SENSOR MODULES
Showing 1–12 of 97 results
-
PIR Motion Detector Sensor Module
Rs. 69.00Specifications:-
- Detection Range: Usually between 16 and 23 feet (5 to 7 meters)
- The angle of detection: is typically 120 degrees
- Operating Voltage: Typically between 3.3 and 5 volts DC
- Sensitivity Adjustment: Frequently features sensitivity settings that can be changed.
- Output Signal: Digital (High/Low) or Analog (Voltage)
-
LM393 Photosensitive light dependent resistor LDR sensor module
Rs. 39.00Specifications:-
- Operating voltage : 3.3V-5V
- Power indicator : Red
- Digital switch output indicator : Green
- Bolt hole for easy installation
-
MPU6050 Gyroscope and Accelerometer sensor module
Rs. 119.00Specifications:-
- 3-aixs accelerometer and 3-axis gyroscope values combined
- Power supply : 3V to 5V
- Communication : I2C protocol
- Built-in 16-bit ADC provides high accuracy
- Built-in DMP provides high computational power
- Can be used to interface with other IIC devices like a magnetometer
-
TTP223 Digital Capacitive Touch Switch Module-red
Rs. 29.00Specifications:-
- Supports momentary or latching/toggle modes.
- Supports Active High or Active Low output signal modes.
- Input voltage : 2V to 5.5V DC
- The response time max: 60mS in fast mode, ~220mS at low power mode @VDD=3V.
- Sensitivity can adjust by the capacitance(0~50pF).
- Have two kinds of sampling length by pad option
-
Digital Capacitive Touch Switch Module For Arduino - TTP223B
Rs. 29.00Specifications:-
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode): 60 mS
- Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
- Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
- Response time (low power mode): 220 mS
- Size : 2.4 x 2.4
-
Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducer Sensor DC 5V 2-450cm
Rs. 89.00Specification:-
- Operating voltage: 5V DC
- Operating current: 15mA
- Measure angle: 15°
- Ranging distance: 2cm - 400cm
- Working frequency: 40Hz
- Trigger input signal: 10uS TTL pulse
- Echo output signal: Input TTL lever signal and the range in proportion
- Working voltage : 5V(DC)
- Static current: Less than 2mA.
- Output signal: Electric frequency signal, high-level 5V, low-level 0V.
-
Flame Sensor infrared receiver ignition source detection module
Rs. 49.00Specifications:-
- Output channel : 1
- Power supply : 3.5V to 5V
- High Photo Sensitivity
- Fast Response Time
- Sensitivity adjustable
- Working voltage : 3.3V to 5V
- Detect range : 60 degrees
- Digital/Analog output
- On-board LM393 chip
-
DHT11 Temperature and humidity detection sensor module
Rs. 79.00Specification:-
- Operating Voltage: 3.5V to 5.5V
- Operating current: 0.3mA
- Output: Serial data
- Temperature Range : 0°C to 50°C
- Humidity Range: 20% to 90%
-
ESP8266 5V 1 Channel relay module IOT smart home remote control switch
Rs. 199.00Specifications:-
- Transmission Distance (m) : 40m
- Trigger voltage: 5V DC
- Switching voltage: 250V @ 10A
- Switching voltage: 30V @ 10A
- Relay voltage : 5V (10A/250V AC, 10A/30V DC)
- Baud rate: 9600
-
IR Proximity Sensor for Line Follower
Rs. 29.00Specifications:-
- Operating voltage : 3.6V to 5V DC
- Digital output : logic one (+3.5V DC) logic zero (0V DC)
- Mounting hole size : 3mm
- IC model name : 393
- Distance measuring range : 2cm to 30cm
- Effective distance range : 2cm to 80 cm
-
Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino
Rs. 49.00Specifications:-
- Connects to Arduino using standard SPI pins.
- Supports Micro SD and TF card formats.
- Includes a built-in voltage level shifter for 5V and 3.3V systems.
- Easily interfaces with Arduino for data storage and retrieval.
-
IIC or I2C Serial interface adapter module for 16 x 2 (1602) Character LCD display
Rs. 69.00Specifications:-
- IC Name : PCF8574
- Operating voltage : 5V
- PCB size : 42mm x 20mm(L x B)
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.