ALL ELECTRONICS COMPONENTS

IRF640 200V 18A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 200V
• Continuous Drain Current (Id): 18A
• Drain-Source Resistance (Rds On): 0.15 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 70 nC
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 150W

TEA1104 Battery Monitor and Fast Charge SMD IC for NiCd and NiMH Chargers

Specification:-

• Voltage: 3.0V to 15V
• Current: 1A
• Battery Type Compatibility
• Over-Voltage Protection
• Temperature Protection

SMC(G) SMCJ60A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 60.0V
3. Maximum peak pulse current : 15.5A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 96V
6. Power dissipation : 1500W

CD4046 Micropower Phase Locked Loop IC (DIP-16 Package)

Specification:-

• Voltage: 3V to 18V
• Low frequency drift: 0.04%/°C (typ.) at VDD = 10 V
• High VCO linearity: <1% (typ.) at VDD = 10 V
• 100% tested for quiescent current at 20 V
• 5-V, 10-V, and 15-V parametric ratings
• Operating temperature range: −55°C to +125°C
• Very low power consumption: 70 µW (typ.) at VCO fo = 10 kHz, VDD = 5 V
• Operating frequency range up to 1.4 MHz (typ.) at VDD = 10 V, RI = 5 k ohm

2SK1317 1500V 2.5A N-Channel Power MOSFET (TO-3P Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 1500V
• Collector Current (Ic): 2.5A
• Drain-Source Resistance (Rds On): 12Ohms
• Gate-Source Voltage (Vgs): 20V
• Configuration: Single
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 100W

SA78A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 86.7 , Max(V) 95.8
• Maximum peak current : 4.0
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

74HC109 Dual J-K Positive-Edge-Triggered Flip-Flops SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• Input Clamping Current: ±20 mA
• Output Clamping Current: ±20 mA
• J and K inputs for easy D-type flip-flop
• Storage Temperature Range : −65°C to + 150°C

CD4016 Quad Bilateral Switch IC (DIP-14 Package)

Specification:-

• Wide supply voltage range: 3V to 15V
• VDD Supply Voltage: −0.5V to +18V
• VIN Input Voltage: −0.5V to VDD + 0.5V
• TS Storage Temperature Range: −65°C to + 150°C
• Power Dissipation: Dual-In-Line: 700 mW
• Frequency response, switch “ON”: 40 MHz (typ.)
• Lead Temperature: 260°C

DAC0800 8-Bit Digital to Analog D/A Converter IC (DIP-16 Package)

Specification:-

• Output type: Unbuffered Current
• DAC channels: 1
• Output range: 0 to 2mA
• Settling time: 0.1µs
• High Output Compliance: −10 V to +18 V
• Wide Power Supply Range: ±4.5 V to ±18 V
• Low Power Consumption: 33 m W at ±5 V
• Operating temperature range: 0°C to 70°C

MCP4921 12-Bit Digital to Analog Converter (DAC) with SPI Interface IC (DIP-8 Package)

Specification:-

• Supply Voltage: 2.7V to 5.5V
• Current at Input Pins: ±2 m A
• Current at Supply Pins: ±50 m A
• Current at Output Pins: ±25 m A
• All Inputs and Outputs w.r.t. VSS: VSS –0.3V to VDD+0.3V
• Storage Temperature: -65°C to +150°C
• Ambient temperature with power applied: –55°C to +125°C
• Soldering temperature of leads (10 seconds): +300°C

P4KE43 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 38.7 , Max(V) 47.3
• Maximum peak current : 6.8A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Package : DO-41

P6KE13 5.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:

• Minimum Breakdown voltage: 11.7V
• Maximum Breakdown voltage: 14.3V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 32A
• Maximum clamping voltage: 19.0V
• Maximum Temperature Coefficient of VBR: 0.081%
• Power Dissipation: 600W
• Package -DO-15