ALL ELECTRONICS COMPONENTS

1000 Pcs 4.7 Ohm (Ω) 1 Watt ±5% Tolerance 4.7 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 4.7 ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

SC458G A10K 75mm Dual channel linear slide potentiometer pack of 5 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 60mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

SN74HC04N Hex inverters low power DIP 14 pins IC pack of 10pcs

Specification

1. Consist of six independent inverters
2. Supply voltage range : 2V to 6V
3. Input clamp current : 20mA
4. Power dissipation capacitance per inverter (no loads) : 20pF
5. Continuous output current : 50mA
6. Low Power Consumption : 20-µA

KTA1505 150mA 30V SOT-23 PNP Bipolar transistors pack of 5 pcs

Specification

1. Type of transistor: PNP
2. Polarisation: bipolar
3. Collector-emitter voltage: 30V
4. Power dissipation: 150mW
5. Case: SOT23
6. Frequency: 150MHz
7. Gain H(fe): 70/400
8. Collector current:  150mA

470uf 10V Aluminum Electrolytic Capacitors (8 X 11.5 mm) pack of 5pcs

Specification

• Rating Voltage = 10V
• Material = Aluminum
• Capacitor Size = 8 x 11.5 mm
• Impedance (O)max. 20°C 1000KHz = 72
• Ripple current = 400
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

74LS192 Decade Up/Down Counter with Clear SMD IC

Specification:-

• Mounting: SMD
• Frequency: 40 MHz
• Power Dissipation: 95 mW
• Supply Voltage range: 4.5 to 5.5V
• Output Current (High): -0.4mA
• Output Current (Low): 8mA
• Operating Temperature: -55°C to 125°C

50Pcs 5.6 Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 5.6 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance: 5.6 ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%
• Power rating: 1/2Watt
• Maximum working voltage: 250V

0.3 inch 2 digit Red display color 7 segment LED display COMMON CATHODE pack of 5pcs

Specification:-

1. Number of digit : 2
2. Display type : 7 segment
3. Configuration : common cathode
4. Number of pins : 10
5. LED color : Red
6. Operating current : 10mA
7. Length of the LED : 15mm
8. Width of the LED : 14mm

BC337 Amplifier NPN transistors pack of 100pcs

Specification:-

1. Transistor type  :  General Purpose NPN Amplifier Transistor
2. Current Gain  :  100 to 630
3. Continuous Collector current  :  800mA
4. Collector-Emitter voltage  :  45 V
5. Collector-Base voltage  :  50V
6. Emitter Base Voltage  :  5V

4700uf 25V Aluminum Electrolytic Capacitors (18 X 35.5 mm) pack of 5pcs

Specification

• Rating Voltage = 25V
• Material = Aluminum
• Capacitor Size = 18 x 35.5 mm
• Impedance (O)max. 20°C 1000KHz = 20
• Ripple current = 2200
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

MPSA94, -300mA, -400V TO-92 Package PNP Darlington Transistors pack of 10 pcs

Specification

1. Package Type: TO-92
2. Transistor Type: PNP Darlington
3. Max Collector Current(IC): -300mA
4. Max Collector-Emitter Voltage (VCE): -400V
5. Max Collector-Base Voltage (VCB): 30V
6. Max Emitter-Base Voltage (VEBO): 10V
7. Max Collector Dissipation (Pc): 625 milliWatt
8. Max Transition Frequency (fT): 50 MHz
9. Minimum & Maximum DC Current Gain (hFE): 50/300
10. Max Storage & Operating temperature Should Be: -55 to +150 Centigrade

Electronic Spices 20Pcs 2.2K Ohm (Ω) 2watt ±5% Tolerance 2.2K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 2.2K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 2W
5. Max. operating voltage : 180V to 240V