ALL ELECTRONICS COMPONENTS

SN74HC04N Hex inverters low power DIP 14 pins IC pack of 10pcs

Specification

1. Consist of six independent inverters
2. Supply voltage range : 2V to 6V
3. Input clamp current : 20mA
4. Power dissipation capacitance per inverter (no loads) : 20pF
5. Continuous output current : 50mA
6. Low Power Consumption : 20-µA

2902N Single supply quad operational amplifier DIP 14 pins IC pack of 50pcs

Specification

1. Single supply
2. High output voltage
3. Supply voltage :  16V to 32V
4. Power dissipation : 300mW
5. Number of pins : 14
6. Slew rate : 0.5V/μs
7. low operating voltage : 1mA

0.068μF 683J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 29.0mm(W)
• Dimensions = 21.0mm(H)
• Dimensions = 13.0mm(T)
• Dimensions = 24.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

KTA1505 150mA 30V SOT-23 PNP Bipolar transistors pack of 5 pcs

Specification

1. Type of transistor: PNP
2. Polarisation: bipolar
3. Collector-emitter voltage: 30V
4. Power dissipation: 150mW
5. Case: SOT23
6. Frequency: 150MHz
7. Gain H(fe): 70/400
8. Collector current:  150mA

MPSA94, -300mA, -400V TO-92 Package PNP Darlington Transistors pack of 10 pcs

Specification

1. Package Type: TO-92
2. Transistor Type: PNP Darlington
3. Max Collector Current(IC): -300mA
4. Max Collector-Emitter Voltage (VCE): -400V
5. Max Collector-Base Voltage (VCB): 30V
6. Max Emitter-Base Voltage (VEBO): 10V
7. Max Collector Dissipation (Pc): 625 milliWatt
8. Max Transition Frequency (fT): 50 MHz
9. Minimum & Maximum DC Current Gain (hFE): 50/300
10. Max Storage & Operating temperature Should Be: -55 to +150 Centigrade

50Pcs 5.6 Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 5.6 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance: 5.6 ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%
• Power rating: 1/2Watt
• Maximum working voltage: 250V

3K ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 3K ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

470uf 10V Aluminum Electrolytic Capacitors (8 X 11.5 mm) pack of 5pcs

Specification

• Rating Voltage = 10V
• Material = Aluminum
• Capacitor Size = 8 x 11.5 mm
• Impedance (O)max. 20°C 1000KHz = 72
• Ripple current = 400
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

LM833 Dual Low Noise Audio Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply Voltage (VCC to VEE): 36 V
• Input Differential Voltage Range: 30 V
• Input Voltage Range: ±15 V
• Power Dissipation: 500 m W
• Low Voltage Noise: 4.5 nV/ Hz
• High Gain Bandwidth Product: 15 MHz
• Storage temperature range: –65°C to150 °C

BC337 Amplifier NPN transistors pack of 100pcs

Specification:-

1. Transistor type  :  General Purpose NPN Amplifier Transistor
2. Current Gain  :  100 to 630
3. Continuous Collector current  :  800mA
4. Collector-Emitter voltage  :  45 V
5. Collector-Base voltage  :  50V
6. Emitter Base Voltage  :  5V

SC458G A10K 75mm Dual channel linear slide potentiometer pack of 5 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 60mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

450uf 82V Polarized Electrolytic Capacitor

Specification

• Terminals: 2
• Material: Aluminium
• Voltage Rating :  82 V
• Capacitance: 450uf
• Smooth noise