ALL ELECTRONICS COMPONENTS

KBPC25, KBPC1001 10A 100V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 10.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 175A
6. Maxim forward voltage : 1.1V

KA2281 5-Dot Dual Led Level Meter Driver 16 DIP IC Pack of 10

Specification:-

• Supply Voltage: 16V
• D Terminal Output Current: 30mA
• Power Dissipation: 600mW
• Operating Temperature: -20°C + 70°C
• Storage Temperature: -40°C + 125°C

220uf 50V Aluminum Electrolytic Capacitors (10 X 16 mm) Pack of 5pcs

Specification

• Rating Voltage = 50V
• Material = Aluminum
• Capacitor Size = 10 x 16 mm
• Impedance (O)max. 20°C 1000KHz = 46
• Ripple current = 770
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

50K ohm ( Ω ) single turn trimpot variable resistors 3386P-1-503LF pack of 20pcs

Specifications

1. Type                            : Single turn variable resistor
2. Resistance value       : 50K Ω
3. Power rating              : 300V
4. Temperature Range : -55 °C to +125 °C
5. Rotational cycle        : 200 cycles

BC237 100mA 45V TO-92 Package General purpose NPN transistor pack of 10 pcs

Specification

1. Collector-Emitter Voltage (VCEO): 45V
2. Continuous Collector Current (IC):  100mA
3. Transition Frequency (fT):  150MHz
4. DC Current Gain (hFE): 120-800
5. Operating Temperature Range: -55 - 150°C
6. Transistor type  :  NPN Transistor

Electronic Spices 5000Pcs 100k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 100k MR Ω ohm MF Through Hole Resistors Axial Lead

1000 Pcs 270 Ohm (Ω) 1 Watt ±5% Tolerance 270 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 270 ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

SYB-170 Blue color 170 points Mini solderless breadboard for prototype circuit pack of 5pcs

Specification

1. Tie points : 170
2. Color of the board : BLUE
3. Dimensions : 47mm Length x 35mm breadth
4. Mounting holes : M2
5. Accepts 20-29 AWG wire sizes
6. Use to make the base of the prototype circuit
7. Reusable, solderless, and easy to use

CA3130 CMOS Op-Amplifier IC (DIP-8 Package)

Specification:-

• DC Supply Voltage: 16 V
• Differential Input Voltage: 8 V
• DC Input Voltage: (V+ +8V) to (V- -0.5V)
• Input-Terminal Current: 1mA
• Operating Temperature Range: -50°C to 125°C
• Output Short-Circuit Duration: Indefinite

SR240 40V 2A Schottky barrier rectifier SMD diodes box of 2000pcs

Specification

1. Max. repetitive reverse voltage: 40V
2. Forward current: 2A
3. Max. RMS voltage: 28V
4. Max. peak forward surge current: 50A
5. Max. DC reverse current: 500uA

GPF X2 0.33µF K 275VAC Electromagnetic Interference Suppression Capacitor pack of 5pcs

Specification

1. Rated voltage : 275VAC
2. Dimensions = 26.5mm(W)
3. Dimensions = 17.0mm(H)
4. Dimensions = 8.5mm(T)
5. Dimensions = 22.5mm(P)
6. Standard  =  GB/T 14472-98
7. Capacitance Tolerance = ±5%(K)
8. Insulation Resistance = > 15000M Ω

0.47μF 63V Metallized Polyester Film Capacitor Pack of 5

Specification:-

• Rated voltage: 63V
• Capacitance: 0.47
• Dimensions = 5mm(W)
• Dimensions = 7mm(H) 
• Dimensions = 3mm(T)
• Dimensions = 4mm(P)
• Capacitance Tolerance = ±5%(J)