ALL ELECTRONICS COMPONENTS

2200uf / 63V Aluminum Electrolytic Capacitors (18 X 35.5)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 18 X 35.5mm
4. Voltage Rating :  63V
5. Capacitance: 2200uf
6. Capacitance tolerance : ±20%(M)

IR2153 Self Oscillating Half Bridge Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side output voltage: -0.3 to VCC+0.3 V
• RT pin voltage: -0.3 to VCC+0.3 V
• Supply current (note 1): 25 mA

Electronic Spices 50Pcs 4.7 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 4.7 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 4.7 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

BA159 1000V ,DO-41 Fast Recovery Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 1000V
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 500ns
• Package : DO-41

KA431AZ Programmable shunt regulators transistors box of 2000pcs

Specification

1. Transistor type:  Programmable shunt regulator transistor
2. Programmable Output Voltage:  2.5V to 36V
3. Dynamic Output Impedance  :  0.2
4. Current Capability  :  1.0 to 100 mA
5. Low Output Noise Voltage
6. Fast Turn−on Response

1F2 100V ,R-1 Fast Recovery Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Peak forward surge current 8.3ms single half sine- wave : 25A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 150ns
• Package : R-1

GBU, GBU410 4A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBU
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 4.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 1.1V

MCP3208 12-Bit 8-Channel A/D Converter (ADC) with SPI Interface IC DIP-16 Package

Specification:-

• Single supply operation: 2.7V – 5.5V
• 100ksps max. sampling rate at VDD = 5V
• 50ksps max. sampling rate at VDD = 2.7V
• Industrial temp range: -40°C to +85°C
• All Inputs and Outputs w.r.t. VSS: -0.6V to VDD +0.6V
• Storage Temperature: -65°C to +150°C
• Ambient temperature with power applied: -65°C to +125°C
• Soldering temperature of leads (10 seconds): +300°C
• ESD Protection On All Pins (HBM): ≥ 4 Kv

0.0015μF 153J 630V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V
2. Dimensions = 13.0mm(W)
3. Dimensions = 9.2mm(H)
4. Dimensions = 6.0mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

100uf / 400V Aluminum Electrolytic Capacitors (25 x 30)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 25 x 30mm
4. Voltage Rating :  400V
5. Capacitance: 100uf
6. Capacitance tolerance : ±20%(M)

CD4053BE Triple 2 channel analog multiplexer DIP 16 pins IC pack of 50pcs

Specification

1. Wide range of digital and analog signal levels
   1. Digital : 3 V to 20V
   2. Analog : ≤ 20V_P-P
2. Gain bandwidth : 30MHz
3. Current leakage : 100nA
4. Channel to channel matching : 5Ω (ohm)
5. On state resistance : 240 Ω ( ohm )

102, 50V Multilayer Ceramic Capacitor 1000PF (1000Pcs)

Specification

1. Part no:   CT4-0805Y102M500
2. CAP:        1000PF
3. Tolerance Rating: ±20 %
4. Voltage Rating: 50 V
5. Material: Ceramic