ALL ELECTRONICS COMPONENTS

2N2222 General purpose NPN transistor packs of 100pcs

Specifications:

• Transistor Type  :  Bipolar high current NPN Transistor
• DC Current Gain  :  100
• Continuous Collector current  :  800mA
• Emitter Base Voltage  :  6V
• Collector Emitter Voltage  :  30V
• Base Current  :  5mA

20V 0.5 watt 1N4747 Zener diode ±5% voltage tolerance pack of 50pcs

Features:-

• Type : BZX55C20V ST
• Nominal Zener Voltage (VZ): 20V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 750mA

50Pcs 8.2K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 8.2K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 8.2K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

10 uf 50V Polarized electrolytic capacitor pack of 10pcs

Specifications

1. Type:  electrolytic
2. Polarity:  negative and positive terminal
3. Capacitance value  :  10uf
4. Voltage value  :  50V
5. Temp. range  :  40° C to 105° C
6. Offer long life
7. Package include  :  10 pieces

Electronic Spices 5000Pcs 100 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 100 MR Ω ohm MF Through Hole Resistors Axial Lead

SG3525A Pulse width modulation controller DIP 16 pins IC pack of 10pcs

Specification

1. Type : Pulse width modulation controller
2. Supply voltage :  8V to 35V
3. Frequency range : 100 to 400 KHz
4. Max. power dissipation :  1000mW
5. Pulse shutdown capability
6. External oscillator synchronization pin

12V DC 250V AC 16A 6 Terminal NO HF115F-I/012-1HS3A Switching current PCB panel mount power relay pack of 1pcs

Specifications

1. Rated voltage : 250V AC
2. Max. switching voltage : 400V AC
3. Rated current : 16A
4. Limiting continuous current : 12A
5. Operate/release time max. : 8/6ms

0.01μF 103J 400V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V 
2. Dimensions = 11.0mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 5.0mm(T)
5. Dimensions = 8.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 15000M Ω

220uf 10V Aluminum Electrolytic Capacitors (6.3 X 11 mm) pack of 5pcs

Specification

• Rating Voltage = 10V
• Material = Aluminum
• Capacitor Size = 6.3 x 11 mm
• Impedance (O)max. 20°C 1000KHz = 130
• Ripple current = 200
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

MQ5 LPG and Natural flammable gas detection sensors pack of 5pcs

Specification:-

1. High-quality aluminum oxide body
2. Operating voltage:  5V
3. Target gas: LPG
4. Sensing resistance:  2kΩ to 20KΩ
5. Load resistance:  200kΩ (Adjustable)
6. Heating consumption:  lower than 800mW
7. Concentration scope: 200 to 10,000ppm

TL074CN Low noise JFET Quad operation amplifier DIP 14 pins IC pack of 10pcs

Specification

1. Wide power supply Range
   1. Singe supply:  10V to 30V
   2. Dual supply : ±5V to ±15V
2. Number of amplifiers : 4
3. Gain bandwidth : 3MHz
4. Current input bias : 65pA
5. Voltage input offset : 3mV

Electronic Spices 50Pcs 220k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 220k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 220K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V