IC

CA3102E Dual High Frequency Differential Op-Amplifier IC (DIP-14 Package)

Specification:-

• Collector-to-Emitter Voltage : 15V
• Collector-to-Base Voltage: 20V
• Collector-to-Substrate Voltage: 20V
• Emitter-to-Base Voltage: 5V
• Collector Current, IC: 50 m A
• Temperature Range: -55°C to 125°C
• Maximum Power Dissipation 300mW
• Maximum Junction Temperature: 150°C
• Maximum Storage Temperature Range: -65°C to 150°C

CD40109 CMOS Quad Low-to-High Voltage Level Shifter IC (DIP-16 Package)

Specification:-

• Noise Margin (Full Package-Temperature Range):
• 1 V at VCC = 5 V, VDD = 10 V
• 2 V at VCC = 10 V, VDD = 15 V
• 5-V, 10-V, and 15-V Parametric Ratings
• 1 µA at 18 V Over Full Package-Temperature Range
• 100 nA at 18 V and 25°C
• 100% Tested for Quiescent Current at 20 V

LP4056 SOP-8 TP Chips Battery Charging IC Pack of 50

Specification:-

• Package: SOP-8
• Input Supply Voltage(VCC)：-0.3V～8V
• Programmable Charge Current Up to 1000mA
• Preset 4.2V Charge Voltage with 1.5% Accuracy
• Complete Linear Charger in SOP-8
• Constant-Current/Constant-Voltage
• No MOSFET, Sense Resistor or Blocking Diode Required

CD4067 16-Channel Analog Multiplexer/Demultiplexer SMD IC

Specification:-

• DC Supply Voltage: -0.5V to +20V
• Input Voltage: -0.5V to VDD +0.5V
• Storage Temperature: -65°C to +150°C
• Power Dissipation: 700 mW
• Lead Temperature: 265°C
• Operating Temperature Range: -55°C to +125°C
• DC Input Current: ±10mA

H8C1VB Encoder DIP 9 pins IC (Pack -50)

specification:

• Supply voltage:   2.4v& 12v
• Material:    plastic package with metal pins.
• chip of a semiconductor 
• High quality product 
• Bettar work with HT12D Dicoder

74LS47 BCD to 7-Segment Decoder/Driver SMD IC

Specification:-

• Mounting: SMD
• Input levels: CMOS level
• Supply Voltage range: 4.5 to 5.5V
• Output Current (High): -50mA
• Output Current (Low): 3.2A
• Operating Temperature: -55°C to 125°C

74HC32 Quad 2-Input OR Gate IC (7432 IC) DIP-14 Package

Specification:-

• Type: DIP Bipolar
• Number of pins: 14
• Voltage Rating: 2.0 to 6.0V
• Mounting: Through Hole 
• Operating Temperature (°C): − 0°C to + 70°C

TO-92 78L06, 3-Terminal Positive Voltage Regulator IC pack of 5pcs

Specification

1. Output Current Up To 1.5 A
2. Input Voltage 5.76V To 6.24V
3. Thermal Overload Protection Short Circuit Protection
4. 2 % Output Voltage Tolerance
5. Output Transition SOA Protection

74HC75 4 Bit Bi-Stable Latch IC DIP-16 Package

Specification:-

• Number of pins: 16
• Mounting: Through Hole
• Voltage Rating: 4.75 to 5.25V
• Output Current at VCC: 4 mA
• Operating Temperature (°C): 0°C ~ 70°C

TL082 JFET Input Operational Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Iq per channel: 1.4 (mA)
• Rail-to-rail In to V+
• Low Input Bias Current: 30 pA Typical
• Low Input Offset Current: 5 pA Typica
• Low Power Consumption: 1.4 mA/ch Typical
• Wide Common-Mode and Differential Voltage Ranges

ULN2003 7 Darlington Transistor Arrays SMD IC

Specification:-

• Mounting Style: SMD/SMT
• Output Current to 500 mA
• Output Voltage to 95V
• Transient-Protected Outputs

74LS147 Dual Decimal to BCD Priority Encoder IC DIP-16 Package

Specification:-

• Number of pins: 16
• Supply Voltage (VCC): 4.75 to 5.25V
• Output Current (High): 8mA
• Output Current (Low): 70 µA
• Operating free-air temperature range: -400°C