ALL ELECTRONICS COMPONENTS

2902N Single supply quad operational amplifier DIP 14 pins IC pack of 50pcs

Specification

1. Single supply
2. High output voltage
3. Supply voltage :  16V to 32V
4. Power dissipation : 300mW
5. Number of pins : 14
6. Slew rate : 0.5V/μs
7. low operating voltage : 1mA

1N5819S 40V ,A-405 Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 40V
• Maximum average rectified current : 1.0A
• Peak forward surge current 8.3ms single half sine- wave : 25A
• Maximum reverse current @ VRRM TA = 25°C : 0.5mA 
• Package : A-405

1000 Pcs 4.7 Ohm (Ω) 1 Watt ±5% Tolerance 4.7 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 4.7 ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

332, 50V Multilayer Ceramic Capacitor 3300PF (20Pcs)

Specification

1. Part no:   CT4-0805Y332M500
2. CAP:        3300PF
3. Tolerance Rating: ±20 %
4. Voltage Rating:  50 V
5. Material: Ceramic

0.068μF 683J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 29.0mm(W)
• Dimensions = 21.0mm(H)
• Dimensions = 13.0mm(T)
• Dimensions = 24.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

2SK3018 30V SOT-23 Field Effect Transistors Pack of 10pcs

Specification :-

• Drian Source Voltage - 30v
• Drian Current - 100mA
• Static Drain–Source On Resistance - RDS(on)1=VGS=4.0V ID=10mA
• Fast Switching speed
• Case: SOT23

1μF 63V Polyester Film Capacitor Pack of 10pcs

Specification:-

• Capacitor Value: 1uF
• Tolerance: ±5%
• Rated Voltage: 63V
• Type: Polyester Film Capacitor

0.68μF 684J 400V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V 
2. Dimensions = 25.0mm(W)
3. Dimensions = 15.0mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 20.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 15000M Ω

BC368 1A 20V TO-92 Package General purpose NPN transistor pack of 10 pcs

Specification

1. Collector-Emitter Voltage (VCEO): 20V
2. Continuous Collector Current (IC):  1A
3. Transition Frequency (fT):  65MHz
4. DC Current Gain (hFE): 85-375
5. Operating Temperature Range: -55 - 150°C
6. Transistor type  :  NPN Transistor

MPSA94, -300mA, -400V TO-92 Package PNP Darlington Transistors pack of 10 pcs

Specification

1. Package Type: TO-92
2. Transistor Type: PNP Darlington
3. Max Collector Current(IC): -300mA
4. Max Collector-Emitter Voltage (VCE): -400V
5. Max Collector-Base Voltage (VCB): 30V
6. Max Emitter-Base Voltage (VEBO): 10V
7. Max Collector Dissipation (Pc): 625 milliWatt
8. Max Transition Frequency (fT): 50 MHz
9. Minimum & Maximum DC Current Gain (hFE): 50/300
10. Max Storage & Operating temperature Should Be: -55 to +150 Centigrade

0.3 inch 2 digit Red display color 7 segment LED display COMMON CATHODE pack of 5pcs

Specification:-

1. Number of digit : 2
2. Display type : 7 segment
3. Configuration : common cathode
4. Number of pins : 10
5. LED color : Red
6. Operating current : 10mA
7. Length of the LED : 15mm
8. Width of the LED : 14mm

50Pcs 5.6 Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 5.6 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance: 5.6 ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%
• Power rating: 1/2Watt
• Maximum working voltage: 250V