ALL ELECTRONICS COMPONENTS

0.33μF 334J 400VAC CBB62 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400 VAC
• Dimensions = 30.0mm(W)
• Dimensions = 23.5mm(H)
• Dimensions = 14.5mm(T)
• Dimensions = 25.0mm(P)
• Dimensions = 0.8(d)
• Reference Standard  =  GB/T 14472-98 (IEC 384-14)
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.001 (1kHz, 20°C)

4700uf / 25V Aluminum Electrolytic Capacitors (16 X 31.5)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 16 X 31.5mm
4. Voltage Rating :  25V
5. Capacitance: 4700uf
6. Capacitance tolerance : ±20%(M)

1N4738A 8.2V 1 watt Zener diodes box of 2500pcs

Specification

• Nominal Zener Voltage (VZ): 8.2V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 550mA

1N4733A 5.1V 1 watt Zener diodes box of 2500pcs

Specification

• Nominal Zener Voltage (VZ): 5.1V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 890mA

500K ohm ( Ω ) vertical preset variable resistors ( 504 ) pack of 50pcs

Specifications

1. Type                                  : Preset variable resistor (trimpot)
2. Resistance value             : 500K Ω
3. Max. operating voltage : 50V DC
4. Rotation                           : single turn
5. Resistance Tolerance    : ±30%
6. Rotational cycles            : 20 cycles

5K ohm ( Ω ) multi turn trimpot variable resistors 3296W-1-502LF pack of 50pcs

Specifications:-

1. Type: Multi turn variable resistor
2. Resistance value        : 5K Ω
3. Tolerance                    : ±10 %
4. Temperature Range  : -55 °C to +125 °C
5. Rotational Life           : 200 cycles

5mm Mercury switch tilt angle sensors Unidirectional electric induction switch pack of 10pcs

Specifications

1. Operating voltage : 3.3V to 5V
2. Output format : Digital switching outputs (0 and 1)
3. Capsule diameter : 5mm
4. Low cost solution for inclinometer
5. Mercury conduction method

7cm x 3cm Copper clad double side universal printed circuit boards or PCB pack of 10pcs

Specification

1. Copper clad coating PCB
2. Dimension : 7cm x 3cm
3. Board thickness : 1.6 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

BC818 800mA 25V TO-92 Package General purpose NPN transistor pack of 10 pcs

Specification

1. Collector-Emitter Voltage (VCEO) 25V
2. Continuous Collector Current (IC) 800mA
3. Transition Frequency (fT) 250MHz
4. DC Current Gain (hFE) 100-630
5. Operating Temperature Range -55 - 150°C
6. Transistor type  :  NPN Transistor

24C16 16K Bit standard 2 wire bus interface serial DIP 8 pins IC pack of 50pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes

T1117-2.5 SOT 223 Voltage Regulator Pack of 5pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 2.475 - 2.525

10K dual gang rotary potentiometer (A10, B10) D shape shaft handle 6 pin pack of 5pcs

Specification:-

• Type : dual gang rotary potentiometer
• Resistance value : 10K
• Shaft : D shape shaft
• Maximum Input Voltage  :  200Vdc
• Rotational Life :  2000K cycles