
7. Scanning Speed: 0.3 sec
8. Character file size:  256 bytes

Microphone Sound Sensor, Voice Sensor High Sensitivity Sound Detection, Whistle Module

Specification:-

1. Operating voltage : 3.3V to 5V DC
2. LM393 comparator with threshold preset
3. Induction distance: 0.5 Meter
4. Operating current:  4 to 5 mA
5. Microphone sensitivity (1kHz): 52 to 48 dB
6. Easy to use with Microcontrollers or even with normal Digital/Analog IC

2.4 Inch TFT LCD Shield ILI9341 HX8347 240*320 Touch Board 65K RGB Color Display Module.

Specification:-

1. Display Type: 2.4-inch TFT LCD.
2. Resolution: 240x320 pixels.
3. Controller Chips: ILI9341 and HX8347.
4. Color Depth: 65,536 colors (RGB).

HC-05 Wireless Bluetooth Transceiver RF Main Module Serial For Arduino

Specifications:-

1. Bluetooth Version: 2.0+EDR (Enhanced Data Rate).
2. Operating Voltage: 3.6V - 6V.
3. Communication Range: Up to 10 meters.
4. Supports various communication modes for flexibility in project integration.

ACS712 - 5A range Current detector Sensor Module

Specifications:-

1. Module Dimensions: 31 x 13 x 14 mm (LxWxH)
2. Weight: 3 gm.
3. Supply Voltage: 4.5V~5.5V DC
4. Measure Current Range: -5A~ 5A
5. Sensitivity: 66mV/A
6. The current sensor chips: ACS712_ELC-05B.
7. Pin 5V power supply, on-board power indicator.

3 USB 5V 1A Mobile power bank charger controllers modules pack of 50pcs

Specification:-

1. Charging Voltage:  5V DC
2. Charging Current:  1000mA or 1A
3. LED indication is provided
4. USB Output Voltage:  DC 5V
5. USB Output Current:  1200mA
6. Charging Interface  : 3 Micro USB port

3 USB 5V 1A Mobile power bank charger controller modules pack of 10pcs

Specification:-

1. Charging Voltage  :  5V DC
2. Charging Current  :  1000mA or 1A
3. LED indication is provided
4. USB Output Voltage  :  DC 5V
5. USB Output Current  :  1200mA
6. Charging Interface  : 3 Micro USB port

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 10pcs

Specification:-

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power:  10W+10W
4. Chip name:  PAM8610
5. Efficiency:  90%
6.  Frequency response:  20Hz to 50KHz

LM2596 DC to DC Buck Converter Adjustable Step down power supply module pack of 1pcs

Specifications:-

1. Input voltage : 3V to 40V
2. Output voltage : 1.5V to 35V(Adjustable)
3. Output current : 2A to 3A
4. Module Properties : non-isolated constant voltage module
5. Rectification : non-synchronous rectification
6. Short circuit protection : current limiting

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 50pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

NRF24L01 antenna V5.0 + PA + LNA SMA wireless Module 8 Pin 1100 meters

Specifications:-

1. Input supply voltage: 3V
2. Working current: 15mA
3. Maximum output power: +20 dBm
4. Power down mode current: 4.2 μA
5. Operating range: 1Km

SIM800L GPRS GSM Module for Arduino

Specifications:

• Chip: SIM800L
• Voltage: 3.7-4.2V
• Module size: 2.5cmx2.3cm
• TTL serial port for serial port
• Power module automatically boot, homing network
• Onboard signal lights all the way . It flashes slowly when there is a signal, it flashes quickly when there is  no signal

TCRT5000 Dual Channel Line Tracking sensor module

Specifications:-

1. Module model : TCRT5000
2. Working voltage : DC 3.5V to 5V
3. Output channel : 0/1
4. Detect distance : 1-25mm
5. Focal distance : 2.5mm
6. IC name : LM393
7. Inbuilt indicator light
8. Also, built in potentiometer for sensitivity

T6845-B Power bank charging circuit modules pack of 50pcs

Specification:-

• Charging Voltage:  5V DC
• Charging Current:  1mA
• LED indication
• USB Output Voltage:  DC5V
• USB Output Current:  1200mA
• Charging Interface:  Micro USB port
• Use Battery :- 18650, 3.7V, 12000mah

Dual USB Output 5V 2.1A Power bank charging modules with digital 7 segment display indicators pack of 50pcs

Specifications:

• Material: Alloy.
• Type: Single screwdriver.
• Handle PVC Molded.
• Total length: 130 mm.
• External rod length: 75 mm.
• Rod thickness: 3 mm.
• Weight: 15 gms.

12V Bluetooth MP3 USB charging port FM radio player and decoder modules with Remote pack of 10pcs

Specification:-

1. Working voltage:  12V
2. Support:  mp3/Bluetooth/USB/aux/FM/memory card/USB charging
3. Excellent sound quality
4. Supports USB cable for charging purposes
5. Cheap and easy to install
6. Remote for easy handling

Bluetooth MP3 USB FM radio player and decoder modules with Remote pack of 10pcs

Specification:-

1. Working voltage  :  5V
2. Support  :  mp3/bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Convenient
5. Cheap and easy to install
6. Remote for easy handling

TP4056 5V 1A 18650 Lithium Battery Charging modules (C-TYPE) pack of 10pcs

Specification:-

1. Input voltage  :  5V
2. Charging cut-off voltage  :  4.2V
3. Maximum charging current  :  1000mA
4. Battery over-discharge protection voltage  :  2.5V
5. Battery overcurrent protection current  :  3

JZ6864 Single USB 5V 1A Power bank charging modules pack of 50pcs

Specification:-

1. Charging Voltage:  5V
2. Charging Current:  1mA
3. LED indication
4. USB Output Voltage:  5V/2A
5. Dimensions: 71.5 x 18mm
6. Charging Interface:  Micro USB port
7. The battery must be connected in parallel rather than in series.