ALL ELECTRONICS COMPONENTS

ES1J 600V 1A Surface mount glass passivated superfast SMD diode pack of 50pcs

Specification

1. Maximum repetitive reverse voltage: 600V
2. Nonrepetitive peak forward surge current: 30A
3. Maximum forward voltage: 1A
4. Maximum forward current: 1A
5. Power dissipation: 1.47W
6. Reverse recovery time: 35ns

TLC5940 16-Channel PWM Control LED Driver IC (DIP-28 Package)

Specification:-

• No. of Channels: 16
• CMOS Level I/O
• 30 MHz Data Transfer Rate
• Supply voltage range: 3.V to 5.5V
• Drive Capability: 0 mA to 60 mA (VCC < 3.6 V)
• Thermal error flagging

SC6021G A50K 75mm Dual channel linear slide potentiometer pack of 5 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 50KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

MQ4 Methane, CNG and flammable gas detection sensors pack of 5pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Target gas : Methane
4. Sensing resistance  :  2kΩ to 20KΩ
5. Load resistance  :  200kΩ (Adjustable)
6. Heating consumption  :  lower than 750mW
7. Concentration scope : 200 to 10,000ppm

2N7002 60V SOT-23 Field Effect Transistors Pack of 10pcs

Specification :-

• Drian Source Voltage - 60v
• Drian Current - 115mA
• Static Drain–Source On Resistance - RDS(on)1=VGS=10V ID=800mA
• Fast Switching speed
• Case: SOT23

Light dependents resistor sensors 20 mm (LDR) GL20528 pack of 50pcs

Specification

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  500V
5. Max. power  :  500W
6. Package includes : 50 pieces

472, 50V Multilayer Ceramic Capacitor 4700PF (20Pcs)

Specification

1. Part no:   CT4-0805Y472M500
2. CAP :       4700PF
3. Tolerance Rating: ±20 %
4. Voltage Rating:  50 V
5. Material: Ceramic

50Pcs 18k Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 18k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 18K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

BA159 1.3A 1000V Inverse voltage diode pack of 20pcs

Specifications:-

1. Fast switching for high efficiency,
2. Low forward voltage drop,
3. Low leakage current,
4. High forward surge capability,
5. Max. repetitive peak reverse voltage : 1000V
6. Max. RMS voltage : 700V
7. Max. DC blocking voltage : 1000v

S2M 1000V 2A Surface mount glass passivated superfast SMD diodes box of 3000pcs

Specification

1. Max. repetitive reverse voltage: 1000V
2. Forward current: 2A
3. Power dissipation: 2.35Watt
4. Max. peak forward surge current: 50A
5. Max. DC reverse current: 125µA

KBU, KBU6A 6A 50V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBU
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 6.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 250A
6. Maxim forward voltage : 1.1V

TO-92 78L12, 3-Terminal Positive Voltage Regulator IC pack of 5pcs

Specification

1. Output Current Up To 1.5 A
2. Input Voltage 11.5V To 12.5V
3. Thermal Overload Protection Short Circuit Protection
4. 2 % Output Voltage Tolerance
5. Output Transition SOA Protection