ALL ELECTRONICS COMPONENTS

Electronic Spices 50Pcs 1.5k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 1.5k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

• Resistance: 1.5K ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%.
• Power rating: 1/4Watt.

SC608N B10K 90mm Single channel linear slide potentiometer pack of 5pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 90mm
4. Travel length : 74mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SG3524N Regulating pulse width modulator DIP 16 pin IC pack of 2pcs

Specification

1. Supply voltage range :  8V to 40V
2. Output voltage  :  5V
3. Output current  : 50 mA
4. Dual output
5. Topology  :  Boost, Buck, Fly-back, Forward, Push-Pull
6. Switching frequency :  722 kHz
7. Fall Time :  100 ns

GBJ6, GBJ3510 35A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 35.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 350A
6. Maxim forward voltage : 1.1V

1N4739A 9.1V 1 watt Zener diode pack of 20pcs

Specification

• Nominal Zener Voltage (VZ): 9.1V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 500mA

472, 50V Multilayer Ceramic Capacitor 4700PF (20Pcs)

Specification

1. Part no:   CT4-0805Y472M500
2. CAP :       4700PF
3. Tolerance Rating: ±20 %
4. Voltage Rating:  50 V
5. Material: Ceramic

0.22μF 224J 400V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V 
2. Dimensions = 14.0mm(W)
3. Dimensions = 12.0mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 15000M Ω

HT12E Encoder DIP 18 pins IC for remote control system pack of 50pcs

Specification

1. Function : DIP Encoder IC
2. Number of pin : 18
3. Operating voltage range : 2.4V to 12V
4. Data code has positive polarity
5. Low standby current : 0.1µA at 5V
6. Built-in oscillator
7. Low power and high noise immunity

0.022μF 223J 250V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 250V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 6.0mm
8. Dimensions of Length : 16.5mm

5KP45 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 50.0V
• Maximum Breakdown voltage: 61.1V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 62A
• Maximum clamping voltage: 80.3V
• Power Dissipation: 5000W
• Package: R-6

TO-92 78L09, 3-Terminal Positive Voltage Regulator IC pack of 10

Specification

1. Output Current Up To 1.5 A
2. Input Voltage 8.6V To 9.4V
3. Thermal Overload Protection Short Circuit Protection
4. 2 % Output Voltage Tolerance
5. Output Transition SOA Protection

0.68μF 684J 400V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V 
2. Dimensions = 25.0mm(W)
3. Dimensions = 15.0mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 20.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 15000M Ω