NEW ARRIVALS

5200mAh 12V Li-ion Rechargeable Battery Pack with BMS & DC Male/Female Connector

Specification:-

• 18650 Li-ion rechargeable battery
• Battery type : Lithium-Ion Battery
• Voltage: 10.4-12.8V DC
• Capacity: 5200Ah
• Connector Type: DC 5.5mm Jack & DC Pin 
• Output Current: 10 amp
• Protection: Inbuilt BMS (Overcharge / Over-discharge / Short circuit)

STEM Learning 4WD Robot Car Kit | Smart Vehicle Project with Arduino UNO R3 | Bluetooth & Sensor

Specification:-

• Controller Board: Arduino UNO R3 
• Motor Driver Module: L298N Dual H-Bridge Motor Driver
• Motors: 4 × DC Gear Motors with Wheels
• Power Supply: 2 × 18650 Lithium-ion Battery Holder (7.4V)
• Chassis: Acrylic/Metal Chassis Plate with Mounting Holes
• Connectivity: USB Type-A To B Cable for Programming
• Comprehensive C/C++ programming capabilities

12V 5A 60W SMPS LED Driver Power Supply | AC 175–265V to 12V DC Converter

Specification:-

1. Output Voltage: 12V
2. Output Current: 5A 
3. Output Power: 60W
4. Input Voltage: 175V/265V AC
5. Frequency: 50/60Hz
6. IP Level-Waterproof

2000mAh 12V Li-ion Rechargeable Battery Pack with BMS | DC Female & JST Connector

Specification:-

• 18650 Li-ion rechargeable battery
• Battery type : Lithium-Ion Battery
• Voltage: 10.4-12.8V DC
• Capacity: 2000Ah
• Connector Type: DC 5.5mm Female & 2 pin JST Connector  
• Output Current: 10 amp
• Protection: Inbuilt BMS (Overcharge / Over-discharge / Short circuit)

12V DC Brushless Exhaust Blower Fan | Cooling & Air Ventilation Fan

Specification

• Model: DW127530-SL1
• Motor Type: Brushless DC Motor
• Rated Voltage: 12V DC
• Operating Voltage: 9V – 14V DC
• Current Rating: ~0.15A
• Connector Type: 2-Pin JST Connector
• Cable Length: 22cm 
• Fan dimension: 75x73x30 mm (approx.)
• Low power consumption

4000mAh 12V Li-ion Rechargeable Battery Pack with BMS | DC Female & 2515 JST Connector

Specification:-

• 18650 Li-ion rechargeable battery
• Battery type : Lithium-Ion Battery
• Voltage: 10.4-12.8V DC
• Capacity: 4000Ah
• Connector Type: DC 5.5mm Female & 2 pin JST Connector  
• Output Current: 10 amp
• Protection: Inbuilt BMS (Overcharge / Over-discharge / Short circuit)

DIY Line Follower Robot Kit | Arduino IDE Compatible | 3-Array IR Sensor | Robotics STEM Learning Kit for Students

Specification:

• Controller: Arduino Uno R3 compatible board
• Sensor: 3-Array IR Line Tracking Module
• Motor Driver: L298N or equivalent
• Motors: DC Gear Motors with wheels
• Chassis: DIY car frame with caster wheel
• Power: Battery holder included
• Programming: Arduino IDE

20+ Fun Science Experiments for Kids | STEAM Educational Learning Kit (Age 8+)

Specification:

• Kit Type: DIY Science & Robotics Educational Kit
• Recommended Age: 8+ years
• Total Components: 16+ electronic parts (motor, LEDs, buzzer, solar panel, resistors, switches, etc.)
• Power Source: Battery holder & solar panel (included)
• Learning Scope: Basic electronics, renewable energy, robotics fundamentals
• Durability: Reusable and safe for multiple projects

Kit Included:

0.25M Type-C to USB Fast Charging Cable 65W 3.1A, Red TPE Short Cable

Specification:

1. Type C Cable
2. Total length: Approx. 0.25 Meter
3. Material: TPE soft wire
4. Current Rating: 3.1A
5. Charging Power: Up to 65W
6. Fast Charging
7. Long-Lasting Performance
8. High-speed data transfer

DIY Self-Balancing Robot Car Kit | Uno R3 + L298N Motor Driver + MPU6050 | Compatible with Arduino IDE

Specification:-

• Main Controller: Uno R3 Board
• Motor Driver: L298N Dual H-Bridge
• Sensor: MPU6050 Gyroscope + Accelerometer
• Power Supply: Battery-powered (holder included)
• Compatibility: Arduino IDE / DIY Robotics Projects

C-Type 5V DIY Ultrasonic Piezoelectric Humidifier Mist Maker Circuit Board Pack of 5

Specification:-

• Rated voltage: DC 5V
• Low-noise operation
• Small fog particles
• Long operation life
• High stability
• Comes with a Micro USB cable

46-in-1 DIY Sensor Kit (37-in-1 + Extra Modules) | Compatible with Arduino IDE & Raspberry Pi

Specification:-

• Modules Included: 46 modules (37-in-1 sensor kit + 9 additional modules)
• Durability: High-quality, reusable modules designed for long-term experimentation
• Hall effect detection sensor (easily available)
• Joystick sensor Input voltage range: 3.3V to 5V
• Suitable for Arduino, AVR, and PIC microcontroller projects
• The sensor module kit is perfect for various DIY projects and robotics science projects
• Programming Support: Fully supports Arduino IDE, Python, and Scratch-based coding platforms

Package includes:
1x Real time clock | 1x Joystick | 1x 5v relay | 1x Big sound | 1x Small sound | 1x Tracking | 1x Avoidance | 1x Water sensor | 1x Flame sensor | 1x Linear hall | 1x Touch sensor | 1x Digital temperature | 1x Active buzzer | 1x Passive buzzer | 1x  rgb | 1x Ultrasonic sensor | 1x Two color led | 1x Mini two color led | 1x Reed | 1x Mini reed | 1x Mpu 6050 | 1x Heartbeat | 1x 7 Color led | 1x Mp1584en | 1x Push button | 1x Shock sensor | 1x Rotatory encoder | 1x Light cup | 1xTilt switch | 1x Ball switch | 1x Photo resistor | 1x Gas sensor | 1x Analog hall | 1x Magnetic hall | 1x Temp 18b20 | 1x Analog temp | 1x IR Receiver | 1x Light blocking | 1x Sd card reader | 1x IR emitter | 1x Temp and humidity | 1x Laser emitter | 1x Smd rgb | 1x Soil moisture sensor | 1x Tap module | 1x Breadboard power supply.