ALL ELECTRONICS COMPONENTS

LM393 Low Power Low Offset Voltage Dual Comparator OP-AMP SMD IC

Specification:-

• IC Name: LM393  
• Supply Voltage: +36 or ±18
• Differential Input Voltage: 36
• Low Input Bias Current: 25 nA
• Low Input Offset Current: 5.0 nA
• Output Voltage: 36
• Output Sink Current: 20
• Output Short Circuit−to−Ground: Continuous
• Input Common Mode Voltage Range: −0.3 to +36
• Storage Temperature Range: −65 to +150

SG3524N Regulating pulse width modulator DIP 16 pin IC pack of 2pcs

Specification

1. Supply voltage range :  8V to 40V
2. Output voltage  :  5V
3. Output current  : 50 mA
4. Dual output
5. Topology  :  Boost, Buck, Fly-back, Forward, Push-Pull
6. Switching frequency :  722 kHz
7. Fall Time :  100 ns

0.0047μF 472J 630V CBB28 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V
2. Dimensions = 15.0mm(W)
3. Dimensions = 13.5mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  QB 1102-03
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 5000M Ω 

0.022μF 223J 250V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 250V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 6.0mm
8. Dimensions of Length : 16.5mm

Electronic Spices 20Pcs 82K Ohm (Ω) 2watt ±5% Tolerance 82K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance : 82K ohm
• Tolerance : 5%
• Resistor type : carbon film
• Power rating : 2W
• Max. operating voltage : 180V to 240V

20K Ohm 3 Pin Round Dial Rotary Potentiometer Pack of 10

Specification:-

• Type Audio Potentiometer
• Power rating: 0.3W
• Type: Rotary
• Resistance: 20K
• Small size 
• Light weight
• Strong wear resistance

SMB, SS36 60V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMB
2. Maximum respective peak reverse voltage : 60v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 100A
6. Maxim forward voltage : 0.70V

Electronic Spices 50Pcs 1.5k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 1.5k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

• Resistance: 1.5K ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%.
• Power rating: 1/4Watt.

HT12E Encoder DIP 18 pins IC for remote control system pack of 50pcs

Specification

1. Function : DIP Encoder IC
2. Number of pin : 18
3. Operating voltage range : 2.4V to 12V
4. Data code has positive polarity
5. Low standby current : 0.1µA at 5V
6. Built-in oscillator
7. Low power and high noise immunity

2N7002 60V SOT-23 Field Effect Transistors Pack of 10pcs

Specification :-

• Drian Source Voltage - 60v
• Drian Current - 115mA
• Static Drain–Source On Resistance - RDS(on)1=VGS=10V ID=800mA
• Fast Switching speed
• Case: SOT23

SS14 1N5819 25A 600V Forward voltage SMD diode pack of 50pcs

Features:-

• The average forward current is 1A
• Forward Surge Current is 25A
• Forward Voltage Drop 600mV at 1A
• The peak reverse voltage is 40V
• RMS Reverse Voltage is 28V

CD4060 14 stage binary ripple counter 16 pins IC pack of 10pcs

Specification

1. 14-bit Binary counter or Divider IC
2. Counting range :  0 to 16383 (In decimal)
3. Operating voltage:  3V to 18V
4. Number of pins: 16
5. Maximum clock frequency: 30MHz at 15V
6. Medium speed operation :  8MHz at VDD = 10V