ALL ELECTRONICS COMPONENTS

AD633 Analog Multiplier SMD IC

Specification:-

• Mounting: SMD
• Number of: 8 Pins
• 4-quadrant multiplication
• Laser-trimmed 10 V scaling reference
• High impedance unity-gain summing input
• Low cost, 8-lead SOIC and PDIP packages

1N4739A 9.1V 1 watt Zener diodes box of 2500pcs

Specification

• Nominal Zener Voltage (VZ): 9.1V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 500mA

20K ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 20K ohm
3. Tolerance :  ± 5%
4. Element type : Thick film chip
5. Operating voltage range : 180V to 220V

0.0082μF 822K 100V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 7.3mm(W)
3. Dimensions = 8.0mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 5.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

0.22μF 224J 250V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V
2. Dimensions = 20.0mm(W)
3. Dimensions = 12.5mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 15.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω

KBPC25, KBPC2506 25A 600V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25
2. Maximum respective peak reverse voltage : 600v
3. Maximum average rectified current : 25.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 300A
6. Maxim forward voltage : 1.1V

SMB(G), SK56 60V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMA(G)
2. Maximum respective peak reverse voltage : 60v
3. Maximum average rectified current : 5.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 0.70V

SS110 100V 1A Surface mount Schottky barrier rectifier SMD diodes box of 2000pcs

3.3V 0.5 Watt 1N4728A Zener Diode ±5% voltage tolerance pack of 2500

Specification

1. High reliability
2. Very sharp reverse characteristic
3. Vz-tolerance: + 5%
4. Voltage Rating: 3.3V
5. Power Rating: 500mW
6. Storage Temperature : -65 to 175 degree C
7. Power Dissipation : 0.5 Watt

MQ3 Alcohol, Ethanol and smoke detections sensor pack of 10pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Sensing resistance  :  2kΩ to 20KΩ
4. Load resistance  :  200kΩ (Adjustable)
5. Heating consumption  :  lower than 750mW
6. Concentration scope : 200 to 10,000ppm

0.022μF 223J 400V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V
2. Dimensions = 13.0mm(W)
3. Dimensions = 10.0mm(H)
4. Dimensions = 6.0mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

MCP3208 12-Bit 8-Channel A/D Converter (ADC) with SPI Interface IC DIP-16 Package

Specification:-

• Single supply operation: 2.7V – 5.5V
• 100ksps max. sampling rate at VDD = 5V
• 50ksps max. sampling rate at VDD = 2.7V
• Industrial temp range: -40°C to +85°C
• All Inputs and Outputs w.r.t. VSS: -0.6V to VDD +0.6V
• Storage Temperature: -65°C to +150°C
• Ambient temperature with power applied: -65°C to +125°C
• Soldering temperature of leads (10 seconds): +300°C
• ESD Protection On All Pins (HBM): ≥ 4 Kv