ALL ELECTRONICS COMPONENTS

DO-15, R5000F 5000V High Voltage Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 5000v
2. Maximum average rectified current : 0.2A
3. Maxim reverse current : 5.0µA
4. Case :  DO-41
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 6.5V
7. Maximum reverse recovery time : 500ns

CD4053BE Triple 2 channel analog multiplexer DIP 16 pins IC pack of 10pcs

Specification

1. Wide range of digital and analog signal levels
   1. Digital : 3 V to 20V
   2. Analog : ≤ 20V_P-P
2. Gain bandwidth : 30MHz
3. Current leakage : 100nA
4. Channel to channel matching : 5Ω (ohm)
5. On state resistance : 240 Ω ( ohm )

SYB-170 Green color 170 points Mini solderless breadboard for prototype circuit pack of 5pcs

Specification

1. Tie points : 170
2. Color of the board : GREEN
3. Dimensions : 47mm Length x 35mm breadth
4. Mounting holes : M2
5. Accepts 20-29 AWG wire sizes
6. Use to make the base of the prototype circuit
7. Reusable, solderless, and easy to use

GBJ6, GBJ3510 35A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 35.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 350A
6. Maxim forward voltage : 1.1V

1.5K ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 1.5K ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

6800uf / 25V Aluminum Electrolytic Capacitors (25 x 50)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 25 x 50mm
4. Voltage Rating :  25V
5. Capacitance: 6800uf
6. Capacitance tolerance : ±20%(M)

L293D Quadruple half-H driver or motor driver 16 pins IC pack of 50pcs

Specification

1. Quadruple high current half-H driver IC
2. Or motor driver IC
3. Supply voltage : 5V to 7V
4. Output voltage : 5V to 36V
5. Max. current : 600mA
6. Number of pin : 16
7. Peak output current : 1.2A

12MHz Electronic quartz crystal oscillator KDS12.000 through hole 2 pins pack of 20pcs

Specification:-

1. High-quality product
2. Load Capacitance  :  18pF
3. Frequency Tolerance  :  30ppm
4. Frequency Temperature Stability  :  20ppm
5. Resonance Resistance  :  40 ohms
6. High frequency of operation
7. Automatic amplitude control and frequency drift

6.8μF 685J 250V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 250V
• Dmax = 19.5mm
• Lmax = 33.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

3300uf 25V Aluminum Electrolytic Capacitors (16 X 31.5 mm) pack of 5pcs

Specification

• Rating Voltage = 25V
• Material = Aluminum
• Capacitor Size = 16 x 31.5 mm
• Impedance (O)max. 20°C 1000KHz = 22
• Ripple current = 2000
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

LM393 Low Power Low Offset Voltage Dual Comparator OP-AMP SMD IC

Specification:-

• IC Name: LM393  
• Supply Voltage: +36 or ±18
• Differential Input Voltage: 36
• Low Input Bias Current: 25 nA
• Low Input Offset Current: 5.0 nA
• Output Voltage: 36
• Output Sink Current: 20
• Output Short Circuit−to−Ground: Continuous
• Input Common Mode Voltage Range: −0.3 to +36
• Storage Temperature Range: −65 to +150

PJ494CD Switch mode PWM control circuit DIP 16 pins IC pack of 10pcs

Specification

1. Complete PWM Power Control Circuitry
2. Supply voltage : 20V to 40V
3. Collector output current : 250mA
4. Oscillator frequency :  300 kHz
5. Output voltage :  5V
6. Load regulation : 15mV