ALL ELECTRONICS COMPONENTS

474, 50V Multilayer Ceramic Capacitor 0.47UF (1000Pcs)

Specification

1. Part no:   CT4-0805Y474M500
2. CAP:         0.47UF
3. Tolerance Rating: ±20 %
4. Voltage Rating: 50 V
5. Material: Ceramic

4.7μF 475J 100V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

1. Rated voltage = 100V
2. Dmax = 15.0mm
3. Lmax = 33.0mm
4. Reference Category = GB 7332 (IEC 384-2)
5. Climatic Category = 40/085/21
6. Voltage Proof = 1.6UR (5s)
7. Dissipation Factor = ≤1.0% (20°C, 1KHz)

DO-15, SF28 600V Super Fast Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 600v
2. Maximum average rectified current : 2.0A
3. Maxim reverse current : 5.0µA
4. Case :  DO-15D
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 1.7V
7. Maximum reverse recovery time : 35ns

24C08 8K Bit standard 2 wire bus interface serial DIP 8 pins IC pack of 50pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 1024 x 8 bits for each

100uf / 16V Electrolytic Capacitors (5 X 11mm) Pack of 5

Specification:-

• Capacitor Value: 100
• Voltage: 16V
• Operating temperature: -40ºC to 125ºC
• Tolerance: ±20%
• Size: 5x11

US2M 1000V 2A Surface mount high efficient rectifier SMD diodes box of 2000pcs

TO-92 78L05, 3-Terminal Positive Voltage Regulator IC pack of 10

Specification

1. Output Current Up To 1.5 A
2. Output Voltages 5 Volt Input Voltage 4.8V To 5.2V
3. Thermal Overload Protection Short Circuit Protection
4. 2 % Output Voltage Tolerance
5. Output Transition SOA Protection

T1117-2.5 SOT 223 Voltage Regulator Pack of 5pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 2.475 - 2.525

7cm x 3cm Copper clad double side universal printed circuit board or PCB pack of 5pcs

Specification

1. Copper clad coating PCB
2. Dimension : 7cm x 3cm
3. Board thickness : 1.6 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

1000 Pcs 150K Ohm (Ω) 1 Watt ±5% Tolerance 150K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:-

1. Resistance : 150K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

2N6292 NPN Transistors 70V (TO-220 Package) Pack of 5

• Transistor Polarity - NPN
• Collector-Emitter Voltage (VCEO) - 70V
• Continuous Base Current (IB) - 2A
• Continuous Collector Current (IC) - 3A
• Emitter cut-off current (IC) - 500mA
• DC Current Gain (hFE) - 2
• Operating Temperature Range - (-65 - 150°C)
• Transition Frequency (fT) - 4MHz

0.33μF 334J 400V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard: GB 10190 (IEC 384-16) 
2. Rated voltage: 400V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 11.5mm
8. Dimensions of Length : 28.0mm