ALL ELECTRONICS COMPONENTS

4.7uf 50V Aluminum Electrolytic Capacitors (5 X 11 mm) Pack of 5

Specification

• Rating Voltage = 50V
• Material = Aluminum
• Capacitor Size = 5 x 11 mm
• Impedance (O)max. 20°C 1000KHz = 880
• Ripple current = 88
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

100uf 450V Aluminum Electrolytic Capacitors (22 x 40mm) Pack of 5pcs

Specification

• Rating Voltage: 450V
• Material = Aluminum
• Capacitor Size: 22 x 40 mm
  
• Ripple current = 0.69
  
• Capacitance Tolerance = ±20% (M)
• Shelf Life = After storage for 1000 hours at +105°C with no voltage applied, the capacitor shell meets the specified limits for "endurance."

12cm x 6cm Copper clad single side Pitch printed circuit board or PCB pack of 1pcs

Specification

1. Copper-clad coating PCB
2. Dimension : 12cm x 6cm
3. Board thickness: 1 mm
4. Pitch size: 1 mm
5. Circuit printing: single side
6. High wear and tear properties
7. Excellent heat resistance

TL494 Pulse Width Modulation Controller SMD IC

Specification:-

• Mounting: SMD
• Number of: 16 Pins
• Collector output voltage: 41V
• Collector output current: 250 mA
• Storage Temperature Range: 65°C to + 150°C
• Complete PWM Power-Control Circuitry

FR107 Fast recovery SMD diodes box of 3000pcs

Specifications

1. Mounting type: surface mount
2. Current rating: 1A
3. Peak Repet. reverse voltage (Vrrm): 1000V
4. Max. RMS reverse voltage (Vr): 700V
5. Average rectified current (Io): 1.0A
6. Max. reverse current (Ir): 0.005mA
7. Reverse recovery time (Trr): 500ns

104, 50V Multilayer Ceramic Capacitor 0.1UF (1000Pcs)

Specification

1. Part no:  CT4-0805Y104M500
2. CAP: 0.1UF
3. Tolerance Rating: ±20 %
4. Voltage Rating: 50 V
5. Material: Ceramic

T1117-3.3 SOT 223 Voltage Regulator Pack of 100pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 3.267-3.333

BY299 Fast recovery rectifier diode pack of 50pcs

Specifications

0.01μF 103J 630V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V
2. Dimensions = 10.5mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 2500S Ω 

Electronic Spices 1000Pcs 1k Ohm (Ω) 2watt ±5% Tolerance 1k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 1K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 2W
5. Max. operating voltage : 180V to 240V

BC556, -100mA, -65V TO-92 Package General purpose PNP transistor pack of 10 pcs

Specification

1. Type:   Transistor
2. Polarity:   PNP
3. Collector - Emitter voltage: -65volts
4. Collector current:   -100 mA
5. Gain H(fe):  110/800
6. Power dissipation:  625 mW
7. F(t) minimum:  50 MHz
8. Package: TO-92
9. Max Storage & Operating temperature Should Be: -55 to +150 Centigrade

Si2302ds 20V SOT-23 N-Channel Mosfet Pack of 10pcs

Specification :-

• Drian Source Voltage - 20v
• Drian Current - ±8mA
• Static Drain–Source On Resistance - RDS(on)1=VGS=4.5V ID=3.6AmA
• Fast Switching speed
• Case: SOT23