ALL ELECTRONICS COMPONENTS

25 ohm ( Ω ) 5 watts Fusible ceramic cement power resistors pack of 250pcs

Specifications

1. Resistance : 25 ohm (Ω)
2. Tolerance : 5%
3. Resistor type : fusible ceramic cement power resistor
4. Power rating : 5W
5. Can withstand in high-energy and high-voltages at high temperatures
6. Reliable and offers a long service life

0.018μF 183J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 19.0mm(W)
• Dimensions = 17.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 13.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

L298N Dual Full Bridge Driver IC Multiwatt-15 Package

Specification:-

• Supply voltage: 50 V
• Logic supply voltage: 7 V
• Ven-Input and Enable Voltage: -0.3 to 7 V
• Vsens-Sensing Voltage: -1 to 2.3
• Ptot-Total Power Dissipation: 25 W
• Junction temperature range: -25 to 130 °C
• Storage temperature range: -40 to 150 °C

100K potentiometer D shaft handle 3 pin pack of 20pcs

specification

1. Type : Single turn potentiometer
2. Resistance value : 100K
3. Power rating : 0.3W
4. Shaft : D shape shaft
5. Maximum Input Voltage  :  200Vdc
6. Rotational Life :  2000K cycles

1000uf / 50V Aluminum Electrolytic Capacitors (25 x 25)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 25 x25mm
4. Voltage Rating :  50V
5. Capacitance: 1000uf
6. Capacitance tolerance : ±20%(M)

0.56 inch 2 digit Green display color 7 segment LED display COMMON ANODEs pack of 20pcs

Specification

1. Number of digit : 2
2. Display type : 7 segment
3. Configuration : common anode
4. Number of pins : 10
5. LED color : Green
6. Operating current : 10mA
7. Length of the LED : 25mm
8. Width of the LED : 19mm

DBS, DB101S 1A 50V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : DBS
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 1.1V

2000 Pcs 220K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 220K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 220K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

MMBT3906LT1 PNP SOT-23 Bipolar Transistors Pack of 5

Specification:-

1. Type of transistor: PNP
2. Polarity: Bipolar
3. Collector-emitter voltage (BVCEO): 40V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 250MHz
7. Gain H(fe): 100/300
8. Collector current:  200mA

IRF840 500V 8A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 500V
• Continuous Drain Current (Id): 8A
• Drain-Source Resistance (Rds On): 850mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 39 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 125W

Electronic Spices 50Pcs 39k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 39k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 39K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

GBJ6, GBJ1001 100V 10A Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 10.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 170A
6. Maxim forward voltage : 1.05V