SENSOR MODULES
Showing 1–12 of 99 results
-
KY032 - TSOP based Infrared obstacle avoidance proximity sensor module
Rs. 89.00Specifications:-
- Distance detection: 2cm to 30cm
- Working voltage: 3.3V to 5V
- Low Power High immunity against ambient light.
- TTL and CMOS compatibility.
- Output active low.
-
HMC5883L Magnetometer sensor module (GY273)
Rs. 129.00Specification:-
- Operating voltage : 3V to 6V DC
- I2C interface
- 1-2 degree heading accuracy
- Integrated 12-bit ADC
- 160Hz max data rate
- Needs no external components
- Easy to use module
-
TTP229 - 16 Channel capacitive touch sensor module
Rs. 139.00Specifications:-
- Onboard TTP229 capacitive touch sensor
- Operating voltage 2.4V~5.5V.
- Built-in regulator.
- Operating current = 3V no load.
- At fast mode typical 9.0uA
- The response time about 100mS at fast mode, 200mS at low power mode
-
KY009 3 Color SMD RGB LED sensor module
Rs. 29.00Specification:-
- Operating voltage : 5V
- Forward current : 30mA max.
- Operating temperature : -25 °C to 85 °C
- You can regulate the brightness of the LEDs via pulse-width modulation.
- Primary colors : red, blue, green.
-
ACS712 - 30A range current detection sensor module
Rs. 149.00Specifications:-
- Measures both AC and DC current
- Provides isolation from the load
- Easy to integrate with MCU, since it outputs an analog voltage
- Scale factor : 66mV per Amp
-
YFS201 water flow calculator sensor module
Rs. 199.00Specification:-
- Module name : YF-S201
- Sensor Type : Hall effect
- Working Voltage : 5 to 18V DC
- Max current draw : 15mA @ 5V
- Output Type : 5V
- Working Flow Rate : 1 to 30 Liters/Minute
- Working Temperature range: -25 to +80℃
-
TTP224 - 4 channel Digital capacitive touch sensor module
Rs. 99.00Specifications:-
- Onboard TTP224 capacitive touch sensor IC's
- 4 board-level sensor indicator
- Working voltage: 2.4V - 5.5V
- Low power selection
-
9 mm Electret condenser microphone sound sensor pack of 5pcs
Rs. 69.00Specification:-
- Operating Voltage : 2V to 10V
- Current consumption : 0.5mA (max)
- Recommended operating voltage : 2V
- Operating Frequency : 20Hz to 16,000Hz
- Impedance : <2.2kΩ
- Package includes : 5 pieces
-
Coil spring switch, a multi-functional capacitive touch sensor switch, and an LED dimmer control switch
Rs. 99.00Specification
- Input voltage: 3.7V-24v
- Output voltage: 3.7V-24V
- Standby current: 10-15mA
- Standby power consumption: 0.01W
- Load power: 72W
- Load current: 3A
- Working temperature: -25℃-85℃
-
MQ-5 Gas leakage detection sensor module
Rs. 99.00Specifications:-
- Working voltage: 3V to 5V
- Detecting concentration: 10000ppm
- Sensing Resistance: 60kΩ
- Heating consumption: 800mW
-
RCWL0516 - Microwave radar sensor module
Rs. 59.00Specifications:-
- Operating Voltage : 28V
- Operating Current : 2.8mA
- Detecting Range : 5 - 9 m
- Transmitting Power : 20mW
-
HW-456-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
Rs. 99.00Specification
- Operating Voltage Range: DC4.5-20V
- Static current: <60uA
- Output Level: High 3.3 v / Low 0 v
- Trigger: Repeatable trigger (default)
- Working temperature: -20- + 80 degrees
- Fast Response Time
- Sensitivity adjustable