ALL ELECTRONICS COMPONENTS

2SA812 100mA 50V SOT-23 PNP Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: PNP
2. Polarisation: bipolar
3. Collector-emitter voltage: 50V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 180MHz
7. Gain H(fe): 90/600
8. Collector current:  100mA

SOT-23 , MMBD4148 75V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : SOT-23
2. Maximum respective peak reverse voltage : 75v
3. Maximum average rectified current : 300A
4. Maxim reverse current : 2.5µA
5. Maxim forward voltage : 1.25V

250K Rotary potentiometer 14mm long round shaft handle 3 pin pack of 5pcs

Specification

1. Type : Single turn rotary potentiometer
2. Resistance value : 250K
3. Power rating : 0.3W
4. Shaft : 14 mm round shaft
5. Maximum Input Voltage  :  200Vdc
6. Rotational Life :  2000K cycles

0.027μF 273J 250VAC CBB62 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage: 250VAC
• Dimensions = 14.0mm(W)
• Dimensions = 15.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Reference Standard  =  GB/T 14472-98 (IEC 384-14)
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.001 (1kHz, 20°C)

0.33μF 100V micro polyester film capacitor Pack of 5

Specification:-

• Rated voltage : 100V
• Dimensions = 5mm(W)
• Dimensions = 6mm(H)
• Dimensions = 2mm(T)
• Capacitance Tolerance = ±5%

AD633 Analog Multiplier SMD IC

Specification:-

• Mounting: SMD
• Number of: 8 Pins
• 4-quadrant multiplication
• Laser-trimmed 10 V scaling reference
• High impedance unity-gain summing input
• Low cost, 8-lead SOIC and PDIP packages

0.022μF 223J 400V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V 
2. Dimensions = 11.0mm(W)
3. Dimensions = 8.5mm(H)
4. Dimensions = 5.0mm(T)
5. Dimensions = 8.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance => 15000M Ω 

2.2uf / 250V Aluminum Electrolytic Capacitors (6.3 X 11)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 6.3 X 11mm
4. Voltage Rating :  250V
5. Capacitance: 2.2uf
6. Capacitance tolerance : ±20%(M)

12cm x 6.5cm Copper Clad Single Side 1mm Pitch General Purpose Printed Circuit (PCB)

Specification:-

• Copper-clad coating PCB
• Dimension: 12cm x  6.5cm
• Board thickness: 1mm
• Shape: Rectangle
• Circuit printing: Single side
• High wear and tear properties
• Excellent heat resistance

33uf 25V Aluminum Electrolytic Capacitors (5 X 11 mm) Pack of 5pcs

Specification

• Rating Voltage = 25V
• Material = Aluminum
• Capacitor Size = 5 x 11 mm
• Impedance (O)max. 20°C 1000KHz = 300
• Ripple current = 150
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

MC34151 High Speed Dual MOSFET Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: −0.3 to VCC V
• Gate Drive Output-Source Current: 1.5 A
• Maximum Power Dissipation = 50°C: 0.56 W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: 0 to +70 °C
• Storage Temperature Range: -65 to +150 °C
• Two Independent Channels with 1.5 A Totem Pole Output

220uf 450V Aluminum Electrolytic Capacitors (35 x 35mm) Pack of 5pcs

Specification

• Rating Voltage = 450V
• Material = Aluminum
• Capacitor Size = 35 x 35mm
  
• Ripple current = 1.55
  
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for "Endurance"