ALL ELECTRONICS COMPONENTS

0.15μF 154J 630V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V
2. Dimensions = 25.0mm(W)
3. Dimensions = 13.0mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 21.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

4.7V 0.5watt 1N4732A Zener diode ±5% voltage tolerance pack of 50pcs

Features:-

• Type: BZX55C4V7
• Nominal Zener Voltage (V_Z): 4.7V
• Power dissipation (P_Z): 1300mW (practically 500mW)
• Zener regulator current (I_Zm): 193mA

TIP-122 NPN Transistors 100V (TO-220 Package) Pack of 100

• Transistor Polarity - NPN
• Collector-Emitter Voltage (VCEO) - 100V
• Continuous Base Current (IB) - 120A
• Continuous Collector Current (IC) - 3A
• Emitter cut-off current (IC) - 500mA
• Operating Temperature Range - (-65 - 150°C)

50Pcs 5.6K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 5.6K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 5.6K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

1N4744A 15V 1 watt Zener diode pack of 20pcs

Specification

• Nominal Zener Voltage (VZ): 15V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 304mA

MCP23S17 16 Bit I/O Expander with serial interface DIP 28 pin IC

Specification

1. Chip configuration : 16bit
2. Bus frequency : 10MHz
3. IC Interface type : serial
4. Supply voltage : 1.8V to 5.5V
5. Standby current : 1uA
6. High speed SPI interface

BZV55-C4V7 (SMD) 4.7V 0.5 watt Zener diode pack of 50pcs

Features:-

• Non-repetitive peak reverse power dissipation: ≤ 40 W
• Total power dissipation: ≤ 500 mW
• Voltage tolerance : ±5 %
• Working voltage : 4.7V
• Low differential resistance
• Small hermetically sealed glass SMD package

7.7cm x 5.2cm Copper clad plan printed circuit boards or PCB pack of 20pcs

Specification

1. Copper clad coating PCB
2. Dimension : 7.7cm x 5.2cm
3. Board thickness : 1 mm
4. Circuit printing : single side
5. High wear and tear properties
6. Excellent heat resistance

BZV55-C27 (SMD) 27V 0.5 watt Zener diode pack of 50pcs

Features:-

• Non-repetitive peak reverse power dissipation: ≤ 40 W
• Total power dissipation: ≤ 500 mW
• Voltage tolerance: ±5 %
• Working voltage: 27V
• Low differential resistance
• Small hermetically sealed glass SMD package

KA2206B 2.3W Dual audio power amplifier 14 pins IC pack of 10pcs

Specification

1. Supply voltage: 15V
2. Power dissipation: 4W
3. Operating supply voltage range: 9V to 11V
4. Quiescent circuit current : 40mA to 55mA
5. Closed loop voltage gain: 43dB to 47dB
6. Output power: 2.3W

GBU, GBU808 8A 800V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBU
2. Maximum respective peak reverse voltage : 800v
3. Maximum average rectified current : 8.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 200A
6. Maxim forward voltage : 1.1V

8MHz Electronic quartz crystal oscillators KDS8.000 through hole 2 pins pack of 100pcs

Specification:-

1. High-quality product
2. Load Capacitance  :  12.5pF
3. Frequency Tolerance  :  30ppm
4. Frequency Temperature Stability  :  20ppm
5. Resonance Resistance  :  40 ohms
6. High frequency of operation
7. Automatic amplitude control and frequency drift