ALL ELECTRONICS COMPONENTS

24K ohm 1206 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 1206
2. Resistance : 24K
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

11MHz Electronic quartz crystal oscillator KDS11.0592 through hole 2 pins pack of 20pcs

Specification:-

1. High-quality product
2. Load Capacitance  :  18pF
3. Frequency Tolerance  :  30ppm
4. Frequency Temperature Stability  :  20ppm
5. Resonance Resistance  :  40 ohms
6. High frequency of operation
7. Automatic amplitude control and frequency drift

30K ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 1206
2. Resistance : 30K
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

0.10μF 104J 100V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

1. Rated voltage = 100V
2. Dmax = 5.0mm
3. Lmax = 13.0mm
4. Reference Category = GB 7332 (IEC 384-2)
5. Climatic Category = 40/085/21
6. Voltage Proof = 1.6UR (5s)
7. Dissipation Factor = ≤1.0% (20°C, 1KHz)

47uf 50V Aluminum Electrolytic Capacitors (6.3 X 11 mm) Pack of 5pcs

Specification

• Rating Voltage = 50V
• Material = Aluminum
• Capacitor Size = 6.3 x 11 mm
• Impedance (O)max. 20°C 1000KHz = 140
• Ripple current = 250
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

220uf 450V Aluminum Electrolytic Capacitors (35 x 35mm) Pack of 5pcs

Specification

• Rating Voltage = 450V
• Material = Aluminum
• Capacitor Size = 35 x 35mm
  
• Ripple current = 1.55
  
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for "Endurance"

12cm x 6.5cm Copper Clad Single Side 1mm Pitch General Purpose Printed Circuit (PCB)

Specification:-

• Copper-clad coating PCB
• Dimension: 12cm x  6.5cm
• Board thickness: 1mm
• Shape: Rectangle
• Circuit printing: Single side
• High wear and tear properties
• Excellent heat resistance

2.2 ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 2.2 ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

SOT-23, ISS196 80V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : SOT-23
2. Maximum respective peak reverse voltage : 80v
3. Maximum average rectified current : 100A
4. Maxim reverse current : 0.5µA
5. Maxim forward voltage : 1.2V

47uF 1206 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 1206
• Capacitance : 47uF
• Tolerance :  ±  5%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

1N4739A 9.1V 1 watt Zener diodes box of 2500pcs

Specification

• Nominal Zener Voltage (VZ): 9.1V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 500mA

0.47μF 474J 250V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 250V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 10.5mm
8. Dimensions of Length : 28.0mm