433MHz RF Transmitter and Receiver Wireless Module Kit

Specification:-

RF ASK Transmitter

• Frequency Range: 433.92 MHz
• Supply Voltage : 3V ~ 12V
• Output Power: 4 ~ 12 dBm
• Standard Operating Voltage: 5V

RF ASK Receiver

• Receiver Frequency: 433.92 MHz
• Typical Sensitivity: 105 dBm
• Supply Voltage : 3V ~ 12V
• Supply Current: 3.5 mA
• Standard Operating Voltage: 5V

RF Transmitter 433 Mhz Remote Controls with Wireless Remote Control Switch AC 220V / 30A / 18-10AWG

Specifications:-

• Operating voltage: AC 220V – 300V
• Switch Type: Remote Control
• Material: plastic and metal.
• Wiring type: fixed terminal.
• Control lights, motors, and fans are electrically operated.
• Push the remote button, and the LED flashes on and off.

DC 12V 2 Channel Transmitter RF Relay Module with Wireless Remote Control Switch

Specification:-

• Voltage: DC12V
• Channels: 2
• Current Rating: 10 Amps
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Control Lights, Motors, Fans, electrically operated.
• Push the remote button, LED flashes on and off.

315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module

Application of transmitter:

1. Wireless calling system,
2. Burglar alarm,
3. Wireless data transmission,
4. Automated data acquisition system

Application of receiver:

1. Wireless remote control switch,
2. Remote control socket,
3. Data transmission,
4. Remote control toys,
5. Anti-theft alarm host

HC-05 Wireless Bluetooth Transceiver RF Main Module Serial For Arduino

Specifications:-

1. Bluetooth Version: 2.0+EDR (Enhanced Data Rate).
2. Operating Voltage: 3.6V - 6V.
3. Communication Range: Up to 10 meters.
4. Supports various communication modes for flexibility in project integration.

NRF24L01 antenna V5.0 + PA + LNA SMA wireless Module 8 Pin 1100 meters

Specifications:-

1. Input supply voltage: 3V
2. Working current: 15mA
3. Maximum output power: +20 dBm
4. Power down mode current: 4.2 μA
5. Operating range: 1Km

IIC or I2C Serial interface adapter module for 16 x 2 (1602) Character LCD display

Specifications:-

1. IC Name : PCF8574
2. Operating voltage : 5V
3. PCB size : 42mm x 20mm(L x B)
4. Serial I2C control of LCD display using PCF8574.
5. Backlight can be enabled or disabled via a jumper on the board.
6. Contrast control via a potentiometer.

Combo of 16x2 Jumbo LCD Display (Yellow-Green) with I2C Interface Module

Specification:-

1. Display
   1. Color of display: Green
   2. Color of character: Yellow
   3. Size : 16 x 2 (16 character x 2 rows)
   4. Input voltage: +5V
   5. Supply current: 1.5mA
2. Module
   1. IC Name: PCF8574
   2. Operating voltage: 5V
   3. PCB size : 42mm x 20mm(L x B)
   4. Serial I2C control of LCD display using PCF8574.

MADE IN INDIA L293D Motor driver module perfect for driving DC Motors and Stepper Motors

Specifications:-

1. MADE IN INDIA
2. Driver model name : L293D
3. Operating voltage : 4V to 12V
4. Peak current : 0.6A
5. Number of channels : 1
6. The driver has two holes of 3 mm dia.
7. High noise immunity inputs.

SMA, SMAJ6.5A, 6.5V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 6.5v
3. Maximum average rectified current : 26.8A
4. Maxim reverse current : 500µA
5. Maxim forward voltage : 11.2V

SMC(G) SMCJ11 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 11.0V
3. Maximum peak pulse current : 74.6A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 20.1V
6. Power dissipation : 1500W

SMC(G) SMCJ60 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 60.0V
3. Maximum peak pulse current : 14.0A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 107V
6. Power dissipation : 1500W

SMC(G) SMCJ60A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 60.0V
3. Maximum peak pulse current : 15.5A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 96V
6. Power dissipation : 1500W

RF Transmitter 433 Mhz Remote Controls with Wireless Remote Control Switch DC 12V

Specifications:-

• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes, and off.
• 3 mode function : Momentary, Toggle, Latching Mode have inside

DC 12V RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

DC 12V 1 Channel RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Voltage: DC12V
• Current Rating: 10 Amps
• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

4 Channel Wireless Four Button RF Remote Control Receiver Module

Specifications:-

• Receiver operating voltage: DC 5V.
• Operating mode: Non-Locking
• Transmitter Operating voltage: DC 12V
• Transmission distance (m): 3 to 5
• Easy Integration

2835 Cool White Color 0.2W High Power SMD LED Pack of 17000

Specification:-

• Power rating: 0.2Watt
• Dimensions: 2.8mm x 3.5mm (L x B)
• Max. Drive current range: 60mA to 150mA
• LED junction temperature: 125°C
• Soldering temperature: 260°C for max. 10 seconds

IRF540 Isolation Power Module Electronic Block 4-Channel MOSFET Switch

Specification:-

• MOSFET Type: IRF540
• Number of Channels: 4
• Control Voltage: 3.3V to 5V DC
• Load Voltage: Up to 100V DC
• Load Current: Up to 33A per channel

RDM 6300-125KHZ EM4100 RFID Card Reader Module

Specification:-

• Frequency: 125KHZ
• Humidity: 0~95%
• Working voltage: DC 5V(+/-5%)
• Interface: TTL level RS232 format
• Working temperature: -10°C~+70°C

0.91 Inch 128 x 32 Blue OLED Display Module with I2C/IIC Serial Interface

Specification:-

• Driving IC: SSD1306
• Operating Voltage: 3.3-5V
• Resolution: 128×32 pixels
• Text Color: Blue
• Communication Interface: I2C

Pin:

• GND: Power Ground
• VCC: Power + (DC 3.3 ~5v)
• SCL: Clock Line
• SDA: Data Line

433Mhz RF Wireless Transmitter and Receiver Module for Arduino

Specification:-

Receiver Module

• Operating voltage: DC5V
• Quiescent Current: 4MA
• Receiving frequency: 433.92MHZ
• Receiver sensitivity: -105DB

Transmitter Module

• Operating voltage: 3.5-12V
• Transmitting frequency: 433M
• Pinout from left-right: (DATA; VCC; GND)

DC 12V Dual Channel Transmitter RF Relay Module with Remote Controller

Specification:-

• Channels: 2
• Voltage: DC12V
• Current Rating: 10 Amps
• Working frequency: 433MHz/315MHz
• Working temperature: -30°c+70°c
• Material: Plastic + Metal

JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader

Specification:-

• Model: JT308
• Frequency: 125Khz.
• Power input: Through usb 
• Support for EM4100 cards
• Interface: USB, 106bit / s, no additional driver required.
• Read the first 10 digits of the RFID/Proximity card.

RC522 RFID Card Reader Module 13.56MHz

Specification:-

• Working Current @ 3.3V: 13 – 26mA
• Standby Current @ 3.3V: 10 – 13mA
• Sleep Current: <80μA
• Peak Current: <30mA
• Working Frequency: 13.56MHz
• Card Reading Distance: 0-60mm
• Communication Protocol: SPI
• Data Communication Speed: 10Mbit/s Max

SIM900A GSM GPRS Module with RS232 Interface and SMA Antenna

Specification:-

• Power supply 12v 1amp to 2 amps max
• Quad-Band GSM/ 850/900/1800/1900MHz
• Compatible with Arduino, Raspberry Pi, arm, AVR, pic, 8051
• Use in the area of full signal strength
• Perfectly suited for GSM-based Microcontroller Projects 

Combo of IIC or I2C Serial Interface Adapter Module with 16 x 1 Yellow/Green Color LCD Display

Specification:-

Display

• Color of display: Green
• Color of character: Yellow
• Input voltage : +5V
• Supply current : 1.2mA
• Size : 16 x 1 (16 character x 1 rows)

Module

• IC Name: PCF8574
• Operating voltage: 5V
• PCB size : 42mm x 20mm(L x B) 

Package Included: 1 pcs IIC or I2C Serial Interface, 1pcs 16 x 1 LCD display 

DC12V 315MHz 4-CH RF Wireless Relay Module with Remote Controller (White)

Specification:

• Frequency: 315MHz RF
• Operating Voltage (Relay): DC 12V
• Standby Current: 10mA
• Remote Distance: 20-200m
• Relay Channels: 4CH (4 independent relays)
• Remote Control: Approx. 6.8 x 3.8 x 1.5cm/2.7 x 1.5 x 0.6 inch
• Remote Switch : Approx. 7.5 x 5.5 x 2.6cm/3 x 2.2 x 1 inch

PIR Motion Detector Sensor Module

Specifications:-

1. Detection Range: Usually between 16 and 23 feet (5 to 7 meters)
2. The angle of detection: is typically 120 degrees
3. Operating Voltage: Typically between 3.3 and 5 volts DC
4. Sensitivity Adjustment: Frequently features sensitivity settings that can be changed.
5. Output Signal: Digital (High/Low) or Analog (Voltage)

Snow Raindrops Humidity Rain Weather Detect Sensor Module For Arduino

Specifications:-

1. Operating voltage : 3.3V to 5V
2. Distribution bit to adjust sensitivity
3. A fixed bolt hole for easy installation
4. Power indicator, the output signal LED indicator
5. A large area of ​​rain board, more appropriate to detect rain
6. Board with positioning holes to facilitate installation

PWM DC Motor Speed Controller Speed Switch Module 6V/12V/24V/28V 3A 1203B

Specification:-

• Model: 1203B
• Input Voltage: 6V–28V DC
• Output Current: Max 3A continuous
• Control Method: PWM (Pulse Width Modulation)
• Speed Adjustment: Rotary potentiometer (knob)
• Compact & lightweight PCB design

DC-DC 0.9V to 5V Converter USB Step Up Power Boost Modules Mini PFM Control pack of 10pcs

Specification:-

1. 100% branded and high quality product
2. Input voltage  :  0.9V to 5V
3. Output voltage :  5V
4. Led indicator
5. Mini PFM control
6. High conversion efficiency

12V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

TCS3200 Color Recognition Sensor Module

Specification

1. Sensor Type: Color Recognition Sensor (TCS3200).
2. Voltage Range: 2.7V - 5.5V.
3. Output Formats: RGB, HSV, and Grayscale.
4. Compact and Lightweight Module.

OV7670 Camera Image sensor module

Specifications:-

1. Photosensitive Array: 640 x 480.
2. IO Voltage: 2.5V to 3.0V.
3. Operating Power: 60mW/15fpsVGAYUV.
4. Sleeping Mode: <20μA
5. Lens Size: 1/6″.
6. Vision Angle: 25 degrees.
7. Max. Frame Rate: 30fps VGA.
8. Electronic Exposure: 1 to 510 row.
9. Pixel Coverage: 3.6μm x 3.6μm.
10. Duck Current: 12 mV/s at 60℃.

4.5V to 35V DC PWM Speed Controller Mini Electrical Motor Control Switch LED Dimmer Module

Specification:-

1. Operating voltage: DC 4.5V to 35V
2. Control power: 90W (maximum)
3. Quiescent current: 0.015A (standby)
4. PWM duty cycle: 1% -100%
5. PWM frequency: 10khz
6. Size: 29mm*23mm
7. Total height: 15mm

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier module pack of 1pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power  :  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

Water Sensor Module for Arduino Moisture / Drop / Depth of Water Test - Red

Features:-

1. Sensor Type: Water sensor module.
2. Purpose: Detects moisture, water depth, or water drops.
3. Compatibility: Designed for Arduino and similar platforms.
4. Color: Red.
5. Versatile for various water-related applications in DIY electronics and projects.

TP4056 Micro USB 5V 1A Lithium battery charging module (b-type) pack of 1pcs

Specifications:-

1. Input supply voltage: -0.3V to 8V
2. Short-Circuit Duration: Continuous
3. BAT Pin Current: 1200 mA
4. PROG Pin Current: 1200 uA

DC-DC 0.9V to 5V Converter USB Step Up Power Boost Module Mini PFM Control pack of 1pcs

Specification:-

1. 100% branded and high quality product
2. Input voltage  :  0.9V to 5V
3. Output voltage :  5V
4. Led indicator
5. Mini PFM control
6. High conversion efficiency

Laser Transmitter Module For Arduino AVR PIC

Specifications 

1. Operating Voltage: 5V.
2. Output Power: 5mW.
3. Wavelength: 650nm (red laser).
4. Suitable for Arduino, AVR, and PIC microcontroller projects.

5V 1 channel relay module compatible with 5V microcontroller

Specification:-

1. Number of channels: 1
2. Supply voltage: 3.75V to 6V
3. Quiescent current: 2mA
4. Trigger voltage: 5V
5. Trigger current: 20mA
6. Current when the relay is active: 70mA
7. Relay maximum contact voltage: 250V AC or 30V DC
8. Relay maximum current:  10A

RepRap Stepper Motor Driver Module A4988

Specifications:-

• Minimum operating voltage: 8V
• Maximum operating voltage: 35V
• Continuous current per phase: 1 Amp
• Maximum current per phase: 2 Amp
• Minimum logic voltage: 3V
• Maximum logic voltage: 5.5V
• Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16

MQ-2 Flammable gas and smoke detection sensor module

Specifications:-

1. Operating voltage:  5V DC
2. Interface type:  Analog and Digital
3. High sensitivity to smoke and combustible gasses like Hydrogen, LPG & Propane.
4. Low Cost
5. Stable & Long Life.
6. Board Power indication

MQ-3 Alcohol Ethanol and Breath gas detection module for Arduino

Specifications:-

1. IC name : LM393
2. Operating voltage : DC 3V to 5V
3. Response time: ≤10s (70% Response)
4. Recovery time: ≤30s (70% Response)
5. Heating resistance: 31Ω±3Ω
6. Heating current: ≤180mA
7. Heating voltage: 5V±0.2V
8. Heating power: ≤900mW
9. Detect voltage: ≤15V
10. Ambient temperature: -10℃ to 65℃
11. Humidity: ≤95%RH

Digital Capacitive Touch Switch Module For Arduino - TTP223B

Specifications:-

1. Power supply voltage(VCC): 2.0, 3, 5.5 V.
2. Output high VOH: 0.8VCC V
3. Output low VOL: 0.3VCC V
4. Response time (touch mode): 60 mS
5. Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
6. Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
7. Response time (low power mode): 220 mS
8. Size : 2.4 x 2.4

Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino

Specifications:-

1. Connects to Arduino using standard SPI pins.
2. Supports Micro SD and TF card formats.
3. Includes a built-in voltage level shifter for 5V and 3.3V systems.
4. Easily interfaces with Arduino for data storage and retrieval.

Flame Sensor infrared receiver ignition source detection module

Specifications:-

1. Output channel : 1
2. Power supply : 3.5V to 5V
3. High Photo Sensitivity
4. Fast Response Time
5. Sensitivity adjustable
6. Working voltage : 3.3V to 5V
7. Detect range : 60 degrees
8. Digital/Analog output
9. On-board LM393 chip

GD4142 Dual USB 5V 1A DC to DC step up booster power bank charging modules pack of 10pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on back
6. Intelligent automatic shutdown

12V 2 channel relay module with light coupling

Specification:-

1. Number of channels : 2
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducer Sensor DC 5V 2-450cm

Specification:-

1. Operating voltage: 5V DC
2. Operating current: 15mA
3. Measure angle: 15°
4. Ranging distance: 2cm - 400cm
5. Working frequency: 40Hz
6. Trigger input signal: 10uS TTL pulse
7. Echo output signal: Input TTL lever signal and the range in proportion
8. Working voltage : 5V(DC)
9. Static current: Less than 2mA.
10. Output signal: Electric frequency signal, high-level 5V, low-level 0V.

R307 Optical Fingerprint Reader Sensor Module

Specification:-

1. Type: Optical
2. Sensor Life: 100 million times
3. Static indicators: 15KV
4. RS232 communication baud rate: 9600BPS~115200BPS changeable
5. Image Capture Surface 20*15(mm)
6. Verification Speed:  0.2 sec
7. Scanning Speed: 0.3 sec
8. Character file size:  256 bytes

Microphone Sound Sensor, Voice Sensor High Sensitivity Sound Detection, Whistle Module

Specification:-

1. Operating voltage : 3.3V to 5V DC
2. LM393 comparator with threshold preset
3. Induction distance: 0.5 Meter
4. Operating current:  4 to 5 mA
5. Microphone sensitivity (1kHz): 52 to 48 dB
6. Easy to use with Microcontrollers or even with normal Digital/Analog IC

2.4 Inch TFT LCD Shield ILI9341 HX8347 240*320 Touch Board 65K RGB Color Display Module.

Specification:-

1. Display Type: 2.4-inch TFT LCD.
2. Resolution: 240x320 pixels.
3. Controller Chips: ILI9341 and HX8347.
4. Color Depth: 65,536 colors (RGB).

ACS712 - 5A range Current detector Sensor Module

Specifications:-

1. Module Dimensions: 31 x 13 x 14 mm (LxWxH)
2. Weight: 3 gm.
3. Supply Voltage: 4.5V~5.5V DC
4. Measure Current Range: -5A~ 5A
5. Sensitivity: 66mV/A
6. The current sensor chips: ACS712_ELC-05B.
7. Pin 5V power supply, on-board power indicator.

3 USB 5V 1A Mobile power bank charger controllers modules pack of 50pcs

Specification:-

1. Charging Voltage:  5V DC
2. Charging Current:  1000mA or 1A
3. LED indication is provided
4. USB Output Voltage:  DC 5V
5. USB Output Current:  1200mA
6. Charging Interface  : 3 Micro USB port

3 USB 5V 1A Mobile power bank charger controller modules pack of 10pcs

Specification:-

1. Charging Voltage  :  5V DC
2. Charging Current  :  1000mA or 1A
3. LED indication is provided
4. USB Output Voltage  :  DC 5V
5. USB Output Current  :  1200mA
6. Charging Interface  : 3 Micro USB port

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 10pcs

Specification:-

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power:  10W+10W
4. Chip name:  PAM8610
5. Efficiency:  90%
6.  Frequency response:  20Hz to 50KHz

LM2596 DC to DC Buck Converter Adjustable Step down power supply module pack of 1pcs

Specifications:-

1. Input voltage : 3V to 40V
2. Output voltage : 1.5V to 35V(Adjustable)
3. Output current : 2A to 3A
4. Module Properties : non-isolated constant voltage module
5. Rectification : non-synchronous rectification
6. Short circuit protection : current limiting

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 50pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

SIM800L GPRS GSM Module for Arduino

Specifications:

• Chip: SIM800L
• Voltage: 3.7-4.2V
• Module size: 2.5cmx2.3cm
• TTL serial port for serial port
• Power module automatically boot, homing network
• Onboard signal lights all the way . It flashes slowly when there is a signal, it flashes quickly when there is  no signal

TCRT5000 Dual Channel Line Tracking sensor module

Specifications:-

1. Module model : TCRT5000
2. Working voltage : DC 3.5V to 5V
3. Output channel : 0/1
4. Detect distance : 1-25mm
5. Focal distance : 2.5mm
6. IC name : LM393
7. Inbuilt indicator light
8. Also, built in potentiometer for sensitivity

T6845-B Power bank charging circuit modules pack of 50pcs

Specification:-

• Charging Voltage:  5V DC
• Charging Current:  1mA
• LED indication
• USB Output Voltage:  DC5V
• USB Output Current:  1200mA
• Charging Interface:  Micro USB port
• Use Battery :- 18650, 3.7V, 12000mah

Dual USB Output 5V 2.1A Power bank charging modules with digital 7 segment display indicators pack of 50pcs

Specifications:

• Material: Alloy.
• Type: Single screwdriver.
• Handle PVC Molded.
• Total length: 130 mm.
• External rod length: 75 mm.
• Rod thickness: 3 mm.
• Weight: 15 gms.

12V Bluetooth MP3 USB charging port FM radio player and decoder modules with Remote pack of 10pcs

Specification:-

1. Working voltage:  12V
2. Support:  mp3/Bluetooth/USB/aux/FM/memory card/USB charging
3. Excellent sound quality
4. Supports USB cable for charging purposes
5. Cheap and easy to install
6. Remote for easy handling

Bluetooth MP3 USB FM radio player and decoder modules with Remote pack of 10pcs

Specification:-

1. Working voltage  :  5V
2. Support  :  mp3/bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Convenient
5. Cheap and easy to install
6. Remote for easy handling

TP4056 5V 1A 18650 Lithium Battery Charging modules (C-TYPE) pack of 10pcs

Specification:-

1. Input voltage  :  5V
2. Charging cut-off voltage  :  4.2V
3. Maximum charging current  :  1000mA
4. Battery over-discharge protection voltage  :  2.5V
5. Battery overcurrent protection current  :  3

JZ6864 Single USB 5V 1A Power bank charging modules pack of 50pcs

Specification:-

1. Charging Voltage:  5V
2. Charging Current:  1mA
3. LED indication
4. USB Output Voltage:  5V/2A
5. Dimensions: 71.5 x 18mm
6. Charging Interface:  Micro USB port
7. The battery must be connected in parallel rather than in series.

GD4142 Dual USB 5V 1A DC to DC step up boosters power bank charging modules pack of 50pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on back
6. Intelligent automatic shutdown

Wireless HI-FI boombox circuit modules with in-built bluetooth and 5 watt amplifier for direct speaker pack of 50pcs

Specification

1. Working voltage:  5V
2. Output current:  5 Watt
3. Support  :  mp3/bluetooth/USB/aux/FM
4. Excellent sound quality
5. Convenient
6. Cheap and easy to install

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier modules pack of 10pcs

Specification

1. Operating voltage:  12V to 24V
2. Output Power:  30W+30W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Supply current  :  more than 3A

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier modules pack of 50pcs

Specification

1. Operating voltage:  12V to 24V
2. Output Power:  30W+30W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Supply current  :  more than 3A

Wireless HI-FI boombox circuit modules with in-built bluetooth and 5 watt amplifier for direct speaker pack of 10pcs

Specification

1. Working voltage:  5V
2. Output current:  5 Watt
3. Support  :  mp3/bluetooth/USB/aux/FM
4. Excellent sound quality
5. Convenient
6. Cheap and easy to install

JZ6864 Single USB 5V 1A Power bank charging modules pack of 10pcs

Specification:-

1. Charging Voltage:  5V
2. Charging Current:  1mA
3. LED indication
4. USB Output Voltage:  5V/2A
5. Dimensions: 71.5 x 18mm
6. Charging Interface:  Micro USB port
7. The battery must be connected in parallel rather than in series.

DC-DC 0.9V to 5V Converters USB Step Up Power Boost Modules Mini PFM Control pack of 50pcs

Specification:-

1. 100% branded and high-quality product
2. Input voltage:  0.9V to 5V
3. Output voltage:  5V
4. Led indicator
5. Mini PFM control
6. High conversion efficiency

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 10pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

T6845-B Power bank charging circuit modules pack of 10pcs

Specification:-

• Charging Voltage:  5V DC
• Charging Current:  1mA
• LED indication
• USB Output Voltage:  DC5V
• USB Output Current:  1200mA
• Charging Interface:  Micro USB port
• Use Battery :- 18650, 3.7V, 12000mah

12V Bluetooth MP3 USB charging port FM radio player and decoder module with Remote pack of 1pcs

Specification

1. Working voltage  :  12V
2. Support  :  mp3/bluetooth/USB/aux/FM/memory card/USB charging
3. Excellent sound quality
4. Supports USB cable for charging purposes
5. Cheap and easy to install
6. Remote for easy handling

TP4056 5V 1A 18650 Lithium Battery Charging modules (C-TYPE) pack of 50pcs

Specification:-

1. Input voltage  :  5V
2. Charging cut-off voltage  :  4.2V
3. Maximum charging current  :  1000mA
4. Battery over-discharge protection voltage  :  2.5V
5. Battery overcurrent protection current  :  3

Wireless HI-FI Bluetooth MP3 USB FM player module with remote and stereo 5W+5W output for speakers pack of 10pcs

Specification:-

1. Working voltage  :  5V
2. Support  :  mp3/bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Can connect speakers directly
5. Cheap and easy to install
6. Remote for easy handling

99mm x 69mm 6V 180mAh rectangle shape polycrystalline mini epoxy solar panel pack of 1pcs

Specification:-

1. High-quality product
2. 100% user satisfaction
3. High quality polycrystalline solar panel
4. Output voltage : 6V
5. Current range : 180mAh
6. Durable construction
7. Resistance to moisture and environmental pollutants

80mm x 40mm 6V 60mAh rectangle shape polycrystalline mini epoxy solar panels pack of 10pcs

Specification:-

1. High-quality product
2. 100% user satisfaction
3. High quality polycrystalline solar panel
4. Output voltage : 6V
5. Current range : 60mAh
6. Durable construction
7. Resistance to moisture and environmental pollutants

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 50pcs

Specification

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power  :  10W+10W
4. Chip name  :  PAM8610
5. Efficiency  :  90%
6.  Frequency response  :  20Hz to 50KHz

Dual USB Output 5V 2.1A 1A Power bank charging modules with digital LCD display indicators pack of 50pcs

Specification:-

1. Equipped with dual USB 5V 2.1A 1A output
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Intelligent automatic shutdown
5. Smart power output
6. Push button switch control on/off,

TG113 Bluetooth speaker circuit board modules pack of 50pcs

Specification

1. New and improve microchip technology
2. Working voltage  :  3.7V-5V DC
3. Inbuilt sound sensor or mic for recording purposes
4. Support  :  mp3/bluetooth/USB/aux/FM
5. Push buttons for easy handling
6. Excellent sound quality
7. Widely use in portable speakers
8. Can drive a normal speaker directly

12V 2W Bright blue color waterproof LED module pack of 20pcs

Specification

1. Operating voltage : 12V
2. Emerging color : Blue
3. Power rating : 2Watt
4. Dimensions of the module : 70mm x 18mm (L x B)
5. LED junction temperature : 125°C

12V 2W Bright pink color waterproof LED module pack of 20pcs

Specification:-

1. Operating voltage : 12V
2. Emerging color : pink
3. Power rating : 2Watt
4. Dimensions of the module : 70mm x 18mm (L x B)
5. LED junction temperature : 125°C

12V 2W Bright pink color waterproof LED module pack of 60pcs

Specification

1. Operating voltage : 12V
2. Emerging color : pink
3. Power rating : 2Watt
4. Dimensions of the module : 70mm x 18mm (L x B)
5. LED junction temperature : 125°C