TSOP1738 Infrared receiver 3 pins (SM0038) pack of 10pcs

Specification:-

1. Working voltage  :  5V
2. IR signal detection range  :  38khz
3. Operating current  :  5mA
4. High Range and wide coverage area.
5. Low power consumption
6. Has in-built preamplifier
7. Package includes : 10 pieces

TSOP38238 Infrared receiver 3 pins pack of 10pcs

Specification:-

1. Operating voltage  :  2.5V to 5.5V
2. Operating current  :  350μA
3. Output current  :  5mA
4. Carrier frequency  :  40 kHz
5. Transmission distance  :  40 m
6. Package includes : 10 pieces

DC Multi color 5050 SMD LED RGB strip with IR sensor and Remote

Specification:-

1. Type of LED : 5050 SMD LED
2. Emerging color : RGB Multi color
3. Cost effective
4. Easy to use
5. Durable and long lasting

PIR Motion Detector Sensor Module

Specifications:-

1. Detection Range: Usually between 16 and 23 feet (5 to 7 meters)
2. The angle of detection: is typically 120 degrees
3. Operating Voltage: Typically between 3.3 and 5 volts DC
4. Sensitivity Adjustment: Frequently features sensitivity settings that can be changed.
5. Output Signal: Digital (High/Low) or Analog (Voltage)

Flame Sensor infrared receiver ignition source detection module

Specifications:-

1. Output channel : 1
2. Power supply : 3.5V to 5V
3. High Photo Sensitivity
4. Fast Response Time
5. Sensitivity adjustable
6. Working voltage : 3.3V to 5V
7. Detect range : 60 degrees
8. Digital/Analog output
9. On-board LM393 chip

TSOP1738 Infrared receiver 3 pin (SM0038) pack of 2pcs

Specification

1. Working voltage  :  5V
2. IR signal detection range  :  38khz
3. Operating current  :  5mA
4. High Range and wide coverage area.
5. Low power consumption
6. Has in-built pre amplifier
7. Package includes : 2 pieces

Light dependent resistors sensor 12 mm (LDR) GL12528 pack of 2pcs

Specification:-

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  250V
5. Max. power  :  200W
6. Package includes : 5 pieces

IR Proximity Sensor for Line Follower

Specifications:-

1. Operating voltage : 3.6V to 5V DC
2. Digital output : logic one (+3.5V DC) logic zero (0V DC)
3. Mounting hole size : 3mm
4. IC model name : 393
5. Distance measuring range : 2cm to 30cm
6. Effective distance range : 2cm to 80 cm

27 mm diameter Piezoelectric sensor plate pack of 5pcs

Specification

1. Converts Mechanical Force Into Electrical Output
2. Impedance value  :   ≤500Ω.
3. Low soldering temperature.
4. Strain sensitivity  :  5V/µƐ
5. Package includes : 5 pieces

Infrared Obstacle Avoidance Sensor Module

Specifications:-

1. Working voltage : 3V to 5V DC
2. Screw holes : 3mm
3. IC name: LM393
4. Inbuilt indicator lights
5. Easy to assemble and use
6. Onboard detection indication
7. The effective distance range of 2cm to 80cm
8. Preset knob to fine-tune distance range

BFD-1000 5 channel line follower sensor module

Specifications:-

1. Detecting distance: 0-4cm (black line sensor) 0-5cm (adjustable distance detection)
2. Input voltage: 3.0-5.5V
3. Output Type: Digital output (high and low)

MQ-135 Air quality and Gas detection sensor module

Specifications:-

1. Wide detecting scope
2. Fast response and High sensitivity
3. Stable and long life
4. Operating voltage : 3V to 5V
5. Detect/Measure NH3, NOx, alcohol, Benzene, smoke, CO2, etc.

KY032 - TSOP based Infrared obstacle avoidance proximity sensor module

Specifications:-

1. Distance detection: 2cm to 30cm
2. Working voltage: 3.3V to 5V
3. Low Power High immunity against ambient light.
4. TTL and CMOS compatibility.
5. Output active low.

Light dependents resistor sensor 20 mm (LDR) GL20528 pack of 2pcs

Specification:-

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  500V
5. Max. power  :  500W
6. Package includes : 2 pieces

TSOP1838 Infrared receiver silver plating shield (1838B) pack of 5pcs

Specification:-

1. Operating voltage:  2.5V to 5.5V
2. IR detection:  38kHz
3. Operating current:  5mA
4. High range and wide coverage area
5. Improved immunity
6. The package includes: 5 pieces

5 mm infrared receiver black color 2 pin pack of 5pcs

Specification:-

1. Spectral range  :  700-1050
2. Light Current  :   ≥3mA
3. Breakdown Voltage  :  30
4. Maximum forward current   :  25mA
5. Power dissipation  :  100
6. Maximum reverse voltage  :  5V
7. Maximum Forward Voltage  :  1.2 V-1.3V
8. Package includes : 5 pieces

TSOP38238 Infrared receiver 3 pin pack of 5pcs

Specification:-

1. Operating Voltage  :  2.5V to 5.5V
2. Operating Current  :  350μA
3. Output Current  :  5mA
4. Carrier Frequency  :  40 kHz
5. Transmission Distance  :  40 m
6. Package includes : 5 pieces

MQ3 Alcohol, Ethanol and smoke detection sensor pack of 1pcs

Specification

1. High-quality aluminium oxide body
2. Operating voltage  :  5V
3. Sensing resistance  :  2kΩ to 20KΩ
4. Load resistance  :  200kΩ (Adjustable)
5. Heating consumption  :  lower than 750mW
6. Concentration scope : 200 to 10,000ppm

GP2Y0A21YK0F - Sharp distance measuring sensor pack of 1pcs

Specification

1. Operating voltage  :   5V
2. Current consumption  :  30mA
3. Output type  :  analog voltage
4. Detection range  :  10 to 80 cm
5. Package includes : 5 pieces

NTC 10K wire thermistor sensor DS18B20 pack of 1pcs

Specifications:-

1. Programmable Temperature Sensor
2. 1-Wire method
3. Operating voltage  :   5V
4. Temperature range   :  -55°C to +125°C
5. The package include : single piece

MQ3 Alcohol, Ethanol and smoke detection sensors pack of 5pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Sensing resistance  :  2kΩ to 20KΩ
4. Load resistance  :  200kΩ (Adjustable)
5. Heating consumption  :  lower than 750mW
6. Concentration scope : 200 to 10,000ppm

MQ3 Alcohol, Ethanol and smoke detections sensor pack of 10pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Sensing resistance  :  2kΩ to 20KΩ
4. Load resistance  :  200kΩ (Adjustable)
5. Heating consumption  :  lower than 750mW
6. Concentration scope : 200 to 10,000ppm

Light dependents resistor sensors 20 mm (LDR) GL20528 pack of 10pcs

Specification

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  500V
5. Max. power  :  500W
6. Package includes : 10 pieces

5 mm infrared receiver black color 2 pins pack of 20pcs

Specification

1. Spectral range  :  700-1050
2. Light Current  :   ≥3mA
3. Breakdown Voltage  :  30
4. Maximum forward current   :  25mA
5. Power dissipation  :  100
6. Maximum reverse voltage  :  5V
7. Maximum Forward Voltage  :  1.2 V-1.3V
8. Package includes : 20 pieces

DHT11 Temperature and humidity sensor pack of 5pcs

Specification

1. Operating Voltage  :  5V
2. Operating current  :  0.3mA
3. Temperature Range  :  0°C to 50°C
4. Humidity Range  :  20% to 90%
5. Package includes : 20 pieces

DHT11 Temperature and humidity sensors pack of 10pcs

Specification

1. Operating voltage  :  5V
2. Operating current  :  0.3mA
3. Temperature range  :  0°C to 50°C
4. Humidity range  :  20% to 90%
5. Package includes : 100 pieces

MQ4 Methane, CNG and flammable gas detection sensors pack of 5pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Target gas : Methane
4. Sensing resistance  :  2kΩ to 20KΩ
5. Load resistance  :  200kΩ (Adjustable)
6. Heating consumption  :  lower than 750mW
7. Concentration scope : 200 to 10,000ppm

MQ4 Methane, CNG and flammable gas detections sensors pack of 10pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Target gas : Methane
4. Sensing resistance  :  2kΩ to 20KΩ
5. Load resistance  :  200kΩ (Adjustable)
6. Heating consumption  :  lower than 750mW
7. Concentration scope : 200 to 10,000ppm

MQ5 LPG and Natural flammable gas detection sensors pack of 5pcs

Specification:-

1. High-quality aluminum oxide body
2. Operating voltage:  5V
3. Target gas: LPG
4. Sensing resistance:  2kΩ to 20KΩ
5. Load resistance:  200kΩ (Adjustable)
6. Heating consumption:  lower than 800mW
7. Concentration scope: 200 to 10,000ppm

NTC 10K wire thermistor sensors DS18B20 pack of 5pcs

Specifications:-

1. Programmable Temperature Sensor
2. 1-Wire method
3. Operating voltage  :   5V
4. Temperature Range   :  -55°C to +125°C
5. Package include : 5 pieces

NTC 10K wire thermistors sensors DS18B20 pack of 10pcs

Specifications

1. Programmable Temperature Sensor
2. 1-Wire method
3. Operating voltage  :   5V
4. Temperature range   :  -55°C to +125°C
5. Package includes : 10 pieces

GP2Y0A21YK0F - Sharp distance measuring sensors pack of 5pcs

Specification

1. Operating voltage  :   5V
2. Current consumption  :  30mA
3. Output type  :  analog voltage
4. Detection range  :  10 to 80 cm
5. Package includes : 20 pieces

TSOP1838 Infrared receivers silver plating shields (1838B) pack of 50pcs

Specification:-

1. Operating voltage  :  2.5V to 5.5V
2. IR detection  :  38kHz
3. Operating current  :  5mA
4. High Range and wide coverage area.
5. Improved immunity
6. Package includes : 50 pieces

5mm Mercury switch tilt angle sensor Unidirectional electric induction switch pack of 1pcs

Specifications

1. Operating voltage : 3.3V to 5V
2. Output format : Digital switching outputs (0 and 1)
3. Capsule diameter : 5mm
4. Low cost solution for inclinometer
5. Mercury conduction method

5mm Mercury switch tilt angle sensor Unidirectional electric induction switch pack of 5pcs

Specifications

1. Operating voltage : 3.3V to 5V
2. Output format : Digital switching outputs (0 and 1)
3. Capsule diameter : 5mm
4. Low cost solution for inclinometer
5. Mercury conduction method

5mm Mercury switch tilt angle sensors Unidirectional electric induction switch pack of 10pcs

Specifications

1. Operating voltage : 3.3V to 5V
2. Output format : Digital switching outputs (0 and 1)
3. Capsule diameter : 5mm
4. Low cost solution for inclinometer
5. Mercury conduction method

8 Section AM FM Radio Universal antenna stainless steel replacement antenna Silver color

Specifications:

• Frequency: 45 to 450MHZ
• Material: Chromium Copper
• Number of sections: 8
• Maximum stretch length: 54cm / 21 in
• Shortest contraction length: 12.8cm / 5 in
• 360° rotatable

Micro USB B type Mike Patch straight plug adapter plate welding head breakout boards pack of 10pcs

Specifications:-

1. 100% High quality and Branded product
2.  Base material : FR4
3. Number of pins : 5
4. Type : B type
5. Connector type : Female
6. Pin pitch size : 2.54mm
7. Used in wide range of application

Transmissive Optical switch sensor with Phototransistor Output photo interrupter sensor

Specifications

1. Operating voltage range : 4.5V to 12V DC
2. Forward current : 50mA
3. Reverse voltage : 4V
4. Forward voltage : 1.2V
5. Aperture width : 0.5mm
6. Sensor mounting : Through hole
7. Power dissipation : 100mW

10K NTC Thermistor temperatures sensor

Specifications:-

1. Output : 2 wires XH(2.54) -2Y
2. Type : NTC 10k±1% 3950
3. Size of probe : 5mm x 25mm
4. Length of wire : 500 mm
5. Measurement range : -30°C to 120°C

Diy Mini IR Sensor Kit With Video Tutorial & User Manual

Specification

• 100% Best quality and Branded Products
• Diy Mini IR Sensor Kit
• User Manual & Video Tutorial 
• Battery Holder
• Push Connector
• IR Sensor 

SC110-1 12V 3A Touch Sensor Switch for Mirror Light (33x33x7)

Specification

1. Input voltage      DC12V
2. Output voltage   3A
3. Model                 SC110-1
4. Dimension          33 x 33 x 7
5. Output line         double line 250mm
6. Input line            3 line 150mm

100V Wired Door Window Sensor Magnetic Switch For Home Alarm System (25 x10 x 5)mm pack of 2 pcs

Specification

1. Material: plastic
2. Color: white
3. Voltage: 100V
4. Rated Power (W): 10 watts
5. Cable length:  27 cm
6. Dimensions:  25 x 10 x 5 mm

100V Wired Door Window Sensor Magnetic Switch For Home Alarm System (25 x10 x 5)mm pack of 10 pcs

Specification

1. Material: plastic
2. Color: white
3. Voltage: 100V
4. Rated Power (W): 10watt
5. Cable length:  27 cm
6. Dimension:  25 x 10 x 5 mm

100V Wired Door Window Sensor Magnetic Switch For Home Alarm System (25 x10 x 5)mm pack of 100 pcs

Specification

1. Material: plastic
2. Color: white
3. Voltage: 100V
4. Rated Power (W): 10watt
5. Cable length:  27 cm
6. Dimensions:  25 x 10 x 5 mm

NTC temperature sensor 10K 1% accuracy temperature sensing probe pack of 1pcs

Specification:

1. Measurement range: -20 to 105 Celsius
2. Sensor size: 20*4mm
3. Stainless steel and waterproof
4. NTC Thermistor Temperature Sensor 
5. 10K 1% Cable 
6. Waterproof Probe

NTC temperature sensor 10K 1% accuracy temperature sensing probe pack of 10 pcs

Specification:

1. Measurement range: -20 to 105 Celsius
2. Sensor size: 20*4mm
3. Stainless steel and waterproof
4. NTC Thermistor Temperature Sensor 
5. 10K 1% Cable 
6. Waterproof Probe

HW-456-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module

Specification

1. Operating Voltage Range: DC4.5-20V
2. Static current: <60uA
3. Output Level: High 3.3 v / Low 0 v
4. Trigger: Repeatable trigger (default)
5. Working temperature: -20- + 80 degrees
6. Fast Response Time
7. Sensitivity adjustable

DIY Mini IR Detector Kit With User Mannual And Video Tutorial

Specification

1. 100% Best quality and Branded Products
2. Diy Mini Ir Detector Kit
3. User Manual & Video Tutorial 
4. Battery Holder
5. Push Connector
6. Ir Sensor
7. Buzzer
8. It comes with a user manual, a detailed video tutorial, and all the necessary materials.
9. Excellent choice for a starter pack

DIY Mini IR signal detector kit ( Battery Holder, Push Connector, IR sensor, Led, Cell’s, Buzzer) with User Manual and Video Tutorial

Specification : 

• 100% Best quality and Branded Products
• Diy Mini IR signal detector kit
• The kits are easy to assemble and come with a build guide
• Very easy to make and the parts are easy to find
• Excellent choice for a starter pack

Electronic Spices DIY Mini Temperature Sensor Kit With User Manual And Video Tutorial

Specification:

• 100% Best quality and Branded Products
• Diy Mini Temperature Sensor Kit 
• Battery Holder
• Cell’s
• Push Connector
• Buzzer
• Led
• User Manual & Video Tutorial 
• IR Sensor

Photoelectric Sensor Optical Three Lines Normally Open

Specification:-

• Its type is DC 3 Wire NPN Normally Open.
• Its sensory distance is 10cm electric positioned.
• Output Form : 3 Wires; Voltage : DC 6-36V; 
• 1 x Photoelectric Switch Photo Cell

SW1801 – Vibration sensor module

Specifications:-

• Operating Voltage: 3.3V to 5V DC
• Operating Current: 15mA
• LEDs indicating output and power
• Small, cheap, and easily available
• Bolt holes for easy installation

Water Tank Overflow Alarm with Voice Sound Wired Sensor and Red Indicator

Specification:-

• Early Warning System
• Easy Installation
• Instant Alerts
• Loud human voice Alarm
• Low maintenance
• Alarm in two Languages: English & Hindi

Strobe Siren System DC12V/24V with Three Different Tones Sound and Light Alarms

Specification:-

• Condition: 100% Brand New
• Item Type: Sound and Light Alarm
• Color: Red
• Voice: 3Tones
• Working Current: 75mA / 150mA
• Operating Voltage: 12/24VDC
• Audio Alarm: ≥105dB/115dB

Combo of 37 in 1 Ultimate Sensor Kit for Arduino

Specification:-

• 10K resistor Rotary encoder module
• Hall effect detection sensor (easily available)
• Joystick sensor Input voltage range: 3.3V to 5V
• Suitable for Arduino, AVR, and PIC microcontroller projects
• The sensor module kit is perfect for various DIY projects and robotics science projects
• The Arduino sensor kit can be used by both beginners and professionals.
• This is a great sensor kit for getting started with microcontrollers and sensors.

Package includes:- Joystick module, Relay module, Big sound, Small sound, Tracking, Avoid, Flame, Linear hall, Touch, Digital temp, Buzzer, Passive buzzer, RGB led, SMD led, Two color, Two color, Reed switch, Mini reed, Heartbeat, 7-color flash, Laser emit, Button, Shock, Rotary encoders, Light cup, Tilt switch, Ball switch, Photoresistor, Temp and humidlty, Analog hall, Hall magnetic, TEMP 18B20, Analog temp, TR emission, IR receiver, Tap module, and Light blocking Sensors. 

220-240V AC Small PIR Motion Sensor Switch

Specifications:-

• Controllable load: ≤40W
• Input voltage: 220-240V
• Item color: White
• Switch Type: Sensor Switch
• Working temperature: ﹣20--40℃
• Delay time (adjustable): 15s/ 45s/ 5 mins

21.5 mm Diameter Double Sided Ceramic Piezoelectric Wafer Plate Sensor Enameled Wire Pack of 5

Specifications:-

• Type: Double-Sided Ceramic Piezoelectric Wafer Plate Sounder Sensor
• Diameter: 21.5mm
• Material: Piezoelectric ceramic wafer plates
• Connection: Enameled wire for electrical connections
• Sensitivity: High sensitivity to mechanical vibrations
• Mounting: Flexible mounting options for convenient installation

Combo of DT266 Digital Clamp Multimeter with Voltage Tester Pen & Continuity Tester (3 Tools Set)

Specification:-

• Small continuity tester
• DT266 Digital clamp multimeter
• Meter type: Digital
• Low battery indicator
• Overload protection
• Voltage Detector Sensor Tester Pen

32CH DC 12/24 Volt Stair Motion Sensor Controller for LED Staircase Strip Lighting

Specifications:-

• Model: v2-step-1002
• Voltage: DC 12/24v
• Power: Single step: 15W
• Total Power: 500W
• Switch Style: Touch
• 32CH Stair Controller

3kg Load Cell Weighing Scale Sensor With Wire

Specification:-

• Material: Aluminum 
• Capacity: 3kg (3000 grams)
• Operating Voltage: 5v to 10v
• Rated Output: 1.0 ± 0.1mV / V
• Input Impedance: 1066 ± 10% Ω
• Output Impedance: 1000 ± 10% Ω
• Operating Temperature Range: -21º ~ 40º C

27mm Diameter Piezoelectric Sensor Plate with Wire

Specification:-

• Impedance value:  ≤500Ω.
• Size if diameter: 27mm
• Low soldering temperature.
• Strain sensitivity:  5V/µƐ
• Converts Mechanical Force Into Electrical Output

35mm Diameter Piezoelectric Sensor Plate with Wire

Specification:-

• Impedance value:  ≤500Ω.
• Size if diameter: 35mm
• Low soldering temperature.
• Strain sensitivity:  5V/µƐ
• Converts Mechanical Force Into Electrical Output

TB-3A 12V Touch Sensor Switch For Mirror Light

Specification:-

• Input voltage: DC12V
• Output voltage: 3A
• Circuit Type: 1 Way
• Touch Type: Capacitive
• Number of Module: 1 Module

K-Type Temperature Sensor Thermocouple Probe Copper Wire 1-Meter

Specification:-

• Cable length: 1M
• Measuring range: -50 to 700 °C
• Color: Yellow
• Accuracy: ±2.5%/0.75%
• Material: Plastic
• Interface Type: flat plug-in

DIY Combo Kit for Automatic Hand Sanitizer Dispenser | Includes IR Sensor | Relay | Water Pump

Specification:-

• Type: male to male
• 5V 1-channel relay module 
• IR Proximity Sensor
• 2.5mm x 100mm Black cable tie 
• 6V to 12V DC Mini underwater pump

Package Included:- 2 pcs Cable tie, 20 pcs Jumper Wire, 1 pcs Relay Module, 1 pcs IR Sensor, 1 pcs Underwater pump, 2 meter Pipe

Combo of Jumper wire with UNO Board & Ultrasonic Sensor (123 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 

Package Included:- 40 pcs Male to Male Jumper wire, 40 pcs Female to Female Jumper wire, 40 pcs Male to Female Jumper Wire, 1 pcs Ultrasonic Sensor, 1 pcs USB Cable, 1 Pcs UNO Board

DIY Combo Kit ESP8266MOD with Breadboard | Jumper Wires | BMP180 Sensor | OLED Display | USB Cable (85 Items)

Specification:-

• Tie points: 400
• ESP8266MOD NodeMCU Development Board
• BMP180 Atmospheric pressure sensor module
• 0.9-inch OLED Screen Display Module
• Male-to-Male 40-Pin Jumper wire
• Male-to-Female 40-Pin Jumper wire

Component List: 1 Pcs B-Type USB Cable, 1 Pcs ESP8266MOD Development Board, 1 Pcs BMP180 - Digital barometer, 1 Pcs OLED Screen Display Module 4-pin, 1 Pcs 400 points Half-size solderless breadboard, 40 Pcs Male-to-Female Jumper wire, 40 Pcs Male to Male Jumper wire

DC 12V to 60V 8A Automatic Led Infrared PIR Motion Detector Sensor Switch

Specification:-

• Actuator Type:  Sensor
• Voltage: DC 12V-60V 
• Output Current:8V
• Operation Mode: ON-OFF
• Output: 1 Channel

Combo of Electronics DIY Kit | Breadboard | Jumper Wires | DHT11 Sensor | LCD Display & R3 Board (125 Items)

Specification:-

• DHT11 5V Sensor Module
• 16 x 2 LCD Green & Yellow display
• LCD Size : 16 x 2 (16 character x 2 rows)
• 400 point Breadboard 
• Breadboard Dimensions : 82mm x 55mm 
• R3 CH340G 5V development board 
• Model name : UNO R3 

Combo of LM393 LDR Sensor Module with 5V 1 Channel Relay & Jumper Wire (12 Item)

Specification:-

• Operating voltage : 3.3V-5V
• Power indicator : Red
• Digital switch output indicator : Green
• Number of channels: 1
• Quiescent current: 2mA
• Trigger current: 20mA
• Relay maximum current:  10A

Package Included:-  1 Pcs 5V Relay Module, 1 Pcs LDR Sensor Modulem, 10 Pcs Female to Female Jumper wire

Combo of Electronics DIY Kit | 5V Relay | Mini Water Pump | Proximity Sensor | Jumper Wires (48 Items)

Specification:-

• Power Source: DC
• Material: Polyvinyl Chloride
• Power current:  1.9A
• Working voltage:  6V to 12V
• Digital output : logic one (+3.5V DC) logic zero (0V DC)
• Distance measuring range : 2cm to 30cm
• Effective distance range : 2cm to 80 cm
• Number of channels: 1
•  Supply voltage: 3.75V to 6V
• Current when the relay is active: 70m

Package Included:-  2 Pcs 9V Battery, 2 Pcs Battery Clip Connector, 1 Pcs 5V Relay Module, 40 Pcs Female to Female Jumper Wire, 1 Pcs DC Mini Motor Pump with 1M Tubing, 1 Proxmity Sensor

Combo of Rain Detect Sensor for School Project with Jumper Wire|Water Pump & 5V Relay Module (43 Item)

Specification:-

• Working voltage: 6V to 12V
• Power current: 1.9A
• Max. flow : 50 liter/hour
• Distribution bit to adjust sensitivity
• 5V Relay Module – Enables seamless control of electrical devices based on sensor input.

Package Included:- 1 pcs 5V Relay Module, 1 pcs water pump, 1 pcs Rain detect Sensor, 40 pcs Female to Female Jumpere wire

Combo of LM393 LDR Sensor with 12V 2- Channel Relay Module & 40 Pcs Jumer wire (47 Item)

Specification:-

• Number of channels : 2
• Operating voltage : 12V
• Max. current : 20mA
• 40 Jumper Wires – Provides the necessary connections for easy circuit assembly.
• LM393 LDR Sensor – Detects light levels and triggers responses based on light intensity.

Package Included:- 2 Pcs 9V battery, 2 Pcs battery clip connector, 1 Pcs LDR Sensor Module, 1 Pcs 5V Buzzer, 1 Pcs 12V Relay Module, 40 Pcs Female to Female Jumper wire

Combo of Jumper Wire & UNO Board with Ultrasonic Sensor Module (64 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 
• G90 Micro digital servo motor 

Package Included: 20 pcs Male to Male Jumper wire | 20 pcs Female to Female Jumper wire | 20 pcs Male to Female Jumper wire | 1 pcs Ultrasonic Sensor | 1 pcs USB Cable | 1 pcs SG90 Servo Motor | 1 pcs UNO R3 AVR USB Development board

DIY Line Follower Robot Kit | Arduino IDE Compatible | 3-Array IR Sensor | Robotics STEM Learning Kit for Students

Specification:

• Controller: Arduino Uno R3 compatible board
• Sensor: 3-Array IR Line Tracking Module
• Motor Driver: L298N or equivalent
• Motors: DC Gear Motors with wheels
• Chassis: DIY car frame with caster wheel
• Power: Battery holder included
• Programming: Arduino IDE

Electronic Sensors Kit with DIY Projects Controller Board, RFID, Ultrasonic, IR, Smoke Components (95 Item)

Specifications:-

• 400 points Half size Solderless breadboard
• UNO R3 AVR USB Development board
• 6V - 12V DC Mini underwater pump
• Humidity Detection Moisture Sensor
• 16 x 2 Yellow/Green color LCD display
• RC522 RFID Card Reader Module
• Flammable gas and smoke detection sensor
• IR Proximity Sensor for Line Follower
  

Component List: 1 Pcs Controller Board, 1 Pcs Breadboard, 1 Pcs 4X4 16 Matrix Membrane Keypad, 1 Pcs USB cable, 1 Pcs Ultrasonic Sensor, 1 Pcs IR Proximity Module 1 Pcs DHT-11 Sensor, 1 Pcs MQ-2 smoke detection sensor module, 1 Pcs RC522 RFID Card Reader Module, 1 Pcs 16x2 LCD, 1 Pcs Soil Hygrometer Humidity, 1 Pcs mini water Pump, 5 pieces each of red, green, and white LEDs, 1 Pcs RGB LED, 10 Pcs Resistor (100K), 1 piece of 9V battery, 2 Pcs 100K ohm vertical preset variable resistors, 1 piece of 1-digit 7-segment Display 1 Pcs Buzzer, 2 Pcs push button switch (12x12x7), 4 Pcs NPN transistor (BC547), 2 Pcs rectifier diodes (1N4007 ), 1 Pcs light-dependent resistor (GL5528), 1 Pcs 9V battery connector, 40 Jumper wires (Male to Female, Male to Male)

Wireless HI-FI Bluetooth MP3 USB FM player module with remote and stereo 5W+5W output for speakers pack of 10pcs

Specification:-

1. Working voltage  :  5V
2. Support  :  mp3/bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Can connect speakers directly
5. Cheap and easy to install
6. Remote for easy handling

HT12E Encoder DIP 18 pins IC for remote control system pack of 10pcs

Specification

1. Function: DIP Encoder IC
2. Number of pins: 18
3. Operating voltage range: 2.4V to 12V
4. Data code has a positive polarity
5. Low standby current: 0.1µA at 5V
6. Built-in oscillator
7. Low power and high noise immunity

Wireless HI-FI Bluetooth MP3 USB FM player module with remote and stereo 5W+5W output for speakers pack of 50pcs

Specification

1. Working voltage:  5V
2. Support:  mp3/Bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Can connect speakers directly
5. Cheap and easy to install
6. Remote for easy handling

Combo of 6283 IC Stereo Circuit Board and Bluetooth with Remote

Specifications:

• 100% OK Tested Product
• combo of 6283 IC Stereo Circuit Board and Bluetooth FM Audio Player Decoder Module Kit
• In 6284 IC you can give sound input from other sound sources like Mobile, TV, DVD, Computer, Projector
• Bluetooth FM Support MP3/USB/TF/AUX/FM/BLUETOOTH

Wireless HI-FI Bluetooth MP3 USB FM player module with remote and stereo 5W+5W output for speaker pack of 1pcs

Specification:-

1. Working voltage:  5V
2. Support:  mp3/Bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Can connect speakers directly
5. Cheap and easy to install
6. Remote for easy handling

TSOP1738 Infrared receivers 3 pins (SM0038) pack of 50pcs

Specification:-

1. Working voltage  :  5V
2. IR signal detection range  :  38khz
3. Operating current  :  5mA
4. High Range and wide coverage area.
5. Low power consumption
6. Has in-built preamplifier
7. Package includes : 50 pieces

TSOP1838 Infrared receivers silver plating shield (1838B) pack of 10pcs

Specification

1. Operating Voltage  :  2.5V to 5.5V
2. IR detection  :  38kHz
3. Operating current  :  5mA
4. High Range and wide coverage area.
5. Improved immunity
6. Package includes : 10 pieces

TSOP38238 Infrared receivers 3 pins pack of 50pcs

Specification:-

1. Operating voltage  :  2.5V to 5.5V
2. Operating current  :  350μA
3. Output current  :  5mA
4. Carrier frequency  :  40 kHz
5. Transmission distance  :  40 m
6. Package includes : 50 pieces

Viper22A GF138022 SMPS power supply controller DIP 8 pins IC pack of 50pcs

Specifications

1. SMPS switching controller IC
2. AC to DC converter
3. Operating voltage : 9V to 30V
4. Oscillator frequency  :  60 kHz typically
5. Mosfet drain to source voltage :  730V
6. Off-state drain current:  0.1mA

12V DC Electric lock door assembly solenoid small electric lock with wireless remote

Specification:-

1. Operating voltage : 12 Volt
2. Remote comes with an inbuilt battery
3. The remote is wireless
4. High-quality compact electric lock.
5. Safe and convenient to use.
6. Applied to the cabinet lock
7. Durable and energy-saving
8. Offers long life

Wireless HI-FI Bluetooth MP3 USB FM player module with remote, stereo, volume, bass and treble control complete amplifier system

Specification

1. Working voltage  :  12V DC
2. Speaker Watt: 40W +40W
3. Support  :  mp3/bluetooth/USB/aux/FM/memory card
4. Excellent sound quality
5. Can connect speakers directly
6. Cheap and easy to install
7. Remote for easy handling

Bluetooth FM with MIC Slot Big Display USB IR Antenna Slot MP3 Stereo Audio Player Decoder Module Kit with Big Remote

Specification:-

1. Working voltage  :  5V
2. Support  :  mp3/bluetooth/USB/FM/memory card/Mic slot/IR antenna slot/Big digital display/Big remote controller
3. Excellent sound quality
4. Can connect speakers directly
5. Cheap and easy to install
6. Remote for easy handling

4CH RC remote control 27MHz circuit PCB transmitter & receiver board with antenna Radio system for toy car

Specification:-

• Receiver operating voltage: 3.7–6V
• Transmitter operating voltage: 3.7-9V (HW Battery)
• Transmitter Range: 12-15 (approx)
• Color: Brown
• Material: fiberglass
• Electronic frequency: 27MHZ
• Dimensions: pad 3 * 9 cm, receiving plate 3.5 * 2 cm, Antenna, 19 cm
• Item Weight: 16g

Wire is only for referral purposes. (Not Compulsory)

Decoder Board Audio Wireless Amplifier Module FM, USB, AUX, TF, MP3 Stereo Audio Player Decoder Module with Remote for Amplifier ( 115 x 50)mm