ALL ELECTRONICS COMPONENTS

1K Ohm (Ω) 0.5W, 1/2W PC Pin Through Hole Trimmer Potentiometer (3296P-1-102) Pack of 5

Specification:-

• Resistance: 1k Ω
• Tolerance: ±10%
• Power (Watts): 0.5W, 1/2W
• Number of Turns: 25.0
• Termination Style: PC Pins
• Adjustment Type: Side Adjustment
• Temperature Coefficient: ±100ppm/°C

43K ohm 0805 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 0805
2. Resistance : 43K ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watt
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

Electronic Spices 5000Pcs 3.9k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 3.9k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 3.9K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

SR20100C 100V ,TO-220AB Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 20A
• Peak forward surge current 8.3ms single half sine- wave : 150A
• Maximum reverse current @ VRRM TA = 25°C : 1.0mA 
• Package : TO-220AB

74HC138 3-to-8 line Decoder/Demultiplexer SMD IC

Specification:-

• Type: Quad
• Mounting: SMD
• Typical propagation delay: 20 ns
• Wide power supply range: 2V–6V
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Voltage: − 1.5 to VCC + 1.5V
• DC Output Voltage: − 0.5 to VCC + 0.5V
• Low quiescent current: 80 µA 

2000Pcs 10 Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 10 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance: 10 ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%
• Power rating: 1/2Watt
• Maximum working voltage: 250V

BZV55-C8V2 (SMD) 8.2V 0.5 watt Zener diodes box of 2500pcs

Specification:

• Non-repetitive peak reverse power dissipation: ≤ 40 W
• Total power dissipation: ≤ 500 mW
• Voltage tolerance : ±5 %
• Working voltage : 8.2V
• Low differential resistance
• Small hermetically sealed glass SMD package

220uf 50V Aluminum Electrolytic Capacitors (10 X 16 mm) Pack of 5pcs

Specification

• Rating Voltage = 50V
• Material = Aluminum
• Capacitor Size = 10 x 16 mm
• Impedance (O)max. 20°C 1000KHz = 46
• Ripple current = 770
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

T1117-2.5 SOT 223 Voltage Regulator Pack of 100pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 2.475 - 2.525

KBU, KBU6K 6A 800V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBU
2. Maximum respective peak reverse voltage : 800v
3. Maximum average rectified current : 6.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 250A
6. Maxim forward voltage : 1.1V

2SD596 700mA 25V SOT-23 NPN Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: NPN
2. Polarisation: bipolar
3. Collector-emitter voltage: 25V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 170MHz
7. Gain H(fe): 110/400
8. Collector current:  700mA

0.47/50V Electrolytic Capacitor Pack of 5pcs (5×11)mm

Specification:-

• Capacitor Value – 0.47
• Voltage  - 50V
• Operating temperature: -40ºC to 125ºC
• Tolerance - ±20%
• Size - 5x11