ALL ELECTRONICS COMPONENTS

Electronic Spices 5000Pcs 220 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 220k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 220 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

FMS3 PNP SOT23-5L Bipolar Transistors Pack of 100pcs

Specification :-

• Polarity: PNP
• Maximum Collector-Base Voltage |BVCBO|: 120 V
• Maximum Collector-Emitter Voltage |BVCEO|: 120 V
• Maximum Emitter-Base Voltage |BVEBO|: 50V
• Forward Current Transfer Ratio (hFE), MIN: 120

1.0μF 250J 250V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 250V
• Dmax = 9.5mm
• Lmax = 28.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

3MHz Electronic quartz crystal oscillators KDS3.57954 through hole 2 pins pack of 100pcs

Specification:-

1. High-quality product
2. Load Capacitance:  18pF
3. Frequency Tolerance:  30ppm
4. Frequency Temperature Stability:  20ppm
5. Resonance Resistance:  40 ohms
6. High frequency of operation
7. Automatic amplitude control and frequency drift

0.47μF 63V Metallized Polyester Film Capacitor Pack of 5

Specification:-

• Rated voltage: 63V
• Capacitance: 0.47
• Dimensions = 5mm(W)
• Dimensions = 7mm(H) 
• Dimensions = 3mm(T)
• Dimensions = 4mm(P)
• Capacitance Tolerance = ±5%(J)

1.6 ohm 0805 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 0805
2. Resistance : 1.6 ohm
3. Tolerance :  ± 5%
4. Element type : Thick film chip
5. Operating voltage range : 180V to 220V

150K ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 1206
2. Resistance : 150K
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

74HC138 3-to-8 line Decoder/Demultiplexer SMD IC

Specification:-

• Type: Quad
• Mounting: SMD
• Typical propagation delay: 20 ns
• Wide power supply range: 2V–6V
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Voltage: − 1.5 to VCC + 1.5V
• DC Output Voltage: − 0.5 to VCC + 0.5V
• Low quiescent current: 80 µA 

MCP3208 12-Bit 8-Channel A/D Converter (ADC) with SPI Interface IC DIP-16 Package

Specification:-

• Single supply operation: 2.7V – 5.5V
• 100ksps max. sampling rate at VDD = 5V
• 50ksps max. sampling rate at VDD = 2.7V
• Industrial temp range: -40°C to +85°C
• All Inputs and Outputs w.r.t. VSS: -0.6V to VDD +0.6V
• Storage Temperature: -65°C to +150°C
• Ambient temperature with power applied: -65°C to +125°C
• Soldering temperature of leads (10 seconds): +300°C
• ESD Protection On All Pins (HBM): ≥ 4 Kv

C2482 High voltage NPN transistors box of 2000pcs

Specification

1. Transistor type  :  NPN transistor
2. Collector-Emitter Voltage  :  300V
3. Collector-Base Voltage  :  300V
4. Emitter-Base Voltage  :  7V
5. Collector Current  :  0.1A
6. Collector Dissipation  :  - 0.9W
7. DC Current Gain  :  - 30 to 150

0.047μF 473J 100V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 100V
• Dimensions = 17.0mm(W)
• Dimensions = 13.0mm(H)
• Dimensions = 8.0mm(T)
• Dimensions = 9.5mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SOT-23, ISS226 80V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : SOT-23
2. Maximum respective peak reverse voltage : 80v
3. Maximum average rectified current : 100A
4. Maxim reverse current : 0.5µA
5. Maxim forward voltage : 1.2V