ALL ELECTRONICS COMPONENTS

1000uf 50V Aluminum Electrolytic Capacitors (16 X 25 mm) Pack of 5pcs

Specification

• Rating Voltage = 50V
• Material = Aluminum
• Capacitor Size = 16 x 25 mm
• Impedance (O)max. 20°C 1000KHz = 27
• Ripple current = 1850
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

1K Ohm (Ω) 0.5W, 1/2W PC Pin Through Hole Trimmer Potentiometer (3296P-1-102) Pack of 5

Specification:-

• Resistance: 1k Ω
• Tolerance: ±10%
• Power (Watts): 0.5W, 1/2W
• Number of Turns: 25.0
• Termination Style: PC Pins
• Adjustment Type: Side Adjustment
• Temperature Coefficient: ±100ppm/°C

2000Pcs 10 Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 10 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance: 10 ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%
• Power rating: 1/2Watt
• Maximum working voltage: 250V

GBU, GBU401 4A 100V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBU
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 4.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 1.1V

220uf 50V Aluminum Electrolytic Capacitors (10 X 16 mm) Pack of 5pcs

Specification

• Rating Voltage = 50V
• Material = Aluminum
• Capacitor Size = 10 x 16 mm
• Impedance (O)max. 20°C 1000KHz = 46
• Ripple current = 770
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

MCP3208 12-Bit 8-Channel A/D Converter (ADC) with SPI Interface IC DIP-16 Package

Specification:-

• Single supply operation: 2.7V – 5.5V
• 100ksps max. sampling rate at VDD = 5V
• 50ksps max. sampling rate at VDD = 2.7V
• Industrial temp range: -40°C to +85°C
• All Inputs and Outputs w.r.t. VSS: -0.6V to VDD +0.6V
• Storage Temperature: -65°C to +150°C
• Ambient temperature with power applied: -65°C to +125°C
• Soldering temperature of leads (10 seconds): +300°C
• ESD Protection On All Pins (HBM): ≥ 4 Kv

KBU, KBU6K 6A 800V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBU
2. Maximum respective peak reverse voltage : 800v
3. Maximum average rectified current : 6.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 250A
6. Maxim forward voltage : 1.1V

2SD596 700mA 25V SOT-23 NPN Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: NPN
2. Polarisation: bipolar
3. Collector-emitter voltage: 25V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 170MHz
7. Gain H(fe): 110/400
8. Collector current:  700mA

74HC138 3-to-8 line Decoder/Demultiplexer SMD IC

Specification:-

• Type: Quad
• Mounting: SMD
• Typical propagation delay: 20 ns
• Wide power supply range: 2V–6V
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Voltage: − 1.5 to VCC + 1.5V
• DC Output Voltage: − 0.5 to VCC + 0.5V
• Low quiescent current: 80 µA 

SR20100C 100V ,TO-220AB Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Maximum average rectified current : 20A
• Peak forward surge current 8.3ms single half sine- wave : 150A
• Maximum reverse current @ VRRM TA = 25°C : 1.0mA 
• Package : TO-220AB

5KP6.5 2000µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 7.22V
• Maximum Breakdown voltage: 8.82V
• Maximum Reverse Leakage Current: 2000µa
• Maximum peak pulse current: 407A
• Maximum clamping voltage: 12.3V
• Power Dissipation: 5000W
• Package: R-6

T1117-2.5 SOT 223 Voltage Regulator Pack of 100pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 2.475 - 2.525