ALL ELECTRONICS COMPONENTS

CD4053BE Triple 2 channel analog multiplexer DIP 16 pins IC pack of 10pcs

Specification

1. Wide range of digital and analog signal levels
   1. Digital : 3 V to 20V
   2. Analog : ≤ 20V_P-P
2. Gain bandwidth : 30MHz
3. Current leakage : 100nA
4. Channel to channel matching : 5Ω (ohm)
5. On state resistance : 240 Ω ( ohm )

SR360 60V 3A Schottky barrier rectifier SMD diodes box of 2000pcs

Specification

1. Max. repetitive reverse voltage: 60V
2. Forward current: 3A
3. Forward voltage: 500V
4. Max. RMS voltage: 28V
5. Max. peak forward surge current: 80A

5KP45 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 50.0V
• Maximum Breakdown voltage: 61.1V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 62A
• Maximum clamping voltage: 80.3V
• Power Dissipation: 5000W
• Package: R-6

1N4738A 8.2V 1 watt Zener diode pack of 20pcs

Specification

• Nominal Zener Voltage (VZ): 8.2V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 550mA

330uf 35V Aluminum Electrolytic Capacitors (10 X 16 mm) Pack of 5pcs

Specification

• Rating Voltage = 35V
• Material = Aluminum
• Capacitor Size = 10 x 16 mm
• Impedance (O)max. 20°C 1000KHz = 41
• Ripple current = 770
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

0.47μF 473J 250V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V
2. Dimensions = 13.5mm(W)
3. Dimensions = 10.0mm(H)
4. Dimensions = 6.5mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

Red color Potentiometer knob Rotary switches caps pack of 50pcs

Specifications

1. Material: Bakelite
2. Color: Red and Black
3. Uses : φ6-axis potentiometer, band switches, buttons, and so on
4. Spot : Shaft hole 6mm 6.4mm
5. Diameter : 16mm (approx)
6. Height : 15mm (approx)
7. Fixation : By pressing down

1000 Pcs 220K Ohm (Ω) 1 Watt ±5% Tolerance 220K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 220K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

1.5K ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 1.5K ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

SN74HC04N Hex inverters low power DIP 14 pins IC pack of 50pcs

Specification

1. Consist of six independent inverters
2. Supply voltage range: 2V to 6V
3. Input clamp current : 20mA
4. Power dissipation capacitance per inverter (no loads) : 20pF
5. Continuous output current : 50mA
6. Low Power Consumption : 20-µA

BY299 Fast recovery rectifier diode pack of 20pcs

Specifications

CD4047 Low power monostable astable multi vibrator 14 pins IC pack of 50pcs

Specifications

1. Low power multi vibrator circuit IC
2. Operate in both Monostable and Astable operation
3. Supply voltage range : 3V to 15V
4. DC input current  :  10mA
5. Number of pins : 14
6. Low power consumption
7. High noise immunity