ALL ELECTRONICS COMPONENTS

SYB-170 Yellow color 170 points Mini solderless breadboard for prototype circuit pack of 5pcs

Specification

1. Tie points : 170
2. Color of the board : YELLOW
3. Dimensions : 47mm Length x 35mm breadth
4. Mounting holes : M2
5. Accepts 20-29 AWG wire sizes
6. Use to make the base of the prototype circuit
7. Reusable, solderless, and easy to use

200 ohm ( Ω ) multi turn trimpot variable resistors 3296W-1-201LF pack of 20pcs

Specifications

1. Type: multi-turn variable resistor
2. Resistance value: 200 Ω
3. Tolerance: ±10 %
4. Temperature Range: -55 °C to +125 °C
5. Rotational Life: 200 cycles

GBJ6, GBJ3510 35A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 35.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 350A
6. Maxim forward voltage : 1.1V

3300uf 25V Aluminum Electrolytic Capacitors (16 X 31.5 mm) pack of 5pcs

Specification

• Rating Voltage = 25V
• Material = Aluminum
• Capacitor Size = 16 x 31.5 mm
• Impedance (O)max. 20°C 1000KHz = 22
• Ripple current = 2000
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

4.7uf / 250V Aluminum Electrolytic Capacitors (8 X 11.5)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 8 X 11.5mm
4. Voltage Rating :  250V
5. Capacitance: 4.7uf
6. Capacitance tolerance : ±20%(M)

6800uf / 25V Aluminum Electrolytic Capacitors (25 x 50)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 25 x 50mm
4. Voltage Rating :  25V
5. Capacitance: 6800uf
6. Capacitance tolerance : ±20%(M)

MPSA13 500mA 30V TO-92 Package NPN Darlington Transistors pack of 10

Specification

1. Package Type: TO-92
2. Transistor Type: NPN Darlington
3. Max Collector Current (IC): 500 mA
4. Max Collector-Emitter Voltage (VCE): 30V
5. Max Collector-Base Voltage (VCB): 30V
6. Max Emitter-Base Voltage (VEBO): 10V
7. Max Collector Dissipation (Pc): 625 milliWatt
8. Max Transition Frequency (fT): 125 MHz
9. Minimum & Maximum DC Current Gain (hFE): 5000
10. Max Storage & Operating temperature Should Be: -55 to +150 Centigrade

PJ494CD Switch mode PWM control circuit DIP 16 pins IC pack of 10pcs

Specification

1. Complete PWM Power Control Circuitry
2. Supply voltage : 20V to 40V
3. Collector output current : 250mA
4. Oscillator frequency :  300 kHz
5. Output voltage :  5V
6. Load regulation : 15mV

R-6, 6A4 400V General Purpose Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 400v
2. Maximum average rectified current : 6.0A
3. Maxim reverse current : 10µA
4. Case :  R-6
5. Non-Repetitive Peak Forward Surge Current : 400A
6. Operating Junction Temperature Range : − 65 to +150°C 
7. Maxim forward voltage : 0.95V

L293D Quadruple half-H driver or motor driver 16 pins IC pack of 50pcs

Specification

1. Quadruple high current half-H driver IC
2. Or motor driver IC
3. Supply voltage : 5V to 7V
4. Output voltage : 5V to 36V
5. Max. current : 600mA
6. Number of pin : 16
7. Peak output current : 1.2A

CD4047 Low power monostable astable multi vibrator 14 pins IC pack of 50pcs

Specifications

1. Low power multi vibrator circuit IC
2. Operate in both Monostable and Astable operation
3. Supply voltage range : 3V to 15V
4. DC input current  :  10mA
5. Number of pins : 14
6. Low power consumption
7. High noise immunity

TLC5940 16-Channel PWM Control LED Driver IC (DIP-28 Package)

Specification:-

• No. of Channels: 16
• CMOS Level I/O
• 30 MHz Data Transfer Rate
• Supply voltage range: 3.V to 5.5V
• Drive Capability: 0 mA to 60 mA (VCC < 3.6 V)
• Thermal error flagging