Combo of SG90 Micro Servo Motor with Multicolor Jumper Wire Cable Set

Specification:-

• Model: SG90
• Rotation: 0°-180°
• Operating voltage:  3V to 7.2V
• Recommended voltage: 5V
• Gear type: Hard plastic
• Jumper cable length: 200 mm
• High-Quality Material
• Male to Male, Female to Female, Male to Female Jumper wire

Package Includes - 1pcs SG90 Servo Motor and Jumper Wire Cable (Male To Male, Female To Female, Male To Female)-(10pcs Each)

PWM DC Motor Speed Controller Speed Switch Module 6V/12V/24V/28V 3A 1203B

Specification:-

• Model: 1203B
• Input Voltage: 6V–28V DC
• Output Current: Max 3A continuous
• Control Method: PWM (Pulse Width Modulation)
• Speed Adjustment: Rotary potentiometer (knob)
• Compact & lightweight PCB design

4.5V to 35V DC PWM Speed Controller Mini Electrical Motor Control Switch LED Dimmer Module

Specification:-

1. Operating voltage: DC 4.5V to 35V
2. Control power: 90W (maximum)
3. Quiescent current: 0.015A (standby)
4. PWM duty cycle: 1% -100%
5. PWM frequency: 10khz
6. Size: 29mm*23mm
7. Total height: 15mm

UNO R3 AVR USB Development board with ATMEG16U2 microcontroller chip

Specification:-

1. Model name : UNO Rev3
2. Chip name : ATmega16U2
3. Operating voltage : 5V
4. Recommended voltage range : 5V to 12V
5. Digital input/output pins : 14 (of which 6 provide PWM output).
6. Analog input/output pins : 6

5V 1 channel relay module compatible with 5V microcontroller

Specification:-

1. Number of channels: 1
2. Supply voltage: 3.75V to 6V
3. Quiescent current: 2mA
4. Trigger voltage: 5V
5. Trigger current: 20mA
6. Current when the relay is active: 70mA
7. Relay maximum contact voltage: 250V AC or 30V DC
8. Relay maximum current:  10A

RepRap Stepper Motor Driver Module A4988

Specifications:-

• Minimum operating voltage: 8V
• Maximum operating voltage: 35V
• Continuous current per phase: 1 Amp
• Maximum current per phase: 2 Amp
• Minimum logic voltage: 3V
• Maximum logic voltage: 5.5V
• Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16

3 USB 5V 1A Mobile power bank charger controllers modules pack of 50pcs

Specification:-

1. Charging Voltage:  5V DC
2. Charging Current:  1000mA or 1A
3. LED indication is provided
4. USB Output Voltage:  DC 5V
5. USB Output Current:  1200mA
6. Charging Interface  : 3 Micro USB port

3 USB 5V 1A Mobile power bank charger controller modules pack of 10pcs

Specification:-

1. Charging Voltage  :  5V DC
2. Charging Current  :  1000mA or 1A
3. LED indication is provided
4. USB Output Voltage  :  DC 5V
5. USB Output Current  :  1200mA
6. Charging Interface  : 3 Micro USB port

3D Printer Controller RAMPS 1.4

Specification:-

1. Compatibility: For use with 3D printers.
2. Input Voltage: 12-24V DC.
3. Versatile: Supports stepper drivers, heated beds, and more.
4. User Interface: Includes LCD screen and encoder.

Flexible RGB LED Strip 2835 Light-Color Changing Decoration Light with IR Controller (5M)

Common applications:

1. Wall lighting using LED strip light.
2. Back lighting of LCD Screens using LED strip light.
3. Car Light using LED strip light.
4. Holiday Lighting using LED tape light.
5. Stage Design Lighting using LED light ribbon.

RGB controller multifunctional

Specifications:

• Working temperature:- 20-60 °C
• Supply voltage:- DC 5-24V
• Changing mode:- 29 modes
• Remote distance:- 100m
• Bright adjust:- 8 levels
• Speed adjust:- 8 levels
• Net weight:- 175g
• Gross weight:- 205g
• Max output current:- 8A per channel

Dimmable LED Light Dimmer switch brightness manual adjustable controller pack of 10pcs

Specifications:-

1. Working voltage : 12V to 24V
2. No of positions : 7
3. Contact resistance : 20m Ω
4. Insulation resistance  :  1000 Ω
5. Hard plastic body
6. Highly insulated

HT12E Encoder DIP 18 pins IC for remote control system pack of 50pcs

Specification

1. Function : DIP Encoder IC
2. Number of pin : 18
3. Operating voltage range : 2.4V to 12V
4. Data code has positive polarity
5. Low standby current : 0.1µA at 5V
6. Built-in oscillator
7. Low power and high noise immunity

M57962L 12 pin hybrid IC for driving IGBT modules

Specification

1. Supply voltage: 12V DC
2. Driver configuration: low slide
3. Peak output current : 5A
4. Input delay : 1µs
5. Output delay : 1µs
6. Output current : 0.5A

78L05 Voltage regulator transistor pack of 20pcs

Specification:-

1. Transistor type  :  78L05 Voltage regulator transistor
2. Output Current  :  100mA
3. Maximum Input Voltage  :  30V
4. Operating current  :  5mA

MPR121 V12 Capacitive touch sensor controller module

Specification:-

1. Operating voltage  :  2.5V to 3.6V DC
2. 29μA supply current at 16ms sample period
3. Shutdown current  :  3μA
4. 12 electrodes
5. Operating temperature range  :  -40°C to +85°C

3 USB 5V 1A Mobile power bank charger controller module pack of 1pcs

Specification:-

1. Charging Voltage:  5V DC
2. Charging Current:  1000mA or 1A
3. LED indication is provided
4. USB Output Voltage:  DC 5V
5. USB Output Current:  1200mA
6. Charging Interface  : 3 Micro USB port

Dual channel 12V DC bass and treble controller circuit board

Specification:-

1. Input power  :  12V DC
2. Dual channel
3. Produce high and rich sound
4. Passive design
5. Can be connected in front of the amplifier
6. Lightweight and easy to install
7. Proper knowledge is mandatory

Viper22A GF138022 SMPS power supply controller DIP 8 pin IC pack of 2pcs

Specifications:-

1. SMPS switching controller IC
2. AC to DC converter
3. Operating voltage: 9V to 30V
4. Oscillator frequency:  60 kHz typically
5. Mosfet drain to source voltage:  730V
6. Off-state drain current:  0.1mA

Viper22A GF138022 SMPS power supply controller DIP 8 pins IC pack of 10pcs

Specifications

1. SMPS switching controller IC
2. AC to DC converter
3. Operating voltage : 9V to 30V
4. Oscillator frequency  :  60 kHz typically
5. Mosfet drain to source voltage :  730V
6. Off-state drain current:  0.1mA

Viper22A GF138022 SMPS power supply controller DIP 8 pins IC pack of 50pcs

Specifications

1. SMPS switching controller IC
2. AC to DC converter
3. Operating voltage : 9V to 30V
4. Oscillator frequency  :  60 kHz typically
5. Mosfet drain to source voltage :  730V
6. Off-state drain current:  0.1mA

UC3843AN PWM current mode controller DIP 8 pin IC pack of 2pcs

Specification

1. PWM controller
2. Operating Voltage:  7V to 8V
3. Output pin current :  1A
4. Analog input range  :  -0.3V to 6.3V
5. Oscillation Frequency :  52 approx.
6. Gain value  :  3V
7. Maximum source current :  22mA

UC3843AN PWM current mode controller DIP 8 pins IC pack of 10pcs

Specification

1. PWM controller
2. Operating Voltage :  7V to 8V
3. Output pin current :  1A
4. Analog input range  :  -0.3V to 6.3V
5. Oscillation Frequency :  52 approx.
6. Gain value  :  3V
7. Maximum source current :  22mA

UC3843AN PWM current mode controller DIP 8 pins IC pack of 50pcs

Specification

1. PWM controller
2. Operating Voltage :  7V to 8V
3. Output pin current :  1A
4. Analog input range  :  -0.3V to 6.3V
5. Oscillation Frequency :  52 approx.
6. Gain value  :  3V
7. Maximum source current :  22mA

UC3845BN Current mode PWM controller DIP 8 pin IC pack of 2pcs

Specification

1. Input voltage  : 15V
2. Output voltage : 5V
3. Output current : 200mA
4. Controller IC case style :  DIP
5. Number of pins : 8 pins
6. Frequency range : 150 to 250 KHz

UC3845BN Current mode PWM controller DIP 8 pins IC pack of 10pcs

Specification

1. Input voltage: 15V
2. Output voltage: 5V
3. Output current: 200mA
4. Controller IC case style:  DIP
5. Number of pins: 8 pins
6. Frequency range: 150 to 250 KHz

UC3845BN Current mode PWM controller DIP 8 pins IC pack of 50pcs

Specification

1. Input voltage: 15V
2. Output voltage: 5V
3. Output current : 200mA
4. Controller IC case style :  DIP
5. Number of pins : 8 pins
6. Frequency range : 150 to 250 KHz

UC3842AN Current mode PWM controller DIP 8 pin IC pack of 2pcs

Specification

1. Input voltage  : 30V
2. Output voltage : 5V
3. Output current : 1A
4. Number of pins : 8 pins
5. Frequency range : 500 KHz

UC3842AN Current mode PWM controller DIP 8 pins IC pack of 10pcs

Specification

1. Input voltage  : 30V
2. Output voltage : 5V
3. Output current : 1A
4. Number of pins : 8 pins
5. Frequency range : 500 KHz

UC3842AN Current mode PWM controller DIP 8 pins IC pack of 50pcs

Specification

1. Input voltage  : 30V
2. Output voltage : 5V
3. Output current : 1A
4. Number of pins : 8 pins
5. Frequency range : 500 KHz

PJ494CD Switch mode PWM control circuit DIP 16 pin IC pack of 2pcs

Specification

1. Complete PWM Power Control Circuitry
2. Supply voltage: 20V to 40V
3. Collector output current: 250mA
4. Oscillator frequency:  300 KHz
5. Output voltage:  5V
6. Load regulation: 15mV

PJ494CD Switch mode PWM control circuit DIP 16 pins IC pack of 10pcs

Specification

1. Complete PWM Power Control Circuitry
2. Supply voltage : 20V to 40V
3. Collector output current : 250mA
4. Oscillator frequency :  300 kHz
5. Output voltage :  5V
6. Load regulation : 15mV

PJ494CD Switch mode PWM control circuit DIP 16 pins IC pack of 50pcs

Specification

1. Complete PWM Power Control Circuitry
2. Supply voltage: 20V to 40V
3. Collector output current : 250mA
4. Oscillator frequency :  300 KHz
5. Output voltage :  5V
6. Load regulation : 15mV

SG3525A Pulse width modulation controller DIP 16 pin IC pack of 2pcs

Specification

1. Type: Pulse width modulation controller
2. Supply voltage:  8V to 35V
3. Frequency range : 100 to 400 KHz
4. Max. power dissipation :  1000mW
5. Pulse shutdown capability
6. External oscillator synchronization pin

SG3525A Pulse width modulation controller DIP 16 pins IC pack of 10pcs

Specification

1. Type : Pulse width modulation controller
2. Supply voltage :  8V to 35V
3. Frequency range : 100 to 400 KHz
4. Max. power dissipation :  1000mW
5. Pulse shutdown capability
6. External oscillator synchronization pin

SG3525A Pulse width modulation controller DIP 16 pins IC pack of 50pcs

Specification

1. Type : Pulse width modulation controller
2. Supply voltage :  8V to 35V
3. Frequency range : 100 to 400 KHz
4. Max. power dissipation :  1000mW
5. Pulse shutdown capability
6. External oscillator synchronization pin

SN74HC04N Hex inverters low power DIP 14 pins IC pack of 50pcs

Specification

1. Consist of six independent inverters
2. Supply voltage range: 2V to 6V
3. Input clamp current : 20mA
4. Power dissipation capacitance per inverter (no loads) : 20pF
5. Continuous output current : 50mA
6. Low Power Consumption : 20-µA

TM1628 Digital LED display driver 28 pins IC pack of 50pcs

Specification

1. Advance technology
2. Supply voltage: 5V to 7V
3. Logic input voltage: -0.5 to VD D + 0.5
4. Logic supply voltage: 4.5V to 5.5V
5. Low power consumption
6. Multi-display modes
7. Key scanning (8 x 2 matrix)

DS12C887 Real time clock low power DIP 18 pin IC

Specification

1. Type: Clock/Calendar
2. Supply voltage: 4.5V to 5.5V
3. Power supply current : 15mA
4. Memory size : 114 bytes
5. Time format : HH:MM: SS (12/24 hr)
6. Date format: YY-MM-DD-dd
7. Interface: Parallel
8. 12 or 24-hour clock with AM and PM in 12-hour mode

MAX705 Supervisory circuits power supply monitor with reset DIP 8 pin IC

Specification:-

1. Operating voltage range: 2V to 5.5V
2. Supply current: 150 µA
3. Reset threshold: 4.5V
4. Reset threshold hysteresis: 40mV
5. Reset pulse width: 280ms
6. Watchdog timeout period: 1.00 to 2.25 seconds

ATMEGA48PA 8-bit AVR Microcontroller with 4/8/16K8/16K bytes In-system DIP 28 pin IC

Specification

1. Core Size: 8-bit
2. Speed:  20MHz
3. Program memory size : 4KB
4. Program memory type :  Flash
5. EEPROM size : 256 x 8
6. RAM size : 512 x 8
7. Supply voltage : 1.8V to 5.5V

HCNR200 High linearity analog optocouplers DIP 8 pin IC

Specification

1. Output type: Photodiode
2. Number of channels: 1
3. Isolation voltage: 5kV
4. If - Forward Current: 20 mA
5. Vf - Forward Voltage:  1.6 V
6. Power Dissipation: 60 mW

ATMEGA328P 8-bit Microcontroller 32KB In-system Flash 20MHz 28 pin IC

Specification:-

1. Supply voltage range: 1.8V to 5.5V
2. Embedded interface type :  I2C, SPI, UART
3. CPU speed: 20MHz
4. Program memory size: 32KB
5. RAM memory size: 2KB
6. Number of pins: 28 pin

ATMEGA8L-8PU 8 bit Microcontrollers with 8kB in system programable flash DIP 28 pin IC

Specification

1. Core type: AVR
2. Program memory size: 8KB
3. Data bus width: 8 bit
4. RAM size: 1KB
5. Supply voltage range: 2.2V to 5.5V
6. Number of pins: 28
7. CPU speed:  8MHz

AT89C4051-24PU 8-bit Microcontroller with 4K Bytes Flash DIP 20 pin IC

Specification

1. Core size: 8 bit
2. CPU speed: 24MHz
3. Supply voltage range: 2.7V to 6V
4. Program memory size: 4KB
5. Program memory type: flash
6. RAM size: 128 byte
7. Timer resolution: 16 bit

PIC16F886 Enhanced flash based 8 Bit Microcontrollers with Nano watt technology DIP 28 pin IC

Specification

1. Program memory type: flash
2. Program memory size: 14KB
3. RAM size : 368bytes
4. Supply voltage : 2.2V to 5.5V
5. Power dissipation : 800mW
6. Communication interface : Serial

MCP23017 16 Bit I/O Expander with serial interface DIP 28 pin IC

Specification

1. Chip configuration : 16bit
2. Bus frequency : 1.7MHz
3. IC Interface type : serial
4. Supply voltage : 1.8V to 5.5V
5. Standby current : 1uA
6. High speed SPI interface

XTR105P 4 to 20mA Current transmitter with Sensor excitation and linearization DIP 14 pin IC

Specification

1. Supply voltage range : 7.5V to 36V
2. IC type : Current transmitter
3. Current supply : 20mA
4. Interface : 3 wire
5. Two precision current source
6. Low offset drift
7. Low output current noise

MCP3008 8 Channel 10 Bit A/D converter with SPI serial interface DIP 16 pin IC

Specification

1. 8 Channel 10-bit ADC IC
2. Supply voltage range: 2.7V to 5.5V
3. Max sample rate : 200ksamples/sec
4. Low power
5. Resolution : 10 bits
6. Conversion time : 10 clock cycles
7. Max. supply current : 500µA

DS1210 Nonvolatile controller DIP 8 pin IC chip

Specification

1. Supply voltage range: 4.7V to 5.5V
2. Supply current: 5mA
3. Controller type : Nonvolatile RAM
4. Input leakage : 1.0µA
5. Consumes less than 100nA battery current
6. Supports redundant batteries
7. Low forward voltage

PIC18F2550 High-Performance enhanced flash USB Microcontroller with Nano watt technology DIP 28 pin IC

Specification

1. Operating supply voltage: 4.2V to 5.5V
2. Number of ADC units: 1
3. Timer resolution: 8bit and 16bit
4. Program memory type: flash
5. Ram size: 2.048kb
6. CPU speed: 12MIPS
7. Communication interface: serial

MCP23S17 16 Bit I/O Expander with serial interface DIP 28 pin IC

Specification

1. Chip configuration : 16bit
2. Bus frequency : 10MHz
3. IC Interface type : serial
4. Supply voltage : 1.8V to 5.5V
5. Standby current : 1uA
6. High speed SPI interface

INA125P Instrumentation amplifier with precision voltage reference DIP 16 pin IC

Specification

1. Wide supply range:-
   • Single supply voltage : 2.7V to 36V
   • Dual supply voltage : 1.3v to 18V
2. Number of amplifier : 2
3. Input offset voltage :  250µV
4. Bandwidth : 150KHz
5. Slew rate :  0.02V/µs
6. Amplifier output : single-ended

TINY13A 8 bit Microcontroller with 1K bytes in system programmable flash DIP 8 pin IC

Specification

1. Operating voltage range : 1.8V to 5.5V
2. Number of I/O pins : 8
3. ADC module : 10 bit (4 Channel)
4. Timer module : 8bit
5. Internal oscillator : 9.6MHz
6. Program memory : 1KB
7. CPU speed : 20 MIPS

TOP244YN Extended power Flexible design, Eco-Smart, integrated off-line switcher 6 pin IC

Specification

1. Input supply voltage AC : 85V to 265V
2. Switching frequency : 66kHz - 132kHz
3. Output voltage : 12V
4. Operating supply current : 1.6mA
5. Drain voltage : 0.3V to 700V
6. Drain peak current : 2.16A
7. Type : Off line convertor
8. Extended power range
9. Wide duty cycle

TOP250YN Extended power Flexible design, Eco-Smart, integrated off-line switcher 6 pin IC

Specification

1. Input supply voltage AC: 85V to 265V
2. Switching frequency: 66kHz - 132kHz
3. Output voltage : 12V
4. Operating supply current : 1.6mA
5. Drain voltage : 0.3V to 700V
6. Drain peak current : 10.08A
7. Type : Off line convertor
8. Extended power range
9. Wide duty cycle

TOP243YN Extended power Flexible design, Eco-Smart, integrated off-line switcher 6 pin IC

Specification

1. Input supply voltage AC : 85V to 265V
2. Switching frequency : 66kHz - 132kHz
3. Output voltage : 12V
4. Operating supply current : 1.6mA
5. Drain voltage : 0.3V to 700V
6. Drain peak current : 1.44A
7. Type : Off line convertor
8. Extended power range
9. Wide duty cycle

TOP245YN Extended power Flexible design, Eco-Smart, integrated off-line switcher 6 pin IC

Specification

1. Input supply voltage AC: 85V to 265V
2. Switching frequency: 66kHz - 132kHz
3. Output voltage : 12V
4. Operating supply current : 1.6mA
5. Drain voltage : 0.3V to 700V
6. Drain peak current : 2.88A
7. Type : Off line convertor
8. Extended power range
9. Wide duty cycle

TOP246YN Extended power Flexible design, Eco-Smart, integrated off-line switcher 6 pin IC

Specification

1. Input supply voltage AC: 85V to 265V
2. Switching frequency: 66kHz - 132kHz
3. Output voltage : 12V
4. Operating supply current : 1.6mA
5. Drain voltage : 0.3V to 700V
6. Drain peak current : 4.32A
7. Type : Off line convertor
8. Extended power range
9. Wide duty cycle

TOP249YN Extended power Flexible design, Eco-Smart, integrated off-line switcher 6 pin IC

Specification

1. Input supply voltage AC : 85V to 265V
2. Switching frequency : 66kHz - 132kHz
3. Output voltage : 12V
4. Operating supply current : 1.6mA
5. Drain voltage : 0.3V to 700V
6. Drain peak current : 8.64A
7. Type : Off line convertor
8. Extended power range
9. Wide duty cycle

STC3028 12V DC Dual LED display temperature and humidity controller thermostat with Probe

Specification

1. Power supply range: 12V DC
2. Measurement temperature range:  -20°C to +100°C
3. Measuring humidity range : 0%RH to +100%RH
4. Accuracy : ±1°C 0.1%RH
5. Relay output contact capacity :  10A

STC1000 10A 110V to 220V AC LED display temperature controller thermostat with attach probe

Specification

1. Power supply range: 110V to 220V AC
2. Measurement temperature range:  -50°C to +99°C
3. Resolution : 0.1°C;
4. Accuracy : ±1°C (-50 – 70°C)
5. Sensor error delay : 1 minute
6. Power consumption : ≤3W
7. Sensor : NTC sensor

XH-M452 10A Dual LED display temperature and humidity controller module

Specification

1. Power supply range: 12V DC
2. Measurement temperature range:  -40 to +60°C
3. Measuring humidity range : 0%RH to +99%RH
4. Accuracy : ±05°C 3%RH
5. Relay output contact capacity :  10A

HW-W3001 220V AC 1500W Digital LED display temperature controller thermostat with attach probe

Specification:-

1. Power supply range: 110V to 220V AC
2. Rated power: 1500W
3. Rated current: 10Amp
4. Measurement temperature range :  -50°C to +110°C
5. Control accuracy: 0.1°C
6. Measuring accuracy: ±0.2℃

XM-18 180V to 240V AC 10A Four LED display automatic computer control incubator controller

Specification

1. Operating supply range: 180V to 240V AC
2. Temperature measuring range : 0°C  to 99°C
3. Temperature measurement accuracy :  ±0.1
4. Humidity measurement range : 0% to 99%RH
5. Humidity accuracy : ±3%RH
6. Multi-function incubator
7. Digital displaying of temperature and humidity

XH-W1219 10A 12V DC Dual LED display temperature and humidity controller thermostat module with Probe

Specification:

• Control range :  -50°C to 110 °C
• Control precision :  0.1 °C
• High temperature alarm : -49~110 °C
• Input voltage :  DC 12V
• Output type :  Relay output 10A (max)
• Return difference setting : 0.1°C to 30 °C

XH-W1209 10A 12V DC LED display temperature controller thermostat module with probe

Specification

1. Temperature Control Range: -50°C to +110°C
2. Resolution : -9.9°C to +99.9°C
3. Resolution at all temperatures :  1°C
4. Accuracy :  0.1°C
5. Refresh rate : 0.5s
6. Supply voltage :  12V DC
7. Measuring inputs :  NTC10K

150watt High quality Industrial grade heavy duty hot melt glue gun with copper nozzle and temperature controller

Specification:-

1. Operating voltage range : 100V to 240V AC
2. Power rating : 150watt
3. Length of the cable : 2 meters approximately
4. Operating frequency : 50Hz to 60Hz
5. Built-in temperature controller
6. Easy to operate, reliable, and long service life
7. Compatible with standard glue sticks
8. Use in heavy-duty application

Pro mini 5V 16Mhz with ATMEGA328P microcontroller chip board

Specification:-

1. Microcontroller: ATMEGA238P
2. Input voltage : 5V to 12V DC
3. Clock frequency: 16Mhz
4. Supports auto-reset
5. Over-current protected
6. Analog input/output pins: 8
7. Digital input/output pins: 14

MEGA2560 MCU REV3 development board with an onboard ATMEGA2560 microcontroller chip

Specification:-

1. Model name : MEGA2560
2. IC name : ATMEGA2560
3. Operating voltage : 5V
4. Input voltage range : 5V to 12V
5. Memory storage : 256KB flash memory of which 8KB used by the bootloader
6. Digital I/O Pins: 54 (of which 15 provide PWM output)
7. Analog Input Pins: 16

UNO R3 CH340G development board with ATMEGA328P (SMD) microcontroller chip

Specification:-

1. Model name : UNO R3
2. Chip name : ATMEGA328
3. Operating voltage : 5V
4. Recommended voltage range : 5V to 12V
5. Analog input/output pins : 6
6. Digital input/output pins : 14 (of which 6 provide PWM output)
7. Clock frequency : 16Mhz

NANO R3 CH340 development board with ATmega328 microcontroller chip

Specification:-

1. Model name : NANO R3
2. Chip name : ATmega328
3. Operating voltage : 5V
4. Recommended operating voltage range : 5V to 12V
5. Digital input/output pins :  14 (of which 6 provide PWM output)
6. Analog input/output pins : 8
7. Flash memory : 32KB
8. Clock frequency : 16MHz

VIPER12A Low power off-line SMPS primary switcher 8 pins IC pack of 50pcs

Specification

1. Output voltage:  5V to 16V
2. Input voltage: 85V to 265V AC
3. Input voltage frequency : 50/60Hz
4. Output current : 200mA
5. Efficiency :  80%
6. Rise time :  50ns
7. Fall time : 100ns

5054 Bright white color 1W 12V High power 3 SMD LED modules pack of 200pcs

Specification

1. Operating voltage range: 5V to 15V
2. Recommended voltage: 12V
3. Emerging color : White
4. Power rating : 1Watt
5. Dimensions of LED : 5mm x 5.4mm (L x B)
6. Max. Drive current range : 60mA to 150mA
7. LED junction temperature : 125°C

12V 3W Bright White waterproof 3 LED module pack of 20pcs

Specification

1. Operating voltage : 12V
2. Emerging color : white
3. Power rating : 3Watt
4. Dimensions of the module : 80mm x 20mm (L x B)
5. LED junction temperature : 125°C

12V 3W Bright multicolor waterproof 3 LED module pack of 60pcs

Specification

1. Operating voltage: 12V
2. Emerging color: White
3. Power rating : 3Watt
4. Dimensions of the module : 80mm x 20mm (L x B)
5. LED junction temperature : 125°C

12V 1.5W Bright White color waterproof 3 LED module pack of 60pcs

Specification

1. Operating voltage: 12V
2. Emerging color: white
3. Power rating : 1.5Watt
4. Dimensions of the module : 65mm x 15mm (L x B)
5. LED junction temperature : 125°C

TEA1523 low power system DIP 8 pins SMPS IC pack of 10pcs

Specification

1. Supply voltage range : 10V to 40V
2. Oscillator frequency : 200KHz
3. Integrated power switch value : 6.5Ω at 650V
4. Adjustable overcurrent protection
5. Under-voltage protection
6. Temperature protection
7. Short circuit winding protection

TEA1523 low power system DIP 8 pins SMPS IC pack of 50pcs

Specification

1. Supply voltage range : 10V to 40V
2. Oscillator frequency : 200KHz
3. Integrated power switch value : 6.5Ω at 650V
4. Adjustable overcurrent protection
5. Under-voltage protection
6. Temperature protection
7. Short circuit winding protection

D2498 Silicon NPN triple diffused 3 pins IC for horizontal deflection output pack of 50pcs

Specification

1. Collector-Base voltage rating : 1500V
2. Collector-emitter voltage rating : 600V
3. Collector current : 6A
4. Collector power dissipation : 50Watt
5. Base current : 3A

SN74HC164 8 Bit parallel out serial shift registers DIP 14 pins IC pack of 50pcs

Specification

1. Operating voltage range : 2V to 6V
2. Number of bits per element : 8
3. Shift register function : Serial to parallel
4. Number of elements : 1 element
5. Logic function : Shift register
6. Input clamp current : 20mA

Combo of Temperature Controller with Probe | 12V Adapter | Cooling Fan | Humidity Sensor

Specification:-

1. XH-W1209
   1. Temperature control range : -50°C to +110°C
   2. Resolution : -9.9°C to +99.9°C
   3. Resolution at all temperatures :  1°C
   4. Accuracy :  0.1°C
   5. Refresh rate : 0.5s
   6. Supply voltage :  12V DC
   7. Measuring inputs :  NTC10K
2. Humidity sensor
   1. Accuracy :  0.1°C
   2. Refresh rate : 0.5s
   3. Supply voltage :  12V DC
3. Adapter
   1. High quality adapter with latest and advance technology
   2. Input voltage : 100V to 265V AC
   3. Output voltage : 12V
   4. Power rating : 1A
4. Fan
   1. Model name  :  8025 (3 inch)
   2. Working voltage  :  12V
   3. Power rating  :  0.22A
   4. Light weight

Combo of Temperature Controller with Probe | 12V 1A Adapter | Cooling Fan | Temperature Sensor

Specification:-

1. XH-W1209
   1. Temperature control range : -50°C to +110°C
   2. Resolution : -9.9°C to +99.9°C
   3. Resolution at all temperatures :  1°C
   4. Accuracy :  0.1°C
   5. Refresh rate : 0.5s
   6. Supply voltage :  12V DC
   7. Measuring inputs :  NTC10K
2. Temperature sensor
   1. Accuracy :  0.1°C
   2. Refresh rate : 0.7s
   3. Supply voltage :  5V DC
3. Adapter
   1. High quality adapter with latest and advance technology
   2. Input voltage : 100V to 265V AC
   3. Output voltage : 12V
   4. Power rating : 1A
4. Fan
   1. Model name  :  8025 (3 inch)
   2. Working voltage  :  12V
   3. Power rating  :  0.22A
   4. Light weight

Combo of Temperature Controller with Probe | 12V Adapter | Cooling Fan

Specification:-

1. HW-W3001
   1. Power supply range : 110V to 220V AC
   2. Rated power : 1500W
   3. Rated current : 10Amp
   4. Measurement temperature range :  -50°C to +110°C
2. Adapter
   1. Input voltage : 100V to 265V AC
   2. Output voltage : 12V
   3. Power rating : 1A
   4. Max. frequency range : 50 to 60 Hz
3. Fan
   1. Model name  :  8025 (3 inch)
   2. Working voltage  :  12V
   3. Power rating  :  0.22A
   4. Lightweight

Combo of Temperature Controller with Probe | DC Adapter | Cooling Fan | 3.5mm Female Jack

Specification:-

1. XH-W1209
   1. Temperature Control Range : -50°C to +110°C
   2. Resolution : -9.9°C to +99.9°C
   3. Resolution at all temperatures:  1°C
   4. Accuracy:  0.1°C
2. Adapter
   1. Input voltage : 100V to 265V AC
   2. Output voltage: 12V
   3. Power rating: 1A
   4. Max. frequency range: 50 to 60 Hz
3. Cooling fan
   1. Model name:  8025 (3-inch)
   2. Working voltage:  12V
   3. Power rating:  0.22A
4. Female jack
   1. Jack size: 3.5mm
   2. Easy to connect and durable

Combo of Temperature Controller with Probe | DC Adapter | Cooling Fan | Female Jack with 3 Connection

Specification:-

1. XH-W1209
   1. Temperature Control Range : -50°C to +110°C
   2. Resolution : -9.9°C to +99.9°C
   3. Resolution at all temperatures :  1°C
   4. Accuracy :  0.1°C
2. Adapter
   1. Input voltage : 100V to 265V AC
   2. Output voltage : 12V
   3. Power rating : 1A
   4. Max. frequency range : 50 to 60 Hz
3. Cooling fan
   1. Model name  :  8025 (3 inch)
   2. Working voltage  :  12V
   3. Power rating  :  0.22A
4. Female jack
   1. Jack size : 3.5mm
   2. Easy to connect and durable
   3. 3 connection for joining

kit - 1 pcs Temperature Controller with Probe, 1 pcs  Cooling Fan, 1 pcs Adapter, 1 pcs Female Jack