ALL ELECTRONICS COMPONENTS

1000 Pcs 330R Ohm (Ω) 1 Watt ±5% Tolerance 330R MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 330R ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

82uf 450V Aluminum Electrolytic Capacitors (25 x 25mm) Pack of 5pcs

Specification

• Rating Voltage = 450V
• Material = Aluminum
• Capacitor Size = 25 x 25 mm
  
• Ripple current = 0.64
  
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for "Endurance"

150K ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 1206
2. Resistance : 150K
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

0.018μF 183J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 19.0mm(W)
• Dimensions = 17.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 13.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SOT-23, ISS226 80V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : SOT-23
2. Maximum respective peak reverse voltage : 80v
3. Maximum average rectified current : 100A
4. Maxim reverse current : 0.5µA
5. Maxim forward voltage : 1.2V

0.56 inch 2 digit Green display color 7 segment LED display COMMON ANODEs pack of 50pcs

Specification:-

1. Number of digits: 2
2. Display type: 7 segment
3. Configuration: common anode
4. Number of pins: 10
5. LED color: Green
6. Operating current: 10mA
7. Length of the LED: 25mm
8. Width of the LED: 19mm

10 ohm ( Ω ) 10 Watt Fusible Ceramic Cement Power Resistor Pack of 5

Specification:-

• Resistance: 10 ohm (Ω)
• Tolerance: 5%
• Resistor type: fusible ceramic cement power resistor
• Power rating: 10W
• Can withstand in high-energy and high-voltages at high temperatures
• Reliable and offers a long service life

AO3401-30V 4A P-Channel MOSFET SOT-23 Pack of 3000

Specification:-

• Gate to Source Voltage: ±12V
• Power Dissipation: 1.4W 
• Number of Pins: 3
• Drain to Source Voltage: -30V
• Continuous Drain Current: 4.2 
• Input Capacitance: 645pF

LP4056 SOP-8 TP Chips Battery Charging IC Pack of 50

Specification:-

• Package: SOP-8
• Input Supply Voltage(VCC)：-0.3V～8V
• Programmable Charge Current Up to 1000mA
• Preset 4.2V Charge Voltage with 1.5% Accuracy
• Complete Linear Charger in SOP-8
• Constant-Current/Constant-Voltage
• No MOSFET, Sense Resistor or Blocking Diode Required

TX915-JKD-20RP 915MHz ROD Antenna for Wireless Module

Specifications:-

• Connector Type: RP SMA-J
• Type: ROD Antenna
• Frequency Range: 915 MHz
• Gain: 3.5 dBi
• Impedance: 50 ohms
• Operating Temperature Range: -20°C to +60°C

BZV55-C5V6 (SMD) 5.6V 0.5 watt Zener diodes box of 2500pcs

Features:-

• Non-repetitive peak reverse power dissipation: ≤ 40 W
• Total power dissipation: ≤ 500 mW
• Voltage tolerance: ±5 %
• Working voltage: 5.6V
• Low differential resistance
• Small hermetically sealed glass SMD package

2N5298 NPN Transistors 60V (TO-220 Package) Pack of 100

• Transistor Polarity - NPN
• Collector-Emitter Voltage (VCEO) - 60V
• Continuous Base Current (IB) - 2A
• Continuous Collector Current (IC) - 1.5A
• Emitter cut-off current (IC) - 200mA
• DC Current Gain (hFE) - 20-80
• Operating Temperature Range - (-65 - 150°C)