ALL ELECTRONICS COMPONENTS

Electronic Spices 20Pcs 1.2K Ohm (Ω) 2watt ±5% Tolerance 1.2K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 1.2K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 2W
5. Max. operating voltage : 180V to 240V

BZV55-C18 (SMD) 18V 0.5 watt Zener diodes box of 2500pcs

Features:-

• Non-repetitive peak reverse power dissipation: ≤ 40 W
• Total power dissipation: ≤ 500 mW
• Voltage tolerance : ±5 %
• Working voltage : 18V
• Low differential resistance
• Small hermetically sealed glass SMD packageLow-power voltage regulator diodes in small hermetically sealed glass SOD80C Surface-Mounted Device (SMD) packages.

SC6080GH A50K 75mm Single channel linear slide potentiometer pack of 5pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 50KΩ
3. Total length of the pot : 75mm
4. Travel length : 67mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

0.47μF 63V Metallized Polyester Film Capacitor Pack of 5

Specification:-

• Rated voltage: 63V
• Capacitance: 0.47
• Dimensions = 5mm(W)
• Dimensions = 7mm(H) 
• Dimensions = 3mm(T)
• Dimensions = 4mm(P)
• Capacitance Tolerance = ±5%(J)

1N5822 3A 40V Schottky barrier plastic SMD diodes box of 2000pcs

Specification

1. Max. repetitive reverse voltage : 40V
2. Forward current : 3A
3. Forward surge current : 80A
4. Non-repetitive peak reverse voltage : 48V
5. Max. DC blocking voltage : 40V

7.5K ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 7.5K ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

22K ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 22K ohm
3. Tolerance :  ± 5%
4. Element type : Thick film chip
5. Operating voltage range : 180V to 220V

0.018μF 183J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 19.0mm(W)
• Dimensions = 17.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 13.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMA, S1B 100V Surface Mount General Purpose Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 1.1V

0.56 inch 2 digit Green display color 7 segment LED display COMMON ANODEs pack of 20pcs

Specification

1. Number of digit : 2
2. Display type : 7 segment
3. Configuration : common anode
4. Number of pins : 10
5. LED color : Green
6. Operating current : 10mA
7. Length of the LED : 25mm
8. Width of the LED : 19mm

74HC138 3-to-8 line Decoder/Demultiplexer SMD IC

Specification:-

• Type: Quad
• Mounting: SMD
• Typical propagation delay: 20 ns
• Wide power supply range: 2V–6V
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Voltage: − 1.5 to VCC + 1.5V
• DC Output Voltage: − 0.5 to VCC + 0.5V
• Low quiescent current: 80 µA 

SYB-170 Red color 170 points Mini solderless breadboard for prototype circuit pack of 5pcs

Specification

1. Tie points : 170
2. Color of the board : RED
3. Dimensions : 47mm Length x 35mm breadth
4. Mounting holes : M2
5. Accepts 20-29 AWG wire sizes
6. Use to make the base of the prototype circuit
7. Reusable, solderless, and easy to use