ALL ELECTRONICS COMPONENTS

SSR-40DA 3V-32V DC 40A solid state relays pack of 10pcs

Specifications

1. Load current rate: 40A
2. Trigger voltage: 3V to 32V
3. Switching voltage : 24V to 480V AC at 40A
4. Type: DC to AC single phase
5. Maximum offset time: 10ms

Electronic Spices 5000Pcs 100 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 100 MR Ω ohm MF Through Hole Resistors Axial Lead

Electronic Spices 50Pcs 33k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 33k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 33K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

20V 0.5 watt 1N4747 Zener diode ±5% voltage tolerance pack of 50pcs

Features:-

• Type : BZX55C20V ST
• Nominal Zener Voltage (VZ): 20V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 750mA

TL074CN Low noise JFET Quad operation amplifier DIP 14 pins IC pack of 10pcs

Specification

1. Wide power supply Range
   1. Singe supply:  10V to 30V
   2. Dual supply : ±5V to ±15V
2. Number of amplifiers : 4
3. Gain bandwidth : 3MHz
4. Current input bias : 65pA
5. Voltage input offset : 3mV

470uf 16V Aluminum Electrolytic Capacitors (10 X 12.5 mm) pack of 5pcs

Specification

• Rating Voltage = 16V
• Material = Aluminum
• Capacitor Size = 10 x 12.5 mm
• Impedance (O)max. 20°C 1000KHz = 56
• Ripple current = 580
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

AO3401-30V 4A P-Channel MOSFET SOT-23 Pack of 50

Specification:-

• Gate to Source Voltage: ±12V
• Power Dissipation: 1.4W 
• Number of Pins: 3
• Drain to Source Voltage: -30V
• Continuous Drain Current: 4.2 
• Input Capacitance: 645pF

0.22μF 224J 630V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V
2. Dimensions = 25.0mm(W)
3. Dimensions = 15.0mm(H)
4. Dimensions = 10.0mm(T)
5. Dimensions = 21.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

24C16 16K Bit standard 2 wire bus interface serial DIP 8 pins IC pack of 10pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes

Electronic Spices 50Pcs 220k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 220k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 220K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

10 uf 50V Polarized electrolytic capacitor pack of 10pcs

Specifications

1. Type:  electrolytic
2. Polarity:  negative and positive terminal
3. Capacitance value  :  10uf
4. Voltage value  :  50V
5. Temp. range  :  40° C to 105° C
6. Offer long life
7. Package include  :  10 pieces

CD4047 Low power monostable astable multi vibrator 14 pins IC pack of 10pcs

Specifications

1. Low power multivibrator circuit IC
2. Operate in both Monostable and Astable operation
3. Supply voltage range : 3V to 15V
4. DC input current  :  10mA
5. Number of pins : 14
6. Low power consumption
7. High noise immunity